Related
Id like to first say thanks to Rangerbry,for his port of this for the Photon.This is his work,all I did was swap out some images,to suit my taste on my device,and wanted to share them.I use this with a stock rooted 198_7 build.If you're running an odexed build,you'll have to change the file extension of the SystemUI.odex file ,from .odex to .abk for it to take.I also swapped out the stock data icons for those from the DX,as those look a whole lot better in MHO.
http://dl.dropbox.com/u/25537380/Alien-Theme2.2.zip
http://dl.dropbox.com/u/25537380/Blur_Plus2.0.zip
Kenneths base,the aosp sliders were a morph i picked up from droidpirate,LiGux battery,signal,and data icons.The notification toggles are from and themed like n the ones in Liberty rom.The only problems,are the gps icon is distorted when its acquiring,and the "notification" bar is still ginger blue.This BlurPlus zip,undoes the Alien theme.For anyone wondering,these are based on 198_7 stock,rooted and unlocked.
The Blur Plus zip is a little combo including the first set of toggles.I replaced the saw blade spinners with GB ones colored accordingly,used ICS emotion icons,changed the default wallpaper.
I tried to flash liberty with bootstrap on jokers 4g ROM and ot didnt take. The file flashed just fine, no errors or anything, the toggles just dont show. Just an FYI to others who may try.
use root explorer and rename the SystemUI.odex to SystemUI.abk,and reboot. itll take.
pIxiLatEd said:
I tried to flash liberty with bootstrap on jokers 4g ROM and ot didnt take. The file flashed just fine, no errors or anything, the toggles just dont show. Just an FYI to others who may try.
Click to expand...
Click to collapse
Worked great with rooted 198_6.
Thanks.
Sent from my MB855 using xda premium
Couldn't managed to work with deodexed electrify 2.3.5 rom. It gave me force closes.
murrun said:
Couldn't managed to work with deodexed electrify 2.3.5 rom. It gave me force closes.
Click to expand...
Click to collapse
i tried it with the same rom my self,and got the same results. I personally didnt/dont see the advantage of the 2.3.5 rom over the 198_7 stock rom in 2.3.4
Sent from my MB855 using xda premium
pgriffinsc said:
The Blur Plus zip is a little combo including the first set of toggles.I replaced the saw blade spinners with GB ones colored accordingly,used ICS emotion icons,changed the default wallpaper.
Click to expand...
Click to collapse
First three work great on Stock 198_6. (Using the bootstrap CWM and then renaming the systemui.odex to .bak and rebooting, wiping dalvik).
However, the fourth package (Blur Plus) does not seem to work on stock rooted, locked 198_6. Luckiy I nandroid backed up prior to flashing as it caused numerous FC's on just about any auto launch program. Background was nice, but did not work. For anyone wondering.......
Funny enough,thats what led to me unlocking my bootloader,but i didnt have a backup so i had to sbf first.Idk why it would FC.Im on 198_7,and theres no difference between the two that I can see other than the known compatibility issue with some market apps.Did you flash any other theme components with it?If I use RomToolbox to change my battery or signal icons,sometimes itll do the same thing that youre describing,and then ill have to restore a backup.
cybrnook said:
First three work great on Stock 198_6. (Using the bootstrap CWM and then renaming the systemui.odex to .bak and rebooting, wiping dalvik).
However, the fourth package (Blur Plus) does not seem to work on stock rooted, locked 198_6. Luckiy I nandroid backed up prior to flashing as it caused numerous FC's on just about any auto launch program. Background was nice, but did not work. For anyone wondering.......
Click to expand...
Click to collapse
pgriffinsc said:
Funny enough,thats what led to me unlocking my bootloader,but i didnt have a backup so i had to sbf first.Idk why it would FC.Im on 198_7,and theres no difference between the two that I can see other than the known compatibility issue with some market apps.Did you flash any other theme components with it?If I use RomToolbox to change my battery or signal icons,sometimes itll do the same thing that youre describing,and then ill have to restore a backup.
Click to expand...
Click to collapse
I ended up just using the Liberty package. After the first meltdown with the plus package, I started looking at file sizes of your packages and noticed that the plus package was 5x larger than any other you offer. So that rung a bell to me that much more is being done with that one. As my ultimate goal was just to get the notification toggles, I went with a smaller one.
As I am on a stock rooted, Locked bootloader with bootstrap recovery, I want to be as minimal as possible. I read a couple other threads with similar toggles and was seeing confirmations that people were getting these to work on 198_6, locked. So I gave it another shot after restoring my nandroid from bootstrap. Second go round with a smaller package was successful (Also wiping Dalvik after flashing). I did have to manually rename the Systemui from odex to bak and reboot. Once rebooted, I had the ICS themed toggles and a nice pretty new 3G icon on my notification bar.
Outside of that, it has been smooth. No FC's or issues after flashing the smaller package.
I would have to assume the issues you are having with romtool box are linked to ROMS either being odex or deodex'd. If its a stock rom, you will more than likely have issues trying to theme things as the structure for which it works normally relies on deodex'd packages. Stock is normally odex. (Correct me if I'm wrong)
Yeah,the reason for the size difference, is because i havent exactly gotten in the habit of making an update zip with just the images.everything i uploaded are the complete systemUIs that i made and flashed on my phone.i use root explorer for all the grunt work and just keep extracted copies of all of my system ui and framework-res im separate folder for easy modifying. Then i zip it up with root explorer and sign it with zip zigner.With RomToolbox,it usually happens if i try to install one theme over another.i just use icon changer part as an icon repository. Download them,then move them around on my sd card.
Sent from my MB855 using xda premium
Hey im rooted and unlocked will this work for me
Sent from my Mopho *****
If u r on 198_6 or 198_7.
sent from my Motorola Sunfire
I'm on rooted 198_6. Installed bootstrap and flashed zip #1. Wiped dalvik and everything works great. Thanks OP.
Any chance you could do a black on green with aos icons liije the alien theme?
Sent from my MB855 MoPho using xda premium
Any chance of getting "moto on blur" to work on stock (ODEXed) locked, rooted Electrify?
This mod works great however it hides the calculator signs: + - * etc. As a short term fix ive downloaded real calc but does anyone know how to fix the problem?
Rangerbry told me what I had to do,but I havent had a chance to mess with it.Still learning as I go.
Lokifish Marz said:
Any chance of getting "moto on blur" to work on stock (ODEXed) locked, rooted Electrify?
Click to expand...
Click to collapse
black icons on a Gingerbread green background?
iamanonymous said:
Any chance you could do a black on green with aos icons liije the alien theme?
Sent from my MB855 MoPho using xda premium
Click to expand...
Click to collapse
Idk.I hardly ever use my calculator,but I checked them after I read this,and still have mine.
moisaal said:
This mod works great however it hides the calculator signs: + - * etc. As a short term fix ive downloaded real calc but does anyone know how to fix the problem?
Click to expand...
Click to collapse
Team DevDigitel & Team Blaze Present:
Stock 4.3 MJ4 Base v 2.0
STOCK kernel ( supports custom kernel) pulled from tar.
Deodexed
Zip aligned
Xposed Framework
Rooted SuperSu and Busybox installed
4 IN 1 Reboot Mod
4.3 Custom Boot Animation Support
Stock Hotspot Enabled
Loud Sound Audio Mod - Incresed Max Volume
Changed stock lockscreen wallpaper
All Knox is removed
Cleaned all old odex
Build prop edits
Alot of speed edits
Added Apps:
S Voice - added back
Greenify
Faux123 Kernel Tweaks Lite
Prl Helper
Rom toolbox lite
UCCW
Wanam Xposed (module)
Exposed Aditions (module)
Xposed Framework Installer
4.4 Calendar
4.4 Clock
4.4 Camera
Walpaperchooser -Included 2.0
Mobile Data Toggle Mod -see Zips section
Mobile Hotspot Toggle Mod - Built in with
Data toggle zip.
Removed:
Setup Wizard - no setup on first boot
Anything carrier related
Anything Manufacturer related
All sales related bloat and bs apps
Kept all hardware apps intact
No force closes.
Installation Process:
1.)Full Wipe Suggested
2.)Reboot your recovery - dont worry about no os and decline to root using twrp.
3.)NOW flash the 2.0 zip and any other mods you want..
4.) Reboot and give it time for first boot.
5.) Thank your Dev.
NOTE:
If SuperSU asks for re-root go back to
Recovery wipe cache and dalvik and fix permissions.. reboot and re-click supersu to update the binary.
***********Hit Thanks************
if you enjoy post feedback and issues posting Logcat is appreciated expecially if you want us to look at fixing your issue.
*******************************************
Downloads:
Team DevDigitel & Team Blaze
DigitelBlazed Edition 1/29/14
************Aroma Touch****************
Version 1.0 (changelog in Aroma)
http://www.mediafire.com/?goi55b1dn3f3lf0
******************************************
Version 2.0 (changelog in Aroma)
http://www.mediafire.com/?gccc3fmvyj1ljyy
*****************************************
TWRP / Aroma Known Issues:
If you get some symlinks failed.. uncheck auto reboot, then reboot recovery and reflash...should go the next time without issues... Follow install instructions next time and reboot twrp after full wipe, this is a issue with twrp and probably not going to get fixed.. Tested working with philz no issues.
*******************************************
Flashable Zips
After flashing you need to fix permissions,
If you just flashed rom you should fully boot then go back to Recovery and flash these.
*******************************************
1x3g Enabled Modded SystemUI
http://www.mediafire.com/?7tm5tnb5aq9f95c
Needs testers**
*******************************************
Data ON/OFF Toggle For statusbar
WIFIHOTSPOT Toggle combined
http://www.mediafire.com/?jd73mqk73p1daaq
*******************************************
DevDigitel 32 Walpaper Chooser -
Replaces stock Walpaperchooser app
http://www.mediafire.com/?rgfydiuks03p3sj
*******************************************
Custom - Boot Up / Down Sounds @yotaking
http://www.mediafire.com/?651uycc8pxuq9d5
******************
Stock-Boot Up / Down Sounds
http://www.mediafire.com/?7sj5uxc8l4qndq7
*******************************************
***Team DevDigitel Creative spots** *******************************************
Ultimate Custom Clock Widget - Uzip backup needs to be put in UCCW folder on internal storage. ( one from screenshot)
http://www.mediafire.com/?ysv7b35kt1ha5qy
Hd Walpapers : Over 530+ walpepers used for themes ect.
http://www.mediafire.com/?jvvsi9hyc3sacld
Project Wanam Backup And Share
Xda thread here ****
http://forum.xda-developers.com/showthread.php?t=2577207
Thanks ( More to add)
@yotaking
{Changelog}
Credits and Thanks :
I created each mod and every part of this rom soley, but ive included apps made by others or used walk throughs and other materials from the following users...
Thank you!!
JRUMMY (RomToolBox & Zipme) @LMMT @yotaking @freeza @strongsteve @kevinrocksman @JoshBeach @Skunk Ape1 @CNexus
(If you feel left out lmk and ill add you in)
Will download...nice.
Sent from my SM-N900P using XDA Premium 4 mobile app
Reserved
So far, so good. I dirty flashed, over @freeza's stock deodexed, debloated (by me), rom. Email force closed, so I just cleared email app data, and re-set up email. I made a few minor mods. I added the camera shutter sound menu, and enabled camera during calls. I also removed the power on and off sounds. Good job on the rom.:good:
Sent from my SM-N900P
Nice to see you back.
Sent from my SM-N900P using Xparent Skyblue Tapatalk 2
Running very smooth. No issues so far.
I also grabbed a 5x5 TW launcher from here, works perfect.
Hey thanks for rom it's running great so far I'll keep updating. ...
sent from my AWESOME NOTE 3
Ill be updating rom tonight to include the data togle mod as well
as some other minor Tweaks. . Hopefully will have the aroma
setup done by sunday so you can flash each part individual to you
I'm not able to dl. Can we e get another link?
rogerandgina said:
I'm not able to dl. Can we e get another link?
Click to expand...
Click to collapse
http://www.mediafire.com/?9ixn3v22e2od8ev
Link seems good?
Team DevDigitel said:
Ill be updating rom tonight to include the data togle mod as well
as some other minor Tweaks. . Hopefully will have the aroma
setup done by sunday so you can flash each part individual to you
Click to expand...
Click to collapse
Dont forget make too mod 1x3g sir. Thx beforee
Sent from my SM-N900P using XDA Premium 4 mobile app
Bootloop after installing, any ideas how to fix?
used chains root on stock install, flashed twrp and installed your ROM. See the boot animation and start up sound, but my Note 3 just states on boot animation.
Never could get this to flash. Just hung up boot animation....I'll try again later
Sent from my SM-N900P using Tapatalk
Same here clean install thru twrp wiped factory data reset wipe cache and dalvic and still stuck on boot animation
Sent from my SM-N900P using XDA Premium 4 mobile app
I couldn't get it to boot either. Downloaded twice.
Sent from my SM-N900P using XDA Premium 4 mobile app
Im going to repack again tonight . Some users report no error some do
are we wiping dalvik and cache after flash? Anyone have log cats to review?
1.4 gigs is alot to re load for bad link im pushing last mods and will have before nights
end.. sorry guys I rushed first release after app issue.. again
ill have a clean link tonight and will flash myself aswell to test.
I didn't have any problems with it booting. But, I flashed @freeza's kernel the first time. Then I wiped, flashed again, and used @Imoseyon's lean kernel.
Sent from my SM-N900P
I'll wait on the next release with mods installed
Sent from my SM-N900P using Tapatalk
May need to install kernel.. im packing rom as we speak..
all but 1x 3g mod are in.. I have to pull the systemui.apk and fix
I tried to push on phone but caused full apk fail / boot issues.
Heres where roms come from. ...
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
I'm gonna give this a try tonight. Thanks!
Sent from my SCH-I545 using XDA Premium 4 mobile app
Awesome work! already running the SS restore version and its excellent! I'll give the zip install version a whirl and see how she looks.
new vers
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
gigilie said:
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
Click to expand...
Click to collapse
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no go
Hopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
+1 using foxhound. I love that ROM but am having the same problems as above. Won't connect to work network and keeps searching and obtaining IP address but never connects and kills battery. Used data on way home for maps and signal said 4g but Google said not connected had to switch back to stock and all was fine...shame cause I love foxhound.... Using ss 3.71 on MK2
Gator Brah said:
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no goHopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
Click to expand...
Click to collapse
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
sure i'll do testing on that. I wont be back at work until monday to test out the wifi though.
Loaded this rom via safe strap restore with no issues. Working on getting everything setup. No issues encountered to this point
No issues with wifi...
Sent from my SCH-I545 using XDA Premium 4 mobile app, but battery life is horrible. Sitting overnight went from 70% to 12% this morning.
gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
So the first fix didnt change anything unfortunately. Flashed the second zip and on reboot had a ton of FC errors and couldn't even unlock the screen. Restarted again and it was pretty much soft bricked...had to restore from backup.
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Alxoom33 said:
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Alxoom33 said:
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Click to expand...
Click to collapse
it shouldnt do anything to an SD card
Thanks, re flashed and fixed issue.
Sent from my SCH-I545 using Tapatalk
I thought it would be helpful to share my post from the Foxhound thread on installation of Omega on MDK http://forum.xda-developers.com/showthread.php?p=49744674
[ROM]Foxhound Diamond Dogs 3.6 TW-4.3-MK2/AnyCarrier-SS-KNOXfree-CLEAN-FAST-THEMED
Gigilie, I would be happy to walk through Omega instillation on MDK. It's very easy.
Before you start make sure you downloaded Omega. v. 19. I used the .zip version and reccomend flashing .zip for all MDK recovery based installs. Also dl the most current ktoonsz 4.3 tw kernel. The version in Omega did not work well and a fresh install is best. Also dl any mods you like, such as those you might use with HD or other 4.3 TW roms.
1. Using recovery, I use TWRP 2.6.3, be sure to make a back up nandroid of your current rom.
2. Wipe. A full factory wipe is best.
3. Flash Omega v. 19 and the new ktz kernel and wipe cache and Calvin for good measure (not absolutely necessary).
4. Reboot, set up and give the rom some time to set up and load your backuped apps from the playstore.
5. Go back to recovery and flash your mods.
If you are brave or foolish, restore only the data from your 4.3 or 4.2 TW Nandroid.
If you start getting fc's then wipe data, and reload your data and apps manually from the playstore and or from Ti backup. I found that data from my HD 12 Nandroid was compatible with Omega. I was using the S4 UI in HD v. 12, not the Note 3 UI; and data from other setups may not play well with Omega v.19.
That's it. Easy peasy. Have fun!
Sent from my Xoom Wifi using Tapatalk
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
Actually it was with MDK. For MJ7 you need Safestrap.
Sent from my Xoom Wifi using Tapatalk
lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
they should be there... if not grab the apk from the play store
i chek in on this bad boy everyday or every few at least and with over 550 downloads (thousand views) and only 2 pages for a thread this rom must be pretty damn stable otherwise thered be floods of ppl i think? anyway thanks for trying it guys please post some ant benchmarks with pics in here or any of my roms i'd appreciate it the whole Unmatched quote in HD bugs me as all my roms score higher and are faster and work just as well on battery so i dont know what their talking about just want confirmation of this plz guys
gigilie said:
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
Click to expand...
Click to collapse
Failed due to "no partition selected." I noticed on second try that the usual check box partition options was blank. I tried mounting all the partitions to no avail. Please help--thanks
Edit: I forgot to mention it is the Restore version.
Just thought we needed a trimmed Rom to tide us over til CM/AOSP/Lolipop comes along. This is about half the size of the original factory ROM. So may I introduce...
BARREN Odex & Deodexed
See Post #2 for addons and minor updates
Anybody can use this as a base. All I ask is a little credit.
Disclaimer: You install this at your own risk!!!
What is it?
This is a Stock Rom that is slimmed down, with very little bloat. Odexed and Deodexed versions
No Sprint dl'ing
No LG dl'ing
Wifi calling installs every single time!
What it has - Change log
Code:
V3
First Sprint Rom that installs a kernel. Can you say "BUMP'd!"
init.d support through the kernel
added more init.d scripts. Helps performance and battery, I hope.
Updated to the current mixer paths - should be good to go
Removed a couple, now useless apps for Barren
V2.1
Fixes in updater-script and busybox. [B]If you're on V_2 update to this. I had some mistakes. [/B]
Read [url=http://forum.xda-developers.com/showpost.php?p=56596984&postcount=248] Here [/url]
V2
All the goodness from V_1 series
Added init.d support
SQLite
Zipalign on every reboot - /system/app, /priv-app, /data/app
Removed - LG File Manager,maybe some others
Added into /data - updated and removable - LG Keyboard, Estrong File Explorer, Sprint VoiceMail, GoogleSearch, Xposed, G3 Tweakbox
Probably other minor things I can't remember
V1
SuperSu
busybox
zipaligned
build.prop edits - All split window, dalvic heap correction
Ext Sd card fix - you don't need an app for this now
Mixer paths - Increases volume - [B]THIS CAN DAMAGE YOUR SPEAKERS!![/B] You've been warned!!
LG Stock Boot animation
Google keyboard only - Removed LG Keyboard and Swype
Removed too many things to list
Maybe some other things i forgot
To install:
Make a backup in TWRP first! And always make sure you've backed up your EFS.
In TWRP, select "Wipe", "Advanced", and select /system, /data, /dalvic, and /cache. DO NOT select "Internal, or ext SD!
Flash zip
Profit!!!!
On first boot:
You may not have reception. Use Wifi or add accounts later
Just acknowledge LG agreement - it won't install anything
Go to Settings and update profile/PRL.
Subsequent boots/reboots:
You may get a Gapps warning. This is OK. Google Search is no longer a /system/app. It'll be in /data, if you download it.
Bugs:
None that I know of. You tell me
Possibly on V2 Play Store not updating properly - time will tell
Donators (Never asked for, but always appreciated - Thank you)
** @mjjcb
** @nkyer
Downloads:
D_3
Barren_D_V3
D_V2.1
Barren_D_V2.1
D_V2
Barren_D_V2
V_1.3
Download and install V_1. Then install V_1.3. Contains new mixer paths for everything and a build.prop hoping for better battery. See Post #2
V1.2.5
Download and install V_1. Then install V_1.2.5 Contains 1.1 also - See Post #2
V1.2
Download and install V_1. Then install V_1.2. Contains 1.1 also. See Post #2
V1.1
Download and install V_1. then install V1.1. Works with both Barrens and ZV4 Stock. See Post#2
Barren_Deodexed_V1 - This may progress further depending on LG Update/Lolipop
__________________
Barren Odexed - This is as far as this one will go. It's too hard to keep up more Rom's
ADDONS AND MINOR UPDATES
V_1.3 - New mixer paths for everything and build.prop hoping for better battery Here
Works with both Barren and Stock ZV4
____________________
V_1.2.5 - Reverted to 1.1 build.prop with BT volume increase Here - Will work with both Barrens and Stock ZV4.
_____________________
V_1.2 - BT volume increase Pulled
_____________________
V_1.1 - Build prop - Here - Will work with both Barren and Stock ZV4
___________________
Add Conceirge and Weather. HERE - Deodexed
Add Concierge and Weather. HERE - Odexed
and
To add other apps - This I'm gonna leave for you to work on. Heres how:
If you want any other app from the stock ROM, you'll need to pull it from a Stock ROM and place it in either /system/app or /system/priv-app BEFORE you flash this zip. Use 7zip or Linux and open the zip and place the apk in the appropriate folder.
In TWRP, wipe /cache and /dalvic ONLY
Flash ROM
Profit!!!
You will need to start from scratch. So flash Barren, wipe cache and dalvic. Flash Concierge and reboot.
It SHOULD work properly and did when I tested it. You add this on your own.
Hell yeah. First. Thanks for this.
Yes indeed good sir, thank you very much, been waiting for something like this. Thanks again.
Sent from my LGLS990 using Xparent Green Tapatalk 2
Awesome... Downloading now.....
Hey I didn't have root access with the deodex ROM was that just me or is that normal
Sent from my LGLS990 using XDA Free mobile app
generalkrank said:
Hey I didn't have root access with the deodex ROM was that just me or is that normal
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
It's there. Is SuperSU installed? I've flashed these Rom's multiple times and had root every time
engine95 said:
It's there. Is SuperSU installed? I've flashed these Rom's multiple times and had root every time
Click to expand...
Click to collapse
Never mind dude I flashed with twrp directly instead of flashify and everything is fantastic. Great job buddy
Sent from my LGLS990 using XDA Free mobile app
generalkrank said:
Never mind dude I flashed with twrp directly instead of flashify and everything is fantastic. Great job buddy
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Interesting. I don't use Flashify. lol I've always just flashed with TWRP/CWM
engine95 said:
Interesting. I don't use Flashify. lol I've always just flashed with TWRP/CWM
Click to expand...
Click to collapse
Yeah I won't use it anymore I will just use recovery
Sent from my LGLS990 using XDA Free mobile app
I'll give the deodex a whirl
Running great.. Zero issues so far.. Love it being debloated
Me too. So far so good. Thanks again.
So i flashed this rom, and right away i noticed something odd. The sprint bloat installed itself, is that supposed to happen? Also, the LG keyboard is still the default keyboard.
Great work. Downloading meow
Sent from my LGLS990 using XDA Free mobile app
Still got all the bloat ware
R2DeeTard said:
So i flashed this rom, and right away i noticed something odd. The sprint bloat installed itself, is that supposed to happen? Also, the LG keyboard is still the default keyboard.
Click to expand...
Click to collapse
cashvillain said:
Still got all the bloat ware
Click to expand...
Click to collapse
That's weird. I've installed these roms, testing them, multiple times, and not once did I get Sprint bloat. Lg downloaded one time but the update failed.
Did you both wipe all 4?
I really don't know why it's doing that. But let's see if others get the same thing. I'll still look at it.
cashvillain said:
Still got all the bloat ware
Click to expand...
Click to collapse
Are you all sure it's not just the playstore downloading them after a reinstall. I always open the store first thing and say stop and then check don't auto update. Just a thought. I've installed and have no bloat.
R2DeeTard said:
So i flashed this rom, and right away i noticed something odd. The sprint bloat installed itself, is that supposed to happen? Also, the LG keyboard is still the default keyboard.
Click to expand...
Click to collapse
Just downloaded, installed, prl update and profile update. Not one sprint app self installed or reinstalled. Signed into platsrore and golden. On the d version.
Sent from my LGLS990 using XDA Free mobile app
engine95 said:
That's weird. I've installed these roms, testing them, multiple times, and not once did I get Sprint bloat. Lg downloaded one time but the update failed.
Did you both wipe all 4?
I really don't know why it's doing that. But let's see if others get the same thing. I'll still look at it.
Click to expand...
Click to collapse
I know i did the first time, but right after I made my comment I went back and re-wiped/re-flashed. all is good now, I have no idea what happened. Great job on this!
After trying to install safestrap to my verizon note 2 for many times with failure.
Today suduenly i tried again to reRoot my my ND7 android 4.4.2 note 2 with locked bootloader and try it again
i used ghettoroot-v0.2.2 within the attachment and after rooting and before installing safestrap i went directly to google play store
and updated my super su and after the update i launched super su and it asked for if i want to upgrade the su binary and i did
and after the reboot i installed safestrap and magic happend it is working and i do not have any idea what happend it is working
I tried to install this rom called - DN3 (Ditto Note 3) ROM from E-team and at first i create a rom slot and flashed over it but it failed to start and that is when i decided to flash over the stock slot and it worked ...
so all you need to do is
1 - root using ghettoroot-v0.2.2
2- update you super su
3- update su binary and reboot
4- install safestrap and reboot to it
5- wipe cach and dalik cache
6- flash the DN3 rom without removing the boot.img since their is no need for that .
7. your device got a new life
you can confirm from the screenshot below and have nice time every one
i added the updated super su apk within the attachment
#Wifi Fix
For those facing wifi problems with dn3 rom i have managed to solve that by using some files from aliance 4.4.2 rom
i copied the following files from alliance 4.4.2 rom to the dn3 zip file before flashing and wifi is working now
1 - i replaced the files directly within the /system folder not touching the the folders or sub files within the folders just the files directly within the /system
and wifi now works on dn3 (ditto)
Your phone is not a verizon GN2. You have a GT7105 which is the GSM model. This method still does not work for us.
jollybluehornet said:
Your phone is not a verizon GN2. You have a GT7105 which is the GSM model. This method still does not work for us.
Click to expand...
Click to collapse
My Phone is Verizon SCH-I605 note 2
what you see in the screenshot is the result of installing dn3 (ditto )rom cause dn3 rom was ported to work on SCH-I605 without changing the build.prop
this method is completey working
Then I am mistaken. My bad
Hello guys, then the method works, just that I've done with the root Ghetto Root and it worked the same !!!
Nice so it works?
Sent from my SM-N910V using XDA Free mobile app
So, yes it does work. However, I am now stuck on Ditto3 with no wi-fi, a very slow 4G connection, no safestrap, and I cannot get back to stock ROM to try to reflash Ditto3 until I can get some wifi up in this.
What can I do now?
TheJOJ said:
So, yes it does work. However, I am now stuck on Ditto3 with no wi-fi, a very slow 4G connection, no safestrap, and I cannot get back to stock ROM to try to reflash Ditto3 until I can get some wifi up in this.
What can I do now?
Click to expand...
Click to collapse
you have to root your ditto 3 the same way you rooted your nd7 and update your su and su binary and install safaestrap then you will be able to flash another rom i have updated post #1 you can find the new su within the attachment
i am still trying to find a way for the wifi to work
i will be trying this rom : [Rom][4.4.2] AllianceRom_VZW Build 30 - 32 Themes [11/29/14][Fully Customizable][ND7]
and hope wifi works out of the box , i will report later
iamakrem said:
you have to root your ditto 3 the same way you rooted your nd7 and update your su and su binary and install safaestrap then you will be able to flash another rom i have updated post #1 you can find the new su within the attachment
i am still trying to find a way for the wifi to work
Click to expand...
Click to collapse
Excellent! Got it. Now using Alliance ROM 4.4.2 Build 30. Everything is checking out so far. I have a question still, however. Why is it that these larger - in file size - ROMs (like Ditto 3 and Alliance) work, but the smaller ones such as Liquid do not seem to work?
TheJOJ said:
Excellent! Got it. Now using Alliance ROM 4.4.2 Build 30. Everything is checking out so far. I have a question still, however. Why is it that these larger - in file size - ROMs (like Ditto 3 and Alliance) work, but the smaller ones such as Liquid do not seem to work?
Click to expand...
Click to collapse
Those roms that are not working need their own kernel which we are not allowed to flash using safestrap since we have a locked bootloader
safestrap allows as to flash roms but not kernels ... so i belive almost only any rom that is compatible with the nd7 kernel will work
One other question. I wiped everything but MicroSD, and System on Alliance. I seem to be getting some hitching in the performance every so often, and fairly high RAM usage with no easy way to clear it like in stock 4.4.2 in taskmanager. Could the hitching be linked to the skipping of the "system" wipe, or to the RAM? Was I supposed to wipe system?
For those facing wifi problems with dn3 rom i have managed to solve that by using some files from aliance 4.4.2 rom
i copied the following files from alliance 4.4.2 rom to the dn3 zip file before flashing and wifi is working now
i am not an expert and that is why i cannot specify the file that had solved the problem but i will list all the files i replaced down
1 - i replaced the files directly with the /system folder not touching the sub files within the folders just the files directly within the /system
and wifi now works on dn3 (ditto)
Works well now
No problems on Alliance
Hi guys, we need to change what files in / system to operate the Wifi? No one has described in the thread!
Anyone answer this please?
Sent from my SCH-I605 using XDA Free mobile app
HELP!!!
TheJOJ said:
Excellent! Got it. Now using Alliance ROM 4.4.2 Build 30. Everything is checking out so far. I have a question still, however. Why is it that these larger - in file size - ROMs (like Ditto 3 and Alliance) work, but the smaller ones such as Liquid do not seem to work?
Click to expand...
Click to collapse
How did you get Alliance to work? I flashed it 3 times using safestrap and nothing.
Takiyon said:
How did you get Alliance to work? I flashed it 3 times using safestrap and nothing.
Click to expand...
Click to collapse
Well, first I flashed Ditto 3, then flashed Alliance, but noticed some weird things going on with the UI so I went back, wiped System in addition to Cache, Dalvik Cache, then reflashed it. I still have been having issues with the system-wide lag. It is especially apparent when typing with the keyboard, and changing the keyboard did not help.
Let me know if that helps. Also, make sure you are flashing over the stock slot.
This worked great thanks for the tip on the WiFi. For those that weren't clear what worked was: download alliance rom and dn3 rom, open file explorer one window for each rom, go to system folder scroll down and replace only the available files not folders (in build prop etc) into the dn3 rom
Sent from my SM-G900F using XDA Free mobile app
benfikaman said:
This worked great thanks for the tip on the WiFi. For those that weren't clear what worked was: download alliance rom and dn3 rom, open file explorer one window for each rom, go to system folder scroll down and replace only the available files not folders (in build prop etc) into the dn3 rom
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Hi, I understand but what files should I replace? Be more specific please?