Hi all,
******************************************
Main thread for this project here
******************************************
************************************************** *
Use m2d manager with Tasker App http://www.pacosal.com/desarrollo/20...h-m2d-manager/
************************************************** *
I'm working on a project to send commands between 2 devices in order to use one of them as an auxiliary gadget called My Second Device.
However I think that Omate truesmart could be a good auxiliary device for this test.
If you can test the App continue reading...
- m2d manager is the App that connects 2 devices over bluetooth and send and receive messages from one device to the other. It's a service that must be running always.
To give functionality to m2d manager there are, right now, 2 Apps relate to notifications.
- First one is Voice for Notifications Android 4.1+
- Second one is an App that receive notifications and shows you as a list with the notification content.
I don't have a truemate yet and that's why I can test if this works ok on truemate, but I've done test with other mobiles and galaxy gear as well.
If you can test it, make this:
- Install m2d manager
- Be sure you have your mobile and truesmart paired
- Run m2m manager in both devices
- Select the paired device and press Connect.
- Wait to see is both devices are connected
If so:
- Install Voice for notifications (Android 4.1+) on your mobile. More later go to settings and quit voice if you don't want it.
- Install m2m Notifications receiver on your watch
Tell me if this is working for you!
DOWNLOADS
Manager
m2dManager https://play.google.com/store/apps/details?id=com.pacosal.m2d.manager
Notifications
m2dNotificationsReceiver https://play.google.com/store/apps/details?id=com.pacosal.m2d.notificationsreceiver
Voice for Notifications (Android 4.1+) https://play.google.com/store/apps/details?id=com.pacosal.vforn
Media Remote
Sender https://play.google.com/store/apps/details?id=com.pacosal.m2d.remotepicturesender
Receiver https://play.google.com/store/apps/details?id=com.pacosal.m2d.mediaremotereceiver
Thanks
Is there any way you can post test apks as the TS does not have Play Store installed and needs to be properly rooted and patched as well.
Lokifish Marz said:
Is there any way you can post test apks as the TS does not have Play Store installed and needs to be properly rooted and patched as well.
Click to expand...
Click to collapse
Sure!
Bluetooth issue?
So I went ahead and tried this combo out...not sure if it's my Nexus 5 and the ROM it has, or if it's because of my Omate, but the Bluetooth connection will drop every 5 min or so if there is no activity. I tried disabling the WiFi 5ghz frequency band on my Nexus 5 to see if that might alleviate the issue, but that didn't help either. I might go ahead and try disabling WiFi on both devices and seeing, but I'm at work now and currently keeping myself sane with streaming music
Thanks for your test.
This Apps no drop Bluetooth connection in general.
Please, enable debug at both devices and after some time when this happens, send me the file you will find at the root of your sdcard in both devices.
Thanks
Okay, I'll do that
Sent from my Nexus 5 using Tapatalk
Working in a new version in order to fix connection problems for truesmart.
the issue is most likly not your app but the ts BT. the ts will not keep a BT connection to anything. after anywhere were fron 2 mins to five mins the bt connection is dissconnected
rhineymac said:
the issue is most likly not your app but the ts BT. the ts will not keep a BT connection to anything. after anywhere were fron 2 mins to five mins the bt connection is dissconnected
Click to expand...
Click to collapse
I got over 8 hours with EasyTether last night...
Hi,
I've released another version of m2d manager. Please, try this one. It's attached to first post as well.
And if you want to try more features...
I've released version 1.2.0 of m2d media remote sender and receiver.
New option enables you to manage one device from the other one. It's more a proof of concept than any valid thing, but I think is worth to try it.
The sender device must be rooted and with permissions in order this to work. I have to record a video.
For example you can try to manage your truesmart from your mobile.
Regards
pacosal said:
Tell me if this is working for you!
Click to expand...
Click to collapse
Hi, pacosal.
My intention is to use your apps as a possible substitute of Osmart companion (that doesn´t works for me until now). I don´t know if this is possible or your apps are designed to work differently.
Anyway, I have tried these apps ('m2d Manager', 'm2d Notifications Receiver' and 'Voice for Notificatons') using a Nexus 5 as main device and my Truesmart as second device. Both devices paired correctly (they vibrate at the same time when the pairing occurs) and the apps seem to work, but when the Nexus 5 send a notification to the watch, the main app closes and I can´t run it again, only restarting the phone (curiously, before the app closes, the phone sends a notification from m2d to the Truesmart!).
I don´t know if this issue is due to a Nexus´ incompatibility or due to the Truesmart´s firmware.
huelvy said:
Hi, pacosal.
My intention is to use your apps as a possible substitute of Osmart companion (that doesn´t works for me until now). I don´t know if this is possible or your apps are designed to work differently.
Anyway, I have tried these apps ('m2d Manager', 'm2d Notifications Receiver' and 'Voice for Notificatons') using a Nexus 5 as main device and my Truesmart as second device. Both devices paired correctly (they vibrate at the same time when the pairing occurs) and the apps seem to work, but when the Nexus 5 send a notification to the watch, the main app closes and I can´t run it again, only restarting the phone (curiously, before the app closes, the phone sends a notification from m2d to the Truesmart!).
I don´t know if this issue is due to a Nexus´ incompatibility or due to the Truesmart´s firmware.
Click to expand...
Click to collapse
You need to get him a logcat.
Hi,
any new feedback about using M2D on your Omate?
pacosal said:
Hi,
any new feedback about using M2D on your Omate?
Click to expand...
Click to collapse
Ok im trying this for the first time and so far i got the apps installed in both the phone and watch. i get a lot of force closed on the manager app on the watch when notifications are sent. it is not notifying the watch at all but i do see the logs in the voice notification app on the phone.
---------- Post added at 11:53 AM ---------- Previous post was at 11:28 AM ----------
nkognegr0 said:
Ok im trying this for the first time and so far i got the apps installed in both the phone and watch. i get a lot of force closed on the manager app on the watch when notifications are sent. it is not notifying the watch at all but i do see the logs in the voice notification app on the phone.
Click to expand...
Click to collapse
ok i installed the bluetooth rom and im not getting the notifications on the watch. the notifying app gets them but dont actually see the message!
nkognegr0 said:
Ok im trying this for the first time and so far i got the apps installed in both the phone and watch. i get a lot of force closed on the manager app on the watch when notifications are sent. it is not notifying the watch at all but i do see the logs in the voice notification app on the phone.
---------- Post added at 11:53 AM ---------- Previous post was at 11:28 AM ----------
ok i installed the bluetooth rom and im not getting the notifications on the watch. the notifying app gets them but dont actually see the message!
Click to expand...
Click to collapse
Have you installed this App in your omate?
https://play.google.com/store/apps/details?id=com.pacosal.m2d.notificationsreceiver
and Voice for notifications in your mobile?
Did not work on OUI 2.1
Tried this, but could not get it to work on my Omate.
Mine have the build Omate_TrueSmart_20140513.103530_V2.0
And Omate version OUI 2.1
Related
Update: TexTab has been released in the market! Thanks to everyone who participated in the beta. Download links:
- Full Version
- Lite Version
TexTab is an SMS app for Android tablets. It allows you to connect your Android 2.1+ tablet to your Android 2.1+ phone over Bluetooth and send/receive SMS messages on your tablet as if you were sending them from your phone.
I've been working on this app for some time now and I feel that it is ready for public beta testing. I encourage everybody to download and install the app on both your phone and tablet, and please provide feedback here.
App Features:
- Honeycomb optimized, though not required
- Push menu button to connect devices via bluetooth, with option to select a device to automatically connect to in settings
- Conversation threads use your Google contact information to display contact info
- Widget with button to enable/disable service, and displays connection information
Known Bugs:
- Messages not saving to outbox on some devices
- Sometimes unable to connect from one device. Seems to fix after turning bluetooth off then on, on OTHER device.
- Delivery reports are not always reliable, when messages are sent or received very quickly
- Visual issues/ghosting when using Swype keyboard in portrait orientation
- Performance issues on Samsung Galaxy Tab 7"
Future Development/Requested Features:
- New layout for 7" tablets
- Wifi functionality for increased range
- UI improvements
- Option to sync contacts with phone rather than cloud
- Sync sms history with phone
- Option to mute phone notifications
- Mark incoming messages as "read" on phone
- Popup dialog on received message when app is not in foreground
- MMS support
- Ability to use existing SMS app (GoSMS, Handcent, etc) to send/receive messages on ANOTHER phone
- suggestions?
Installation and Use:
Download the attached zip file and extract it somewhere on your computer. Copy the extracted file, TexTab.apk, onto both of your devices. Find the .apk file using File Manager or your favourite file browser and run it on both devices to install. Once installed, you can access it like any other app, and you can long-press on the homescreen to add the widget.
Once in the app, push the menu button to connect to a paired bluetooth device. If your devices are not paired, simply make one of them discoverable using Menu Button > Make Discoverable and then on the other device use Menu Button > Connect a Device > Scan for Devices to pair the two devices and establish a connection.
Once a connection is established, the devices should show their proper views. If not, click the settings button and change the Device Type. Under settings, you can also select the option to automatically connect to a paired device on startup. You can also enable or disable the bluetooth service under settings, or by using the button on the widget.
To send a message, either type a phone number into the Phone Number... field, or tap the Send To... button to choose a contact from the cloud. Type the message in the Enter a Message... field and tap send. Received messages will automatically show up as long as the app is enabled.
I look forward to any feedback/bug reports/praise/insults you may have!
Changelog:
See attached text file
This sounds awesome! Thanks a lot man.
Could you maybe throw up some instructions for everyone...
Edit: works great so far. Looking foward to the updates!
I updated the OP with installation and usage instructions. Let me know if they're not clear!
Cant wait to give this a try! Awesome
Will deffinately try this, sounds like what I've been looking for!
You say Future Development for WiFi, 2 ways I could suggest to have that.
1) If the tab is tethered to the phone for data (this is how I get my WiFi only tab to have data at work)
2) If they are on the same WiFi network, say I'm at home. Phone is connected to home WiFi and tab is connected to home WiFi.
Just some thoughts
*Edit*
Ok, tried it out and thats pretty cool! I like how the message shows up on the phone and the tab. Is there a way to pull down recient conversations (say from the last 24 hours) incase you wanted to continue a previous conversation? Also, if read on the tab or phone, could it show read on the other device?
wingman1487 said:
If they are on the same WiFi network, say I'm at home. Phone is connected to home WiFi and tab is connected to home WiFi.
Click to expand...
Click to collapse
This is exactly how the wifi support will work. It will still require the connect to device step, but the range will be limited by your wifi network rather than your phones bluetooth signal.
wingman1487 said:
Is there a way to pull down recient conversations (say from the last 24 hours) incase you wanted to continue a previous conversation? Also, if read on the tab or phone, could it show read on the other device?
Click to expand...
Click to collapse
I've toyed with the idea of syncing sms history with a contact, unfortunately though any operations which involve using sms history are unsupported in the Android SDK and could break my app in the future. Marking a message as read is subject to the same problem. I'll look into it some more.
I appreciate the feedback, keep it coming!
I wanna suggest something, look at the app called texter, and the chrome app, then take a look have they work. They work by signing in on your google account on an app on the android phone, and the signing in at the same account on chrome, npw you can sms from chrome throw your phone and recive them, no matter where your phone is, it just need 3g connetion. This is like chrometophone. If you could get it working in this way it would be awsome! And the ofc still the bluetooth or something other when the tab not have internet connection
Loving this app so far, just wanted to report a bug. When a new contact sends a text, it seems to duplicate the view of prior conversations. I have one conversation that's up to three alternate views!
Edit: After a reboot, the duplicates disappeared.
Fisken said:
npw you can sms from chrome throw your phone and recive them, no matter where your phone is, it just need 3g connetion.
Click to expand...
Click to collapse
I will look into this, thanks!
cekle said:
When a new contact sends a text, it seems to duplicate the view of prior conversations. I have one conversation that's up to three alternate views!
Click to expand...
Click to collapse
Thanks, added it to the list. As a temporary fix, tapping the settings button and then tapping back will reload the contacts list and they should disappear.
Also I can't seem to delete conversations by long pressing. Is there another way?
I haven't implemented this. I'll consider it a feature suggestion! Are you wanting to delete specific messages within a thread, or whole thread for a contact?
I was actually working on something exactly like this. I did not end up getting much work done though. If you would like any help, just let me know.
Dude, your App is awesome ! ive searched for days for something like this. the only other option is syncsms and that one doesnt support "push", only "all 5 min sync". But your solution via bluetooth is just awesome
ive allready installed it on 5 different transformers for my friends. we are all very happy and would like to donate for your work.
As soon as your App is final, you should totaly put it on market for 1-2$ or more. you will be rich buddy !
Greetings from Germany, keep up the good work. ive allready bookmarked your thread =)
PS: Could you implement the function to mute the notification sound?
smaskell said:
I was actually working on something exactly like this. I did not end up getting much work done though. If you would like any help, just let me know.
Click to expand...
Click to collapse
I won't name any names, but there is at least one other implementation of this idea. My app goes about it a little bit differently.
Deadwalk said:
ive allready installed it on 5 different transformers for my friends. we are all very happy and would like to donate for your work.
As soon as your App is final, you should totaly put it on market for 1-2$ or more. you will be rich buddy !
Click to expand...
Click to collapse
Thanks! I'm glad you like it. It will eventually be a paid app on the market, but not until I feel its complete enough to justify charging money.
Deadwalk said:
PS: Could you implement the function to mute the notification sound?
Click to expand...
Click to collapse
Adding it to the list.
howettl said:
I haven't implemented this. I'll consider it a feature suggestion! Are you wanting to delete specific messages within a thread, or whole thread for a contact?
Click to expand...
Click to collapse
Just a contact thread. Specific messages would be a good option if you want this to be a full fledged texting app, but then the deletion wouldn't propogate to the phone without some magic. If this app is intended to be a messenger though, an extension of the phone when the tablet just so happens to be around, I'd like the ability to keep that interface clean and current so its not bogged down with out of date texts.
Edit: Keeping with the 'extension of the phone' idea, you could have an option to clear the text database after a certain amount of time disconnected from a device.
a friend of mine just told me that his phone is acting wierd.
he installed the app and send me 5 texts over his pad and i got them all. but his phone wont show what he wrote and in his phone there are only the sms from me and not his. we both use the lg optimus 2x.
and also his phone send 2 sms to the number "555555555" with text "default body". right after he installed the app and tried to send texts over his pad.
any idea?
Deadwalk said:
a friend of mine just told me that his phone is acting wierd.
he installed the app and send me 5 texts over his pad and i got them all. but his phone wont show what he wrote and in his phone there are only the sms from me and not his. we both use the lg optimus 2x.
and also his phone send 2 sms to the number "555555555" with text "default body". right after he installed the app and tried to send texts over his pad.
any idea?
Click to expand...
Click to collapse
I have an idea about what's happening here. As I mentioned in an earlier post, any operations that involve your phones SMS history are unsupported in the Android SDK. It sounds like your particular phone model doesn't access SMS history in the same way as other phones, so the app is unable to save sent messages in your phones SMS history.
The number "5555555555" and "default body" are used when there is a problem saving the data to your phone. The phone was told that a message was sent to that number; but no SMS was actually sent.
I'll try and find a workaround for this phone.
Do other people using this phone model have the same problem? Or any other LG phone?
No one else have that issue.
we both use the same lg and we both use a modaco rom. the only difference is, iam using modaco version ~16 and he version ~19. so the problem should lie in the difference of that roms. he just got furios because he tought the app had send 2 sms to a pricy number...
after reading your explanation we saw that everytime he sends a text to me he got a 55555555 sms with default body, so its realy the fact that his phone cant save the textmessage into the threaded sms history. its send, but not saved. on the other hand it flawlessly work on my phone. i can send a text on my pad and see it almost directly on my phone in the threaded history. funny tho =) now we're gonna flash his phone to another rom.
i'll keep an eye on this thread. it would be realy cool if you would mention it somewhere when u think u found a workarround. we will test it then =)
ah and we found another bug just now. when i want to write a new sms to contactB i have no choice to choose the number to send. so my girlfriend for example have 3 different numbers, and the app want to use the first number of the contact, in this situation its her home number.. no way to send a sms to that one ^^
Deadwalk said:
No one else have that issue.
we both use the same lg and we both use a modaco rom. the only difference is, iam using modaco version ~16 and he version ~19. so the problem should lie in the difference of that roms. he just got furios because he tought the app had send 2 sms to a pricy number...
after reading your explanation we saw that everytime he sends a text to me he got a 55555555 sms with default body, so its realy the fact that his phone cant save the textmessage into the threaded sms history. its send, but not saved. on the other hand it flawlessly work on my phone. i can send a text on my pad and see it almost directly on my phone in the threaded history. funny tho =) now we're gonna flash his phone to another rom.
Click to expand...
Click to collapse
Thanks for the clarification. It must be an incompatibility with the rom then.
I'll repeat for clarity: when you see a message to the number "5555555555" its simply a problem with the phone not saving the information properly. An SMS has NOT been sent to this number.
Please let me know if flashing a different rom fixes the problem!
Anyone got Skype working on rooted Nook Tablet?
I think this is the major differentiation over the KF due to presence of microphone and one of the guys who owns a rooted table should try this out, so that others can decide
http://http://forum.xda-developers.com/showpost.php?p=16643098&postcount=1193
Try theos0o modified Skype apk
http://forum.xda-developers.com/attachment.php?attachmentid=688562&d=1313338192
I use his Skype apk with a Motorola H700 bluetooth headset.
Works for me
It seems to be working fine for me.
Have only done one voice call tho. Chat is fine. Not sure which apk - i just google for one and installed it. I dont have the full market installed yet - been ableto find apk's for apps I use.
kgingeri said:
It seems to be working fine for me.
Have only done one voice call tho. Chat is fine. Not sure which apk - i just google for one and installed it. I dont have the full market installed yet - been ableto find apk's for apps I use.
Click to expand...
Click to collapse
Does Skype recognize an internal microphone?
I've heard there is a problem:
"I had no problem installing the Skype app or logging into my account. But the app wouldn’t recognize the NOOK Tablet’s Microphone, which means it’s impossible to make voice calls. You can only use Skype as an instant messenger app on the NOOK Tablet."
lvs1974 said:
Does Skype recognize an internal microphone?
I've heard there is a problem:
"I had no problem installing the Skype app or logging into my account. But the app wouldn’t recognize the NOOK Tablet’s Microphone, which means it’s impossible to make voice calls. You can only use Skype as an instant messenger app on the NOOK Tablet."
Click to expand...
Click to collapse
I've got the latest Skype running but it has issues. It can send IM's without issue but voice phonecalls are buggy. When making an outgoing call to someone on a contact list the call is established but then drops immediately, and then an incoming call from the person you rang suddenly appears even though they didn't call you. For a while I had it answer a call and apparently seem to maintain it but on the Nook I couldn't hear the remote party - Skype seemed to be confused with the nofification volume and the media volume. When the notification volume was all the way down it muted the incoming sound completely. When the notification volume was up, that's when I couldn't get it to maintain a call. Very weird. Not really usable.
That was my experience anyway, would be interested in seeing what other people find with various versions.
Can you check which version of skype you are using so I can try it. The latest doesn't seem to recognize the microphone.
failure on retesting
kgingeri said:
It seems to be working fine for me.
Have only done one voice call tho. Chat is fine. Not sure which apk - i just google for one and installed it. I dont have the full market installed yet - been ableto find apk's for apps I use.
Click to expand...
Click to collapse
OK, so I thought I'd try this again and its a no go?! I had tested it initially with my wife's computer and she answered the call etc. Now it also drops calls as soon as picked up. My version is a "raider" version for this forum somewhere and not the lastest but a link for ppl having issues. Non the less, it's not working now
Which apk?
The android market says it is incompatible. I got an apk on the net, but it insisted on a mobile phone number.
It looks good, signs in and calls out but drops the call after about two rings. Does Skype need gps? I was thinking that if we could get a gps spoof running that might do it.
I was calling a landline which I had control of and it even rang so I'm close. I can tether to the gps on my phone but that defeats the purpose. I suppose I could do that to see if it's what skype wants.
actual apk
jarome1 said:
The android market says it is incompatible. I got an apk on the net, but it insisted on a mobile phone number.
Click to expand...
Click to collapse
Wasn't sure I had it still - I have "com.skype.raider2-1.2.apk" in my downloads.
I've reinstalled it and it is acting the same as what i had installed.
Sorry I didn't keep more detail, but because it seemed to work, I didn't think much of it. I imagine now that I've done lots of other downloads, mods etc, something must of messed it up.
The most major one since then would have be the multi keyboard stuff. Either that or it was just a fluke that it worked. My wife is my participating witness tho
---------- Post added at 07:54 AM ---------- Previous post was at 07:25 AM ----------
OK, a little more digging reveals two files. The raider2 one mentioned above and one named "Skype_2.0.0.47_v06.apk".
I tried to attach them but they are both over 9megs and the limit is 8M.
Having a gps signal didn't help. My theory was that Skype needed a location so that it billed properly.
Currently calls drop after two rings (which make it to the line being called) and advanced settings cause a force close.
It's too bad. being able to make the occasional call would really make this an even better vacation device for out of your home country.
---------- Post added at 09:18 AM ---------- Previous post was at 08:23 AM ----------
A little bit of progress. The apk from this post rings the other number until connection then drops. Advanced settings still FC.
http://forum.xda-developers.com/showpost.php?p=18290748&postcount=1492
same here
kgingeri said:
OK, so I thought I'd try this again and its a no go?! I had tested it initially with my wife's computer and she answered the call etc. Now it also drops calls as soon as picked up. My version is a "raider" version for this forum somewhere and not the lastest but a link for ppl having issues. Non the less, it's not working now
Click to expand...
Click to collapse
I, also, tested Skype when I first installed it and it worked fine... ok, quality wasn't all that great, but it worked. Now it hangs up when the other end answers and will not recognize the mike. Very frustrating. I need to make this work.
rbr451 said:
I, also, tested Skype when I first installed it and it worked fine... ok, quality wasn't all that great, but it worked. Now it hangs up when the other end answers and will not recognize the mike. Very frustrating. I need to make this work.
Click to expand...
Click to collapse
Which version of skype did u use? My calls ring but they end up dropping
Sent from XDA premium using my Nook Tablet
lavero.burgos said:
Which version of skype did u use? My calls ring but they end up dropping
Sent from XDA premium using my Nook Tablet
Click to expand...
Click to collapse
If you are asking for the Skype version, it's 2.6.501.97. If you need the apk file number.... uh, I'm still pretty new to android and even tho I can build and hack a pc, I'm having trouble naving my NT. I'm still looking for the file and I'll post it when I stumble over it.
Okay, I give up. How do I sent a chat message to someone? I can't find anywhere in Skype that has that option. Whenever I click on a contact, I only have the option to call them.
Anyone have any updates on this?
I was wondering if they figured something out on the CM7 beta testing, but haven't found info related to skype/google calls.
---------- Post added at 02:03 AM ---------- Previous post was at 02:02 AM ----------
loribuono said:
Okay, I give up. How do I sent a chat message to someone? I can't find anywhere in Skype that has that option. Whenever I click on a contact, I only have the option to call them.
Click to expand...
Click to collapse
Haven't tried Skype on the tablet but have used Google Voice to make text messages to phones. Works fine, but can't make voice calls.
Is there a possible way to get Skype on an un-rooted Nook Tablet?
MagicElements said:
Is there a possible way to get Skype on an un-rooted Nook Tablet?
Click to expand...
Click to collapse
If you're on stock 1.4.0 you can sidelioad it by downloading it from official web page or Googling it.
~ Veronica
Sent from XDA premium using my Nook Tablet
lavero.burgos said:
If you're on stock 1.4.0 you can sidelioad it by downloading it from official web page or Googling it.
~ Veronica
Sent from XDA premium using my Nook Tablet
Click to expand...
Click to collapse
What about the ability to make calls? Any hopes for the newest release of CM7?
nook_lover said:
What about the ability to make calls? Any hopes for the newest release of CM7?
Click to expand...
Click to collapse
Nop voip calls are not supported yet. The speaker and microphone doesnt want to work together lol. But goncezilla said they will look into in a future because he is intereste on voip calls too, about stock unless someone post a hack for it its hopeless.
~ Veronica
This module makes android apps believe Wifi is connected.
Handy in situations where there's a (non wifi) connection, but some app won't do its thing unless it's on wifi. (android running in virtual machine / emulator, 3g but no wifi around, usb 3g modem connection, usb reverse tethering ...)
This means you can for instance access wifi-only features while on 3g.
If you're used to iOS, it's the android equivalent of 3g Unrestrictor or My3G.
Tested on Android KitKat 4.4.2, play store and many others working over ppp !
Lollipop
For android 5.0+ try v1.9 (thanks pyler)
Nougat
Looks like there are issues with nougat and later. Dev help welcome, if someone gets it working please share so others can benefit. Create a PR on github if you have a patch.
Installation
Just be safe, backup your ROM.
Install Xposed Framework:
Get installer from repo.xposed.info
Open Xposed Installer->Framework->Install
Reboot
Install FakeWifiConnection.apk
Open Xposed Installer->Modules, tick FakeWifiConnection
Reboot
How to use
No app is faked by default.
Open FakeWifiConnection app to enable/disable hack (master switch) and select which apps to fake. Changes take effect immediately (background apps need a reboot).
Try just faking the app you're interested in first.
If that doesn't work then try faking everything, save and reboot:
Some apps use other apps/services internally, which might need faking as well. For example many games use Google Play Services. Usually you can find out by looking at the logs (see debugging) see what tasks get activated while the app is running.
Contribute !
Have code to share ? Create a PR on github.
Click [Thanks] button
Project's working for you ? Have something cool to report ? Post your story !
Useful feedback about an app that's not working is valuable. It could well be that this app needs a tweak that's not there yet, and once it's added not only this app will work but also all the other apps that rely on the same mechanism. If you find your favorite app doesn't work report it if it's not mentioned already. Describe what happens, how/what doesn't work. Give details about your setup, especially if it's something unusual (android version ...), how to replicate the problem etc.
Make a donation
See also
Xposed module page and project page on github.
Kudos
rovo89 for awesome Xposed Framework !
UI code by hamzahrmalik.
Finally the app/module I've been searching for! ?
I did a quick test but unfortunately it doesn't work with the xfinity tv go app. It seems to make the app think it's corrupted and wants me to reinstall.
I think a whitelist would be a good addition to this module! ?
EDIT: False alarm..the xfinity app was actually corrupted. After reinstalling, this module faked it properly! Thanks!
Sent from my SM-N900T using Tapatalk
hamsup1o said:
Finally the app/module I've been searching for! ?
I did a quick test but unfortunately it doesn't work with the xfinity tv go app. It seems to make the app think it's corrupted and wants me to reinstall.
I think a whitelist would be a good addition to this module! ?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
If you know how to modify apks, you can decompile it and make the network connectivity check always return true. It's what I did and it works fine (and no, I will not share the apk for obvious reasons).
I tried it on the Triiing! app (free calling over Wi-Fi for Telenet ISP customers), but it still detects that it isn't connected to Wi-Fi.
I've been searching for months for this app, if only it'd work, but I have faith in the developers around here.
Sent from Tapatalk on my GT-I8190 running Novafusion's Carbon 4.4.4
Changelog
v1.1
fake getNetworkInfo(TYPE_WIFI) calls as well
Finally the app/module I've been searching for!
I think a whitelist would be a good addition to this module!
Click to expand...
Click to collapse
Glad it works :laugh:
For the whitelist, do you mean a way to select which apps are faked ?
GXGOW said:
I tried it on the Triiing! app (free calling over Wi-Fi for Telenet ISP customers), but it still detects that it isn't connected to Wi-Fi.
Click to expand...
Click to collapse
GXGOW, try v1.1 that should help.
lemonsqueeze said:
Glad it works :laugh:
For the whitelist, do you mean a way to select which apps are faked ?
Try v1.1 that should help.
Click to expand...
Click to collapse
that's exactly what i meant. this should eliminate having to reboot everytime you want to enable/disable the mod, which can be a pain. there are also apps out there that would use higher quality streams on wifi vs. mobile data and not having a whitelist would certainly use more data if someone is on a limited data plan. hopefully you will consider this. thanks again!
Sent from my SM-N900T using Tapatalk
My friend's been wanting this
Thanks, will tell him
lemonsqueeze said:
Glad it works :laugh:
GXGOW, try v1.1 that should help.
Click to expand...
Click to collapse
Yup, working now over here. Great module, I've been waiting for months for this!
Sent from Tapatalk on my GT-I8190 running Novafusion's Carbon 4.4.4
Installing this module causes this module (http://repo.xposed.info/module/tw.fatminmin.xposed.networkspeedindicator) to break.
Oooo, I asked for something like this a month or so ago. Some apps need a wi-fi or mobile data connection, and don't work with Bluetooth via PdaNet+. Facebook Messenger (although Facebook works), Words with Friends don't work, and Gameloft games (and others, probably) that need that "additional file" to download don't work with BT/PdaNet, so these apps with my wi-fi tablet aren't available to me sometimes.
I'll give this a try and let you know how it works for me.
Alright, v1.3 is out with user interface to select apps :
Every app is faked by default. Open app to enable/disable hack and select which apps to fake. Changes take effect immediately (background apps might need a reboot).
lemonsqueeze said:
Alright, v1.3 is out with user interface to select apps :
Every app is faked by default. Open app to enable/disable hack and select which apps to fake. Changes take effect immediately (background apps might need a reboot).
Click to expand...
Click to collapse
Nice! Working well! Just one suggestion...maybe add a loading bar when the UI opens? I thought the app was frozen when it was loading my list of apps. No biggie though.
I think someone already mentioned this but it is not playing well with another xposed module Network Speed Indicator. The network speed indicator is no longer showing on the status bar when your module is enabled.
Thanks again!!
EDIT: Ok some more info on the 2nd part of my post...i disabled another module (Tinted Status Bar) and the network speed indicator is back. So I'm not sure what's breaking what lol.
Sent from my SM-N900T using Tapatalk
It works fine on Samsung S4 4.3, thanks.
The only thing I noticed that does not work well is that when the wifi is completely turned off, some apps can see that the wifi is turned off and do not go forward. I solved the problem by leaving the wifi on and not connected (obviously) but this trick consumes more battery. Can you fix this?
Thank you and congratulations for the very useful app.
crash44
lemonsqueeze said:
This module makes android apps believe Wifi is connected.
Handy in situations where there's a (non wifi) connection, but some app won't do its thing unless it's on wifi. (android running in virtual machine / emulator, 3g but no wifi around, usb 3g modem connection, usb reverse tethering ...)
Tested on Android KitKat 4.4.2, play store working over ppp !
Added user interface:
Every app is faked by default. Open FakeWifiConnection app to enable/disable hack temporarily (master switch) or select which apps to fake. Changes take effect immediately (background apps might need a reboot).
I didn't have any luck with HackConnectivity.apk and couldn't find a better way, so ended up writing this. (maybe HackConnectivity works with older android version ?).
Feedback Welcome !
I can only test on my setup, if you find some other app/android version works/doesn't work feel free to post.
Installation
Just be safe, backup your ROM.
Install Xposed Framework:
Get installer from repo.xposed.info
Open Xposed Installer->Framework->Install
Reboot
Install FakeWifiConnection.apk (repo.xposed.info/module/com.lemonsqueeze.fakewificonnection)
Open Xposed Installer->Modules, tick FakeWifiConnection
Reboot
From now on connectivity is forced to wifi. Open app to change settings.
Source code: github.com/lemonsqueeze/FakeWifiConnection
Debugging: see README
Kudos to rovo89 for awesome Xposed Framework !
UI code by hamzahrmalik, thanks !
Click to expand...
Click to collapse
Its such a very Great App !
Great idea, unfortunately it's not working for me. Maybe it only works on KitKat (I'm using JB 4.3)? Or maybe it's the app I'm trying to fake (UPC Horizon Phone) but it just keeps telling me I'm not connected to a WiFi network - even with WiFi switched on as someone suggested.
Great app though and good to see it's working for others.
Kind of works
I have been using the Network Spoofer app which has no trouble with the Play store, but has no way to automatically start in WiFi mode that I am aware of.
This app does exactly what I need it to do but it does have an issue with the Play store. Access to the store works, however when downloading it always says "waiting for network".
Very good module, let me ask, could be added an option to be in some specific wifi apps understood as if in 3g? I ask this because I use a wifi modem to share internet and wifi that wanted to follow the rules to put 3g, I think it would be a great addition to this module or to create another based on this
Thanks
Enviado de meu XT1058 usando Tapatalk
Ive been waiting for well over 2 years for something like this
I was getting pretty close to doing some research on the finer points about how androids wifi works on the lowest layers, and trying to make my own app or now a module that would help me do what I want to make happen, I havent started that yet...
I have a few questions after playing around with the module.
Firstly, what i want to make happen on my droid is being able to use the hotspot connection full time (its the only ISP ive had for about 2 years now, and having that active, any method or driver that works idc, is absolutely necessary. Now, I want to use aps like Allcastto stream to my 360, or chromecast streaming from my phone, also apps like, or... or another decent one is Signal Tracker
these all refuse to even start up if wifi tether is on and wifi is off. Now i was able to use
WiFi Tether Router to work exactly like ive been trying to explain, it worked for about 2 days and now i cant figure out what I did to break that. I set the router settings to use HostApd as the main method. Id first make sure wifi itself was active ad not connected to anything, then i would enable wifitetherrouter, and the android wifi connection wold be uneffected and stay on working fine. While this is going the routher app works as descripbed... being a hotspot wth this app is no different from the built in wifiap.
my question is, does this xposed module do anything like this, or am i way off and still going to be searching for how to do thihs? I played around with it trying to use allcast and couldnt get it to do anything..
how hard would it be exactly to trick android into thinking the devices connected to your phone while its a hotspot are also able to be connected to over the regular wifi methods.. I know its possible because like i mentioned, i saw this happening using wifitetherrouther with my own eyes.. I had my laptop and xbox both on my phones hotspot, and actually both were downloading something as well.. then I startedallcast and TADA instead of complaining theres no wifi connection, it found my 360 onthe network in about half a second.. i was able to stream video in high def to my tv
no problem.
Just have a quick question - anybody using this module has seen any increase in battery life? Basic premise being that apps would think Wi-Fi is connected so would not wake up the phone radio directly
Gear Manager for Gear Fit2: (iTunes)_GearManager1616092201_Volt_Phase4.ipa
Replace "<DOT>" by "." in that string:
drive<DOT>google<DOT>com/uc?export=download&id=0BzV6ODdvTyPtZmFjWlhjRURZMm8
=> Works with Gear Fit2 and iPhone 7 Plus!
Yes!
Yes! Yes! Yes! I have been waiting for this for at least 3 months.
Great!, thanks for posting.
Installed it on my fit 2 and iPhone 7.
Reset, not full reset though, gear manager discovers the fit 2
What is working, what is not in my config;
Watch faces: only free, but gear designer does upload own designed faces
Sync with Samsung health: working
Notifications;
Text: working
phone: not
Whatsapp : working (default icon)
iOS mail: not
iOS calendar: not
Installed gmail and gmail calendar to try;
Gmail: working
Gmail calendar: working
This covers most of my need, tried several other 3rd party apps with notifications, most do work.
You have to let the gear manager app run, it restores connection to the fit if you are back in range but overnight I lost the connection and had to close and restart the gear manager.
Overal, very grateful , seems that we can expect to fully use the fit2 on iOS
Cheers
Summed up on reddit
Here is the link to my Reddit post:
/r/gearfit/comments/5hfylh/gearfit2_ios_beta_leaked/
iCal and iOS mail notifications worked for me. Almost all app's notifications worked except for Google Maps somehow.
Manage tracks?
Hey guys, I tried to add music tracks with the Manage Tracks - Browser option but it crashes ever time? Did anyone experience the same issue?
Hello,
i've installed the IPA and connected the Fit 2, but i cannot load any watch faces on too my Fit 2.
Have you tryed it ? If yes and it worked for you...could you please give me an example which works ?
Do i need to set something in the app....or ?
Thanks !
Edit: ok ok i found out, after installing the watch face from the phone, you have to enable it on the watch -> settings -> display-> watch faces
---------- Post added at 02:35 PM ---------- Previous post was at 01:48 PM ----------
Ok, i have another question: how do I transfer music on to the watch from the phone using this app ?
Thanks !
Just went for my first run with the gear fit 2 today, came back and synced with the gear manager app, only managed to see the steps count being synced but no running activity was seen in s-health via the app, anyone facing a similar bug? Or is your running being recorded on the iOS app?
Thanks in advance
You can't
flopyro said:
[/COLOR]Ok, i have another question: how do I transfer music on to the watch from the phone using this app ?
Thanks !
Click to expand...
Click to collapse
Hey, you can't add music through the app yet. Not on iOS. But you should be able to do it by connecting your computer to the same wifi and transferring it through your browser. To do that, go to music player on your Gear Fit2, switch to Play From Gear Fit2 mode (tap the phone icon if you're not in that mode), slide up from bottom and select Manage Tracks. Then follow the instructions. It looks very easy. However, it does not work for me. It keeps crashing somehow.
sirmart1n said:
Hey, you can't add music through the app yet. Not on iOS. But you should be able to do it by connecting your computer to the same wifi and transferring it through your browser. To do that, go to music player on your Gear Fit2, switch to Play From Gear Fit2 mode (tap the phone icon if you're not in that mode), slide up from bottom and select Manage Tracks. Then follow the instructions. It looks very easy. However, it does not work for me. It keeps crashing somehow.
Click to expand...
Click to collapse
i am also facing the same crashing issue.
---------- Post added at 03:22 AM ---------- Previous post was at 03:21 AM ----------
Stanlehh said:
Just went for my first run with the gear fit 2 today, came back and synced with the gear manager app, only managed to see the steps count being synced but no running activity was seen in s-health via the app, anyone facing a similar bug? Or is your running being recorded on the iOS app?
Thanks in advance
Click to expand...
Click to collapse
yes only the steps synchronize . no map tracking on shealth app .
..
Official app is out
Just downloaded it last night, and it seems like a striped down version of the Android Version...S Health is missing a lot of options. Why did they even bother...
Thank you for replying, sorry for my late answer:
I have done the steps, and it keeps crashing for me to...
Does anyone succeded to sync music like this ?
Thanks !
sirmart1n said:
Hey, you can't add music through the app yet. Not on iOS. But you should be able to do it by connecting your computer to the same wifi and transferring it through your browser. To do that, go to music player on your Gear Fit2, switch to Play From Gear Fit2 mode (tap the phone icon if you're not in that mode), slide up from bottom and select Manage Tracks. Then follow the instructions. It looks very easy. However, it does not work for me. It keeps crashing somehow.
Click to expand...
Click to collapse
flopyro said:
Thank you for replying, sorry for my late answer:
I have done the steps, and it keeps crashing for me to...
Does anyone succeded to sync music like this ?
Thanks !
Click to expand...
Click to collapse
Just found out there is an update for Music Player app on Samsung Store. I will let you know if it is fixed once it's downloaded
update: Nah, still crashes
I have the same problem. It won't crush when WiFi is off, but when I turn it on it still crashes... Waiting for next update, the same problem on S2 after an update, before it was working fine.
Does anyone know if there's a way to make the Schedule/Agenda work?
sirmart1n said:
Just found out there is an update for Music Player app on Samsung Store. I will let you know if it is fixed once it's downloaded
update: Nah, still crashes
Click to expand...
Click to collapse
flopyro said:
Thank you for replying, sorry for my late answer:
I have done the steps, and it keeps crashing for me to...
Does anyone succeded to sync music like this ?
Thanks !
Click to expand...
Click to collapse
now after the latest update it works.
kanwal.diku said:
now after the latest update it works.
Click to expand...
Click to collapse
it works for you ?
what SW Version do you have ?
i have: R360XXU1BPK6 and it crashes ... and there is no update available.
flopyro said:
it works for you ?
what SW Version do you have ?
i have: R360XXU1BPK6 and it crashes ... and there is no update available.
Click to expand...
Click to collapse
It's the Music Player app update. Not firmware update.
sirmart1n said:
It's the Music Player app update. Not firmware update.
Click to expand...
Click to collapse
Noob alarm: you can update only the music player on the Gear Fit 2?
How do you do that ?
Thanks !
Hi!
I just got a new update and by casuality I was proxy my app to my computer at that time, so I catch the rquest, here is the changelog:
1.3.5 Release notes:
Support Mountaineering activity tracking
Removed occasional Chinese voice prompt from lap alert
Fixed small difference on displayed time when the screen is locked v.s. unlocked
Fixed the weekday rendering issue on some watchfaces
Fixed off-by-one-hour issue in tracked sleep time in Daily Overview widget
Fixed pairing issues with some smartphones running Android 8.0 and above
Optimized system power consumption
The update hide the sideload apk list at the end of the options, but don't worry, after re/install any apk, all of them are back.
* I have also downloaded and attached the file.
Here is the a rom dump thanks to @Saratoga79
system.img
boot.img
recovery.img
Edit 2:
Stock 1.3.5 Firmware installer with fixed OTA update
I got it also
Изпратено от моят SM-G930F с помощта на Tapatalk
Hi
I'm already installed on my watch and I noticed the system is much smoother than before ?
I've updated but can't find the new Mountaineering activity. Can anyone else see it?
aembleton said:
I've updated but can't find the new Mountaineering activity. Can anyone else see it?
Click to expand...
Click to collapse
I have a climb mode, not sure if it is new xD
I just discovered that all my sideload installed app are not there anymore, not sure if are unninstalled or just the menu is hidden :S
Hi,
I just bought this watch and love it, upgraded this morning to 1.3.5. Looking at the change log it says:
Removed occasional Chinese voice prompt from lap alert
Does this watch support and audio prompt in the lap alert? For me it just vibrates and shows on screen my pace for the previous kilometer.
If you have the BT headset connected, yes.
fzelle said:
If you have the BT headset connected, yes.
Click to expand...
Click to collapse
Thanks for the reply, how can I get this to work? I run without my phone and have a Bluetooth headset connected playing music, I also have the lap alert enabled in the settings! This is the one thing I'm missing in this watch so it would be great if I could get it working!!
aembleton said:
I've updated but can't find the new Mountaineering activity. Can anyone else see it?
Click to expand...
Click to collapse
As mentioned, climb more and also trail run.
Sent from my SM-G955F using Tapatalk
jesuslg123 said:
Hi!
I just got a new update and by casuality I was proxy my app to my computer at that time, so I catch the rquest, here is the changelog:
1.3.5 Release notes:
Support Mountaineering activity tracking
Removed occasional Chinese voice prompt from lap alert
Fixed small difference on displayed time when the screen is locked v.s. unlocked
Fixed the weekday rendering issue on some watchfaces
Fixed off-by-one-hour issue in tracked sleep time in Daily Overview widget
Fixed pairing issues with some smartphones running Android 8.0 and above
Optimized system power consumption
* I have also downloaded the file to my computer.
Click to expand...
Click to collapse
Please, Could you upload it and give us the link?
Thanks
Yes, I will do at home. Just want to confirm also there is not reference to my device or account on the file. Any idea about that?
jesuslg123 said:
Yes, I will do at home. Just one to confirm also there is not reference to my device or account on the file. Any idea about that?
Click to expand...
Click to collapse
Thanks
I am sure that there is not any references to your device or account on the file
alucard_24 said:
Thanks
I am sure that there is not any references to your device or account on the file
Click to expand...
Click to collapse
I have attached it to the first post What are you planning to do with it?
jesuslg123 said:
I have attached it to the first post What are you planning to do with it?
Click to expand...
Click to collapse
Unfortunately I can't do anything because the attached file is an OTA update and it is not completed.....
Anyway thanks for sharing the file.
Strange bug on amazfit
Hello, ive found something strange on my watch. We all know the option huami lab called 'ppg capturing'. Seems when you reboot the watch, this option is auto activated: i've seen many times my watch tracking my heartbeat while i was on my bed since the night. I've checked huami lab ppg capturing and resellected the cross and it is fine then.
arf_stoned said:
Hello, ive found something strange on my watch. We all know the option huami lab called 'ppg capturing'. Seems when you reboot the watch, this option is auto activated: i've seen many times my watch tracking my heartbeat while i was on my bed since the night. I've checked huami lab ppg capturing and resellected the cross and it is fine then.
Click to expand...
Click to collapse
Thanks for that, this can be useful since I noticed that battery autonomy was dicreased by this update. I'm sure this will improve it.
I'll wait for a few days, as usual, but if someone could check the couple of glitches I've had on 1.3.4f :
1. When changing the watchface on watch , by press&hold, it always scrolls to 1st one, so I have to swipe eternally to left to get to one wanted.
2. Sleep tracking was laughable from day one for me, it shows 4-5 hours of sleep per day, every day.
3. Some watchfaces were stopping the watch and touchscreen from working, when you choose custom background (on the watch itself)
Could someone check those, please?
Sent from my LG-G3 using Tapatalk
babaroga73 said:
I'll wait for a few days, as usual, but if someone could check the couple of glitches I've had on 1.3.4f :
1. When changing the watchface on watch , by press&hold, it always scrolls to 1st one, so I have to swipe eternally to left to get to one wanted.
2. Sleep tracking was laughable from day one for me, it shows 4-5 hours of sleep per day, every day.
3. Some watchfaces were stopping the watch and touchscreen from working, when you choose custom background (on the watch itself)
Could someone check those, please?
Sent from my LG-G3 using Tapatalk
Click to expand...
Click to collapse
No such behavior for me but I also didn't have it in the past as well...
Sent from my SM-G955F using Tapatalk
I switched of the 'ppg capturing' from Huami lab, but the autonomy is still worser than in the previous firmware...