[Q] GS3 not recongnised in UL Modus from PC - Galaxy S III Q&A, Help & Troubleshooting

I am using Android 4.3 (Buildnumber: JSS15J:I9300XXUGML29) and wanted to root it.
If I connect the phone via USB to the PC in normal modus it will be found an recognised (with and without USB debugging switched on) by the PC and the port connected to will be shown by Odin.
As soon as I go into upload mode it will not be seen by the PC (again with and without USB debugging switched on) and Odin does not show anything.
Thanks for any help in advance.
MTJ

Mind The Joker said:
I am using Android 4.3 (Buildnumber: JSS15J:I9300XXUGML29) and wanted to root it.
If I connect the phone via USB to the PC in normal modus it will be found an recognised (with and without USB debugging switched on) by the PC and the port connected to will be shown by Odin.
As soon as I go into upload mode it will not be seen by the PC (again with and without USB debugging switched on) and Odin does not show anything.
Thanks for any help in advance.
MTJ
Click to expand...
Click to collapse
- Remove installed drivers (control panel-> devices and printers)
- Reinstall Samsung drivers (or Kies3)
- Replace cable and USB port
Sent from my GT-I9300 using Tapatalk

Related

[Q] odin problem

Hi to everyone. I can't root my sgsII because odin won't recognize it in download mode. I have kies, drivers, debugging on and all what is needed. When phone is turned on odin recognizes it. Can anybody help?
Did you shutdown kies while trying to flash?
Turn debugging off turn phone off open Odin with Kies closed .select file
turn phone on in download mode read screen connect usb cable flash .
jje
brdozgd said:
Hi to everyone. I can't root my sgsII because odin won't recognize it in download mode. I have kies, drivers, debugging on and all what is needed. When phone is turned on odin recognizes it. Can anybody help?
Click to expand...
Click to collapse
Close Kies from the system tray.
It is closed but again same problem
Are you using a HTC or Nokia usb cable?
1. use the original cable
2. kill all kies* pocesses in task manager
3. kill/shutdown all other htc/nokia/whatsoever software if present on your PC
4. try different USB plug (my friend had such problem with odin)
5. try different PC ;-)
should work...

Vibrant not conecting to PC :/

Hi i bough a vibrant SGH-T959
I am triying to root it but it wont conect to my pc
the guy i bought it from told me the phone was rooted before but he restord it before he sold it to me. eany ways i have try all the USB ports in my pc
and have try 2 diferent pc too, tried diferent cablesn and i have install the drivers in all of the other computers. i put it on debuging mode and the computer simply doesent recognise it. i tryUSBDeview and i dont see samsung drivers eanywhere but i know i have them install in fact i have re enstalled them and nothing
the phone charges but dosesent get detected by the computer
eany help will be apreciated thanks
Download Samsung kies. It will install Samsung drivers for you.
Link: http://www.samsung.com/us/kies/
Sent from my SGH-T959 (Samsung Vibrant)
I have tried that and nothing :/
Try turning USB debugging off and try again...
By the way, you're on stock 2.1 correct?
Sent from my SGH-T959 (Samsung Vibrant)
i have try that and nothing
i have try easytether driver
the msi program and all sort of things
and im in 2.2
So USB debugging won't work. Kies/Sammy drivers won't work. I have a radical idea. Maybe your computer won't recognize the drive as a Mass Storage device b/c the drive letter got deleted somehow. This has happened to me on a few phones when flashing-fantastic.
Try this and see. It is for XP but I suspect there are similar solutions if you are on W7.
ill chek it out but i have try my phone in 3 direrent computers and nothing :/
the strange thing is when i plug it in to the PC it only charges
but when i plug it in to de AC adater it goes into debuging mode 0.o
Now i turned debuging off and turned mass storage on
and when i plug it to charge it says USB connected phone conected to computer 0.o
Try these steps:
1. Disconnect your phone from your PC
2. Setting
3. Wireless & Network
4. USB
5. Click the last option (don't remember)
6. Reconnect your phone again
Good luck
orphan22 said:
Now i turned debuging off and turned mass storage on
and when i plug it to charge it says USB connected phone conected to computer 0.o
Click to expand...
Click to collapse

pc not recognising phone

Hi,
I think the usb port on my sgs2 is f***** It will send a charge to the phone, but will not recognise it.
I get error on my vista laptop as :
USB DEVICE NOT RECOGNIZED - One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have tried reinstalling usb drivers on kies and put in debugging mode etc. I had a problem with the phone not charging around christmas time, so I cleaned the usb port with a cocktail stick, that got the charge working, but it has not picked up usb mode since. So I cant connect usb storage or to ODIN, let alone KIES.
Does anyone have any advice/suggestions as to what I could try, I really dont want to send it back for repair and be handset less for a month!
daz_2000 said:
Hi,
I think the usb port on my sgs2 is f***** It will send a charge to the phone, but will not recognise it.
I get error on my vista laptop as :
USB DEVICE NOT RECOGNIZED - One of the usb devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have tried reinstalling usb drivers on kies and put in debugging mode etc. I had a problem with the phone not charging around christmas time, so I cleaned the usb port with a cocktail stick, that got the charge working, but it has not picked up usb mode since. So I cant connect usb storage or to ODIN, let alone KIES.
Does anyone have any advice/suggestions as to what I could try, I really dont want to send it back for repair and be handset less for a month!
Click to expand...
Click to collapse
I am Sure no problem with your mobile. May be problem with computer Hardware or Drivers.
can you try different USB port or you can different computer also.
If you dnt have another PC , uninstall all samsung drivers & kies and reboot the PC.
Just connect as USB storage . USB storage not require any special drivers.
Also use the original usb cable. I have two different cables and only original one works.
Sent from my GT-I9100 using XDA App
I have the same issue, if your not rooted just Send it for repair under warranty but if you are you'll have to flash a stock kernel to remove root first and use a jig to reset your flash counter
Sent from my GT-I9100 using xda premium
Had the same problem, http://forum.xda-developers.com/showthread.php?t=1425128my cable was the culprit.
Mobile Odin for flashing and Remote Web Desktop/Root explorer for SD access will tide you over.
Sent from my GT-I9100 using xda premium
Make sure:
The selection of AP/BP connection behavior
when connecting your phone (as a client), with a USB cable
to a PC host, is manually set in the PhoneUtil (PU) Menu.
This sets the behavior of your phone when connecting it
to a PC. You can select wether you like it to act as a
Modem or PDA, o via USB or UART port. The PU does not
seem available from the ServiceMode menu.
Dial: *#7284#
Code:
UART:
[o] MODEM*
[ ] PDA
USB:
[ ] MODEM
[o] PDA*
* is default SGS2 setting.

[Q] PC not able to detect the phone via USB

Phones not getting detected using USB
Tried with and without USB debugging
also installed PC suite to no avail
jamieloboxperiazl said:
Phones not getting detected using USB
Tried with and without USB debugging
also installed PC suite to no avail
Click to expand...
Click to collapse
Check the follows
Is Cable Connected tight?
Using right cable?(some cable is only made for charging)
Try reinstall Xperia Z2 driver from PC
Change USB port(It might be some problem with your PC)
Disconnect everything other than XperiaZ2 and try(sometimes PC can only handle few devices at the same time)
Are you using Extension cable or USB HUB? (It might not work)

Galaxy S3 SHV-E210K can't use USB connection

I just bought an old Galaxy S3 SHV-E210K android 4.4.4. Everything work fine, but I can't connect to my computer through USB port. When I plug in USB port, my phone only charge, have none notifications about USB connection ( same as my PC).
So i tried:
- Hard reset my phone
- Change my cable, USB port, computer ...
- Install, reinstall kies with drivers
- USB debug mode on, off
- Try to use *#7284# and *#0808# but nothing happend. ( for more information I can't use *2767*3855# too)
- Try to root with kingroot, ROMmanager, ... but can't. It seem like my phone block all these apps
- Try to find OEM unlocking but there's no option in developer options
Please help, i read all articles but nothing solve my problems I'm so hopeless
Have you connected the phone to the motherboard usb port and then installed kies then stopped the kies processes?. You can also uninstall the kies program while keeping the drivers.
shivadow said:
Have you connected the phone to the motherboard usb port and then installed kies then stopped the kies processes?. You can also uninstall the kies program while keeping the drivers.
Click to expand...
Click to collapse
No i havent. After i had installed kies with driver, i pluged in usb port. Nothing happened
Have the phone already connected so it can find it correctly..
If it still isn't detected by the computer, the USB port could be damaged.
audit13 said:
If it still isn't detected by the computer, the USB port could be damaged.
Click to expand...
Click to collapse
I changed computer too. Any ideas ?
Try connecting the phone while it's in download mode.

Categories

Resources