Good morning, Problem: black screen, cell does not unlock and screen does not light. Only led illuminates
Bom dia, alguém conhece esse problema? se tem solução
Good morning, someone knows this problem? has solution
Buen días, alguien sabe deste problema? tiene solución
Vídeo -> youtube.com/watch?v=WmlbFQ9jQkQ
Post lacks any useful information .
firmware download or recovery mode yes no .
Please delete your identical post .
Related
Good morning, Problem: black screen, cell does not unlock and screen does not light. Only led illuminates
Bom dia, alguém conhece esse problema? se tem solução
Good morning, someone knows this problem? has solution
Buen días, alguien sabe deste problema? tiene solución
Vídeo -> youtube.com/watch?v=WmlbFQ9jQkQ
Hello , I have problem retrieving my m4 aqua .
It all started when I went to take some pictures under water . Then after a while he hung
then when I got home I was trying to get it back by FlashTool and the Xperia Companion . But the cell is about 30 seconds in flash mode and then leaves alone.
It's happened to me before then recovered by FlashTool , but now I have this problem .
Sorry my bad englsh.
Olá, estou com problema ao recuperar o meu m4 aqua.
Tudo começou quando fui tirar umas fotos em baixo d'água. Então depois de um certo tempo ele desligou
logo quando cheguei em casa fui tentar recupera-lo pelo Flashtool e pelo Xperia Companion. Porém o celular fica uns 30 segundos no modo flash e depois sai sozinho.
Já aconteceu antes comigo aí recuperei pelo Flashtool, porém agora estou com esse problema.
It might be related to water damage so no software can fix that. What exactly happens with the phone when you use it?
Esto podría ser daño de agua. ¿Qué ocurre con el tele cuando lo usas?
Open the back cover and remove the battery. First you need to remove connectors
I have tanix tx9 s905w, I recently tried to install atvxperience firmware using usb burning tool v2.1.6, NO SUCSSES.
I have the same problem, and I haven't found the solution anywhere. Board RED CS_905W_TX_V1.2
hello, I need the ROM of this Box, if anyone can make it available, but the version of my card is: CS_905W_TX_V1.2
This is the board.
<img src="https://i.ibb.co/WPHCPzg/72467323-2534550966620453-4536635652522901504-o.jpg" alt="72467323-2534550966620453-4536635652522901504-o" border="0">
mesmo problema que eu tenho
rapht1 said:
I have tanix tx9 s905w, I recently tried to install atvxperience firmware using usb burning tool v2.1.6, NO SUCSSES.
I have the same problem, and I haven't found the solution anywhere. Board RED CS_905W_TX_V1.2
hello, I need the ROM of this Box, if anyone can make it available, but the version of my card is: CS_905W_TX_V1.2
This is the board.
<img src="https://i.ibb.co/WPHCPzg/72467323-2534550966620453-4536635652522901504-o.jpg" alt="72467323-2534550966620453-4536635652522901504-o" border="0">
Click to expand...
Click to collapse
Estou buscando mas sem sucesso
the firmware
paulosdjr said:
Estou buscando mas sem sucesso
Click to expand...
Click to collapse
hi this is the firmware
This firmware is for both red and blue cards, but for red cards it may not be re-registered.
send me email because xda
don't post external links yet
[email protected]
joelunatic said:
hi this is the firmware
This firmware is for both red and blue cards, but for red cards it may not be re-registered.
send me email because xda
don't post external links yet
[email protected]
Click to expand...
Click to collapse
paulosdjr said:
Estou buscando mas sem sucesso
Click to expand...
Click to collapse
[US-EN]
Hey Guys,
After a huge research i found a Yandex drive with several ROM's for TX9 (its the same hardware from TX3 mini with a TX9 box).
LInk https://yadi.sk/d/jMPL4mEbCF9h8g
PM me if you need any help.
[PT-BR]
Pessoal,
Fiz uma mega pesquisa e achei um drive com varias ROM's para o TX9 (que na real é o TX3 mini)
Link https://yadi.sk/d/jMPL4mEbCF9h8g
Manda mensagem caso precisem de ajuda.
joelunatic said:
hi this is the firmware
This firmware is for both red and blue cards, but for red cards it may not be re-registered.
send me email because xda
don't post external links yet
[email protected]
Click to expand...
Click to collapse
EN
You email is incorrect.
PT-br
Seu email está incorreto. Por favor, entre em contato [email protected]
TX3 MINI(Fake) Brick
I also have same red board CS_905w_tx_v1.2 (TX3 MINI) but I think it is also fake one because on the box its written Cherry V2 Pro, I tried installing atvXperience through SDCard after completion of updating bar blue screen appears boot written on display of device I waited for some time and then remove the power cable after that is does not give any display only blue screen and red light on back of the device, I tries Amlogic USB Burning tool but after connecting and push start button it stops on 1% and give error, after that I tried many roms including TX mini one but no luck , Please suggest me solution to solve this problem. I am attaching pictures of device and current status.
hi dear frieds. any one found this firmware rom....????
POis é essa porcaria de placa é importada por uns caras no centro de SP e aparece na caixa iJack e os caras não tem um pingo de vontade de compartilhar o arquivo, então ficamos nesse empasse, um absurdo. Plaquinha com memoria samsung e emmc Samsung até aí ótimo, mas uma montagem meio porca, o P2 soldado torto... esse android mal feito. O Android da tanix esqueçam. Se funcionasse seria uma benção .
paulosdjr said:
Estou buscando mas sem sucesso
Click to expand...
Click to collapse
Oi bom dia conterrâneo alguma novidade por um acaso o android que você comentou é da placa vermelha?
herr_marechal said:
Oi bom dia conterrâneo alguma novidade por um acaso o android que você comentou é da placa vermelha?
Click to expand...
Click to collapse
to com mesmo problema .. o meu é da placa vermelha .. so fica a luz atras .. cheguei a instalar a rom so que agora nao reconhece na usb nem nada.. queria uma forma de dar reset forçado na placa
Did Someone Solved this problem ? i have same problem, when i try flashing it's always stuck on 1% and it's say Cannot FInd DDR_ENC.USB, how to fix it ??
joelunatic said:
[email protected]
Click to expand...
Click to collapse
your email seems to be wrong
Did anyone found it yet?
Hey all
Today in the morning watch showed 9% on battery and I placed it to charge and after an 1 hour I came back to check and it was showing Amazfit logo, the one when you boot the device but logo stays forever. If I hold red button to reset it reloads and starts by itself. Also there is no way to turn it off.
Everything was working fine in the morning before the charge and all other days.
Maybe someone has experienced same stuff. Watch is only 1 month old...
Mioleris said:
Hey all
Today in the morning watch showed 9% on battery and I placed it to charge and after an 1 hour I came back to check and it was showing Amazfit logo, the one when you boot the device but logo stays forever. If I hold red button to reset it reloads and starts by itself. Also there is no way to turn it off.
Everything was working fine in the morning before the charge and all other days.
Maybe someone has experienced same stuff. Watch is only 1 month old...
Click to expand...
Click to collapse
The same situation here. I have tried everything without success. I am thinking that next version of zeep maybe automatically fix the issue.
Mam to samo. W nocy obudził bootloop. Nic nie pomaga.
Same problem here pethatic amazfit support money wasted
Any help for gtr2 bootloop restarting problem any hope help please
How to go in Fastboot mode gtr2 any guy answer please
Hey, I have a GTR 2, and at first I thought that the bootloop issue is software based. That can be easily fixed if you put the watch on the charger as it can finish loading even with a corrupted watchface installed.
In my case however, the watch only worked for a short time after I've put it in the freezer. That is a hardware issue. All that can be done is to get it replaced by the store that sold it to you, or in case that option is not available to you, you need to actually heat the board over 300C so that, hopefully, the bad connection is fixed (mobile repair shops can actually help with that).
As a test: put device in freezer, connect, reset, whatever, then shutdown the watch.
Wait for the watch to reach room temperature (non working state). If it's a hardware bootloop, the watch will not react to any buttons, will not show he charging animation, nothing. Basically black screen.
I also tried removing the battery for 10 seconds, holding any combination of buttons, charging states, screen presses, so simply don't waste time with that.
Every electronic equipment has a failure rate of 0-5%, we just happened to buy those 0 to 5% watches.
From what I understand, it is a design error and some contacts on the circuit board may not make contact...
The Amazfit GTR2 just doesn't work on the touch screen. I only used it for a week .... I restarted in vain, nothing.
Can anyone help me?
Good morning everyone
I wanted to share an experience with you. And the solution in the Amazfit GTR2 that was stuck in the logo
after I read the method of placing it in the freezer for a few minutes and that it really works for a few minutes
thing that and verified!
I came to deduce that it would be ??!!
It could be a violation of 183
well I proceeded to do a reflux since it still turns on I proceeded to use
125 degree heat
60 air
in a uniform way after saying the heat
turned on without problems
I hope it helps you
Buenas.. A todos
les quería compartir una experiencia. Y la solucion en la Amazfit GTR2 que quedaba pegada en el logo
despues que lei el metodo de colocarlo en el freezer por algunos minutos y que en verdad funciona por algunos minutos
cosa que e comprobado!!!
llegue a deducir que seria ??!!
Podría tratarse de una infracción de 183
bueno procegui en hacerle un reflujo ya que el mismo ahun prende procedi a usar
125 grados de calor
60 de aire
de una forma uniforme luego de decir el calor
encendió sin problemas
Espero les ayude
Ronaldvd said:
Good morning everyone
I wanted to share an experience with you. And the solution in the Amazfit GTR2 that was stuck in the logo
after I read the method of placing it in the freezer for a few minutes and that it really works for a few minutes
thing that and verified!
I came to deduce that it would be ??!!
It could be a violation of 183
well I proceeded to do a reflux since it still turns on I proceeded to use
125 degree heat
60 air
in a uniform way after saying the heat
turned on without problems
I hope it helps you
Buenas.. A todos
les quería compartir una experiencia. Y la solucion en la Amazfit GTR2 que quedaba pegada en el logo
despues que lei el metodo de colocarlo en el freezer por algunos minutos y que en verdad funciona por algunos minutos
cosa que e comprobado!!!
llegue a deducir que seria ??!!
Podría tratarse de una infracción de 183
bueno procegui en hacerle un reflujo ya que el mismo ahun prende procedi a usar
125 grados de calor
60 de aire
de una forma uniforme luego de decir el calor
encendió sin problemas
Espero les ayude
Click to expand...
Click to collapse
Hola! tengo el mismo problema, por cuanto tiempo le aplicaste el calor? le colocaste Flux si es así en que parte? no soy muy experto en esto pero quiero intentarlo.
Quedo atento. Saludos!.
Hello,
I have some problems with that head unit, before sending it back i would like to have some advice. I tried search and did not find anything about this. So my problems:
1. No internet when sim is insert, i can make phone calls and send sms. What is the solution?
2. Audio problems when turning off the car and going to the shop example. When coming back and starting the car there is no sound but unit turns on. Only solution that i can workaround is to turn off the car and lock the doors and unlock the doors. (maybe some immo/security problem?). My car is Mitsubishi Outlander 2015 and the right can bus have been chosen.
I hope that somebody can help me with this problems Internet is not must have, i can always hotspot but audio is my big problem.
Thank you for your help.
Meelis
good night I bought junsun v1 for golf VII and when I turn off the key the radio is still on what could it be?
boa noite comprei junsun v1 para golf VII e quando desligo a chave o rádio continua ligado o que poderá ser ?
hello colleagues, I have a junsun v1 pro 4g octacore 64gb I have the following problem: I had the screen installed and I removed it because it had image errors once removed from the vehicle I managed to repair the problem, I reinstalled it and the audio does NOT work and has disappeared the standard EQUALIZER and even the standard Igo browser, someone would know how to give me a solution I'm desperate, everything else works correctly
Thank you very much to all!!!!
hola compañeros , tengo un junsun v1 pro 4g octacore 64gb tengo el siguiente problema: tenia instalado la pantalla y la retire por que tenia fallos de imagen una vez retirada del vehiculo consegui reparar el problema , e vulto a instalarla y NO funciona el audio y a desaparecido el ECUALIZADOR de serie e incluso el navegador Igo de serie, alguien sabria darme alguna solución estoy desdesperado, todo lo demas funciona correctamente
Muchas Gracias a todos!!!!