Hi i have note 3 and i broke the lcd.when i power on ghe phone i hear the samsung sound in the beginning and the led turns blue and after 5 sec the soft keys stay always on.my pc can recognise the phone but because i have pin code i cannt see my files.also i can put the phone into download or recovery mode and be recognised.by.odin but when i try to call my number the phone do not ring and i think that this shouldnt happen.is there any way to check.if the.phone is functional except.from.the lcd.in order to buy a replacement screen?the phone is rooted.also it makes a small vibrate every 10 seconds.is there anyone that can help me thanks!!!
doyoulikeme22 said:
Hi i have note 3 and i broke the lcd.when i power on ghe phone i hear the samsung sound in the beginning and the led turns blue and after 5 sec the soft keys stay always on.my pc can recognise the phone but because i have pin code i cannt see my files.also i can put the phone into download or recovery mode and be recognised.by.odin but when i try to call my number the phone do not ring and i think that this shouldnt happen.is there any way to check.if the.phone is functional except.from.the lcd.in order to buy a replacement screen?the phone is rooted.also it makes a small vibrate every 10 seconds.is there anyone that can help me thanks!!!
Click to expand...
Click to collapse
If you have android debug mode in you can try to connect to a pc and run a few adb commands and see if the device connects.
Related
I have sky vega note 5, in this whenever I dial a phone number and the call is connected the screen goes black, the call is connected but no button is activated, even I am not able and to end the call. The phone is on stock ICS
ahsanshah said:
I have sky vega note 5, in this whenever I dial a phone number and the call is connected the screen goes black, the call is connected but no button is activated, even I am not able and to end the call. The phone is on stock ICS
Click to expand...
Click to collapse
me user of sky no 5
remember do not flash any wrong rom to your phone it will be dead boot only jtag can fix it and it will cost you time and money and more...
brother see if your screen protector are blacking the front sensors
if not try to factory reset
It sounds stupid but this happened one time on my gear fit, just was connected to my PC with the ODIN program open doing nothing, and I was on my phone trying to install the gfm (because I can't pair my note 5 with the gear fit), and suddenly I saw something on the watch's screen and I couldn't believe I was on the menu, I wanted to active the bluetooth and make it visible but it wasn't responding the visible option so that's why I had to restared, so now I'm back again in the activation screen :crying:
I have 1 week trying to figure it out what could I did, but I give up. Someone can help me?
e.riveram10 said:
It sounds stupid but this happened one time on my gear fit, just was connected to my PC with the ODIN program open doing nothing, and I was on my phone trying to install the gfm (because I can't pair my note 5 with the gear fit), and suddenly I saw something on the watch's screen and I couldn't believe I was on the menu, I wanted to active the bluetooth and make it visible but it wasn't responding the visible option so that's why I had to restared, so now I'm back again in the activation screen :crying:
I have 1 week trying to figure it out what could I did, but I give up. Someone can help me?
Click to expand...
Click to collapse
probably same method as others. press the name on the watch about 25-30 times. afterwards a message will pop up, wait until it disappears. press and hold the name again for a few seconds and it should get in.
el_venga said:
probably same method as others. press the name on the watch about 25-30 times. afterwards a message will pop up, wait until it disappears. press and hold the name again for a few seconds and it should get in.
Click to expand...
Click to collapse
Yes, I tried it but nothing I saw this method in youtube .
but Thank you!
looking for a bypass too. i use a Jolla Sailfish OS Phone and cant install the gear Fit manager (get parsingfail message). Is there no cfw to bypass it?
Hello everyone,
i got a problem with my z ultra and have tried looking similar problem on this forum but none of the solution seems working.
Please note that i have a stock phone, never did anything to it including unlocking rooting etc as i have no idea what it is, just casual usage.
So the problem occured when i tried to move an apps from sd card to my internal storage, and then my phone freezed midways,
the phone went unresponsive just showing the freezing screen.
Then i pushed the red button near the sim tray hoping the phone will reboot as i had similar problem before, and thought that it was just another minor problem and it worked.
But this time after pushing the red button the phone wont reboot again after i try to turn it on again using the power button, only a vibration but the screen showed no display whatsoever.
Ive been looking a solution on this forum with similar problem and there was a suggestion to connect the phone to power source and push the power and + vol together but there was only vibration thrice without indication of my problem has been solved.
Ive also tried a solution on youtube to disconnect the power cable, charge it to power source, wait for the Red LED to blink and reconnect the power cable again but it wasnt working.
Long story short after trying several method now my phone only blinking Red LED 3 times when i tried to turn it on, i tried to charge it to full but the Red LED keeps showing on even after i discharged it, so i had to push the power and + vol button to turn it off.
I suspect that my phone is hardbricked looking at the symptomps
Please anybody here could help me to fix it?
It's probably not hard-bricked.
Try this,
1, connect your USB cable to PC (without phone connected to it )
2, press volume up button and then plug in the usb cable to your phone
3, if light goes blue colour then you are back in business and you can still revive your phone
step 3 if successfull means your phone is up with fastboot mode and you can upload a recovery via flashtool
let me know your results ,
rgds
Hey guys,
So im experiencing something very weird. My phone randomly stop responding to touch. I cannot unlock the phone, I tried safe mode and now phones in airplane mode. Cant factory reset as it requires me to type "yes" on the screen. I don't have a way to connect a mouse to a USB c port atm. Also when it boots, the huawei logo isnt centered(the fancy blinking one, the normal initial white one with the android logo underneath is fine) and the fingerprint scanner logo is way bellow where it usually is. Any suggestions on what to do? I cant send it to service center as there are none in the country I am in right now. Is there a way to use my pc to somehow emulate a mouse on my phone? Any methods of force factory reset? Looking for anything that might work people!
Thanks, hope to hear from some of you guys soon.
Hi! Suddenly the screen on my new A52s is totally dead.
So it's gonna need repair or replace under warranty.
Before I send it in I need to wipe it using the Android find device service.
Problem is it cannot find the A52s. And I don't know if it's turned on or off since the screen is broken.
How do I turn it on and know it's on?
Will the find service find it even if it's turned on but not logged in, which probably will be the case if I manage to boot it.
The device is all stock.
Thanks in advance for any help!
Does it vibrate as you pressing the power button?
Zdrawko0o said:
Does it vibrate as you pressing the power button?
Click to expand...
Click to collapse
Yes. And I can see a weak flickering on screen but not so I can see icons / text.
I have also tried connecting it via USB to my pc and both phone and pc makes a plong noise.
But the phone is not shown in Windows explorer.