[Q] - AT&T HTC One (M7)

After unsuccessfully trying to manually update to 4.4.2 I have semi-bricked my phone.
Bootloader menu currently has Tampered, Relocked, Security Warning and S-On. I accidentally wiped data while in recovery while attempting to flash something. I had flashed (I believe) a modified stock kernel for 4.4 (or 4.3, not sure). Edit: Hboot 1.55
-Because it's not S-Off, I can't run an RUU.exe and downgrade.
-I can't seem to enter recovery either. It says "entering recovery" and then goes back to the bootloader screen. When I try to flash a new recovery, I get a "remote: signature verify fail" error. Any sort of recovery.img file gets this same error. I've tried installing a different recovery and the same error shows up.
-I've tried using revone: http://forum.xda-developers.com/showthread.php?t=2314582 except I it says "error: device not found" when I try to initiate it.
Is it possible to find a 4.3/4.4.2 RUU zip/exe and try to flash/run a current/higher version firmware? If anybody could also post a link to the stock 4.3 kernel it would be appreciated.
Thanks.
I need the phone for use very soon. Something tells me I did revone wrong. Any options I have? Isn't there a desktop program that lets you restore your HTC back to factory stock?

mch277 said:
After unsuccessfully trying to manually update to 4.4.2 I have semi-bricked my phone.
Bootloader menu currently has Tampered, Relocked, Security Warning and S-On. I accidentally wiped data while in recovery while attempting to flash something. I had flashed (I believe) a modified stock kernel for 4.4 (or 4.3, not sure).
-Because it's not S-Off, I can't run an RUU.exe and downgrade.
-I can't seem to enter recovery either. It says "entering recovery" and then goes back to the bootloader screen. When I try to flash a new recovery, I get a "remote: signature verify fail" error. Any sort of recovery.img file gets this same error. I've tried installing a different recovery and the same error shows up.
-I've tried using revone: http://forum.xda-developers.com/showthread.php?t=2314582 except I it says "error: device not found" when I try to initiate it.
Is it possible to find a 4.3/4.4.2 RUU zip/exe and try to flash/run a current/higher version firmware? If anybody could also post a link to the stock 4.3 kernel it would be appreciated.
Thanks.
I need the phone for use very soon. Something tells me I did revone wrong. Any options I have? Isn't there a desktop program that lets you restore your HTC back to factory stock?
Click to expand...
Click to collapse
Can you get into fastboot? If so, post the results of fastboot getvar all (minus IMEI and SN).

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4320mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

If you are attempting to get s-off revone will not work on you... You should try rumrunner instead
Sent from my HTC One using XDA Premium 4 mobile app

TopoX84 said:
If you are attempting to get s-off revone will not work on you... You should try rumrunner instead
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried. Except rumrunner needs you to be able to boot into Android first. I accidentally wiped data while in recovery (ROM, etc) and now I only have fastboot. I can't even access recovery/flash a new recovery/flash anything at all really. I can get into the silver HTC logo with "fastboot oem rebootRUU" but that's about it. Anything I attempt to flash while doing that will get a signature verification fail.

Update: I unlocked the bootloader again and can now enter recovery. The issue is, it appears that I have no "SD card". I can't access or even mount it to computer so I can put a ROM inside when I select "choose zip from /sdcard.

Related

[Q] Stuck in HBoot, Nothing I can do. Help?

Figured I'd ask the XDA community before I give up. I was working on an HTC Rezound that a kid had water damage on. Finally got it running but with the weirdest issues I've seen. I've tried alot, can't remember everything off the top of my head but I wanted to double check with you guys before I give up tomorrow.
First off Its HTCDev unlocked, S-ON with HBOOT 2.28. There is no ROM or OS on it, nor will it boot to any Recovery I successfully flash over. I can send and receive commands on fastboot, and sometimes can send them when I select REBOOT RECOVERY. That leads me to a black screen but adb devices shows it under recovery.
Tried flashing TWRP, using the All In One tool, flashing a Custom ROM, the RUU zip and exe, and Amon-Ra recovery. All leads to the same thing basically, loads into HBOOT fine but never boots into any recovery. I get signature verify failed sometimes when flashing but honestly it sends and successfully writes a recovery.img but wont load into it. Is it brain dead somewhere or what?
Thanks guys! I'll post the getvar
C:\Users\AZ's Gaming>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.28.0000
(bootloader) version-baseband: 2.23.10.0123r/2.23.10.0124r
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.00.000.0
(bootloader) serialno: HT19VS219499
(bootloader) imei: 990000336135878
(bootloader) product: vigor
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PH9810000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3746mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: cecc19f7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
DO THIS ADVICE ONLY IF NOBODY ELSE HAS BETTER IDEA..
Flash the latest ruu thru bootloader boot into recovery image while on stock to see if it works if it does then unlock hboot then flash recovery if it doesn't well we will have to dig a lil deeper
Sent from my Infected Rezound using xda app-developers app
Put the recovery.img file from the latest TWRP into your adb directory, then issue:
fastboot boot recovery.img (Note the BOOT command, not flash!)
and see if that gets you to TWRP, if not, you are probably in trouble... if it does, wipe everything except boot and flash in a known stable ROM image like Global OTA Stock/Rooted, Infection, Beanstalk, or something like that.
Your fastboot getvar looks fine, except battery voltage is really low (should be around 3.9-4.2) and the version-main is messed up, meaning it doesn't see a ROM installed.
acejavelin said:
Put the recovery.img file from the latest TWRP into your adb directory, then issue:
fastboot boot recovery.img (Note the BOOT command, not flash!)
and see if that gets you to TWRP, if not, you are probably in trouble... if it does, wipe everything except boot and flash in a known stable ROM image like Global OTA Stock/Rooted, Infection, Beanstalk, or something like that.
Your fastboot getvar looks fine, except battery voltage is really low (should be around 3.9-4.2) and the version-main is messed up, meaning it doesn't see a ROM installed.
Click to expand...
Click to collapse
I tried this first because it was the only thing I haven't done, and I got nothing. It boots into a recovery I think because it shows up under adb devices but still get a black screen. I think the phone is toast.
NINJA EDIT: The menu and home buttons vibrate when I hit them, so it must be booted into recovery, just for some reason nothing is displayed.

[Q] Another plea for help!

I attempted to install the latest Viper ROM over the Viper I had currently on my HTC One. It said it installed, then went to reboot, and stayed on the white screen for a while. I rebooted, but it did the same thing again. I got to looking in TWRP and it didn't have an OS installed, and it had wiped my backups. Now, I can get to TWRP, and I can get to Fastboot, but I can't connect with ADB. I have an OTG USB cable, but when I try to install a zip from my USB drive, I get the error message, "E:Unable to mount '/system'". When I go to MOUNT in TWRP, it won't let me select System to mount it.
I thought this would be the perfect time to go with the GPE RUU, but I can't connect with ADB.
What do I do? (deep breaths taken already)
try formating your data in twrp then reboot into recovery then mount usb-otg and flash or transver then rom to sd card
rushwal said:
I attempted to install the latest Viper ROM over the Viper I had currently on my HTC One. It said it installed, then went to reboot, and stayed on the white screen for a while. I rebooted, but it did the same thing again. I got to looking in TWRP and it didn't have an OS installed, and it had wiped my backups. Now, I can get to TWRP, and I can get to Fastboot, but I can't connect with ADB. I have an OTG USB cable, but when I try to install a zip from my USB drive, I get the error message, "E:Unable to mount '/system'". When I go to MOUNT in TWRP, it won't let me select System to mount it.
I thought this would be the perfect time to go with the GPE RUU, but I can't connect with ADB.
What do I do? (deep breaths taken already)
Click to expand...
Click to collapse
did you flash the newest version of TWRP 2.6.3.3 ?
When I flash from the usb otg adapter
I shut the phone completely off
hookup the cable and flash drive
bootup recovery / select wipe/ factory reset / then install
on the install screen I browse to the usb otg by tapping the Storage: and choosing usb otg
then back and when you choose install again you should be in the root of the flash drive
choose your rom and install. first boot up sometimes takes over 5 min to complete be patient before you give up and reboot the phone from the white htc screen.
clsA said:
did you flash the newest version of TWRP 2.6.3.3 ?
When I flash from the usb otg adapter
I shut the phone completely off
hookup the cable and flash drive
bootup recovery / select wipe/ factory reset / then install
on the install screen I browse to the usb otg by tapping the Storage: and choosing usb otg
then back and when you choose install again you should be in the root of the flash drive
choose your rom and install. first boot up sometimes takes over 5 min to complete be patient before you give up and reboot the phone from the white htc screen.
Click to expand...
Click to collapse
How do I install new version of TWRP other than by methods on the TWRP web page? If I can't adb, can't do it by app?
http://teamw.in/project/twrp2/164
When I try to Factory Reset, I get the cannot mount SYSTEM error.
When I try to install, I get the cannot mount SYSTEM error.
Terror starting to creep in despite deep breaths.
rushwal said:
How do I install new version of TWRP other than by methods on the TWRP web page? If I can't adb, can't do it by app?
http://teamw.in/project/twrp2/164
When I try to Factory Reset, I get the cannot mount SYSTEM error.
When I try to install, I get the cannot mount SYSTEM error.
Terror starting to creep in despite deep breaths.
Click to expand...
Click to collapse
Here is the recovery flashable version of twrp 2.6.3.3
Turn the phone completely off (hold power for 10-15 seconds)
now boot to recovery power + vol down
then flash the file below and repeat the power off
thanks!
clsA said:
Here is the recovery flashable version of twrp 2.6.3.3
Turn the phone completely off (hold power for 10-15 seconds)
now boot to recovery power + vol down
then flash the file below and repeat the power off
Click to expand...
Click to collapse
Still getting Unable to mount System error.
rushwal said:
Still getting Unable to mount System error.
Click to expand...
Click to collapse
can you post the results for fastboot getvar all and maybe you can RUU back to stock
clsA said:
can you post the results for fastboot getvar all and maybe you can RUU back to stock
Click to expand...
Click to collapse
I'm not able to connect via ADB.
rushwal said:
I'm not able to connect via ADB.
Click to expand...
Click to collapse
Have you tried fastboot from the bootloader screen?
What os is on your PC?
How did you unlock the bootloader to get twrp?
Sent from my HTC One using Tapatalk
clsA said:
Have you tried fastboot from the bootloader screen?
What os is on your PC?
How did you unlock the bootloader to get twrp?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If I power up the device, it starts up into TWRP. If I hold down pwr+vol down, I can get into fastboot, but I haven't found anything I can do from there except boot into recovery.
I've been using my Windows 8.1 laptop, but I also have access to a Windows 7.
I used the HTC dev web site to unlock back when I got it. I had to do the change to Rogers device in order to unlock. It's been a while since I did this, and I've been running Viper ROM for so long, I don't remember everything I've done.
Thanks for your help!
rushwal said:
If I power up the device, it starts up into TWRP. If I hold down pwr+vol down, I can get into fastboot, but I haven't found anything I can do from there except boot into recovery.
I've been using my Windows 8.1 laptop, but I also have access to a Windows 7.
I used the HTC dev web site to unlock back when I got it. I had to do the change to Rogers device in order to unlock. It's been a while since I did this, and I've been running Viper ROM for so long, I don't remember everything I've done.
Thanks for your help!
Click to expand...
Click to collapse
From the win 7 PC boot to the bootloader fastboot USB and run the command fastboot getvar all and post your results
This will tell what hboot your on and the mainver of your firmware, so you can determine which RUU will return your phone to Stock
Sent from my HTC One using Tapatalk
clsA said:
From the win 7 PC boot to the bootloader fastboot USB and run the command fastboot getvar all and post your results
This will tell what hboot your on and the mainver of your firmware, so you can determine which RUU will return your phone to Stock
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks, I will try when I get home.
clsA said:
From the win 7 PC boot to the bootloader fastboot USB and run the command fastboot getvar all and post your results
This will tell what hboot your on and the mainver of your firmware, so you can determine which RUU will return your phone to Stock
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Ok, finally got ADB working on the W7 machine.
C:\Users\Walter>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4211mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.046s
rushwal said:
Ok, finally got ADB working on the W7 machine.
C:\Users\Walter>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4211mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.046s
Click to expand...
Click to collapse
Fantastic your phone has never been updated.. it will be easy to s-off with revone
you should do that right away. after that thier are a bunch of AT&T files you can use to get your phone back into new condition.
http://www.htc1guru.com/downloads/ruu-file-downloads/
all the files with cingular in the name will work on your phone
I would go directly to US 3.17.502.3 after you get s-off
edit your post and remove you serial and iemi like I did in the quote
clsA said:
Fantastic your phone has never been updated.. it will be easy to s-off with revone
you should do that right away. after that thier are a bunch of AT&T files you can use to get your phone back into new condition.
http://www.htc1guru.com/downloads/ruu-file-downloads/
all the files with cingular in the name will work on your phone
I would go directly to US 3.17.502.3 after you get s-off
edit your post and remove you serial and iemi like I did in the quote
Click to expand...
Click to collapse
What if I want to put GPE on it. Easy?
clsA said:
Fantastic your phone has never been updated.. it will be easy to s-off with revone
you should do that right away. after that thier are a bunch of AT&T files you can use to get your phone back into new condition.
http://www.htc1guru.com/downloads/ruu-file-downloads/
all the files with cingular in the name will work on your phone
I would go directly to US 3.17.502.3 after you get s-off
edit your post and remove you serial and iemi like I did in the quote
Click to expand...
Click to collapse
I keep getting device not found when I try to ADB.
rushwal said:
I keep getting device not found when I try to ADB.
Click to expand...
Click to collapse
adb only works in recovery or when the phone is booted to android
you can convert to GPE, but you need to run the AT&T RUU first to make sure all your partitions are correct
and your phone is working correctly. I still recommend getting s-off first
and here's a tutorial on RUU
http://www.andromods.com/unroot-locking/how-to-restore-to-stock-unbrick-unrooting-htc-one-m7.html
clsA said:
adb only works in recovery or when the phone is booted to android
you can convert to GPE, but you need to run the AT&T RUU first to make sure all your partitions are correct
and your phone is working correctly. I still recommend getting s-off first
and here's a tutorial on RUU
http://www.andromods.com/unroot-locking/how-to-restore-to-stock-unbrick-unrooting-htc-one-m7.html
Click to expand...
Click to collapse
While in recovery, when I try to ADB following the instructions to get S-OFF using revone, I am getting device not found.
Ok, I'm back running again! Thanks for your help!
Now to get GPE on there.

[Q] Stuck in a bootloop

Hi everyone,
I have my AT&T HTC One that's stuck in a bootloop due to me flashing a ROM (ARHD). I did not notice I still had S-On (S-Off is needed to flash the ROM) and now stuck in a loop. I can access recovery (TWRP 2.6.3.3) but sideload just stays at the message that's says its starting.
Bootloader is also accessible, I have all my adb files and fastboot files. I just want to get back to stock 4.3 or 4.4.2, or even a custom rom if it'll work.
Here are my vars:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4322mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.069s
Any help is appreciated.
EDIT: Managed to get sideload working, just opened cmd and had the TWRP running sideload, but it was stuck at the words starting so I checked for devices and found it. sideloaded stock AT&t rooted ROM by dark 2099 (http://forum.xda-developers.com/showthread.php?t=2676986) and still bootlooping after wiping caches and factory reset.
EDIT2: Sideloaded the ROM again now not bootlooping but stuck at HTC logo, still can use recovery and bootloader.
52me52 said:
Hi everyone,
I have my AT&T HTC One that's stuck in a bootloop due to me flashing a ROM (ARHD). I did not notice I still had S-On (S-Off is needed to flash the ROM) and now stuck in a loop. I can access recovery (TWRP 2.6.3.3) but sideload just stays at the message that's says its starting.
Bootloader is also accessible, I have all my adb files and fastboot files. I just want to get back to stock 4.3 or 4.4.2, or even a custom rom if it'll work.
Here are my vars:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.502.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT3*********
(bootloader) imei: 354***********
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4322mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.069s
Any help is appreciated.
EDIT: Managed to get sideload working, just opened cmd and had the TWRP running sideload, but it was stuck at the words starting so I checked for devices and found it. sideloaded stock AT&t rooted ROM by dark 2099 (http://forum.xda-developers.com/showthread.php?t=2676986) and still bootlooping after wiping caches and factory reset.
EDIT2: Sideloaded the ROM again now not bootlooping but stuck at HTC logo, still can use recovery and bootloader.
Click to expand...
Click to collapse
Edit your post to remove the serial no and IMEI
Try fastboot erase cache from fastboot USB (bootloader)
And how did you get to version-main: 4.20.502.1 ?
clsA said:
Edit your post to remove the serial no and IMEI
Try fastboot erase cache from fastboot USB (bootloader)
And how did you get to version-main: 4.20.502.1 ?
Click to expand...
Click to collapse
Hoping to hear from you, saw you in other Q&A posts!
I tried that fastboot erase cache still same thing. Any help is appreciated, hopefully I can get this done today it's my dad's.
EDIT: thinking about using an RUU but method would I take? .exe or .zip? I tried using an RUU and it failed and gave me that somehow. .exe RUU btw.
EDIT: the RUU is called elevate-RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2
52me52 said:
Hoping to hear from you, saw you in other Q&A posts!
I tried that fastboot erase cache still same thing. Any help is appreciated, hopefully I can get this done today it's my dad's.
Click to expand...
Click to collapse
Flash twrp again and erase cache after
what rom are you sideloading ? nvm I see
you cant RUU your software is too new and you need s-off
where did you find this
EDIT: the RUU is called elevate-RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R1 0_Radio_4T.24.3218.09_10.26.1718.01L_release_35656 5_signed_2
Click to expand...
Click to collapse
clsA said:
Flash twrp again and erase cache after
what rom are you sideloading ? nvm I see
you cant RUU your software is too new and you need s-off
Click to expand...
Click to collapse
Same situation still at HTC logo, ok I just saw that now too about the RUU.
Link:http://www.androidruu.com/index.php?developer=M7 first one.
52me52 said:
Same situation still at HTC logo, ok I just saw that now too about the RUU.
Click to expand...
Click to collapse
slow down and answer these questions
how did you get to version-main: 4.20.502.1 ?
and where is the RUU you listed.
also are you doing MD5 check of all the files your flashing ?
clsA said:
slow down and answer these questions
how did you get to version-main: 4.20.502.1 ?
and where is the RUU you listed.
also are you doing MD5 check of all the files your flashing ?
Click to expand...
Click to collapse
1) from the RUU I used.
2)just posted/edited
3)No I don't really do that
52me52 said:
1) from the RUU I used. ??? link
2)just posted/edited ??? link
3)No I don't really do that - how do you know your files are not corrupt ?
Click to expand...
Click to collapse
If everything is a big secret I can't help you
clsA said:
If everything is a big secret I can't help you
Click to expand...
Click to collapse
It's my link from the post above your last one: http://www.androidruu.com/index.php?developer=M7
I never check the MD5 because I never had a problem until now.
What would you recommend at this point?
52me52 said:
It's my link from the post above your last one: http://www.androidruu.com/index.php?developer=M7
I never check the MD5 because I never had a problem until now.
Click to expand...
Click to collapse
Who posted this RUU .. how did you find it ?
and why is it not the same main version as in you getvar
I'm downloading it now I'll see whats up
clsA said:
Who posted this RUU .. how did you find it ?
and why is it not the same main version as in you getvar
I'm downloading it now I'll see whats up
Click to expand...
Click to collapse
I came across this link: http://forum.xda-developers.com/showthread.php?t=2265618
I scrolled down to return to stock and pressed the first link for RUUs here: http://forum.xda-developers.com/showthread.php?t=2194707
pressed m7 and got the page of the RUUs.
The main version I don't really know, I ran it and it failed and when I redid the 'fastboot getvar all' I saw it. Thanks for all your help.
52me52 said:
I came across this link: http://forum.xda-developers.com/showthread.php?t=2265618
I scrolled down to return to stock and pressed the first link for RUUs here: http://forum.xda-developers.com/showthread.php?t=2194707
pressed m7 and got the page of the RUUs.
The main version I don't really know, I ran it and it failed and when I redid the 'fastboot getvar all' I saw it. Thanks for all your help.
Click to expand...
Click to collapse
Ok well it appears to be a Real RUU
but the MD5 failed - means it's corrupt
can you md5 check your file and compare it to mine ?
this is the md5 on the download page
fdbaccdda9519a321059b02e2dec49b2
clsA said:
Ok well it appears to be a Real RUU
but the MD5 failed - means it's corrupt
can you md5 check your file and compare it to mine ?
this is the md5 on the download page
fdbaccdda9519a321059b02e2dec49b2
Click to expand...
Click to collapse
Mine also failed same thing. Except my code in orange is different than yours.
52me52 said:
Mine also failed same thing. Except my code in orange is different than yours.
Click to expand...
Click to collapse
ok well lets try and get your phone working
flash this stock recovery
https://www.dropbox.com/s/rns2nj5hn7lwjln/recovery.img
then do a factory reset from the bootloader
I'll post more here while your do that...
Next step is redownload TWRP from here
http://techerrata.com/browse/twrp2/m7
and md5 check it
then flash it
and redownload My Rom here >> http://www.androidfilehost.com/?fid=23329332407576941
again md5 check it and sideload it
clsA said:
ok well lets try and get your phone working
flash this stock recovery
https://www.dropbox.com/s/rns2nj5hn7lwjln/recovery.img
then do a factory reset from the bootloader
I'll post more here while your do that
Click to expand...
Click to collapse
Good bless you and thanks, but should I do a backup of some sort?
52me52 said:
Good bless you and thanks, but should I do a backup of some sort?
Click to expand...
Click to collapse
no theirs nothing to backup
I downloaded the RUU again and got the exact same number as the first time
MD5: 5F121D72B8FA3F6F1704588467752605
clsA said:
no theirs nothing to backup
Click to expand...
Click to collapse
15-17 minutes till download finishes, sorry for keeping you up and thanks for the help.
52me52 said:
15-17 minutes till download finishes, sorry for keeping you up and thanks for the help.
Click to expand...
Click to collapse
did you flash the stock recovery and do the factory reset ?
did the phone try and boot up ?
first boot will sometimes take 5 - 7 min on the HTC logo
clsA said:
did you flash the stock recovery and do the factory reset ?
did the phone try and boot up ?
first boot will sometimes take 5 - 7 min on the HTC logo
Click to expand...
Click to collapse
Did that and stays on the logo, going to flash your rom now.
I got a bad md5, do I pick a mirror to download?
52me52 said:
Did that and stays on the logo, going to flash your rom now.
Click to expand...
Click to collapse
just don't forget everytime you flash a recovery to erase cache
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
and in TWRP when you do factory reset
clear delvic and cache also
not sdcard

Stuck in FASTBOOT...

Hi all,
My girlfriend got a China Mobile htc Desire 610t.
When I tried to unlock / use CWM recovery / root in order to upgrade it to a regular (non-chinese) Android, I got stuck at some point and now the phone keeps booting into FASTBOOT... even when I say POWER DOWN, it'll come back to FASTBOOT
Any ideas? I looked at several other posts but none of the suggested things seem to work.
The main problem from the beginning of my efforts was that I can't seem to get into recovery mode... the phone says "Entering Recovery..." but then it just goes back to FASTBOOT.
I also tried to find an RUU but none I found for the htc 610 would pass the signature check.
Any ideas?
getvar gives me these details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.101.1161.16.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.37.1403.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC45NWS02483
(bootloader) imei: not needed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a3_tl
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9O50000
(bootloader) cidnum: HTCCN704
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 04768f7d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any help is highly appreciated!!!
Martin
MartinNeedsHelp said:
Hi all,
My girlfriend got a China Mobile htc Desire 610t.
When I tried to unlock / use CWM recovery / root in order to upgrade it to a regular (non-chinese) Android, I got stuck at some point and now the phone keeps booting into FASTBOOT... even when I say POWER DOWN, it'll come back to FASTBOOT
Any ideas? I looked at several other posts but none of the suggested things seem to work.
The main problem from the beginning of my efforts was that I can't seem to get into recovery mode... the phone says "Entering Recovery..." but then it just goes back to FASTBOOT.
I also tried to find an RUU but none I found for the htc 610 would pass the signature check.
Any ideas?
getvar gives me these details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.101.1161.16.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.37.1403.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC45NWS02483
(bootloader) imei: not needed
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a3_tl
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P9O50000
(bootloader) cidnum: HTCCN704
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 04768f7d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Any help is highly appreciated!!!
Martin
Click to expand...
Click to collapse
One more thing, while the phone tries to get into recovery mode, I see the following text in red at the bottom of the screen:
"This build is for development purposes only. Do not distribute outside of HTC without HTC's written permission. Failure to comply may lead to legal action."
hi
try reflash twrp recovery by dd Install Method if you have rooted device.
Thanks for the quick reply.
Since I was never able to get into recovery mode, the device is unlocked but not rooted.
So the SU method won't work.
I can place fastboot commands and flashed different recovery packages already (twrp, cwm, stock) unfortunately without success. The phone just won't load the recovery mode.
Any ideas?
The desire 610 doesn't support any custom recoveries besides TWRP. I dint know why u used CWM because it doesn't support the desire 610. So if u flash TWRP for the a3_tl it should be fine.
Sent from my HTC Desire 610 using XDA Free mobile app
try this methode:
Fastboot Install Method (No Root Required):
You will need the platform-tools from the Android SDK on your computer. Find the SDK Only section on the page linked and install the SDK and download only the platform-tools to get adb and fastboot binaries.
Windows users will need proper drivers installed on your computer. You can try the Naked ADB drivers or the Universal ADB drivers if you don't already have a working driver installed
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode. Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
there is direct link: TWRP
michelkovacic said:
try this methode:
Fastboot Install Method (No Root Required):
You will need the platform-tools from the Android SDK on your computer. Find the SDK Only section on the page linked and install the SDK and download only the platform-tools to get adb and fastboot binaries.
Windows users will need proper drivers installed on your computer. You can try the Naked ADB drivers or the Universal ADB drivers if you don't already have a working driver installed
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode. Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
there is direct link:
Click to expand...
Click to collapse
Thanks michelkovacic, I had tried that already - even with different versions of TWRP - unfortunately with no success.
I tried it again now and installed twrp-2.8.7.0-a3ul.img. Got the OKAY / OKAY in the cmd windows but when I choose "RECOVERY" in HBOOT, I see the htc logo for a short second and am back in FASTBOOT (or FASTBOOT USB if the USB is still connected).
I tried to find "the proper key combo to enter recovery"... but was unsuccessfull... Also, I don't know when to push it. E.g. I never get the screen with the red attention sign like with most stock recoveries where you can then press keys... this D610 jumps right back into the FASTBOOT menu...
Reading MGfusion's reply, I noticed that I had used the wrong TWRP... all I can find for the D610 is for a3_ul... but mine is a3_tl...!
Any idea where I can find that TWRP or even the stock recovery for that model?
Googling didn't help much and only sent my Antivirus into a frenzy...
Any more ideas?
MGfusion said:
The desire 610 doesn't support any custom recoveries besides TWRP. I dint know why u used CWM because it doesn't support the desire 610. So if u flash TWRP for the a3_tl it should be fine.
Sent from my HTC Desire 610 using XDA Free mobile app
Click to expand...
Click to collapse
Hi MGfusion,
I tried several versions of TWRP first, none of them worked (--> after flashing them and hitting "RECOVERY" in HBOOT, I always saw the htc logo for a quick second and was right back in the FASTBOOT menu...)
So you mention "the a3_tl"... when I search for the TWRP for the D610, I always see the "a3ul"... maybe that's my problem?!
Any tipps, where I can find the TWRP recovery for a3_tl? So far I only got malware offered...
Thanks!
a3ul I's the same as a3tl it just means they are from models from different regions
Sent from my HTC Desire 610 using XDA Free mobile app
any progress?
I got the same china mobile version D610T and stuck at same place~~
MGfusion said:
a3ul I's the same as a3tl it just means they are from models from different regions
Sent from my HTC Desire 610 using XDA Free mobile app
Click to expand...
Click to collapse
OK, I just - again - flashed every available a3_ul TWRP... without success.
I tried
twrp-2.8.7.0-a3ul.img 11.3M
twrp-2.8.6.0-a3ul.img 11.2M
twrp-2.8.5.0-a3ul.img 11.1M
twrp-2.8.4.0-a3ul.img 11.1M
twrp-2.8.3.0-a3ul.img 11.1M
twrp-2.8.1.0-a3ul.img 11M
twrp-2.8.0.1-a3ul.img 10.8M
twrp-2.8.0.0-a3ul.img 10.8M
twrp-2.7.1.0-a3ul.img 10.7M
and always got an OKAY / OKAY from fastboot, did the reboot, tried to get into recovery and... was back to FASTBOOT.
Again, for a quick second I see "Entering Recovery..." on the top and bam, I'm back in FASTBOOT.
The FASTBOOT screen shows "*** TAMPERED ***" and "*** UNLOCKED ***" on top.
There must be something I could do...?!
I also tried to find an RUU but none worked with my phone. They all failed the signature check.
Any help would be highly appreciated!
flyingcowboy said:
any progress?
I got the same china mobile version D610T and stuck at same place~~
Click to expand...
Click to collapse
Unfortunately not .
:crying::crying::crying:
MartinNeedsHelp said:
Unfortunately not .
Click to expand...
Click to collapse
Hi,
Are you still having issues? If so check this article out: http://forum.xda-developers.com/desire-610/general/info-htcdev-unlock-root-t2844323 I had the same issue with being stuck in fastboot and went through the HTCDev bootloader unlock. It gives you step by step instructions on how to unlock the bootloader. If phone shows unlocked in fastboot I would just command "fastboot oem lock" that'll relock it, then do the htcdev bootloader unlock.
HTCDev Bootloader Unlock: "Under "Select Your Device", scroll ALL THE WAY TO THE BOTTOM, and choose "All Other Supported Models". I know it works, because I just did it. IT WILL WIPE YOUR DEVICE DATA."
Hope this helps.
Sent from my HTC Desire 610 using XDA Free mobile app
Thanks for the tip!
I'll make sure I try that when I'm back at home, out if town for a couple weeks.
stuck in boot loader - ClearD Please help!!!!
MartinNeedsHelp said:
Thanks for the tip!
I'll make sure I try that when I'm back at home, out if town for a couple weeks.
Click to expand...
Click to collapse
i tried relocking my bootloader so that i could update the RUU..unfortunately my phone now does not turn on...it keeps booting and rebooting to fastboot...i cant access recovery...each time i try it reboots to the htc logo but then goes straight to the fastboot menu...i can access the phone through cdm or adb but my pc does not recognize the phone in my computer...this is my only phone and im afraid that i might have bricked the device....please anyone if u have any knowledge on how to solve this issue, i would greatly appreciate it...by any chance the person that started this topic Martinneedshelp could assist me....any one please:crying:
Unfortunately my phone is also still in that state. Nothing really worked so far. So as long as no one here has any further ideas, I think we're screwed.
MartinNeedsHelp said:
Unfortunately my phone is also still in that state. Nothing really worked so far. So as long as no one here has any further ideas, I think we're screwed.
Click to expand...
Click to collapse
Luckily i got my phone to boot...the solution i found was to download a RUU file...from the htc ROM downloads page...ran it from my pc with the phone connected...it updated the rom and booted the phone...
My problem now is with the wifi not connecting...i had this problem b4 after rooting the phone...ClearD was kind enough to assist me in getting that fixed by booting into recover and wiping dalvik cache...that was successful then but now since i dont have root access anymore, i dont have twrp installed therefore i cant boot into recovery to wipe dalvik..
I dont want to root the phone again so i was wondering if anyone had a solution in getting the wifi to work...
Find another way to wipe the dalvik cache
Sent from my HTC Desire 610 using XDA Free mobile app
same problem with same cid
any help ? ((((
my phone only fastboot!

Bricked my Device!Bootloader unlock method doesnt work!

I have a international t6UL, S-on and locked
Os-4.14.401.10
HBOOT-2.49.0000
Stuck in the bootloop,
Tried to unlock the deveice with htc bootloader unlocker , Flashed the unlock bin but it doesnt work,after flashing the bin and hitting yes it takes me to recovery but the bootloader remains locked!
Tried to factory reset & wipe but it just freezes there! tried to install a stock ota using stock recovery but it says failed to map file, I guess my internal storage got corrupted too!
Help help help !!!:crying::crying::crying::crying:
Its not bricked. A brick device is when u cant turn on at all n cant even access bootloader.
itsmelutfor said:
Its not bricked. A brick device is when u cant turn on at all n cant even access bootloader.
Click to expand...
Click to collapse
any solution ????
RUU
nukedanoob said:
any solution ????
Click to expand...
Click to collapse
Restore from RUU?
Your system is windows?,reinstall driver of htc and probe it another time,of change the program whit htc one max toolkit to me it serves
nukedanoob said:
i have a international t6ul, s-on and locked
os-4.14.401.10
hboot-2.49.0000
stuck in the bootloop,
tried to unlock the deveice with htc bootloader unlocker , flashed the unlock bin but it doesnt work,after flashing the bin and hitting yes it takes me to recovery but the bootloader remains locked!
Tried to factory reset & wipe but it just freezes there! Tried to install a stock ota using stock recovery but it says failed to map file, i guess my internal storage got corrupted too!
Help help help !!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
i have the same problem did you get any solution for this. Can't unlock bootload as my usb debugging & oem is not enabled.
nukedanoob said:
I have a international t6UL, S-on and locked
Os-4.14.401.10
HBOOT-2.49.0000
Stuck in the bootloop,
Tried to unlock the deveice with htc bootloader unlocker , Flashed the unlock bin but it doesnt work,after flashing the bin and hitting yes it takes me to recovery but the bootloader remains locked!
Tried to factory reset & wipe but it just freezes there! tried to install a stock ota using stock recovery but it says failed to map file, I guess my internal storage got corrupted too!
Help help help !!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Please share your solution. I have the exact problem and the same phone
abs03061985 said:
i have the same problem did you get any solution for this. Can't unlock bootload as my usb debugging & oem is not enabled.
Click to expand...
Click to collapse
MY VAR RESULT IF THIS HELPS
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.14.401.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA3C4WG01080
(bootloader) imei: *************
(bootloader) meid: 00000000000000
(bootloader) product: t6ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: 0P3P51000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d0e3b226
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
This thread is Active or do I need to create a new thread

Categories

Resources