This thread was originally me asking where I can find the latest radios to update (in case you are using a custom ROM rather than the OTA update), but I have a thread in the AT&T forum that links to both AT&T and T-Mobile radios!
If you are looking for the latest (or any) radio:
http://forum.xda-developers.com/showthread.php?t=2419699 (Newest radios are on the BOTTOM of the list)
Thanks...just what I was looking for.
Sent from my One using Tapatalk
Related
I rooted with Revolt. long time ago, and my ROM is Infectedrom.
Android v 2.3.4
HTC Sense 3.5
software 2.11.605.5
Baseband 1.48.000.0930w_3,0.01.78.0916w_3
I have hboot to the PG05IMG.zip several times and it contains the latest radio files and give me good updates on the hboot screen, but still no 605.9.
Any ideas would be helpful,
Ron
If im reading your post right, you have to flash a rom with 605.9 as its base. You flash roms through recovery not hboot. Flashing the radios will not change the software version..
Okay, slightly confused. How do I tell if I have the latest radio file versions? I thought the Software number was the radio files version, 2.11.605.5. What should I be looking for?
My rom (Build number?), InfectedROM Eternity (Nightly), is fine and I assume its the latest and greatest.
You got a noob here, but trying--you and me!!
Jrocker23 said:
If im reading your post right, you have to flash a rom with 605.9 as its base. You flash roms through recovery not hboot. Flashing the radios will not change the software version..
Click to expand...
Click to collapse
Can you flash a radio using Clockwork?
The Software version is NOT the radio version. If you go into settings, about phone, software info, more info, you should see baseband version under the kernel version. The baseband version is your radio version.
The latest radio that came with latest OTA is 0.01.78.0916w_3
orkillakilla said:
The Software version is NOT the radio version. If you go into settings, about phone, software info, more info, you should see baseband version under the kernel version. The baseband version is your radio version.
The latest radio that came with latest OTA is 0.01.78.0916w_3
Click to expand...
Click to collapse
Thanks, therefore my radio is up to date (see first post). Can you unconfuse (if that is a word) me on what is 605.5 and 605.9 software version and where I should be.
Thanks for the reply,
Ron
605.5 and 605.9 are versions of the phone's official firmware, 605.9 being the most up to date. the newest radio in question was included in 605.9 as an update to the older radio, but it was extracted from that firmware release so that rooted users could update only the radio and not the entire firmware.
that's what you've done already.
if you're rooted and running a ROM that you like and works for you, there isn't any reason to upgrade your firmware version (especially since you've already installed the newest radio). if there are big features or changes in 605.9 that the developers want to include in their ROM, they will release a new version of that ROM for you to flash. also, 605.9 has caused most (all?) rooted users who accepted the upgrade to lose root.
basically - if you updated to the newest radio, everything works and you're happy with it, don't worry about it. keep an eye on your favorite ROM's thread for updates from those developers and don't sweat Verizon's official releases.
(please do correct me if I have any of that wrong!)
number5toad said:
605.5 and 605.9 are versions of the phone's official firmware, 605.9 being the most up to date. the newest radio in question was included in 605.9 as an update to the older radio, but it was extracted from that firmware release so that rooted users could update only the radio and not the entire firmware.
that's what you've done already.
if you're rooted and running a ROM that you like and works for you, there isn't any reason to upgrade your firmware version (especially since you've already installed the newest radio). if there are big features or changes in 605.9 that the developers want to include in their ROM, they will release a new version of that ROM for you to flash. also, 605.9 has caused most (all?) rooted users who accepted the upgrade to lose root.
basically - if you updated to the newest radio, everything works and you're happy with it, don't worry about it. keep an eye on your favorite ROM's thread for updates from those developers and don't sweat Verizon's official releases.
(please do correct me if I have any of that wrong!)
Click to expand...
Click to collapse
THANK YOU!!!!
I needed that education, but I am sure that was obvious. I will watch and wait my rom developer for additional updates.
BTW, the Rezound battery is GREAT. A little tight, and I should have polished the edges because it is gonna be hard taking it out.
However, thanks for that explanation....I feel so much better.
Ron
rpinsc said:
THANK YOU!!!!
I needed that education, but I am sure that was obvious. I will watch and wait my rom developer for additional updates.
BTW, the Rezound battery is GREAT. A little tight, and I should have polished the edges because it is gonna be hard taking it out.
However, thanks for that explanation....I feel so much better.
Ron
Click to expand...
Click to collapse
I think when I get paid next I'm going to get a rezound battery. I get good battery life with the stock battery, so I'm sure I'll get great life with the rezound's
I have a firmware question that I can't seem to find the answer to by searching. I am running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? If I should upgrade, what it's the version I should download? Longtime Samsung user so please excuse the noobness.
If alls running well, then plz avoid ... however, in ARHD thread many AT&T users have updated the firmware without any side-effects
Best to post Q in that thread itself
asjshenry said:
I have a firmware question that I can't seem to find the answer to by searching. I am running arhd 11 on an att HTC one. Should I upgrade the firmware on my phone? Will there be any benefits to this since I am on att and not international? Also how do I go about updating the firmware and does it wipe the device? If I should upgrade, what it's the version I should download? Longtime Samsung user so please excuse the noobness.
Click to expand...
Click to collapse
It is currently not mandatory to flash the new firmware for ARHD, but it does provide a noticeable increase performance depending on the current firmware version you are running, I was running 1.26 on my AT&T m7 and the screen and touch buttons have been much more responsive now that I am running the new 2.24. Flashing the new firmware will also update the baseband, providing you with the latest radio (but performance of this will vary from region to region.
If you go to this link, it will give you some great instructions on the update process.
http://forum.xda-developers.com/showpost.php?p=42556698&postcount=24958
BTW, you will need to be s-off and change your cid to 11111111. As long as you take your time and follow the directions completely you will be fine. If you do update make sure you flash the firmware TWICE when it says to, and make sure you re-flash your custom recovery because it will get replaced during the updating process. This process will not delete your sd card and you will be able to run your current ARHD, but it is recommended to do a clean install after. And you might as well since 12.0 is out.
hope this helps
I'm getting a failed not allowed error when trying to 'fastboot flash zip'
I successfully have s-off and changed CID but can't get firmware to flash
Edit: not sure what happened but I was able to push the zip successfully. Maybe from adding the path of the file instead of just the zip file? Anyway, it worked.
Sent from my HTC One using xda premium
IF the rom is tweaked right theres no real reason to update the firmware to euro build,Id wait till att variant or the dev variant gets the update and then worry about it.
i see that most of the roms for our phones are this version 1.54.401.5, and my phone is still running 1.12.502.18.
i not new to rooting or changing roms, just new to htc which is a little more in depth than samsung was. so my question is should i up date to this version or should i wait, and if i need to update where can i find that version and intructions to install.
i am rooted, unlocked and s-off right now. thanks in advance.
The version your running is the most current for the ATT Variant(has not been updated via carrier yet),The latest US WWE version out is 1.54.1540.9(4-19-2014 build date) which is US Developer Edition, The 1.54.401.5 (3-22-2014 build date) is WWE European build...Choice is yours though...theres many tutorials for rooting/flashing roms on here...pretty basic stuff....Good luck
chizler said:
i see that most of the roms for our phones are this version 1.54.401.5, and my phone is still running 1.12.502.18.
i not new to rooting or changing roms, just new to htc which is a little more in depth than samsung was. so my question is should i up date to this version or should i wait, and if i need to update where can i find that version and intructions to install.
i am rooted, unlocked and s-off right now. thanks in advance.
Click to expand...
Click to collapse
Thanks I didn't realize that was for the European version, think I'll pass on that and stick to the carrier roms that are available.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
I have a htc one m8 AT&T version. It is completely stock but i plan to unlock and flash soon. my question is a firmware based question. My phone has 4.4.2 kitkat and software version 1.58.502.1 (firmware version?). Which rom will work with my firmware version?
This one : http://forum.xda-developers.com/showthread.php?t=2749088
Or this one : http://forum.xda-developers.com/showthread.php?t=2694917l
Thanks for everyone's help!!!
Neither link is going to help you. You want a software 1.xx based ROM, but you will see the first thread you linked just goes to the 2nd link (if you look under the "Download section" it refers you to the main thread, which only has links to 2.xx based ARHD).
Either you will need to find an older version of ARHD (either previously posted, or ask for it) or update your firmware. Really, the 2nd option is preferable as you will find that most ROMs have moved on and require the newer firmware.
I am going to flash the firmware on my m8 to upgrade to 4.4.4 ARHD but I am still unsure of how to identify the proper firmware zip . Could someone provide some guidance? Attached are some images from the recovery. I'm not sure what numbers I need to match with the firmware zip. And I can't find how to view what numbers are in the zip. Any advice is very much appreciated.
hboot 3.16 corresponds to firmware that deployed with 1.x software. Its what many folks call "1.x firmware" for lack of any better title, since firmware doesn't really have a "number".
If you want to update to the latest ARHD, you need "3.x firmware". Any firmware with number 3.xx.xx will allow the phone to boot normally, and with working WiFi. The numbers after the 3 are just carrier/region specific versions.
But for the AT&T network, you are probably best off flashing the 3.28.1540 firmware posted on WNC's ROM here: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Thanks a lot!
redpoint73 said:
hboot 3.16 corresponds to firmware that deployed with 1.x software. Its what many folks call "1.x firmware" for lack of any better title, since firmware doesn't really have a "number".
If you want to update to the latest ARHD, you need "3.x firmware". Any firmware with number 3.xx.xx will allow the phone to boot normally, and with working WiFi. The numbers after the 3 are just carrier/region specific versions.
But for the AT&T network, you are probably best off flashing the 3.28.1540 firmware posted on WNC's ROM here: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Click to expand...
Click to collapse
So even if you just want the new Firmware, you have to do everything in that thread? I'm asking because it shows installing a ROM then doing stuff with Xposed, which I assume will be undone when the ROM changes
badbwoydes said:
So even if you just want the new Firmware, you have to do everything in that thread? I'm asking because it shows installing a ROM then doing stuff with Xposed, which I assume will be undone when the ROM changes
Click to expand...
Click to collapse
No, you just need to perform the steps listed under "Updating firmware" numbered 1-8. And also skip the very last step (Step 8, Substep 3).
The rest is if you want to run the modified Dev Ed ROM, as you have somewhat already figured out. But honestly, if you are on AT&T's network, I would consider the ROM anyway. Many folks (including myself) get various network errors running "international" based custom ROMs; which the debloated Dev Ed ROM does not suffer from.