Good evening all, my apologies in advance if i am asking a stupid or already answered question,
i have looked through this forum and many others along side through google and i am unable to find a solution or solved post in regards to fixing this phone.
I recently purchased a second hand s2 from ebay, not the best move but it was cheap, and i was in need of a phone.
the phone came with damaged screen, so i ordered a replacement and thought no more.
after receiving the screen i replaced it fitted it and was in the belief that the phone would be up and running, no no no this is not the case...
upon fitting the screen i found that the phone would lag as such, as if two fingers were placed on the screen, with motions being very sticky also requiring a large amount of force to respond when trying to use it. normal androids will switch between home screens effortlessly and relatively fluid.
Seeing this issue i thought a simple firmware upgrade would suffice and id have a usable phone. upon upgrading via kies i was unable to install the MTP drivers and so switched to the program odin for the update.
i downloaded what i believe to be uk firmware from samsung-updates,
firmware I9100XWMS2_I9100BULS3_I9100VODLSF_HOME
which has also caused the phone to boot in what looks to be spanish. although e3 and cwm show in english.
after the update the phone seems to be in a soft bricked state, the phone will repsond to input from soft keys, go into recovery and download mode accept all firmwares i have tried 9 times out of 10. but when reaching the android home screen is completely frozen, no response from touch or soft keys, except only for volume up and power to reset the device.
thinking the recently purchased LCD was the culprit i have sent it back and had a replacement, still the issue is present.
I have tried many different roms/kernels in the hope to solve this problem and i am at my wits end!
any help in bringing this thing back to life would be of great help as i am without a phone, or enough money to replace it again...
thanks for any response
cheers Ansell2k12
Hopper8's 'Odin troubleshooting' thread stickied in the General section; in particular flashing the 3 part firmware (this will wipe your phone). Also try everything in that thread for as long as you have the patience for it. These cases tend to be fixed by perseverance, or not at all. There's no easy fix. It's either a hardware issue(s), NAND corruption, or something really obvious being missed here. If it's the latter, hopefully the stuff in Hopper's thread helps you fix it. If it's either of the other two, I'd be cutting my losses.
Ansell2k12 said:
Good evening all, my apologies in advance if i am asking a stupid or already answered question,
i have looked through this forum and many others along side through google and i am unable to find a solution or solved post in regards to fixing this phone.
I recently purchased a second hand s2 from ebay, not the best move but it was cheap, and i was in need of a phone.
the phone came with damaged screen, so i ordered a replacement and thought no more.
after receiving the screen i replaced it fitted it and was in the belief that the phone would be up and running, no no no this is not the case...
upon fitting the screen i found that the phone would lag as such, as if two fingers were placed on the screen, with motions being very sticky also requiring a large amount of force to respond when trying to use it. normal androids will switch between home screens effortlessly and relatively fluid.
Seeing this issue i thought a simple firmware upgrade would suffice and id have a usable phone. upon upgrading via kies i was unable to install the MTP drivers and so switched to the program odin for the update.
i downloaded what i believe to be uk firmware from samsung-updates,
firmware I9100XWMS2_I9100BULS3_I9100VODLSF_HOME
which has also caused the phone to boot in what looks to be spanish. although e3 and cwm show in english.
after the update the phone seems to be in a soft bricked state, the phone will repsond to input from soft keys, go into recovery and download mode accept all firmwares i have tried 9 times out of 10. but when reaching the android home screen is completely frozen, no response from touch or soft keys, except only for volume up and power to reset the device.
thinking the recently purchased LCD was the culprit i have sent it back and had a replacement, still the issue is present.
I have tried many different roms/kernels in the hope to solve this problem and i am at my wits end!
any help in bringing this thing back to life would be of great help as i am without a phone, or enough money to replace it again...
thanks for any response
cheers Ansell2k12
Click to expand...
Click to collapse
lcd may be the culprit but also the firmware is crashed flash it again properly after a factory reset from e3
Progress...but not as id hoped...
first off thanks to you mistahbungle & bhavstech,
unfortunately im only little further forward.
After the flash using 3 part file firmware the phone is now running in English language on an updated firmware, but still appears to be frozen/ crashed.
updates on appearance, maybe its still salvageable?
Clock now updates after reboot
English language
charge icon does not change when unplugging/replugging charger/data cable but is recognized by the PC - MTP is now installing, but requires reboot, after reboot of the PC, MTP installs again and request reboot again... and continues to do so.
clock doesn't update at home screen, again appears to be frozen/crashed
still no response to touch, touch buttons or soft keys - only phone rest volume up and power.
when phone is at samsung splash screen i get notification of voice mails/texts on the phone.
Thanks again Ansell2k12
Ansell2k12 said:
first off thanks to you mistahbungle & bhavstech,
unfortunately im only little further forward.
After the flash using 3 part file firmware the phone is now running in English language on an updated firmware, but still appears to be frozen/ crashed.
updates on appearance, maybe its still salvageable?
Clock now updates after reboot
English language
charge icon does not change when unplugging/replugging charger/data cable but is recognized by the PC - MTP is now installing, but requires reboot, after reboot of the PC, MTP installs again and request reboot again... and continues to do so.
clock doesn't update at home screen, again appears to be frozen/crashed
still no response to touch, touch buttons or soft keys - only phone rest volume up and power.
when phone is at samsung splash screen i get notification of voice mails/texts on the phone.
Thanks again Ansell2k12
Click to expand...
Click to collapse
Your issue of a semi frozen state is very familiar to me but the reasons can be many and one of those are the /sdcard partition not mounting properly and likewise it could also be a failure of the other major partitions but if the device booted and made it to the lockscreen then you may have some hope, first if you have a external card plugged try booting without it, if the issues repeat try swapping the ext card with the internal /sdcard by flashing a modified vold.fstab file for your firmware which swaps the partitions effectively making the device mount the ext card as the /sdcard partition. I am expecting you have gone through the default troubleshooting methods like a clean flash etc.
Sent from my GT-I9100 using Tapatalk
king_below_my_lord said:
Your issue of a semi frozen state is very familiar to me but the reasons can be many and one of those are the /sdcard partition not mounting properly and likewise it could also be a failure of the other major partitions but if the device booted and made it to the lockscreen then you may have some hope, first if you have a external card plugged try booting without it, if the issues repeat try swapping the ext card with the internal /sdcard by flashing a modified vold.fstab file for your firmware which swaps the partitions effectively making the device mount the ext card as the /sdcard partition. I am expecting you have gone through the default troubleshooting methods like a clean flash etc.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Yes i have done multiple flashes, tried another sd card as the original was unreadable by the phone but picked up the second faultlessly, although flashing a custom firmware failed when trying to load in cwm.
as for a modified vold.fstab file,this is new to me. Could i ask how its modified or where i would get the file? im guessing id use odin to flash it to the device?
thanks for the response
Ansell2k12
Ansell2k12 said:
Yes i have done multiple flashes, tried another sd card as the original was unreadable by the phone but picked up the second faultlessly, although flashing a custom firmware failed when trying to load in cwm.
as for a modified vold.fstab file,this is new to me. Could i ask how its modified or where i would get the file? im guessing id use odin to flash it to the device?
thanks for the response
Ansell2k12
Click to expand...
Click to collapse
There are some threads in which I myself detailed about swapping memory its done via a custom recovery and not using Odin.
Sent from my GT-I9100 using Tapatalk
??
king_below_my_lord said:
There are some threads in which I myself detailed about swapping memory its done via a custom recovery and not using Odin.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
any chance you could point n the right direction?
i have had a look at the stuff to edit vold, and it seems i am unable to do so as my phone isnt usable once booted
cheers Ansell2k12
Phone has gone in the bin cheers guys, thanks for the help
....
You could easily flash a edited vold.fstab file by generating a flashable zip file. That's why I said via recovery or if you are clever enough you can easily use recovery flashable Aroma file manager to overwrite the file.
Sent from my GT-I9100 using Tapatalk
Related
Hello Everyone, it's just sad that my first post on this forum had to be a frustrating one. First of all I would like to start off with a few general points that you guys should know before (commenting or raging at me):
1. My HTC legend was only purchased 3 months ago.
2. I HAVE looked around the forum for answers but I cannot seem to find a suitable solution.
3. My phone has already been rooted.
4. This problem has not occurred before.
5. I am in desperate need of help...
Anyway, I've recently rooted my HTC Legend (like 3 days ago) using this method http://forum.xda-developers.com/showthread.php?t=1223950&page=3 . Everything worked well and I was impressed with how smooth everything was going (flashed cyanogen mod 7 and OC'ed). However only just recently (like 3 hours ago) I connected my phone via the USB cord (provided by the phone itself) and the usual connection status where we can choose (Charge only, disk drive, sync etc) was not coming up. I pulled down the notification bar and nothing was there. Only the USB DEBUGGING sign was there. I tried rebooting my PC and my phone a couple of times but the connection status is still not coming up . I have also tried turning off and on USB debugging mode, re installing/updating SDK and HTC sync (but I doubt that's the problem because I could view the connection status before I downloaded SDK). For some reason there is no "Connection PC" thing that I was pretty sure the stock HTC legend had but I don't know if Cyanogen mod 7 removed that or something.
I went across this forum and tried many of the threads that displayed a similar problem (most were unanswered..). I hope that my USB is not bricked because I don't want to go through the tedious process of unrooting my phone and waiting for my phone from repairs. PLEASE CAN ANYONE HELP ME?!
If it would help: my pc can detect the phone but I cannot change to hard drive mode because the status isn't showing..... Damn this is annoying
Sent from my Legend using xda premium
Anyone?
Sent from my Legend using xda premium
With CM7, or any Android phone using a stock ROM, you have to select disk drive from the notification bar. With that said, in the case that that won't appear, have you tried changing ROMs?
There's also a way to nudge disk drive into working without changing ROMs, and I doubt it'll work, but it's always worth trying.
Reboot into CWM and mount the SD from there. That'll hopefully get 'er going.
Before I say anything, thanks for replying
Okay so what you're suggesting is what most people have been saying about this issue. The problem is that I don't know how to flash a different rom without using the computer
So of you wouldn't mind can you explain in clear (to the best of your abilities lol) how to go about that step? Sorry, but this is my first smartphone and I'm a noob this clockwork recovery thingy. Sigh, the weird thing is cm 7 worked perfectly for a few days (till I oced it).
Cheers
And how do you reboot to CMW? Is that recovery mode, cause if it is I can't do anything once it goes to that red triangle with exclamation mark thingy.
PS: And just in case I have resolve to flashing a new rom, which one do you recommend?
1st of all google that red triangle with exlamation mark thingie. Use these exact words... you'll see, it's amazing...
Sent from my HTC Legend
Don't mind it when people don't reply to your thread. It's a problem with the Legend not being as highly regarded this far into a smartphone's life.
When you get to the screen with the Android device and red triangular exclamatory point, you've reached the first step into booting into recovery. From rooting, an update.zip file should've remained on your SD card. If not, use it from ROM Manager. From that screen, simply press VOLUP + Power to reach HTC's recovery. From there, apply the update.zip from the root of your SD (it'll do it automatically), and you'll be booted into CWM.
Another method, and useful if you already don't have a different ROM loaded onto your external storage, would be to use ROM Manager: https://market.android.com/details?id=com.koushikdutta.rommanager&feature=search_result
From your phone, download a different ROM like you would on your computer, it's a smartphone after all! Leave the rest to the app. It will not only keep ClockworkMod Recovery up to date, but also provides a more simple interface to access basic recovery functions.
First of all I already have rom manager installed because it came with the CM 7 rom after I flashed it. What I don't understand is what update.zip you are talking about because I have one already on the root of my sd card (are you talking about that one). And do I need to do a nandroid back up before doing this procedure? And how do I mount the sd card from CMW lol.. soz FOR the noob questions.
EDIT: I just went to CM Recovery and mounted it onto my PC and pressed one of the options that says "mounts and storage" but when I do, all that happens is that the screen turns into the weird Hat logo with a dark background screen and nothing happens (I can't access the mass storage still). I pressed home which brought me back to my original CMW recovery page and I pretty much tried all of the options and it does the same thing WUT THE HECK! I don't know if its the version of my CMW (v5.0.2.0) or if its something that I'm doing wrong......
EDIT2: OMFG I was freaken pressing the power button to choose my options when I should have been pressing the scrolls button LOL *awkies*. Anyways, USB storage now shows up but what do I do now lol? Do I just reboot and the Mass Storage works again or do I have to reflash it (is it the same steps as flashing a new rom or are the steps different now?). Either way I'm glad that the USB storage still works thanks man I would have given you like a thousand likes or something but can only do it once lol.
Well problem fixed, just reflashed my Cm 7 rom and the USB storage is up and running again Thanks Asovse!
PS: MERRY CHRISTMAS TO EVERYONE READING THIS POST
Sent from my Legend using xda premium
Glad I could help!
Happy holidays, mate!
Hello everyone,
As this is my first post, i'd like to apologise in advance if this issue i'm about to detail has been posted before, but after about a month's worth of trial and inevitable error, reading everything i could find and following every walkthrough i've come across to the t...i'm at wit's end here.
So, i've got a Galaxy SII GT i9100, standard euro version i suppose, my provider is Vodafone Romania (wretched buggers the lot of 'em).
My troubles had started ever since the update from 2.3 with which the phone had arrived, to 4.0.3. I made the update through my home wifi, and i'm guessing the software was provided by either Google, Samsung or Vodafone Ro.
In any case, 4.0.3 was a lot more sluggish and badly calibrated in terms of touch responses and video lag while streaming.
About a month ago i got another notification to update to 4.0.4. This update worked fine for about 20 minutes till the thing decided to freeze up completely, and not turn off from the power button held down a while.
After i had removed the battery and turned it back on, i simply got the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Naturally Kies is a steaming pile and recovery fails every time with a message composed only of empty squares instead of text, i'm guessing it's because i lack a certain language pack, but the only option is "OK".
So i turned to Odin, when that failed, instead of wiping the counter before sending it into the warranty, i did not. so they voided my warranty because it seems Odin is "unauthorized".
Multiple tries and failures later, quite a few attempts by other people that know more about this than myself...some have said i've got corrupt flash memory while other say "NAND rw corruption".
I'm a rather experienced pc builder...but this seriously stumps me.
I've also tried the walkthrough here on XDA with the same results.
So any new input would be much appreciated...be it through skype or another medium.
can you enter the download mode, if yes then try flashing stock firmware which comes with .PIT file (using odin)......may be that will help
try this thread as well http://forum.xda-developers.com/showthread.php?t=1457458
RazorwireClouds said:
Hello everyone,
As this is my first post, i'd like to apologise in advance if this issue i'm about to detail has been posted before, but after about a month's worth of trial and inevitable error, reading everything i could find and following every walkthrough i've come across to the t...i'm at wit's end here.
So, i've got a Galaxy SII GT i9100, standard euro version i suppose, my provider is Vodafone Romania (wretched buggers the lot of 'em).
My troubles had started ever since the update from 2.3 with which the phone had arrived, to 4.0.3. I made the update through my home wifi, and i'm guessing the software was provided by either Google, Samsung or Vodafone Ro.
In any case, 4.0.3 was a lot more sluggish and badly calibrated in terms of touch responses and video lag while streaming.
About a month ago i got another notification to update to 4.0.4. This update worked fine for about 20 minutes till the thing decided to freeze up completely, and not turn off from the power button held down a while.
After i had removed the battery and turned it back on, i simply got the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Naturally Kies is a steaming pile and recovery fails every time with a message composed only of empty squares instead of text, i'm guessing it's because i lack a certain language pack, but the only option is "OK".
So i turned to Odin, when that failed, instead of wiping the counter before sending it into the warranty, i did not. so they voided my warranty because it seems Odin is "unauthorized".
Multiple tries and failures later, quite a few attempts by other people that know more about this than myself...some have said i've got corrupt flash memory while other say "NAND rw corruption".
I've also tried the walkthrough here on XDA with the same results.
So any new input would be much appreciated...be it through skype or another medium.
Click to expand...
Click to collapse
sorry i forgot to mention that i can enter Download mode using Vol. down + home + power, BUT...i can't enter recovery mode or whatever it's called with Vol. up + home + power...that button combo only starts the phone with the same old error message.
also, i've tried this walkthrough
as far as i know if you can enter into download mode, your phone is not dead...........................i don't know much about android development but i am sure that your phone can be revived...........keep searching the forum and try contacting some of the sgs2 developers they might be able to help you
cheers
RazorwireClouds said:
sorry i forgot to mention that i can enter Download mode using Vol. down + home + power, BUT...i can't enter recovery mode or whatever it's called with Vol. up + home + power...that button combo only starts the phone with the same old error message.
also, i've tried this walkthrough
Click to expand...
Click to collapse
pretty much what i'm thinking as well, there should be a way to restore it without resorting to cannibalism and taking a broken phone's mobo.
but i have been searching and being new to these forums i've no clue who to contact, but anyways, thanks for the reply sir. my thanks
bumpdonkey.
Come on,are you trying different things like disabling kies/USB cables/ports/different PC.
Have you tired flashing the stock Rom through Odin? You can find it at sammobile.com.
Sent from my SGH-I727 using xda app-developers app
as i've stated in the first post, i've tried almost everything. this includes flashing a series of different roms, kernels, pits etc.
as well as trying it with kies uninstalled, and since it's been attempted by other people, i'm guessing it's superfluous to try it on another PC than my own because others have already done so with it. and the cable is just a cable.
i have the same problem and i still searching
when i try to mount the data partition it fail
i tried all things but still no solution
come on guys help us to revive our sgs2
so far, the most i've accomplished was bringing it from the error message to the boot screen where it remains forever...by flashing the bootroom.
but if i tick "nand erase all" it fails to do anything.
No bumping
Do not bump this thread. The answer will come because someone knows it, not because it's bumped every few hours.
which reatmne
sorry about that, i'll cut the bumping then...i'm just...beyond frustrated at this point...it's been a brick for about a month now...nobody seems to know how to fix the blasted thing
Maybe...
I had once got stuck.
If you could get to the recovery, i think you can try wipe data, wipe data, wipe data....................
Then flash stock rom, or those you think is reliable.
wipe and flash. wipe and flash.
If you can't, use ODIN....... the only way
flash and flash the stock rom or any others.............
if it works, there you are.
Hope it works!!
you may wanna read the whole topic before replying, just saying
Your phone's obviously stuffed and only one of two (but 95% likely only one) things is going to fix it (nothing anyone here can suggest will).
I think you know what they both are. Continuing to post to this thread is simply delaying getting your phone fixed or getting another phone.
RazorwireClouds said:
you may wanna read the whole topic before replying, just saying
Click to expand...
Click to collapse
Exactly pal.Surprised he didnt say "if only you could boot up the phone you wouldnt need to get it repaired"......lol
MistahBungle said:
Your phone's obviously stuffed and only one of two (but 95% likely only one) things is going to fix it (nothing anyone here can suggest will).
I think you know what they both are. Continuing to post to this thread is simply delaying getting your phone fixed or getting another phone.
Click to expand...
Click to collapse
if i may ask what are thee two things which are going to fix the phone cuz mein is in the same situation thanks
I'm stuck in a similar position I'm stuck at galaxy s2 boot screen can get to download mode but not recovery I havnt tryed Odin yet only because I don't know what I'm.doing with Odin could somebody direct me on where to get the right files n stuff for Odin please I would be really gratfull thanks
Sent from my HTC Sensation XL with Beats Audio X315e using xda app-developers app
Google Odin 3, use the 1.85 version. Get the stock Rom from sammobile.com for your device. Unzip Odin and then run it. In PDA browes to the stock Rom. Make sure only auto re boot and F. Reset are checked in odin. Then hit start. Check the stickies for more details. See vincom's in the development forum.
Sent from my SGH-I727 using xda app-developers app
Cheers mate am all sorted now bk rooted with the rom I wanted lol
Sent from my GT-I9100 using xda premium
Hey all, before I say my problem, firstly I have no idea if this is the right section in the forums so apologies in advance, secondly, I have held out for 3 days trying to work out various issues before I posted. I probably did just miss one thing or misread another but no matter how much I look, no idea what as new to this. Thanks in advance for your help.
Basically, wanted to flash some custom firmware to my phone, I have been having many issues with backing up on Kies, seems to be something related to my USB's and my computer, it keeps failing during the backing up of programs. I ended up giving up on this, made a titanium pro back up of System files and of programs, also made a Nandroid backup, both on my internal phone memory I believe. Have root access, installed busy box and such, backed up some other stuff using EFS Pro, now I am completely confused, I have followed a few guides dotted around the internet, tried to install some custom firmware, it was Carbon Rom 4.2 I believe. I went into the CMW menu, wiped data/factory reset, wiped partition cache, and wiped dalvik cache, installed the rom from my internal phone memory, as it would not find it on the memory card when I tried, and now after two attempts of it seemingly doing it, on rebooting the phone, I go back to the Samsung firmware.
I have tried to read up as much as I can but obviously I am missing something here and no amount of guides or google searches have hinted at my problem, could anyone help? I know people asking constantly for information on how to put on custom firmware will be irritating, but I have genuinely taken this as far as I can alone Cheers
Now after formating something under mount/system, my phone is stuck on the logo screen, reinstalling the ROM does not work either, no idea what to do now
reflash rom, wipe data and voila.
Hey, thanks for the reply. By reflash rom, which way do you mean, am pretty confused still. The rom I download basically bricked my phone, I don't know why, I think to recover it I use ODIN and get my stock software, so is that what you mean? Or can I somehow use my Nandroid back up..?
deancolt45 said:
Hey, thanks for the reply. By reflash rom, which way do you mean, am pretty confused still. The rom I download basically bricked my phone, I don't know why, I think to recover it I use ODIN and get my stock software, so is that what you mean? Or can I somehow use my Nandroid back up..?
Click to expand...
Click to collapse
If you have a Nandroid restore that or flash your original firmware via Odin .
Never restore system files after a firmware change with TB .
jje
Ok here is the situation now, I have made things 100 times worse, I possibly should not of been doing it this late... I followed guides exactly though and there is definitely something not working right with this phone, I just don't know what, all I know is its very temperamental with connecting to computers and will fail doing the custom firmware flashes half the time, no matter what I use, even using the stock ROM i got from samimobile has caused many problems. It might be me, I don't know, but in my frustration followed some advice on a forum and I think I formatted the mount/system. SO obviously I lost both my back up's. My fault and can live with that, phone was bricked and had to do that to get past it I think..
But now no matter what kernel I use and have tried quite a few including my original one, I am unable to connect to my home wifi. It definitely is not the wifi, it worked just fine before I flashed the phone and has been working with it for 4 months, now whenever I set up the phone its constantly stuck in this obtaining network ip infinite loop. No fixes I have used have helped at all so far Sorry to keep asking stuff, I am just literally at the end of my tether, was up until 7am messing with it to no avail.
Just to reiterate a point, the reason I wanted custom firmware was because the phone was crashing randomly and just dying on me and also the speaker had lost like 90% of the volume when I wanted to play music, also it would not connect to my computer with ease, now obviously before I did anything it had issues. So that is why I feel something might be wrong, not saying I did not break anything myself, just the process of flashing the firmware has been pretty straight forward once I did it a couple of times, it has just been failing and bricking every other time, so I am not sure what the problem actually is, did I miss a step, did I mess it up? If not what has. Please helps guys. Regards.
I formatted the mount/system. SO obviously I lost both my back up's
Click to expand...
Click to collapse
formatting system wouldn't touch your backups
deancolt45 said:
Just to reiterate a point, the reason I wanted custom firmware was because the phone was crashing randomly and just dying on me and also the speaker had lost like 90% of the volume when I wanted to play music, also it would not connect to my computer with ease, now obviously before I did anything it had issues. So that is why I feel something might be wrong, not saying I did not break anything myself, just the process of flashing the firmware has been pretty straight forward once I did it a couple of times, it has just been failing and bricking every other time, so I am not sure what the problem actually is, did I miss a step, did I mess it up? If not what has. Please helps guys. Regards.
Click to expand...
Click to collapse
Usual reply if you did not know what and why and had never bothered to read the faqs and guides before flashing .Then its nearly always user error .
Best take it to a service centre and pay for a repair .
jje
edinghn are
Close thread please
Found out something really handy
Hi guys,
TheGS3 has 1 huge trick when u got stuck in firmware, CSC, etc.
Especially when u used some super usefull toolkit (like me)
I used the Galaxy S3 Toolkit, option4 (ALL in ONE) just push enter 2 times
1 to start and the last one to exit...
Got all the issues i read on hundreds of pages searching for the solution.
Accidentialy i found this morning (its 4:45am right now and busy with it since 15:00)
Start Kies, connect GS3 with USB kabel and when it says not connected take out USB
Dont plug in USB for a while...
In KIES go to Tools and irmware upgrade.. Remember, DONT plug in USB
It will ask u for your model nr which is printed on sticker in baterycover
Confirm and it will ask u S / N' which is printed on same sticker
It will start downloading firmware and u will be guided through update progress
Good Luck to y'all.. Time to go to bed.......
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Yeah I just did too :/ I installed chainfire 3D and now it stays at the Verizon loading screen. It doesn't shut off, only reboots to this screen. Safe mode doesn't work. I'm hoping there is a way to fastboot, factory restore, etc. via USB. But I think I'm SOL
I just went up to the Verizon store and play dumb I was able to get mine replaced
Sent from my HTCONE using Tapatalk 2
I figured as much. I talked to someone over the phone and they said to bring it in for a replacement. So I'm going in tomorrow for a new one. Lesson learned haha
Sent from my XT907 using Tapatalk
Really hoping someone has came out with a unbrick/really BootLoop of Doom...
So I know a little about android and learn quick and there is very little information on the verizon ellipsis 7. Just so happens I bought one from a side shop and figured out Framaroot will easily root this device. Well you can guess what happen from there. All was going well until i rebooted with rom toolbox pro to change the font format for the second time. Now ever since it hasn't made it past the verizon screen and i cant take it back. Is there any possible way at all of somehow getting a custom recovery on this thing? Or even better a unbrick/bootloop? Oh and I CAN get it to go into stock recovery. Tried the Clear eMMC and Safe Mode but no luck.
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
wonton9224 said:
Im in the same situation, I'm not able to boot into safe mode and clearing the emmc (formatting /data) doesn't seem to help either. I believe /data is just the user saved data, system data remains the same and is still corrupted. I had rooted, installed xposed framework and a few modules, rebooted fine the first time, but when I went to go change a setting within Ultimate Dynamic Navbar to make the stock navbar hide or not to hide, the script it used killed the tablet and now my wife's valentines day present is stuck in a bootloop. I'm going to try and take it back to verizon tomorrow after work, hopefully I can get yet another free tablet from big red... rvajuggalo said he was able to get it replaced right away even though it was rooted, anyone think I'll be fine taking it back as well? Or should I just wait til someone comes out with a fix for this issue?
Click to expand...
Click to collapse
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Elipsis Bootloop Help!
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If anyone has a clean copy of the system or firmware directories can you please share with me? --- Also if anyone knows how to get into the stock recovery without android debugging please explain? On a final note if anyone has a custom recovery that they could share that would be amazing as well. I'm in a bootloop and have been stuck in it for a couple weeks. Any assistance would be most appreciated.
dduncan55330 said:
I was able to get a new one and mine was stuck in a boot loop
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
wonton9224 said:
Thanks, that confirms it for me, I'll definitely take it back tonight, hopefully it's in stock and not back-ordered
Click to expand...
Click to collapse
VZW made me send my ellipsis to them for the screen issue after update, i unrooted it before sending it. They were able to fix it somehow because they sent mine right back fixed(i wrote down the serial)
mtk_droidroot_backup_Verizonellipses...HERE
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
Do you think I could get a copy of that backup file?
DYI
rvajuggalo said:
I am assuming no one has bricked this device yet but I believe I just did I am rooted and stuck at a welcome screen if anybody has a solution please help! if not I'm going to the store Saturday and telling them a silly lie
Click to expand...
Click to collapse
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
A new development, possibly.
dereksilvers said:
Backed up my QMV7B before i Bricked it, now ive got two mtk paperweights pm me ,I'll link you to a backup on my drive. also bookending my desk is a lovely alcatel oone touch fierce 7024n which proudly boasts "ERROR 101 This phone has been flashed with unauthorized firmware and has been locked." niether of these will respond to any flash utility ive been able to conjure
Maybe you can use it. I need some hands on guidance flashing these. way too many tutos,way too many fllashtools, way too many drivers, usb cables, homemade serial cables, linux distros ,windows xp,7,8,8.1, hours, days,weeks,....... you get the picture.
apt-get ME_A_STRAIGHT_JACKET!
I know it can be done, i would like to learn from someone who ddoes it. its taking way to long to teach myself. and i still kinda like my wife but i doubt shell take much more.
#BRICKED --help
Click to expand...
Click to collapse
After making edits in system files I broke my QMV7B. Hangs on powered by android logo. In a panic, I wiped emmc from factory more (Chinese).. This reset ADB keys, and complicated matters further. After some digging I may have caught a break... I have figured out a way to stop and suspend the tablet in it's pre boot, or preloader, state. While suspended, it maintains COM3 connection with SPFT, and does not power cycle on and off. It also successfully installs it's onboard Preloader driver without error. Problem is that I need help attempting flash (for best chances)...
needing stock 4.4.4 fit the qmv7, or possibly advice on stock recover if possible.. I have successfully flased devices with Odin before, and have rooted almost every I have had.. I just want the best chance for success, and not to full brick the tab.. this could also be a solution for newer devices as well, but would like to for a good developer to speak with me before I post my findings. I will also post if I get the stock room compatible for flashing with SP Flash tool.. thanks guys..
Help
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
I really need the un-rooted qmv7a stock rom, if any one could provide, that would be fan-freaking-tabulous lol...
no, for real i need the stock rom. I'd really appreciate it.
BTW
if you wanna get clean root on this device, i suggest this- http://forum.xda-developers.com/showthread.php?t=2748169
(has nothing to do with my need for a clean start, that was my own carelessness...)
Bondaddict said:
Please post specifics on how you achieved suspending in Preloader mode. That would help me alot.
Click to expand...
Click to collapse
Needle point method at USB port
ellipsis 7
I root my ellipsis 7 and install clockworkmod recovery after reboot in recovery struck on boot loop and not even access on recovery mode plz help
anybody still own one of these? lol
---------- Post added at 04:59 AM ---------- Previous post was at 04:41 AM ----------
LoveAboveAll said:
If you're willing to open the back plate. (Back plate just pulls off. I'd suggest opening the sim/sd card slot and using that to pull it off. You need to disconnect the battery wait a few seconds, reconnect and then boot into recovery.
1. Black plate removal
2. Disconnect battery
3. Wait a few seconds
4. Reconnect battery
5. Press and hold Power and Down volume button until you see "Powered by Android"
6. Release the power button continue to hold down volume
7. Once in Factory recovery mode choose your best option
(I just factory reset it)
:good:
-love
Click to expand...
Click to collapse
Hey man it's been 5years & I just wanna say thank you for posting this as I just managed to get into factory mode thanks to your comment xD. factory mode didn't help me a bit but maybe when I get to a PC I can use mtk tools to get a shell or something from there. Thanks again and if anybody has anything more than what's on here about this tablet please contact me as I feel like the last human on Earth with one ????
Yeh
I have one??
And Reading all topics about rooting this tablet...i'm afraid to do that?
Hey, so I was trying to flash my friend's s3, and apparently, I did something wrong which got me stuck up at odin mode.
Initially, I could hold the vol up + home + power button to go to recovery, but now, even that won't work as it would just show me
Samsung's logo and a red exclamation mark on top left corner.
I've downloaded the firmware stock and tried to flash it using odin however it just won't work.
It says "NAND Write Start!!!" and it just stops there (stuck forever). It should (as I know it) show a progress bar on my android and
on it's interface to tell how much it has been done, but as soon as I start, the progress bar instantly fills up (on my android, the blue line)
and its just stuck there.
I've tried to take out the battery, clear cache/reset factory, take out sd and sim. But it simply won't work.
It's just stuck on "Downloading....do not turn of target!!!"
I cannot even get the flash counter to reset (I don't know how, since I can only open up odin mode)
counter: 4
binary: yes
Currently, I don't even know if it's suppose to be charging or the battery is just draining out.
Region for this phone is Turkey.
Yes I've also unrooted the phone using KingoRoot (previously, when it could go into recovery) but no luck.
Note: I have searched other threads on this forum but I cannot get anywhere around even close to fix my device.
It's soft-bricked (I assume, of course it is).
Any idea how to fix this?
Odin Screenshot (since it's my first post, it won't allow me to post outside links, sigh,):
http: // i.imgur .com/eBVZ3NN . png
^^ Just been stuck there....
Meanwhile on my android, it just shows a full-blue progress bar. And that downloading do not turn of target.
UPDATE:
THE PROBLEM HAS BEEN RESOLVED. I DOWNLOADED A CUSTOM FIRMWARE, (LUCKILY, CLOCKWORK MOD WORKED, JUST HAD TO WAIT AFTER GOING TO RECOVER)
FLASHED IT THROUGH THERE, WAITED FOR IT TO INSTALL, RESTART. BAM.
Did the 'something wrong' include flashing a firmware for another model?
What does the model number in download mode read?
You can try the rescue firmware, search general forum,.
Yeah, wrong firmware I suppose
boomboomer said:
Did the 'something wrong' include flashing a firmware for another model?
What does the model number in download mode read?
You can try the rescue firmware, search general forum,.
Click to expand...
Click to collapse
I was seeing this tutorial on how to install KitKat (4.4.4) on Galaxy S3. I must've made a mistake while trying to do so.
In other words, yes, flashing a firmware for another model.
You have a hard brick, sorry.
Yeah, no.
boomboomer said:
You have a hard brick, sorry.
Click to expand...
Click to collapse
No I don't lol. The problem has been solved anyway.
Im' glad to see you didn't give up on this, and came back to let us know what was wrong
I know this could be seen as off-topic, but the reality of devices becoming bricked isn't really possible luckily, it just takes longer to get around sometimes. If the item is worth fixing, then I always say keep at it, because I've never had an android device stay stuck so far. The only thing that really went nuts and refused to work, were 2 of the Iconia A500 tablets that lost access to their memory - but this is a common hardware fault as the RAM chips break away and need reflowing before you can even format the internal memory (it cant even see the SD cards either because the RAM comes and goes - same idea as plugging/unplugging a USB drive in Windows/Linux - it just doesn't know what to believe lol).
Great forum by the way, there's so much great information on here I get lost reading