Hi!
I installed "U20_nAa-14_2.6.29.6-nAa-14" and "MiniCM7-2.2.1-mimmi" on my phone. The mobile network didn't worked, so I tried closing back the bootloader. I made it with "s1tool relock.exe", and it really closed it back. The instructions I followed while doing it, said that I shouldn't start the phone after doing the relocking and disconnecting it from the computer. Accidentally I switched it on, and now it won't turn on. Only the startup vibration and green led flash. If I connect it to the computer it keeps connecting and deconnecting, I don't know how to open up the bootloader again if it's possible at all.
Is it repairable?
Thank you for your help.
Rodage said:
Hi!
I installed "U20_nAa-14_2.6.29.6-nAa-14" and "MiniCM7-2.2.1-mimmi" on my phone. The mobile network didn't worked, so I tried closing back the bootloader. I made it with "s1tool relock.exe", and it really closed it back. The instructions I followed while doing it, said that I shouldn't start the phone after doing the relocking and disconnecting it from the computer. Accidentally I switched it on, and now it won't turn on. Only the startup vibration and green led flash. If I connect it to the computer it keeps connecting and deconnecting, I don't know how to open up the bootloader again if it's possible at all.
Is it repairable?
Thank you for your help.
Click to expand...
Click to collapse
Flash THIS with flashtool. The download is about 213 MB, although it may say differently when downloading, just wait till it's finished.
It's original Sony Ericsson Firmware and can be flashed on a device with a locked bootloader. Not sure about the version, although it says 2.1.1.A.0.6, it may be older, but i don't have a U20, so I can't check. It should be possible to upgrade it with Sony Update Service if it's an older version. Good luck.
Thank you!
It worked. Can I ask that too, is there a safest way to solve the no network problem?
Rodage said:
Thank you!
It worked. Can I ask that too, is there a safest way to solve the no network problem?
Click to expand...
Click to collapse
Depends on your simlock certificate or how your phone was unlocked from it's original network. There are two or three methods (msm_7227_semc, msm_7227_setool2, and maybe one for omnius too) , just try them and check if you get a signal before you flash any custom firmware. If you don't get a signal, relock it again and try a different method.
Flashtool used to be quite good at figuring out which method worked best, but I don't know if that still supports unlocking 2010 devices. I've got 0.9.13 and there is a BLU (Bootloader UnLock) button.. just try that
I opened it again with msm7227_semc, bacuse the others didn't worked, and installed it again. Now everything is fine, but the home button and the screen lock still not works:/ I think I'll leave it this way, and not risk one more time my network connection.
Thanks for your help.
Rodage said:
I opened it again with msm7227_semc, bacuse the others didn't worked, and installed it again. Now everything is fine, but the home button and the screen lock still not works:/ I think I'll leave it this way, and not risk one more time my network connection.
Thanks for your help.
Click to expand...
Click to collapse
If it's unlocked and the network is still there you can do whatever you want with it There's no need to lock it ever again so you can experiment with kernels and roms all you want.
What was the matter with the home-button and the screenlock? Do the other buttons work and is the screen ok when you slide out the keyboard?
SmG67 said:
If it's unlocked and the network is still there you can do whatever you want with it There's no need to lock it ever again so you can experiment with kernels and roms all you want.
What was the matter with the home-button and the screenlock? Do the other buttons work and is the screen ok when you slide out the keyboard?
Click to expand...
Click to collapse
The other buttons are all fine, and the home looks fine too, just the only way to use it is to turn on the screen with it. Which hasn't got a lock on it, when I push any button, it switches right to the home screen. Turning on lock patterns and others didn't helped. Maybe can I use external applications to substitute the functions?
Rodage said:
The other buttons are all fine, and the home looks fine too, just the only way to use it is to turn on the screen with it. Which hasn't got a lock on it, when I push any button, it switches right to the home screen. Turning on lock patterns and others didn't helped. Maybe can I use external applications to substitute the functions?
Click to expand...
Click to collapse
Hmm, sounds a bit like the ROM doesn't want to go to sleep. Maybe you could reboot into recovery, and wipe data/factory reset, wipe cache and wipe dalvik-cache (from the advanced menu). I'm sure you already did that, but it can't hurt to do it again, and see if that fixes the problem
The phone should enter deep-sleep after about 5 seconds after the screen is turned off, in which case the only way to wake up the screen are the power-button and the home-button. pressing menu or back should keep the phone asleep. If after about 10 or 20 seconds you can still wake up the screen with the back or menu buttons you might want to check if there's an app keeping the phone awake.
Done factory reset and cache wipe already multiple times. Just realized how annoying is the dysfunctional home button, so I tried MiniCM7-2.2.0, MiniCM9-3.0.5 with nAa-11,13,14 and nAa-ics-04. Unfortunatley didn't worked the home button or the screen lock with none of them. At first time, I installed the MiniCM10, but the phone was relatively slow with it and buzzed, so I switched to MiniCM7.
Screen timeout and turnoff delay both set to immediately, but even the camera button can turn on the screen no matter how many time elapses. Can the original MiniCM apps keep it awake? I installed a task killer, but no change.
Rodage said:
Done factory reset and cache wipe already multiple times. Just realized how annoying is the dysfunctional home button, so I tried MiniCM7-2.2.0, MiniCM9-3.0.5 with nAa-11,13,14 and nAa-ics-04. Unfortunatley didn't worked the home button or the screen lock with none of them. At first time, I installed the MiniCM10, but the phone was relatively slow with it and buzzed, so I switched to MiniCM7.
Screen timeout and turnoff delay both set to immediately, but even the camera button can turn on the screen no matter how many time elapses. Can the original MiniCM apps keep it awake? I installed a task killer, but no change.
Click to expand...
Click to collapse
If it happens on all ROMS, maybe it's your home-button keeping the phone alive, as in that it makes continuous contact. Wouldn't know what to do about that though. Does it happen on stock firmware too?
SmG67 said:
If it happens on all ROMS, maybe it's your home-button keeping the phone alive, as in that it makes continuous contact. Wouldn't know what to do about that though. Does it happen on stock firmware too?
Click to expand...
Click to collapse
No, when I restored it with the Sony Update Service everything worked fine on the stock 2.1, and it is still possible to turn on the screen with the home button, but it's other functions are out.
Wow, this time I didn't installed the gapps like it was written in the CM wiki (http://wiki.cyanogenmod.org/w/Install_CM_for_mimmi), both the home button and screen lock works. Why it is written in the "Install CM for mimmi" article if the gapps on the download page is for MiniCM10?
Whatever, shame on me, I should've just take it seriously, and not follow the instructions blindly.:silly:
Thanks for all of your help.:good:
Rodage said:
Wow, this time I didn't installed the gapps like it was written in the CM wiki (http://wiki.cyanogenmod.org/w/Install_CM_for_mimmi), both the home button and screen lock works. Why it is written in the "Install CM for mimmi" article if the gapps on the download page is for MiniCM10?
Whatever, shame on me, I should've just take it seriously, and not follow the instructions blindly.:silly:
Thanks for all of your help.:good:
Click to expand...
Click to collapse
If you get the ROM from the thread in x10minipro development section of this forum, there is a link to the proper gb-gapps
Related
OK, so I successfully installed the ROM. It works fine and all until I actually use openscript on the terminal. For example, I wanted to change CPU frequency. I changed it, quit the terminal, and checked the frequency in system information. It was successful. But After about a minute my screen suddenly locked and here is the current situation. The locking screen works fine (I had the pattern lock), I can even open emergency calls. But when I unlock it, the only thing I see is the notification bar (which works btw, clock, wifi , all the icons are there, I can slide it down and up and so on). Everything else is just black. The buttons work - I can quit the notification tab buy clicking back or home or something like that. But I dont see my home screen, menu, buttons - nothing. I can lock it again, and it works fine again in the lock screen but afterwards same black screen again. Reboot does not work.
So I reinstalled the rom. Immediately after installing changed the frequency and waited for a bit. Everything was fine. I installed all the crap I usually have and kept using the phone. But the next day, I got annoyed by the music player and decided to change it again via the openscript. Same thing happened. And this is where I am stuck right now (actually this is already the third time I have this problem in 3 days and it's my third reinstall of the rom, but the first one also happened after using openscript to change frequency.)
So is there a way to fix this without reinstalling the rom again, cause I've customized the **** out of it and I don't wanna do it again. If no, how can I prevent this in the future?
P.S. If this helps, when rebooting, I hear the sound before the android splash screen which is sometimes skipped and sometimes shown for an unusually short time.
P.P.S. Also, I have the apps2sd flashed.
Any help would be appreciated.
Thanks.
Got same problem
Hi,
Even I got same problem when I tried to change boot animation. Just blank screen.
But i realised it is due to, launcher app is not initiated. So tried a trick which worked indeed
Trick is when u are in a blank screen, click "HOME" button which will pop u up the list of launchers u have. Click One of them though they r not visible
Voilaa!!! Your screen is back
Regards,
Murali
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
I think I have the same issue as you, but in case I don't I will post what I am seeing on my device.
In about the same frequency, say once in every 15 unlocks from phone sleeping, the screen will come on but will be completely unresponsive. Doesn't matter if it is swipe unlock or pin code etc, there is no response to touch input on the screen. In fact, I think the screen is just frozen or the operating system is causing the lock screen to hang.
If the lock screen is hanging, pressing power will:
(a) sometimes make the phone sleep again
(b) make the phone screen kind of glitch/blip and then it takes input again
(c) does nothing and the screen remains on and hung/frozen
Occasionally mashing both the volume key and power key will help fix it, but usually if it is completely stuck I have to do a hard reset (holding HOME+VOL UP+POWER and then selecting reboot from the menu).
Now - I think this could be an app, but not sure.
When I first got the phone, set it up with my Google account etc, it went ahead and downloaded ALL the apps I had installed on my previous phone (HTC Sensation running Android ICS). So if it is an app, it is having issues with this phone, not the OS, imo.
I uninstalled all those automatically downloaded apps, and used the phone for a bit without my normal stuff installed. Then started installing apps singularly.
I think it is either Facebook or Alarm Clock Xtreme. The latter makes more sense given it would be polling the system to find out when to go off, so it is doing more in the background I would expect than Facebook or any other non-system app.
Other apps I have installed/running:
Swiftkey X
3G watchdog
Dolphin Browser HD
ES File Explorer
Winamp (locks without this running or running at all in lock screen mode, so that is not the issue)
Real Calc
Google Drive
Facebook
Alarm Clock Xtreme
It is quite frustrating for a brand new phone to have these issues. Not sure if it is hardware related, and if it is, I want to find out soon so I can take it back to carrier within their 28day device swap RMA period.
Thoughts?
So others may try to help or identify the possible cause / fix .......
What is your firmware version?
Are you rooted, custom ROMs or Mods etc?
Stock ROM,Baseband : XXLE8. Build No :XXALE9.
But my screen responds after i press wake button again. You are right seems to be issue with the app. i will just compare your apps and below are the ones which are common between us.
Facebook
3G watchdog
Dolphin Browser HD --i never use
Google Drive
a fix that worked for me
Steps to the solution that worked for me (so far) were to uninstall:
1. Alarm Clock Extreme (no noticeable result but I wasn't needing that application anyway)
2. I had WIFI Fixer installed because of the problems I experienced with the WIFI connectivity on my Galaxy S3.
I disabled that application and problems seemed to go away for a time, but every so in a while they resurfaced. Much less often than before, though.
I was still stuck with my WIFI problem anyway, so I looked into solutions for that problem and since I could not find a workable solution I uninstalled Wifi Fixer and started tweaking my WIFI settings.
While doing that I noticed that disabling "Network Notification" under the Settings -> WIFI -> Advanced tab fixed both my problems.
Now I can't be 100% sure this solution works for all, but I am pretty sure the application that created the problem was "WIFI Fixer".
It's been more than 4 hours now without the "disabled unlock screen from hell", and I’m very happy.
LOOOL
Actually...
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
This is not a solution, this is a work-around....
It will remove the standby wifi.... My phone was at 0% battery in one night... But actually yes, the phone doesn't hang up when unlocking.
Someone who had replaced the phone could tell me if the problem is solved with a new one ?
calint said:
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
Click to expand...
Click to collapse
Sadly having the same issue! and only sing LG6 and LG8 of the UK firmware was release.. out the box was LG4 if I am not mistaken... have been putting off custom roms due to the fact stock one is so far good..
This fix seems to be working..Thanks! will live with battery drain as data is expensive in SA!
khan.dharvesh said:
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
Click to expand...
Click to collapse
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
It worked!!
douglasurbano said:
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
Click to expand...
Click to collapse
This worked for me!!! Thank you!! I was about to take a hammer to this phone! :good:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
RhavoX said:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
Click to expand...
Click to collapse
Not sure what ROM and kernel you are using, but at a big guess, try reflash another kernel or with less aggressive settings.
Sent from my GT-I9300 using xda premium
hey guys. I have a problem with my s3's lock screen similar to the described. whenever I press the power button to unlock, it takes 2 second for the screen to turn on. Anyone got any ideas on that?
Hello friends.
I just got my Motorolla Atrix 4G and im not abble to unlock it on the unlock screen, the touch just dont works at all there, even the capacitive buttons below not responding. The first day I managed to unlock it somehow after removing the battery, after that the unlock screen was working fine even when I lock the phone so I tough the problem was over and stated to install some basic apps. Like 2 days later the problem was back and now not even removing battery was working, sometimes I get to unlock it but now thats less and less posible. I read that installing an optional unlock screen could do the trick so I installed "Widget Locker" and worked some hours, then the same thing even the Widget Locker unlock screen dosnt respond. Its weird because once I manage to unlock it the touch works perfectly at all so that makes me think its a software/system problem.
Currently I cant unlock it at all, not even removing battery or anything.
The phone its used, I was thinking to bring it to a tech center on here and try root and installing a custom rom?
Thanks in advance for your help guys.
Bump...
Just to add... tried hard reset and didnt worked =/
¿Any sugestion? ¿Should I try an screen change?
Thanks.
BlazeHN said:
Hello friends.
I just got my Motorolla Atrix 4G and im not abble to unlock it on the unlock screen, the touch just dont works at all there, even the capacitive buttons below not responding. The first day I managed to unlock it somehow after removing the battery, after that the unlock screen was working fine even when I lock the phone so I tough the problem was over and stated to install some basic apps. Like 2 days later the problem was back and now not even removing battery was working, sometimes I get to unlock it but now thats less and less posible. I read that installing an optional unlock screen could do the trick so I installed "Widget Locker" and worked some hours, then the same thing even the Widget Locker unlock screen dosnt respond. Its weird because once I manage to unlock it the touch works perfectly at all so that makes me think its a software/system problem.
The phone its used, I dont have access to warranty or anything =/ I was thinking to bring it to a tech center on here and try root and installing a custom rom?
Thanks in advance for your help guys.
Click to expand...
Click to collapse
Does the problem occur when you move the phone into a vertical position (moving the lock screen)?
Try turning the screen off/on by using the power button (but don't turn the phone off) ... does this help?
When you installed a custom rom did you do a full system wipe? (goto 'mounts/storage' and format pre-install, data, system, osh, cache) before
installing rom.
Hello barry, thanks for the answer.
Yes, the problem occours in both horizontal and vertical positions.
If I press the power button the power off dialog appears on screen and im unable to touch the options, holding the power button dont turn the phone off so im forced to remove the battery to turn it off.
I havent installed a custom rom yet. Thats the next step ill be covering. I toke the phone to a tech center place and asked them to install a custom rom (since I cant persoanlly do the root and flash rom proces) They just told me that it didnt fixed it, but when i turn it on i saw the same Moto Blur interface wich make me think they didnt changed the rom at all...
Sadly when puting a SIM and starting the phone the Motorolla interface screen appeared, but... touch wasnt working there neither wich now starts to make me think it is a hardware problem after all... Im not sure anymore and dont know what to do now
Sorry for the long answer and the bad english.
sounds like your digitizer might need replaced, based off of what I read. just out of curiousity, what android version is it?
Stock Android Gingerbread 2.3 with Moto Blur UI
Digitizer? Not Screen then?
EDIT: Ohh nvm, Digitizer = Touchscreen right?
BlazeHN said:
Digitizer? Not Screen then?
EDIT: Ohh nvm, Digitizer = Touchscreen right?
Click to expand...
Click to collapse
Yes. Don't confuse the two, the screen has nothing to do with the digitizer, other than one being on top of the other physically.
So i was just forced to install Lollipop by Sprint. I was having a minor S-Pen issues and Sprints "FIX" was to update me to Android 5.0 Lollipop. Well now I have 500000000 other issue with my phone. Most i can live with, but there are 2 in particular that at driving me absolutely bonkers and I cant fix. I was hoping someone around here would have an idea how to fix it without me having to root, and go back to the previous OS. (The Sprint Root seems a little intimidating and I cant afford to brink my phone even for 20 minutes).
The main issues I am having are regarding the lock screen. I cant get the lock screen to stay open more then 3 or 4 seconds and if I botch my pattern or don't swipe fast enough, the screen will turn itself off. Then I have to turn the screen back on and try and unlock it again. Sometimes the screen even turns off in the middle of trying to unlock it. It is EXTREMELY annoying having to try and unlock my phone 4 or 5 times just to get to the notification screen ...... As for the Notification screen, once i finally am able to get my phone unlocked, then when i try and swipe my notification bar the phone will sometimes turn the screen off as well, then I have to go BACK to trying to unlock the phone and try and do everything faster then 2 jack rabbits banging in order to just get to my notifications. Its become a major problem in that sometimes I just cant get the sequence and speed right for 10 or 15 tries.
Anyone else having these issues or have a fix???
jcohenlv said:
So i was just forced to install Lollipop by Sprint. I was having a minor S-Pen issues and Sprints "FIX" was to update me to Android 5.0 Lollipop. Well now I have 500000000 other issue with my phone. Most i can live with, but there are 2 in particular that at driving me absolutely bonkers and I cant fix. I was hoping someone around here would have an idea how to fix it without me having to root, and go back to the previous OS. (The Sprint Root seems a little intimidating and I cant afford to brink my phone even for 20 minutes).
The main issues I am having are regarding the lock screen. I cant get the lock screen to stay open more then 3 or 4 seconds and if I botch my pattern or don't swipe fast enough, the screen will turn itself off. Then I have to turn the screen back on and try and unlock it again. Sometimes the screen even turns off in the middle of trying to unlock it. It is EXTREMELY annoying having to try and unlock my phone 4 or 5 times just to get to the notification screen ...... As for the Notification screen, once i finally am able to get my phone unlocked, then when i try and swipe my notification bar the phone will sometimes turn the screen off as well, then I have to go BACK to trying to unlock the phone and try and do everything faster then 2 jack rabbits banging in order to just get to my notifications. Its become a major problem in that sometimes I just cant get the sequence and speed right for 10 or 15 tries.
Anyone else having these issues or have a fix???
Click to expand...
Click to collapse
I can't say I had any problems like this. I was running Stock rooted OC5 for a while and had really no problems with it. I didn't have any pattern or pin unlock though, so maybe it would have been different? I would have stayed stock but my Flashaholic took hold and made to start trying out other ROMs.
As for rooting, I have found it very easy to root this phone. I haven't had a problem either using auto-root or flashing superSU.
Factory reset is easy.
w7excursion said:
Factory reset is easy.
Click to expand...
Click to collapse
before a factory reset, you might try doing a wipe of the cache partition.
turn your phone off
press and hold, Volume up + home key + power until you see the blue booting to recovery mode message
wait for recovery mode to display (the menu will show after the green robot)
use the volume rocker to move down to wipe cache partition and press the power button to select it.
now select the yes line and press power
now reboot your phone and see if that helps with the lock screen behavior
good luck
jdelano said:
before a factory reset, you might try doing a wipe of the cache partition.
turn your phone off
press and hold, Volume up + home key + power until you see the blue booting to recovery mode message
wait for recovery mode to display (the menu will show after the green robot)
use the volume rocker to move down to wipe cache partition and press the power button to select it.
now select the yes line and press power
now reboot your phone and see if that helps with the lock screen behavior
good luck
Click to expand...
Click to collapse
This seemed to work so far. Ill keep you posted as I use it more today. Thank you so much
jcohenlv said:
This seemed to work so far. Ill keep you posted as I use it more today. Thank you so much
Click to expand...
Click to collapse
Glad to hear that, I hope it stays that way
You should read more before trying to root
Hello,
I have a very strange problem with my Xperia Z2. After unlocking the display on the device is blank. You can see the brightness, the touch works, because when I swipe my fingers I can hear android sound but there is no picture. I must do "lock - unlock" pattern 3-4 times, sometimes even more to get the display work properly. I tried to fix it by using software repair but it didnt work, and also
factory reset. Its just so iritating, I cant even lock my phone anymore, I try to keep the display on as much as possible if someone trys to call me so I can answer it. Device is currently running on Existenz ROM but the issue started on the stock so I flashed custom rom but it didn't help. So this is probably a hardware problem and if it is, what could be broken ( is it display, GPU,whatever ) or it could be a software problem ? Any help would be appreciated.
Can you see your lockscreen?
iXaidyiu said:
Can you see your lockscreen?
Click to expand...
Click to collapse
No, no the "lock-unlock pattern" is reffered to simply pressing the unlock button on the phone. There is just blank display and light is on as I mentioned but no picture. After pressing button many times the picture finaly comes and then it's normal. It only happens when phone goes to sleep mode or after I lock it.
If your phone reboots can you see the SONY logo and the boot animation as well?
iXaidyiu said:
If your phone reboots can you see the SONY logo and the boot animation as well?
Click to expand...
Click to collapse
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
mby RIP graph.. try flashtools..
YamyYugi said:
mby RIP graph.. try flashtools..
Click to expand...
Click to collapse
It's probably hardware, now it's just a question of repair cost and is it worth it ?
TechCODE said:
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
Click to expand...
Click to collapse
I think this is due to a faulty LCD screen, but the digitalizer seems fine. So maybe you could consult some local repair shops and prove if my hypothesis is correct. But first of all you should try also flashing another kernel (eg elite kernel) first to see if it is a software issue rather than a hardware issue.
Sent from my Sony D6503 using XDA Labs