[Q] Flashed NAB Engineering Bootloader - Stuck in Boot Loop, now what? - Sprint Samsung Galaxy Note 3

Flashed NAB Engineering Bootloader - Stuck in Boot Loop, now what? What is the next step I need to take in order to restore functionality?
My ROM is MJ4.

toviaheli said:
Flashed NAB Engineering Bootloader - Stuck in Boot Loop, now what? What is the next step I need to take in order to restore functionality?
My ROM is MJ4.
Click to expand...
Click to collapse
Nab is kit kat ....bootloader from kit kat won't boot a mj4 rom ...either flash mj4 tar in Odin or flash complete nab tar in Odin .... and read before you do things like this
Sent from my SM-N900P using Xparent BlueTapatalk 2

Epix4G said:
Nab is kit kat ....bootloader from kit kat won't boot a mj4 rom ...either flash mj4 tar in Odin or flash complete nab tar in Odin .... and read before you do things like this
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Well, you do dumb things when you're tired. My intent was to flash KitKat.
What's the best tutorial for flashing using Odin?
Thanks!

http://forum.xda-developers.com/showthread.php?t=2657447
Sent from my SM-N900P using Xparent BlueTapatalk 2

Odin http://forum.xda-developers.com/showthread.php?t=2657447 that and it should get you up and running on Kit Kat then root if you want to be rooted.

All set. Thanks for the assistance!

Glad you got it
Sent from my SM-N900P using Tapatalk

Related

Reset Knox? No Way!

I had previously tripped Knox.
So I updated to NAB using this method: http://forum.xda-developers.com/showthread.php?t=2657447
Everything worked like a charm.
Knox was reset to 0x0!
Did anyone else have this experience?
toviaheli said:
I had previously tripped Knox.
So I updated to NAB using this method: http://forum.xda-developers.com/showthread.php?t=2657447
Everything worked like a charm.
Knox was reset to 0x0!
Did anyone else have this experience?
Click to expand...
Click to collapse
Are you sure you had 0x0? Did you just rooted or Custom recovery?
slow_one said:
Are you sure you had 0x0? Did you just rooted or Custom recovery?
Click to expand...
Click to collapse
Absolutely certain I had 0x0 after flashing using that method.
Prior to manually updating I had Knox 0x1
I Rooted and Custom TWRP.
I followed EVERY step in that step-by-step. With ONE exception, I mistakenly flashed the Engineering Bootloader BEFORE following that tutorial.
toviaheli said:
Absolutely certain I had 0x0 after flashing using that method.
Prior to manually updating I had Knox 0x1
I Rooted and Custom TWRP.
I followed EVERY step in that step-by-step. With ONE exception, I mistakenly flashed the Engineering Bootloader BEFORE following that tutorial.
Click to expand...
Click to collapse
but how did you trip the Knox the 1st time?
slow_one said:
but how did you trip the Knox the 1st time?
Click to expand...
Click to collapse
The first day I had the Note 3 I tipped Knox when I rooted and flashed recovery,
Well if you could list what firmware you came from? What bootloader you had previously etc etc
It may help Developers with the fight against knox
Sent from my SM-N9005 using xda app-developers app
st3chn0 said:
Well if you could list what firmware you came from? What bootloader you had previously etc etc
It may help Developers with the fight against knox
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
I was on MJ4 running the MJ4 Engineering bootloader.
toviaheli said:
I was on MJ4 running the MJ4 Engineering bootloader.
Click to expand...
Click to collapse
As far as I know there is no MJ4 engineering bootloader. The engineering bootloader is NA4 which is the first kit kat leak and the bootloader is is unlocked.
Sent from my SM-N900P using Tapatalk
toviaheli said:
I was on MJ4 running the MJ4 Engineering bootloader.
Click to expand...
Click to collapse
You mean this http://forum.xda-developers.com/showthread.php?t=2655674 ??
Walter.White said:
You mean this http://forum.xda-developers.com/showthread.php?t=2655674 ??
Click to expand...
Click to collapse
I think what freeza did is morph the NA4 engineering with the NAB bootloader thus creating a daily usable NAB bootloader.
Sent from my SM-N900P using Tapatalk
JonSCSL said:
I think what freeza did is morph the NA4 engineering with the NAB bootloader thus creating a daily usable NAB bootloader.
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
I'm not so certain. I believe that unlocked bootloader was obtained the old-fashioned way, by it landing in the right hands. If what you've suggested were true, then why release it as unique? The OP of that thread makes it pretty clear that it's a very nice item to have and we won't know if another is coming.
Sent from my SM-N900P using Xparent BlueTapatalk 2
micmars said:
I'm not so certain. I believe that unlocked bootloader was obtained the old-fashioned way, by it landing in the right hands. If what you've suggested were true, then why release it as unique? The OP of that thread makes it pretty clear that it's a very nice item to have and we won't know if another is coming.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
I thought that the only unlocked bootloader that we had was NA4. Didn't know we had 2 unlocked bootloaders
Sent from my SM-N900P using Tapatalk
toviaheli said:
I was on MJ4 running the MJ4 Engineering bootloader.
Click to expand...
Click to collapse
I just believe it's the fact you have an engineering bootloader..... The bootloader you are now on is that is the engineering one or stock?
Sent from my SM-N9005 using xda app-developers app
st3chn0 said:
I just believe it's the fact you have an engineering bootloader..... The bootloader you are now on is that is the engineering one or stock?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Yes. Right now I am on the Engineering Bootloader for NAB
I was previously on MJ4 Stock Rooted.
I Flashed the NAB Engineering Bootloader
Then I flashed this: http://forum.xda-developers.com/showthread.php?t=2657447
toviaheli said:
Yes. Right now I am on the Engineering Bootloader for NAB
I was previously on MJ4 Stock Rooted.
I Flashed the NAB Engineering Bootloader
Then I flashed this: http://forum.xda-developers.com/showthread.php?t=2657447
Click to expand...
Click to collapse
can you post a screen shot? of the 0x0
kaos420 said:
can you post a screen shot? of the 0x0
Click to expand...
Click to collapse
Make a video
Sent from my SM-N900 using Tapatalk
Okay, so let me see if I have the steps correct on this.
1. You flashed a custom recovery and rooted your device, thereby tripping Knox. Did you use CFAutoroot or Kingo? The recovery would have tripped knox anyways, but just checking for root method.
2. You started with MJ4 or did you upgrade to MJ4 and if you upgraded, was Knox tripped before? (I started with MI3, some had MI5). This is mainly to find out if you tripped Knox before or after MJ4.
3. While on MJ4, you flashed the NAB engineering bootloader.
4. You ran the one-click to update to 4.4.2
If you can clear up points 1 and 2, you could probably turn this into a guide to help others.
evilvoice said:
Okay, so let me see if I have the steps correct on this.
1. You flashed a custom recovery and rooted your device, thereby tripping Knox. Did you use CFAutoroot or Kingo? The recovery would have tripped knox anyways, but just checking for root method.
2. You started with MJ4 or did you upgrade to MJ4 and if you upgraded, was Knox tripped before? (I started with MI3, some had MI5). This is mainly to find out if you tripped Knox before or after MJ4.
3. While on MJ4, you flashed the NAB engineering bootloader.
4. You ran the one-click to update to 4.4.2
If you can clear up points 1 and 2, you could probably turn this into a guide to help others.
Click to expand...
Click to collapse
any updates on this.. ??
procedure..methods..etc/..confirmation
xinfinityoO said:
any updates on this.. ??
procedure..methods..etc/..confirmation
Click to expand...
Click to collapse
I call BS all the way.
Sent from my SM-N900P using XDA Premium 4 mobile app
I think we all got trolled? :/

On nc5. Is it possible to flash nc5 eng boot loader then Odin nab?

The ability for call recording was lost in nc5. In nab it worked. Can I go back, as long as I flash the development boot loader first, to nab without borking anything?
oscarthegrouch said:
The ability for call recording was lost in nc5. In nab it worked. Can I go back, as long as I flash the development boot loader first, to nab without borking anything?
Click to expand...
Click to collapse
You can go back without flashing the eng bootloader .... you just can't go back to jb as far as you can go is kk
Sent from my SM-G900P using Xparent BlueTapatalk 2
oscarthegrouch said:
The ability for call recording was lost in nc5. In nab it worked. Can I go back, as long as I flash the development boot loader first, to nab without borking anything?
Click to expand...
Click to collapse
It's working perfectly on many roms, just not on stock.
Sent from my SM-N900P using Xparent BlueTapatalk 2
Micmars, can you suggest an as close to stock ROM that does what I'm looking for?
oscarthegrouch said:
Micmars, can you suggest an as close to stock ROM that does what I'm looking for?
Click to expand...
Click to collapse
I normally don't like to recommend a specific rom, but the Ax fits that which you seek. Again, though, I encourage you to try as you like and see what is best for you.
Sent from my SM-N900P using Xparent BlueTapatalk 2

Sim Card Question...

Going to change from Sprint to TMobile...Sim card cums tomorrow...Im rooted running kit kat 4.4...Do i need to go back to stock to be able to set up new Sim Card...i was going to Odin back to MJ 14...Is it neccesary for me to do that...???
ronny71 said:
Going to change from Sprint to TMobile...Sim card cums tomorrow...Im rooted running kit kat 4.4...Do i need to go back to stock to be able to set up new Sim Card...i was going to Odin back to MJ 14...Is it neccesary for me to do that...???
Click to expand...
Click to collapse
What ? Is your phone internationally unlocked and then domestically as well? And there is no going back to mj4
Sent from my SM-N900P using Xparent BlueTapatalk 2
Correct
Sent from my SM-T217S using Tapatalk
So if u cant go back to stock what do u have to do to b able to use the sim card...???
Is there a thread on here that explains the unlocking procedure to do this,,,???
ronny71 said:
So if u cant go back to stock what do u have to do to b able to use the sim card...???
Is there a thread on here that explains the unlocking procedure to do this,,,???
Click to expand...
Click to collapse
Ok i see where you have to go back to Sprint to unlock ...So so i have to bring it back to stock...If I cant go back to MJ 14...Then what can I take it back to,,,??? Would it be Stock unrooted with Kit Kat ??? If so whats the flashing procedure for that...???
ronny71 said:
Ok i see where you have to go back to Sprint to unlock ...So so i have to bring it back to stock...If I cant go back to MJ 14...Then what can I take it back to,,,??? Would it be Stock unrooted with Kit Kat ??? If so whats the flashing procedure for that...???
Click to expand...
Click to collapse
Same as mj4 use Odin but use the nc5 tar
Sent from my SM-N900P using Xparent BlueTapatalk 2
Epix4G said:
Same as mj4 use Odin but use the nc5 tar
Sent from my SM-N900P using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Thanx wasnt sure...:good:

Updating Android with root/ss

Hi all, I got a couple questions. I'm currently still on 4.3, running a safe-strapped Rom (Galaxy s4, VZW). I'd like to upgrade to KK.
Is the latest firmware available OTA still NC5?
What method will I need to upgrade, OTA or flash stock? Since I'm rooted, is an OTA even an option? I do have SuperSU pro's survival mode (I heard that worked for a couple people). I'm guessing otherwise I'd have to Towel root.
Finally, I assume I should delete the custom ROM slot and factory wipe my stock slot before updating. Will doing a reset affect safe strap, or will it leave it alone?
Thanks!
Sent from my SCH-I545 using Tapatalk
marbertshere said:
Hi all, I got a couple questions. I'm currently still on 4.3, running a safe-strapped Rom (Galaxy s4, VZW). I'd like to upgrade to KK.
Is the latest firmware available OTA still NC5?
What method will I need to upgrade, OTA or flash stock? Since I'm rooted, is an OTA even an option? I do have SuperSU pro's survival mode (I heard that worked for a couple people). I'm guessing otherwise I'd have to Towel root.
Finally, I assume I should delete the custom ROM slot and factory wipe my stock slot before updating. Will doing a reset affect safe strap, or will it leave it alone?
Thanks!
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2606501
decaturbob said:
http://forum.xda-developers.com/showthread.php?t=2606501
Click to expand...
Click to collapse
Thank you for the link, and everything else you've done around here, Bob. I read around a little but I couldn't figure this out: do I have to use Surge's method to upgrade or can I take an alternative route (in guessing Odin) , now that towel root exists?
I'm hesitant only bc I tried to use his downgrade /upgrade methods on a different phone and had some problems. Thanks.
Sent from my SCH-I545 using Tapatalk
Nvm, I'm going to try to giglie's method. Guess I'm going to wipe my 2nd Rom slot and factory reset my stock slot. Hope I'm on the right track?
Sent from my SCH-I545 using Tapatalk
marbertshere said:
Nvm, I'm going to try to giglie's method. Guess I'm going to wipe my 2nd Rom slot and factory reset my stock slot. Hope I'm on the right track?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
You can't use ROM slots with 3.72 safestrap. ROM must be installed to stock slot. Take and research this info.
sent by slimkat
I went back to stock using Odin. took update, rooted with towelroot installed Safestrap 3.72 . Then installed custom KK rom. All worked without any issues
Here is a link with videos
http://forum.xda-developers.com/showthread.php?t=2337590
Sent from my SCH-I545 using Xparent Green Tapatalk 2
spjetrovic said:
I went back to stock using Odin. took update, rooted with towelroot installed Safestrap 3.72 . Then installed custom KK rom. All worked without any issues
Here is a link with videos
http://forum.xda-developers.com/showthread.php?t=2337590
Sent from my SCH-I545 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Thanks for the info. I was just curious, could I do a full unroot/reset (I rooted with saferoot) instead of flashing stock with odin? I mean, same end result, right
Sent from my SCH-I545 using Tapatalk
decaturbob said:
You can't use ROM slots with 3.72 safestrap. ROM must be installed to stock slot. Take and research this info.
sent by slimkat
Click to expand...
Click to collapse
Thanks for the link again. I meant I would wipe my current custom ROM slot before I flash to stock or update anything.
Sent from my SCH-I545 using Tapatalk
marbertshere said:
Thanks for the info. I was just curious, could I do a full unroot/reset (I rooted with saferoot) instead of flashing stock with odin? I mean, same end result, right
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I would recommend Odin full wipe tar. This gets your phone 100% stock. It's safe, simple and proven to work.
Watch the videos they help a lot.
I haven't done it the other way!
Don't want to miss lead you.
Sent from my SCH-I545 using Xparent Green Tapatalk 2
spjetrovic said:
I would recommend Odin full wipe tar. This gets your phone 100% stock. It's safe, simple and proven to work.
Watch the videos they help a lot.
I haven't done it the other way!
Don't want to miss lead you.
Sent from my SCH-I545 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
No, thank you! Videos are incredibly helpful. I was just curious.
Sent from my SCH-I545 using Tapatalk

Need info on upgrading nh7 to nk4

First i would like to say, Thanks for checking out my post. Now i have a question. I am running freezas rom and i have the nh7 firmware. How do i upgrade this to nk4?
Is it true i have to facyory reset my phone and run the ota update? If so it will not allow me to update, because my device had a custom rom. Also where can i find the nk4 tar file so i can odin it to my note 3?
Sent from my SM-N900P using Tapatalk
jhunt75 said:
First i would like to say, Thanks for checking out my post. Now i have a question. I am running freezas rom and i have the nh7 firmware. How do i upgrade this to nk4?
Is it true i have to facyory reset my phone and run the ota update? If so it will not allow me to update, because my device had a custom rom. Also where can i find the nk4 tar file so i can odin it to my note 3?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
If you factory reset, then odin the nk4 update, you will be on official firmware. Odin will over-write your old system, giving you official status. This is how we all go from rooted roms to official in order to get updates.
Sent from my SM-N900P using XDA Free mobile app
Or wait for a dev to put out a rooted update. And lollipop is being sent out so maybe wait a little bit.
w7excursion said:
Or wait for a dev to put out a rooted update. And lollipop is being sent out so maybe wait a little bit.
Click to expand...
Click to collapse
I think I will wait on a developer as well.
Sent from my SM-N900P using Tapatalk

Categories

Resources