After I flashed SEE-I9300XXUGMK6 (Android 4.3 Official) on GT-I9300 i cant make phone calls,it keeps saying Not registered on network.I have tried to flash patched modems but it is still not working,after i tried to patch using ARIZA the previous error dissapeared and it keep showing the circle like the picture i attached below.(P.S:I think my IMEI hasnt changed but the serial number yes).I would appreciate your help.
You need to install patched MK6 modem and Boeffla 5.1 kernel.
All can be found on site here
Sent from my GT-I9300 using Tapatalk
---------- Post added at 12:42 PM ---------- Previous post was at 12:40 PM ----------
gmusliaj said:
After I flashed SEE-I9300XXUGMK6 (Android 4.3 Official) on GT-I9300 i cant make phone calls,it keeps saying Not registered on network.I have tried to flash patched modems but it is still not working,after i tried to patch using ARIZA the previous error dissapeared and it keep showing the circle like the picture i attached below.(P.S:I think my IMEI hasnt changed but the serial number yes).I would appreciate your help.
Click to expand...
Click to collapse
RickEphraims said:
You need to install patched MK6 modem and Boeffla 5.1 kernel.
All can be found on site here
Look here for links to your problem
http://forum.xda-developers.com/showthread.php?t=1918601
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
RickEphraims said:
You need to install patched MK6 modem and Boeffla 5.1 kernel.
All can be found on site here
Sent from my GT-I9300 using Tapatalk
---------- Post added at 12:42 PM ---------- Previous post was at 12:40 PM ----------
What if i install Imperium_v25.0?!I think this will work ,im downloading it now
RickEphraims said:
You need to install patched MK6 modem and Boeffla 5.1 kernel.
All can be found on site here
Look here for links to your problem
http://forum.xda-developers.com/showthread.php?t=1918601
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Related
Hello,
I recently bought Samsung Galaxy S2 i9100 factory unlocked with installed Jelly Bean 4.1.1 (CyanogenMod 10) and no imei and baseband.
I tried everything to fix the issue, but nothing worked. I searched this forum and some user said that I should use jtag to wtie correct efs folder and z3x or sl-box to repair imei etc.
Is there any other way to repair corrupted efs and imei, because I don't have those tools and I don't have any money to spend on local mobile service.
Any help is appreciated.
risfa123 said:
Hello,
I recently bought Samsung Galaxy S2 i9100 factory unlocked with installed Jelly Bean 4.1.1 (CyanogenMod 10) and no imei and baseband.
I tried everything to fix the issue, but nothing worked. I searched this forum and some user said that I should use jtag to wtie correct efs folder and z3x or sl-box to repair imei etc.
Is there any other way to repair corrupted efs and imei, because I don't have those tools and I don't have any money to spend on local mobile service.
Any help is appreciated.
Click to expand...
Click to collapse
have you ever flashed Siyah kernel before?
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
have you ever flashed Siyah kernel before?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I didn't . Maybe previous owner did. Is that might cause this ?
risfa123 said:
I didn't . Maybe previous owner did. Is that might cause this ?
Click to expand...
Click to collapse
No, Siyah kernel won't cause this, but Siyah kernel always take a backup of the efs partition on your Sdcard every time you flash it.
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 12:58 PM ---------- Previous post was at 12:56 PM ----------
Can you post everything you have tried to fix the problem. I've been lucky helping people fix the same issue.
Sent from my GT-I9100 using Tapatalk 2
Jokesy said:
No, Siyah kernel won't cause this, but Siyah kernel always take a backup of the efs partition on your Sdcard every time you flash it.
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 12:58 PM ---------- Previous post was at 12:56 PM ----------
Can you post everything you have tried to fix the problem. I've been lucky helping people fix the same issue.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I tried this : GSII_repair , Galaxy S unlock , efs pro tool on computer , flashed different modems (5-6 times) , flashed to stock rom 2.3.3 and trying to connect to kies on computer ( to update to ics) but it's just connecting (that was the most annoying thing ) , "repair imei in 9 steps" post etc.
risfa123 said:
flashed to stock rom 2.3.3 and trying to connect to kies on computer ( to update to ics) but it's just connecting (that was the most annoying thing)
Click to expand...
Click to collapse
You have to try this again, and it has to be successful (you need to use Kies to update to ICS) before i can suggest any other thing.
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 02:29 PM ---------- Previous post was at 02:10 PM ----------
You apparently opened two threads to solve the same problem. This is not good enough and it's against forum rules.
So which thread do you want to stick with? Your ICS 4.0.4 one or this one? So that I'll know which one to report
Sent from my GT-I9100 using Tapatalk 2
I have some queries. I live in Pakistan and my current firmware is of UK/Ireland. My phone is unbranded so will XWLS8 work on my network? Do I need to make a backup of my efs folder before flashing XWLS8? Also I have reset my counter to zero and I see no triangle when my phone boots up, so will flashing via PC Odin increase the counter? Or I should do it using Mobile Odin Pro? Please guide!
Thanks in advance!
Sent from my GT-I9100 using xda premium
Listen its Better you make backup of EFS means it wont hurt you...
You can use Odin
Sent from my iPhone using Tapatalk
---------- Post added at 04:30 PM ---------- Previous post was at 04:30 PM ----------
And It will work on your network just choose the unbranded version of firmware
Sent from my iPhone using Tapatalk
Omaxe said:
Listen its Better you make backup of EFS means it wont hurt you...
You can use Odin
Sent from my iPhone using Tapatalk
---------- Post added at 04:30 PM ---------- Previous post was at 04:30 PM ----------
And It will work on your network just choose the unbranded version of firmware
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
True
Hello Guys,
my s2 GT-19100 is rooted with original 4.1.2 and CRW. Everything works fine...then I found an update from SUSuperUser App in PlayStore to upgrade from 0.99 to 1.25. After I downloaded and installed this update, su asks me to install in NORMAL or CRW mode...so I choose CRW.
Phone rebooted but no nothing happens...I tried everything VOL-UP+Power+Main-Button...no reaction...put battery out and in...no reaction :
Please help me...what do I have to do now?
Why update in Cwm mide when you can update in android.
Pull out battery 5 min
Then try to charge for a while.
Then try again
Sent from my GT-I9100 using Tapatalk 2
After I opened the app, it first asks me to update binaries...i clicked YES. After that there comes another install/update procedure...not the update procedure from play store...to install SU and there were 2 options (NORMAL OR CWM)...I remembered I uses CWM while rooting my phone so I took that option...and SU reboots my phone and now nothing works...
Ok I will try
Some kind of a brick... try that if doesnt work you need an USB jig to force it to download mode
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:30 AM ---------- Previous post was at 09:24 AM ----------
Or make your own
https://www.google.com/url?sa=t&sou...kA-nVqunjl9Fi1Uzw&sig2=txwptMrTjFzSkt4A1ihDuA
Sent from my GT-I9100 using Tapatalk 2
Charging does not work...but I can get in download mode with VOLDOWN+POWER+MAINBUTTON...that works and show me
Code:
ODIN MODE
PRODUCT NAME: GT-i9100
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: CUSTOM
Downloading...
Do not turn off target !!
Re--Flash the kernel via ODIN ?
Flash siyah v6 beta5 tar från siyah homepage
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:43 AM ---------- Previous post was at 09:43 AM ----------
Then just restart
Sent from my GT-I9100 using Tapatalk 2
But I have original 4.1.2 JB and it works? and where is it? Yesterday at rooting I used another kernel... i am confused
Omg listen to what i say. Just use kernel that i told you. Its Jelly Bean compatible.
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:54 AM ---------- Previous post was at 09:53 AM ----------
Search siyah kernel google and you will see a link called gorkhanmoral i think
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Downloaf TAR file its for odin. Dont unzip.
Choose pda in odin and flash
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
You can use either Siyah, Dorimanx or Philz kernel
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:00 AM ---------- Previous post was at 09:58 AM ----------
You previous root was wrong thats why you softbricked
Sent from my GT-I9100 using Tapatalk 2
ok I will do that now...
I uses jeboo kernel
OK its done...now it opens:
Android system recovery (3e)
options:
- reboot system now
- apply update from external storage
- wipe data/factory reset
- wipe cache partition
- apply update from cache
- test redbend fota[FS]
E:bad option "fs_options=loop"
can't unmount /system (no such file or directory)
What are you do in cwm?
Just restart phone when flashed kernel
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:14 AM ---------- Previous post was at 10:14 AM ----------
I dont realy understand what you are doing
Sent from my GT-I9100 using Tapatalk 2
---------- Post added at 10:17 AM ---------- Previous post was at 10:14 AM ----------
I dont think you listening carefully.
You said that you updated your SUPERSU and choose for some reason CWM and you bricked it.
Then you said you can use Downloadmode. Fine its not hardbrick.
Then you said youre on stock JB 4.1.2 and rooted with annother kernel. OK
Now you flashed siyah and then you get into Recovery? Why do you do that.
Why dont you just restart the phone and it will boot into android. Why WIPE?
These options come automatically after flashing siyah and reboot by odin. Now my phone loads again...yeeeeeeah it works
Do I have to remove/uninstall the old jeboo kernel? And if yes, HOW ?
Thank you so much
nordlicht85 said:
These options come automatically after flashing siyah and reboot by odin. Now my phone loads again...yeeeeeeah it works
Do I have to remove/uninstall the old jeboo kernel? And if yes, HOW ?
Thank you so much
Click to expand...
Click to collapse
No you dont need to uninstall. You kernel is removed automaticly by kernel you just flashed. And in that case Siyah or wich one you choose.
Glad that it works
What is the cm10.1 stuff on the same post on siyah homepage? Do I need this also ?
nordlicht85 said:
What is the cm10.1 stuff on the same post on siyah homepage? Do I need this also ?
Click to expand...
Click to collapse
NO. CM10 is Custom Rom version. Its compatible with Siyah. So CM10 is not a kernel its a ROM
Siyah , Dorimanx and Philz is KERNELS you just flashed to get root acess and Clockworkmod recovery to flash custom ROMS
But now you have yellow triangle when you start you S2 dont you?
Remove it with app called Triangle Away.
Yes I have this triangel...but is this bad or just a picture?
nordlicht85 said:
Yes I have this triangel...but is this bad or just a picture?
Click to expand...
Click to collapse
No not bad. It just showing you that phone is flashed with something CUSTOM like CUSTOM ROM or Custom Kernel.
Do you have MSN or Something. I can give you Triangle Away app and you can reset the counter
So here's the story..
I recently decided to root my Galaxy s6 Edge 6.0.1. The root worked fine.
However, I found out that it caused the default phone app to not work properly. I could call and receive calls, but neither of us could hear each other.
I downloaded this one app that can modify system apps. I went to the phone app, backed it up, deleted, and tried to re install. However.. It failed me. It would not let me use the backup I had created, and just let me to the google play store.
After trying so many things to fix it, I ended up just removing the root, and factory reset my phone. Now I have a new problem. It wont even let me call anyone. It tells me "Unfortunately com.android.phone has stopped working". Now I tested it to see if it was the actual phone. I downloaded WhatsApp and tried calling from there. It worked fine, and I could hear the other person and they could hear me. Which lead me to believe that it was a problem with the systems phone.
Is there anyway to get that back? What can I do? Please help, I literally just voided my warranty 24 hours ago and now it's about to bite me in the ass....
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
pickles523 said:
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
1. Reflash entire stock rom via odin
Sent from my SM-G925P using Tapatalk
pickles523 said:
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Which are? I'm prepared to do anything lol. This is really pissing me off.
pickles523 said:
There are only 2 ways you are going to get it back
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
1. Reflash entire stock rom via odin
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
2. Or someone creates a flashable zip that can reinstall the stock phone dialer.
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
I will make a flashable zip of mine for you to flash via twrp if you want to try that first
Sent from my SM-G925P using Tapatalk
pickles523 said:
2. Or someone creates a flashable zip that can reinstall the stock phone dialer.
Sent from my SM-G925P using Tapatalk
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
I will make a flashable zip of mine for you to flash via twrp if you want to try that first
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Well Currently installing the stock firmware. Have a bit of time before that's downloaded, But I found this: (Except with my model instead of OP's) http://thedroidguy.com/2015/08/flas...sung-galaxy-s6-to-fix-rebooting-issue-1048633
Is this what you're talking about?
You just need sammobile to get your firmware
Sent from my SM-G925P using Tapatalk
For people that needs / wants to go back to so you can send in your tablet in for repair, or just for fun, I had made these stock PA1 flashable .zip's I have 2, one is ROOTED and one isn't ROOTED.
Non-ROOTED: https://drive.google.com/file/d/0B5EVF8f93NAlajVzRnVkWF9TcUk/view?usp=sharing
Stock recovery.img: https://drive.google.com/file/d/0B5EVF8f93NAlc3NIZ3o4c2tnUjQ/view?usp=sharing
ROOTED: https://drive.google.com/file/d/0B5EVF8f93NAleU1JcGFfaFltUUE/view?usp=sharing
Could you give a log and some details about your rom, please? Is it a beta or can be used as a daily driver?
Thanks
maxray said:
Could you give a log and some details about your rom, please? Is it a beta or can be used as a daily driver?
Thanks
Click to expand...
Click to collapse
Daily driver.
I downloaded the zip and tried to flash it. In TWRP it starts to extract files with the progress bar only a 1/4 of the way over and after about 10 seconds it reboots back into recovery as if it crashed. I figured it was a bad download so I downloaded it again and tried a second time and same thing. not sure if it a bad upload or what I am doing wrong. I am using rooted version. Thanks
JonSCSL said:
I downloaded the zip and tried to flash it. In TWRP it starts to extract files with the progress bar only a 1/4 of the way over and after about 10 seconds it reboots back into recovery as if it crashed. I figured it was a bad download so I downloaded it again and tried a second time and same thing. not sure if it a bad upload or what I am doing wrong. I am using rooted version. Thanks
Click to expand...
Click to collapse
Hmm, strange I downloaded it, and flashed it a couple of days ago.... And it booted for me. Make sure you are using the latest TWRP. I used this recovery to flash mine... https://drive.google.com/file/u/1/d/0B5EVF8f93NAlWUFWeHRjdXFXMkE/view?usp=drive_web
secretwolf98 said:
Hmm, strange I downloaded it, and flashed it a couple of days ago.... And it booted for me. Make sure you are using the latest TWRP. I used this recovery to flash mine... https://drive.google.com/file/u/1/d/0B5EVF8f93NAlWUFWeHRjdXFXMkE/view?usp=drive_web
Click to expand...
Click to collapse
It might not be the latest TWRP. It was installed like a year ago. I will check tonight when I get home. Thanks
Sent from my SM-N950U using Tapatalk
JonSCSL said:
It might not be the latest TWRP. It was installed like a year ago. I will check tonight when I get home. Thanks
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Ok, your welcome
I tried with the same TWRP like yours and I encounter the same problem like JonSCSL, maybe it is a broken download after all
maxray said:
I tried with the same TWRP like yours and I encounter the same problem like JonSCSL, maybe it is a broken download after all
Click to expand...
Click to collapse
I ended up using samsung smart switch for Windows and installed stock update then installed twrp then flashed supersu.zip.
Sent from my SM-N950U using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
JonSCSL said:
I ended up using samsung smart switch for Windows and installed stock update then installed twrp then flashed supersu.zip.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
No data loss at all.
Sent from my SM-N950U using Tapatalk
JonSCSL said:
I ended up using samsung smart switch for Windows and installed stock update then installed twrp then flashed supersu.zip.
Sent from my SM-N950U using Tapatalk
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
No data loss at all.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
So you didn't manage to flash it either after all and you're just samsung stock
---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------
I am curious if this build is based on 4.4 or newer android version
maxray said:
So you didn't manage to flash it either after all and you're just samsung stock
---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------
I am curious if this build is based on 4.4 or newer android version
Click to expand...
Click to collapse
4.4 I do not notice any difference between the previous build.
Sent from my SM-N950U using Tapatalk
maxray said:
So you didn't manage to flash it either after all and you're just samsung stock
---------- Post added at 10:47 PM ---------- Previous post was at 10:46 PM ----------
I am curious if this build is based on 4.4 or newer android version
Click to expand...
Click to collapse
It's stock.
This post is obsolete. All links are no longer available