Hello. I recently updated my GS3 to the newest Cyanogenmod. I think it was something SNAPSHOT. When I try to boot my device I put the pincode there and when I go to the home screen it says "Android.process.acore has stopped working" or something like that. After that it says "Dialer has stopped working". Then it reboots and the same problem happens again and again. Does someone know how to solve this?
Full wipe and reflash, check the md5 of your download.
boomboomer said:
Full wipe and reflash, check the md5 of your download.
Click to expand...
Click to collapse
Thanks.
Related
Installed this rom and gappa from here earlier today:
http://forum.xda-developers.com/showthread.php?t=1720628
I cant get the wireless to work. i get the 'unfortunately stopped working' error everytime i enter in the network settings...
any way to get around this?
tried flashing my xxlfb moder driver but i guess that was a long shot to begin with.
jbonetwo said:
Installed this rom and gappa from here earlier today:
http://forum.xda-developers.com/showthread.php?t=1720628
I cant get the wireless to work. i get the 'unfortunately stopped working' error everytime i enter in the network settings...
any way to get around this?
tried flashing my xxlfb moder driver but i guess that was a long shot to begin with.
Click to expand...
Click to collapse
Try factory reset or reinstall rom with wipe .
jje
JJEgan said:
Try factory reset or reinstall rom with wipe .
jje
Click to expand...
Click to collapse
I've done just that. factory reset/wipe cache/wipe dalvik but no luck!
according to this faq for cyanogen 9:
http://teamhacksung.org/wiki/index.php/Experimental:GT-I9300:Frequently_Asked_Questions
i should delete /data/.cid.info
unfortunately that file does not exist so im stumped. no1 else had this problem and figured out a workaround?
Any suggestions? I've done everything, as it's said in the instruction. I only had a problem with Formating Data - the process always finished with failure, but I skipped it.
[Update]
After doing a reset I managed to stuck on androwood Prime logo.
maxonick said:
Any suggestions? I've done everything, as it's said in the instruction. I only had a problem with Formating Data - the process always finished with failure, but I skipped it.
[Update]
After doing a reset I managed to stuck on androwood Prime logo.
Click to expand...
Click to collapse
You have a problem if you cannot format data. You cannot simply miss steps because they don't work.
Try getting the downgrade zip that will take you back to the 4.1.1 bootloader and compatible twrp.
Then try doing all the wipes suggested before and try installing hairybean 1.51
If that all works try the upgrade process again.
quo nksgide
flumpster said:
You have a problem if you cannot format data. You cannot simply miss steps because they don't work.
Try getting the downgrade zip that will take you back to the 4.1.1 bootloader and compatible twrp.
Then try doing all the wipes suggested before and try installing hairybean 1.51
If that all works try the upgrade process again.
Click to expand...
Click to collapse
Is there a way to fix without downgrading?
maxonick said:
Is there a way to fix without downgrading?
Click to expand...
Click to collapse
It is not working. What is the problem with trying the downgrade zip to see if it fixes it?
I wiped the internal storage, now it seems to be loading.
[Update] Stuck again.
flumpster said:
It is not working. What is the problem with trying the downgrade zip to see if it fixes it?
Click to expand...
Click to collapse
Tried your method, flashed downgrade.zip, still stucks on Formating data. Same error.
maxonick said:
Tried your method, flashed downgrade.zip, still stucks on Formating data. Same error.
Click to expand...
Click to collapse
I have never seen this. Can you look in mounts and see what is ticked on and what can and can't be ticked on.
flumpster said:
I have never seen this. Can you look in mounts and see what is ticked on and what can and can't be ticked on.
Click to expand...
Click to collapse
Managed to install HearyBean 1.51, by the way, seems, successfully. I'll post here, if I'll have any success with upgrading to HearyBean 2.2
flumpster said:
I have never seen this. Can you look in mounts and see what is ticked on and what can and can't be ticked on.
Click to expand...
Click to collapse
Think found it! There was no blue loading line after flashing, cause I powered off instead of rebooting, now I'll try to install.
maxonick said:
Think found it! There was no blue loading line after flashing, cause I powered off instead of rebooting, now I'll try to install.
Click to expand...
Click to collapse
Stuck on the Asus logo.
Thank you for your help! Your ROM is GREAT!!!
Today, I tried to flash Project Infinity on my 900T and after doing so, I am stuck in a boot loop. I tried to format /system and re installing but that led to no success. Any help?
may be bad download? did u checksum? try redownload and select stock kernel see how it goes.
koolboyztn said:
may be bad download? did u checksum? try redownload and select stock kernel see how it goes.
Click to expand...
Click to collapse
Well I eventually got it to work but when I booted it, things were really buggy and I really couldn't do anything. When I would go through the initial setup of the Project Infinity ROM, there would be a constant error message like: "com.systemui has stopped" and everything was unresponsive. So I flashed the stock ROM and i'm back to vanilla touchwiz.
Also, what is checksum?
flibble3 said:
Well I eventually got it to work but when I booted it, things were really buggy and I really couldn't do anything. When I would go through the initial setup of the Project Infinity ROM, there would be a constant error message like: "com.systemui has stopped" and everything was unresponsive. So I flashed the stock ROM and i'm back to vanilla touchwiz.
Also, what is checksum?
Click to expand...
Click to collapse
Did you wipe data / cache before flashing?
Exel said:
Did you wipe data / cache before flashing?
Click to expand...
Click to collapse
Yea, I did.
checksum is just the way to check made sure u got a good download.
koolboyztn said:
checksum is just the way to check made sure u got a good download.
Click to expand...
Click to collapse
How do I do that?
diiferent files manager app have different way to check, u may need to google it.
koolboyztn said:
diiferent files manager app have different way to check, u may need to google it.
Click to expand...
Click to collapse
I found a way, but the developer doesn't provide a md5 checksum so i'm lost there. Do you think using a different recovery will help?
After I formatted my phone and entered the configuration settings. I always get stocked on the google location and gmail account and a message always appears "The com.google.process.gapps has stopped." . Please help me. I can use my phone right now. Because it's always like that.
Reflash stock rom using odin.
Flash gapps
Just flash the jelly bean based gapps and ur good to go
Harvey9050 said:
After I formatted my phone and entered the configuration settings. I always get stocked on the google location and gmail account and a message always appears "The com.google.process.gapps has stopped." . Please help me. I can use my phone right now. Because it's always like that.
Click to expand...
Click to collapse
Gapps flash man not need whole rom flash and from now on keep nand backups
Hello there. So today for some reason I've got a message from Device Security saying "Unauthorized actions have been detected. Restart your phone to undo these actions."
I did restart my phone, by tapping the restart option on the screen. It turned off, went to a blue screen, restarted and the message kept popping up..
I also tried to factory reset the phone, still no luck.
Has any of you went through this? Or found a way to revert those "Unauthorized actions" ?
Fix system error message
I understand your problem. Just try to reinstall your OS using Samsung Kies. Full tutorial here : https://www.youtube.com/watch?v=LqoX7wNhotk
I hope it'll be fixed as soon as possible
Good luck,
Thanks, but it didnt worked. :| anything else?
Glitchy message. I don't know why it sometimes go in comment part
Well..I tried to flash a frimware hopefully it works. If not, I'l try this :|
Okay, try to install twrp, do a full twrp backup (=nandroid backup) and then install Lineage OS. Full tutorial here : https://www.youtube.com/watch?v=a8-ISL3gM_s
Hope it will solve your problem. Twrp backup is usefull, so you can restore your data in lineage os using Titanium backup.
You also can try to wipe every partitions in TWRP except /sdcard and reinstall os via Samsung Kies
Well...It seems the device is back.. but how it will run..
What do you mean by "the device is back.. but how it will run.. "
Is it working
Yea.. I mean it's working again. Idk how.. But now that I've used Odin to flash a stock rom, the warranty is still available?
GalaxyRSR said:
Admin Note: This is a special Q&A-formatted thread. Please follow this link to view it in your browser: http://xda.tv/post74899750
Click to expand...
Click to collapse
Have you flash with Odin yet?
yes i did.. its working now