Hello-
I am trying to update my HTC Titan from Windows Phone 7.5 to 7.8 and am receiving error code 8007013.
The only method for updating I have attempted is using the SevenEighter tool from http://windowsphonehacker.com/articles/want_windows_phone_7.8_now_try_this_easy_tool-01-31-13
I have performed a factory reset and still receive the error when attempting to update.
I have found mentions of the issue in this thread, but did not find a resolution: [CAB] Official WP7 Updates List up to WP 7.8 + ALL LANGUAGES complete + OEM updates http://forum.xda-developers.com/showthread.php?t=1306415
The problem is referenced in this thread: [SOLVED] 80070013 error while updating to 7740 http://forum.xda-developers.com/showthread.php?t=1435745 however, the solution is apparently found at http://forum.xda-developers.com/showthread.php?t=1334468, which does not exist.
I have found an archive for thread 1334468 via the Wayback Machine: [ROM]Eternity Shipped ROM Collection http://web.archive.org/web/20111124033746/http://forum.xda-developers.com/showthread.php?t=1334468 however:
1.) I do not understand the instructions located in this thread.
2.) As the thread has been deleted, so have the attachments.
3.) The referenced attachments are apparently only for European handsets. Mine is from the United States.
I do not appear able to get past this on my own, and would appreciate any help from the community. Thank you.
Log entries for most recent attempt
UpdateWP.exe Information: 0 : 3/9/2014 12:26:04 PM: Device Manager Initializing
UpdateWP.exe Information: 0 : 3/9/2014 12:26:04 PM: Device Manager Initialized
UpdateWP.exe Information: 0 : zune-tuner://windowsphone/2ead28ff%20-%207a54c5d5%20-%20961a12ae%20-%20937d942b
UpdateWP.exe Information: 0 : 3/9/2014 12:26:05 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Downloading updates 0%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:07 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Transferring updates 23%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:07 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Transferring updates 47%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:07 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Transferring updates 70%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:07 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Transferring updates 94%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:07 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Transferring updates 100%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:07 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Preparing to install 0%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:09 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Restarting your phone 0%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:09 PM: Waiting for reboot
UpdateWP.exe Information: 0 : 3/9/2014 12:26:15 PM: Device Removal: 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b
UpdateWP.exe Information: 0 : 3/9/2014 12:26:15 PM: Receive Removal Event!
UpdateWP.exe Information: 0 : 3/9/2014 12:26:30 PM: Device Arrival: 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b
UpdateWP.exe Information: 0 : 3/9/2014 12:26:30 PM: Receive Arrival Event!
UpdateWP.exe Information: 0 : zune-tuner://windowsphone/2ead28ff%20-%207a54c5d5%20-%20961a12ae%20-%20937d942b
UpdateWP.exe Information: 0 : 3/9/2014 12:26:32 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Executing Installing updates 0%
UpdateWP.exe Information: 0 : 3/9/2014 12:26:38 PM: Device 2ead28ff - 7a54c5d5 - 961a12ae - 937d942b Update Error 80070013 An unexpected error has occurred.%
More information
Here is another thread which states the problem is solved:
(SOLVED) Error 80070013 when installing update? Check your serial number http://forum.xda-developers.com/showthread.php?t=1481445
However, the solutions appear to be dependent on http://www.htc.com/www/help/htc-titan/#download, which does not work, and, once again, thread 1334468, which does not exist.
It appears what I need to be able to do is "flash Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.2 6 _A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh" however I do not know how to do this, and do not know where I can get this file.
Found the file from HTC
I found the patch from HTC by viewing the page source of an archived page:
dl4.htc.com/managed-assets/support/software/rom-code/htc-titan-zune-RUU/spl_2.6.160015.3_WWE.exe
I have also found the following instructions:
<strong>Release Date: </strong>2012-05-04
<p>This update for HTC TITAN will let your phone to be successfully upgraded via Zune. (Microsoft Zune Error Code: 80070013 / 8007000F)</p>
<h4>Requirements:</h4>
<br /> <ol>
<li> PC installed with Zune</li>
<li> Battery Capacity: At least 35%</li>
<li> OS Version: 7720 (7.10.7720.68) or later version</li>
</ol><br />
<h4>Installation Instructions:</h4>
<br /><br /> Follow the instructions below to download and install the update on your phone:<br /><br /> <ol>
<li>From your phone device:<br /> (a). With the phone turned off, press and hold the VOLUME DOWN and VOLUME UP buttons, and then briefly press the POWER button.<br /> (b). Release the VOLUME DOWN and VOLUME UP button after you see the white screen with "security" on left-upper corner.</li>
<br />
<li>Use the USB cable to connect your phone with computer, You will see "USB" shown on screen of the phone. </li>
<br />
<li>From your computer:<br /> (a). Click Download which is located at the bottom of this page to download this update (spl_2.6.160015.3_xxx.exe) onto your computer.<br /> (b). Start the software update by executing the download file (spl_2.6.160015.3_xxx.exe), and follow the on-screen instructions.</li>
I will attempt this and report the results.
Success
All updates have been successful. The phone had been running 7.10.7740, essentially the original Mango release from September 2011. No update available from Zune, no update available from AT&T. Ridiculous. There were so many updates pending the whole process took 40 minutes.
Huge thanks to everyone who contributed to the threads and tools I used to finally crack this nut.
Hopefully this thread will help other stragglers such as myself.
successful Titan II WP 7.8 load
Just wanted to chime in and report a successful update. I followed the procedure at Windows Central http://forums.windowscentral.com/htc-titan-ii/214875-2.htm "ATT Titan II updated to 7.8." This process uses the Seven-Eighter update tool, which even worked through a Parallels virtual machine. Just follow the steps and voila!
I had tried the cab moving method, and that only gave me a set of errors, regardless of what I tried to do. I also tried the "trick Zune" method of quick disconnect of the network connection with no dice. With the Seven-Eighter update tool, it worked as advertised after two false starts, one where the connection timed out (due to Parallels asking me "which OS do you want to connect this device to"). Six updates loaded onto my phone...
Related
This has been solved! Check at bottom for solution!
I have been looking around to find a way to unlock it simply, but nothing was possible.
I've enabled all development settings, it's SEMC SIMLOCK, it's still on R, I've even moved to other rom to try it to make it work, disabled AV, firewall, installed drivers, everything but NOTHING worked.
Here are logs (Flashtool 0.6.7.0 and generic msm7227 cmd file):
Code:
18/010/2012 01:10:57 - INFO - <- This level is successfully initialized
18/010/2012 01:10:58 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-15 22:00:21
18/011/2012 01:11:06 - INFO - Device connected with USB debugging off
18/011/2012 01:11:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/011/2012 01:11:08 - INFO - List of connected devices (Device Id) :
18/011/2012 01:11:08 - INFO - - USB\VID_0FCE&PID_2138\4342353131534C4E5235 Driver installed : true
18/011/2012 01:11:08 - INFO - - USB\VID_0FCE&PID_2138&MI_01\6&1A726446&0&0001 Driver installed : true
18/011/2012 01:11:08 - INFO - - USB\VID_0FCE&PID_2138&MI_00\6&1A726446&0&0000 Driver installed : true
18/011/2012 01:11:08 - INFO - List of ADB devices :
18/011/2012 01:11:09 - INFO - - 4342353131534C4E5235
[B]18/011/2012 01:11:09 - INFO - - emulator-5554[/B] [I]< What the hell is this!?[/I]
18/011/2012 01:11:09 - INFO - List of fastboot devices :
18/011/2012 01:11:09 - INFO - - none
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
Waiting ...
error: more than one device and emulator
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
Waiting ...
error: more than one device and emulator
Getting ROOT rights.
error: more than one device and emulator
Waiting ...
error: more than one device and emulator
Writing patched semcboot. Two step process
First, we need get access to semcboot area
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
Second, we need to write semcboot ;)
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
Press any key to continue . . .
I really want to know how to fix this damn thing because I've wasted 5 HOURS ON THIS and NOTHING WORKED.
Here's solution: Run CMD, and run adb -e reboot (forces all emulators to reboot), and make sure you don't have any other emulators by running command "adb devices". You'll have to check 3-4 times to be sure by terminating idle adb.exe in task manager.
I have a rooted TF201 that is otherwise stock (.28). I was trying to load an app I'm working on to the TF201, but I'm seeing the following errors in the Android logs:
[2012-09-17 11:08:03 - xxxx] ------------------------------
[2012-09-17 11:08:03 - xxxx] Android Launch!
[2012-09-17 11:08:03 - xxxx] adb is running normally.
[2012-09-17 11:08:03 - xxxx] Performing com..xxxx activity launch
[2012-09-17 11:08:03 - xxxx] Automatic Target Mode: using device 'C4OKASxxxx'
[2012-09-17 11:08:03 - xxxx] Uploading xxxx.apk onto device 'C4OKASxxxx'
[2012-09-17 11:08:03 - xxxx] Failed to install xxxx.apk on device 'C4OKASxxxx': Not a directory
[2012-09-17 11:08:03 - xxxx] com.android.ddmlib.SyncException: Not a directory
[2012-09-17 11:08:03 - xxxx] Launch canceled!
Can anyone shed any light on how to fix this?
Hi, I am having issues with a Huawei modem E173u-1 on my tablet Archos 101 g9 8gb
driver not found.
Can you help me, pls?
USB_ModeSwitch log from Wed Apr 09 17:50:44 PKT 2014
Raw args from udev: 1-1/1-1:1.0
Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer HUAWEI
product HUAWEI Mobile
serial
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/12d1.14fe
! matched. Reading config data
devList 1:
config: TargetVendor set to 12d1
config: TargetProduct set to 1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Logger is: /system/bin/log
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 2 -v 12d1 -p 14fe -f $cB
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x14fe
TargetVendor= 0x12d1
TargetProduct= 0x1506
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/002 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Could not reset endpoint (probably harmless): -34
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -6
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (4 sec.) ...
Waiting for device file system (5 sec.) ...
Waiting for device file system (6 sec.) ...
Waiting for device file system (7 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 12d1:1506 (HUAWEI: HUAWEI Mobile)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /sbin/insmod
Trying to find and install main driver module "option"
Trying to find module "option"
Loading support module /lib/modules/usb_wwan.ko
Error: insmod: cannot insert '/lib/modules/usb_wwan.ko': Invalid module format (-1): Exec
format error
Loading main driver module "option"
Error: insmod: cannot insert '/lib/modules/option.ko': Invalid module format (-1): Exec
format error
Falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding seems to have failed
All done, exiting
please answer!!!
i'm solved the problem by replacing the nucleus
I am sorry that I know there are so many articles talking about
Drivers need to be installed for connected device.
You can find them in the drivers folder of Flashtool.
I have read so many articles but still cannot find out the problem.
I go to "Devices" of Flashtool and "Check Drivers"
It gave me this
01/004/2014 00:04:31 - INFO - List of connected devices (Device Id) :
01/004/2014 00:04:31 - INFO - - USB\VID_0FCE&PID_51AF\CB5A1YAHWN Driver installed : true
01/004/2014 00:04:31 - INFO - - USB\VID_0FCE&PID_51AF&MI_01\6&E66E0BD&0&0001 Driver installed : true
01/004/2014 00:04:31 - INFO - - USB\VID_0FCE&PID_51AF&MI_00\6&E66E0BD&0&0000 Driver installed : true
01/004/2014 00:04:31 - INFO - List of ADB devices :
01/004/2014 00:04:31 - INFO - - CB5A1YAHWN
01/004/2014 00:04:31 - INFO - List of fastboot devices :
01/004/2014 00:04:31 - INFO - - none
And I could not unlock bootloader.
I have ticked the USB Debug yet my Z2 is not rooted yet.
Do I have to root it first?
May someone guide me how to unlock because I cannot finish it using the official way
It always keeps telling me "Waiting for device"
Thank you so much!
http://www.theandroidsoul.com/unlock-bootloader-on-sony-xperia-z2/
I followed this website.
Using method 1, I could not achieve step 4
Using method 2, when I type fastboot.exe -i 0x0fce getvar version
noting happened, it seemed to be saying "cannot find 0x0fce" or somthing else
I don't know why it keeps telling me no driver installed
I go to Device Manager of Windows and it shows it has the updated driver installed in the PC
I am using Win 8.1
http://forum.xda-developers.com/showthread.php?t=2635830
This thread will help alot
Press windowsKey + R
type/paste
Code:
shutdown -o -r -t 0
into the box, this will restart your machine in the advanced startup menu.
when it restarts choose "disable driver signing" Then install the driver manually using the "have disk" option. when you reboot again the driver should be working.
-------------------
I followed what it said but when is "when it restarts choose "disable driver signing" Then install the driver manually using the "have disk" option. "???
I could not find disable driver signing.
After entering the shutdown command, what button should I press? Thank you for replying! I wish I will be able to flash rom today
Not sure what to do then because i ran into the same issue but i just used a linux OS as a work around
Thanks for answering
I will try using Win Vista
I hope someone could teach me
hello everyone
device is SGP712 (unlocked bootloader , LineageOS 7.1.2 )
Flashtool is 0.9.23.2 (runing on linux debian)
sudo flashtool correctly sees the device connecting in either fastboot or flash mode. (no issues there , or so it seems)
objective: flash an ftf file made from an xperifirm download. (to revert to stock rom)
I select flashmode, then browse to the made ftf , I do not check any choice in wipe/exclude
leave the buffer at its default 512K
click on flash.
I get these two errors:
Code:
ERROR - (X10flash.java:735) - null
ERROR - (X10flash.java:736) - Error flashing. Aborted
(tried different ftf , same error)
activated DEBUG logging and i see the repetition of this patern:
Code:
DEBUG - (USBFlashLinux.java:57) - OUT : CommandID : 9 / Flags : false,true,false / Data length : 1 / Data CRC32 : EE 0E 61 2C
DEBUG - (USBFlashLinux.java:75) - Reading packet from phone
DEBUG - (USBFlashLinux.java:81) - IN : CommandID : 9 / Flags : false,false,false / Data length : 0 / Data CRC32 : 00 00 00 00
with each commandID the out is false,true,false and the in is false,false,false
data crc out is always different then data crc in
here is a pruned DEBUG log at the following url (can't post url as i'm rather new here)
http : // txt.do / dmoq3
anyhelp would be much appreciated.
You need https://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/
will give it a try and report here. thx for the pointer.
THANK YOU.
I used the aforementioned flashtool , selected latest firmware in list.
I have now an SGP712 with official android 7.1.1 and unlocked bootloader.
i can take it from here. thank you.
As this is an old post I found I too have the same issue. I have downloaded source code from github and made small changes to find out crc32 output but didnt understand what it does. Can i know how do you get that debug level information in console. Which flashtool you use and how do you get it. Also I tried flashtool by sony with no success. It doesn't recognize my device G3116 Sony xperia XA1.