Is it possible to completely Hard Brick the LG G2? - G2 General

I'm just wondering if you can completely Hard Brick a LG G2 to a point, where there is no revive possible.
I can purchase a cheap LG G2 international version, but the seller says that he broke it during flashing a Kernel.
Can you for example revive a phone,that had a Kernel from completely different phone flashed?
Any insight would be greatly appreciated.
Sent from my C6503 using Tapatalk 2

If it's true he only flashed a new kernel then u can restore it. If he messed with the partitions then.... No. If he used a broken usb cable and fried it....
Well ask to try the phone before u by it. Also check if it's stolen

Alright, I gathered some more information from the seller.
He tried updating TWRP, but he followed wrong instructions from some website.
He can´t enter Recovery or Download Mode on the Phone.
The Display is active, but only Backlight.
When he connects the Phone to his Computer, it shows multiple Mass Storages, but the LG Software doesn´t recognize it.
Is this a common problem, that is easy to fix, or should I rather wait for another Deal to come up.
p.s. I asked him for a receipt, and he says that he has one.

E-I-K-E said:
Alright, I gathered some more information from the seller.
He tried updating TWRP, but he followed wrong instructions from some website.
He can´t enter Recovery or Download Mode on the Phone.
The Display is active, but only Backlight.
When he connects the Phone to his Computer, it shows multiple Mass Storages, but the LG Software doesn´t recognize it.
Is this a common problem, that is easy to fix, or should I rather wait for another Deal to come up.
p.s. I asked him for a receipt, and he says that he has one.
Click to expand...
Click to collapse
If the guy was updating through TWRP, he probably have some knowledge on the matter, and the chances that he bricked it for good is high.
When I messed up my G2 a few times, being able to enter in download mode was the hint that the phone was revivable, if him really can't enter the download mode, then it is probably a bigger problem.
But the question is, by buying this possible lemon, how much will you be saving compared to buying a brand new?

If it's showing up like that, if you have a Linux machine you may be able to use dd to flash factory images to the partitions. There is a guide to it somewhere on here. But even if you were successful in flashing those, it really depends on how badly he screwed it up. In particular I really hope he didn't damage or wipe his efs. Or at least has it backed up.
Honestly, I'd point him to the right guides and have him fix it. If he screwed up his efs, or messed the partitions up, or fried something, it's dead and not coming back. If all he did was flash a kernel in twrp and it was actually from this phone and it was just a bad download or flash or something, then you'd probably be okay, but if that were the case you'd get a secure boot error and still be able to enter download mode. Personally, I would not buy a phone that won't boot, especially if the seller isn't even sure what's wrong with it.
Sent from my LG-G2 using Tapatalk

sounds recoverable, if there is a backlight and mass storage comes up that's good, you can dd partitions with linux
no backlight + no recognizable usb device at all = bricked
still, buy at your own risk

It is.. i just did by flashing a broken rom.. sent it to the repair center and they replaced the motherboard

Right, I asked him if the Device shows as qhsusb_bulk in device Manager, and it does.
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
I´m really unsure what to do, I can save like 150€ by buying the broken G2, but well . . . I dont know if I can fix it.
Another problem is, that I have not a single clue on how to operate Linux/Ubuntu, and the only real fix requires either of those

E-I-K-E said:
Right, I asked him if the Device shows as qhsusb_bulk in device Manager, and it does.
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
I´m really unsure what to do, I can save like 150€ by buying the broken G2, but well . . . I dont know if I can fix it.
Another problem is, that I have not a single clue on how to operate Linux/Ubuntu, and the only real fix requires either of those
Click to expand...
Click to collapse
Just look up a guide on how to install an Ubuntu virtual machine. You should be able to connect your G2 to that virtual if you let it capture the USB port. If you can get it cheap, buy it and try to negotiate so you might have a chance on selling it for higher later on if you can't fix it. To me though, it sounds quite fixable, I would go for it.

E-I-K-E said:
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
Click to expand...
Click to collapse
this doesn't really matter, when I was trying to mess with the bootloader and corrupted it a few times I've never had the LG logo, as long as it comes up as storage you can DD it - the only time its a true brick is with no backlight and no usb device
if theres no boot logo you probably need to DD the aboot in

dr87 said:
this doesn't really matter, when I was trying to mess with the bootloader and corrupted it a few times I've never had the LG logo, as long as it comes up as storage you can DD it - the only time its a true brick is with no backlight and no usb device
if theres no boot logo you probably need to DD the aboot in
Click to expand...
Click to collapse
This.. If you have bulk mode, you can fix it!

kewkie said:
It is.. i just did by flashing a broken rom.. sent it to the repair center and they replaced the motherboard
Click to expand...
Click to collapse
That's actually just killing a fly with a sledgehammer. 99.9999% sure you got a softbrick.
Sent from my Moto G using XDA Premium 4 mobile app

Savoca said:
That's actually just killing a fly with a sledgehammer. 99.9999% sure you got a softbrick.
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried 3 different laptops
1x windows 8.1 (with ubuntu)
1x window 7 x64
1x windows 7 x86
Reinstalled all drivers, tried everything, but i couldnt get any usb connection.
- Factory reset? Freeze
- Normal boot? Stuck at bootlogo
- Download mode? Stucking at the loading screen

E-I-K-E said:
Alright, I gathered some more information from the seller.
He tried updating TWRP, but he followed wrong instructions from some website.
He can´t enter Recovery or Download Mode on the Phone.
The Display is active, but only Backlight.
Click to expand...
Click to collapse
I had that problem when updating TWRP too. You have to be careful because these recoveries are only made for specific firmware versions. I cant remember how I fixed the issue after only being able to get a backlight on and no image, but I did fix it and my phone works fine. I do think you will need the TWRP files already on the phone to fix though, so you can somehow manage to flash back. They will need to be on the phone since you can push anything via ADB

E-I-K-E said:
Right, I asked him if the Device shows as qhsusb_bulk in device Manager, and it does.
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
I´m really unsure what to do, I can save like 150€ by buying the broken G2, but well . . . I dont know if I can fix it.
Another problem is, that I have not a single clue on how to operate Linux/Ubuntu, and the only real fix requires either of those
Click to expand...
Click to collapse
i've been in this bricked situation when i was trying the 4.4.2 update manually...completely bricked, could not get into download mode too...so gave it to the service centre which at first said the main board will have to be changed when recovering through software upgrade failed...next day i got the phone back as they managed to flash the software back on it...
does not end here...i tried to flash optimus g pro 2 rom through twrp and same thing happened again...but was lucky this time as i could enter download mode and flashed kdz to recover...

E-I-K-E said:
I'm just wondering if you can completely Hard Brick a LG G2 to a point, where there is no revive possible.
I can purchase a cheap LG G2 international version, but the seller says that he broke it during flashing a Kernel.
Can you for example revive a phone,that had a Kernel from completely different phone flashed?
Any insight would be greatly appreciated.
Sent from my C6503 using Tapatalk 2
Click to expand...
Click to collapse
And yes i truly believe that our device can be hard bricked like i did mine today.
I tried to compile a custom bootloader for G2 using Qualcom's sources and fraction of LK. But in doing so i left my phone in a quasi-state where it will not connect as a usb device coz it does not pass the bootloader (Although bootloader is working as it should). .
So the only two option remain here for me is
1. To send phone back to LG service center where they'll do idk what.
2. To use JTAG or short the ic (Wonder if it could be done ) i.e manually open the phone and boot into the primary bootloader(Qcom legacy BL).
See that's how you can hard brick ur phone the right way

fizzy177 said:
And yes i truly believe that our device can be hard bricked like i did mine today.
I tried to compile a custom bootloader for G2 using Qualcom's sources and fraction of LK. But in doing so i left my phone in a quasi-state where it will not connect as a usb device coz it does not pass the bootloader (Although bootloader is working as it should). .
So the only two option remain here for me is
1. To send phone back to LG service center where they'll do idk what.
2. To use JTAG or short the ic (Wonder if it could be done ) i.e manually open the phone and boot into the primary bootloader(Qcom legacy BL).
See that's how you can hard brick ur phone the right way
Click to expand...
Click to collapse
Your LK build wouldn't have matched the sbl1, anything other than LG's signed aboot wouldn't work.. /:
Sent from my Nexus 5 using XDA Premium 4 mobile app

Savoca said:
Your LK build wouldn't have matched the sbl1, anything other than LG's signed aboot wouldn't work.. /:
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
But it did work coz our bootloader enfoces the signature check not in the sbl.(Our Primary boot loader)
i'm sure of it because it tries to go to download option but freezes at initial stage.
had it been the case my device would've been detected as qucom_bulk device or so..
---------- Post added at 09:03 AM ---------- Previous post was at 08:58 AM ----------
kewkie said:
Tried 3 different laptops
1x windows 8.1 (with ubuntu)
1x window 7 x64
1x windows 7 x86
Reinstalled all drivers, tried everything, but i couldnt get any usb connection.
- Factory reset? Freeze
- Normal boot? Stuck at bootlogo
- Download mode? Stucking at the loading screen
Click to expand...
Click to collapse
You my dear friend are a victim of a curroupt bootloader seqence(NOT THE CoRRUPT BOOTLOADER) i.e
Your phone would start something like
1- EFI initialization ok
2-Primary Boot Load -ok
3-Vendor Boot Load -ok
4- Error unable to find proper boot sequence- system halted
So ur best options are the one that i've stated just above this thread.

My case. I root and flash custom recovery then apply OTA = medium brick. Download mode was not functioning, only recovery. To make matter worse, I flashed KK stock rom through ADB in recovery = super brick. Then I went to LG service center with poker face asked for reparation. They asked (confirm) whether your phone is rooted or not (they had already know though) and I just said like It is my sister's phone. Then they they open the phone and maybe directly format the sd card with some stuff. My phone is restored again afterward. In my opinion, software modification can always be repaired unless you fry your phone through overclock or overvolt.

ramabg said:
My case. I root and flash custom recovery then apply OTA = medium brick. Download mode was not functioning, only recovery. To make matter worse, I flashed KK stock rom through ADB in recovery = super brick. Then I went to LG service center with poker face asked for reparation. They asked (confirm) whether your phone is rooted or not (they had already know though) and I just said like It is my sister's phone. Then they they open the phone and maybe directly format the sd card with some stuff. My phone is restored again afterward. In my opinion, software modification can always be repaired unless you fry your phone through overclock or overvolt.
Click to expand...
Click to collapse
It's not a brick if it was restored... meh.

Related

[Q] LG Optimus L5 BIG PROBLEM

I bought LG Optimus L5 E610 few months but i rooted it just few days ago. After i rooted it i installed ROM Manager and installed CWM but my device was not in the lost so i selected LGE Optimus M+ (idk why). Then a friend of mine told me about the "cool app" Beats Audio Installer and i installed it. After i rebooted the phone the speaker started making crazy sounds. I read in the app's site that i have to install a ROM to restore the original sound driver. I decided to install the stock ROM from here http://forum.xda-developers.com/showthread.php?t=1790342 but when i tried to install it it asked me to boot in recovery mode and i accepted. After it restarted it showed this " Secure booting error! cause: boot certification verify. Now I want to restore it to its original state but i don't know how so please help me fast.
Read this, to install the correct CWM for your phone (you'll have to download the .img yourself):
http://forum.xda-developers.com/showthread.php?t=1827723
Then, boot to recovery & flash your fixes from there.
Alternatively, you can use the KDZ flasher to restore to pure stock.
(you'll have to download the .img yourself)
Click to expand...
Click to collapse
Where can i find this .img file?
Please help me i have an even bigger problem. I dont know what happened but when i turn my phone on now the LG logo appears and stays forever please help me because I dont know what to do .
And another question: If i cant repair it myself is it repairable at all?
niquici Crosskill
plomba97 said:
Please help me i have an even bigger problem. I dont know what happened but when i turn my phone on now the LG logo appears and stays forever please help me because I dont know what to do .
And another question: If i cant repair it myself is it repairable at all?
Click to expand...
Click to collapse
If you had made a nandroid backup... reboot into CWM and restore...
Omessy7 said:
If you had made a nandroid backup... reboot into CWM and restore...
Click to expand...
Click to collapse
I have a nandroid backup but as i said i have no recovery.
plomba97 said:
I have a nandroid backup but as i said i have no recovery.
Click to expand...
Click to collapse
Try connecting your phone to your computer and using ADB to flash a new recovery to your phone.
Sent from my SCH-I535 using xda premium
Can someone please tell me exactly what I have to do because I've already did enough on my own.
My problem is this:
1.My phone freezes on the LG logo.
2.I cant boot into recovery.
plomba97 said:
Can someone please tell me exactly what I have to do because I've already did enough on my own.
Click to expand...
Click to collapse
Use this to download your original firmware.
Use this guide to flash it with the KDZ updater.
When it's done, you'll be back to stock ROM, and all your data will be gone. Don't play with your computer or have anything else running, because if your computer freezes during the flash (or you remove your phone's battery) your phone will be hard-bricked.
If you would rather save your data & only flash CWM onto the recovery partition, you need to find & download the .img or .zip file of CWM which was made for your phone, then flash it using Android Flash Recovery.
post-mortem said:
Use this to download your original firmware.
Use this guide to flash it with the KDZ updater.
When it's done, you'll be back to stock ROM, and all your data will be gone. Don't play with your computer or have anything else running, because if your computer freezes during the flash (or you remove your phone's battery) your phone will be hard-bricked.
If you would rather save your data & only flash CWM onto the recovery partition, you need to find & download the .img or .zip file of CWM which was made for your phone, then flash it using Android Flash Recovery.
Click to expand...
Click to collapse
2 more question:
Can i use this tool if i cant boot my phone?
If i harbrick my phone what should i do?
plomba97 said:
1 more question:
If i harbrick my phone what should i do?
Click to expand...
Click to collapse
Build a brick wall with it. It's a brick.
Soft brick means it's recoverable. Hard brick can be sold for parts.
unttris always
plomba97 said:
1 more question:
If i harbrick my phone what should i do?
Click to expand...
Click to collapse
Buy a new phone...
plomba97 said:
2 more question:
Can i use this tool if i cant boot my phone?
If i harbrick my phone what should i do?
Click to expand...
Click to collapse
Yes the tool should work even if you can't boot your phone. If you hard bricked your phone you will need to use jtag to unbrick it.
shimp208 said:
Yes the tool should work even if you can't boot your phone. If you hard bricked your phone you will need to use jtag to unbrick it.
Click to expand...
Click to collapse
So u think my phone is soft bricked? I think i should send it to LG.
And what is jtag.
plomba97 said:
So u think my phone is soft bricked? I think i should send it to LG.
And what is jtag.
Click to expand...
Click to collapse
If you did something considered by them as illegal they wont fix it... (unlocking bootloader, custom ROM...)
plomba97 said:
So u think my phone is soft bricked? I think i should send it to LG.
And what is jtag.
Click to expand...
Click to collapse
If your phone is only soft bricked LG will easily be able to tell you rooted it and "installed unauthorized software" on your phone and they very likely won't honor your warranty or offer to fix it. JTAG essentially allows you to restore your phone to its original condition if you have a brick or some soft bricks. What they do is they take apart the back of the phone so they can access the JTAG pads, they then solder wires to the JTAG pads. Next when a connection had been established they hook up the wires to a riff box using a ribbon cable, they then attach a cable from the riff box to the computer. From here they use a special program called Riff Box JTAG manager, to resurrect your device (Restore bootloader, etc.). After that they flash the original firmware that came with your device and your phone should work again.
For more information on JTAG check out these links and video.
List of Places Where You can Unbrick your Phone (Scroll down to see the list)
JTAG Riff Box
Wikipedia article on the Joint Test Action Group (JTAG)
YouTube video of some guy demonstrating how to unbrick a Samsung Captivate
Hope this helps
shimp208 said:
If your phone is only soft bricked LG will easily be able to tell you rooted it and "installed unauthorized software" on your phone and they very likely won't honor your warranty or offer to fix it. JTAG essentially allows you to restore your phone to its original condition if you have a brick or some soft bricks. What they do is they take apart the back of the phone so they can access the JTAG pads, they then solder wires to the JTAG pads. Next when a connection had been established they hook up the wires to a riff box using a ribbon cable, they then attach a cable from the riff box to the computer. From here they use a special program called Riff Box JTAG manager, to resurrect your device (Restore bootloader, etc.). After that they flash the original firmware that came with your device and your phone should work again.
For more information on JTAG check out these links and video.
List of Places Where You can Unbrick your Phone (Scroll down to see the list)
JTAG Riff Box
Wikipedia article on the Joint Test Action Group (JTAG)
YouTube video of some guy demonstrating how to unbrick a Samsung Captivate
Hope this helps
Click to expand...
Click to collapse
So i have to harbrick my phone and then send it to LG?
plomba97 said:
So i have to harbrick my phone and then send it to LG?
Click to expand...
Click to collapse
Word of warning: Technically deliberating bricking your phone and getting an insurance replacement is fraud and is a federal offense. The right thing to do would be to bring it and attempt to explain your situation (Or you could play dumb, and maybe they'll help you again they won't be happy and you could be in trouble if they figure out your lying) there is a possibility they will fix it for a reasonable price. In the end you unfortunately might have to buy a new phone,
shimp208 said:
Word of warning: Technically deliberating bricking your phone and getting an insurance replacement is fraud and is a federal offense. The right thing to do would be to bring it and attempt to explain your situation (Or you could play dumb, and maybe they'll help you again they won't be happy and you could be in trouble if they figure out your lying) there is a possibility they will fix it for a reasonable price. In the end you unfortunately might have to buy a new phone,
Click to expand...
Click to collapse
Ok thank you. What i will do is send it to LG and if they say they wont repair it ill try to repair it myself.
plomba97 said:
Ok thank you. What i will do is send it to LG and if they say they wont repair it ill try to repair it myself.
Click to expand...
Click to collapse
Unless you know what your doing you could destroy your phone to the point of it being beyond unbrickable, if LG says they won't repair it for you look online for a local shop in your area that's reputable and knows how to JTAG phones back to life.

Help phone is super bricked!

I need help. My htc amaze 4g is rooted and I have s off and super cid and i was running on android revolution hd rom, an app by the name of root mobile odin pro was installed on my phone, it was attempting to create a dump file so that I could give it to the dev so that he could possibly make my cell phone compatible with the app. But now my phone will no longer power on, it does not charge, no led light, the battery is full, has sd card, no sim card. under device manager on windows 7 it comes up as QHSUSB DLOAD. Will not run into recovery mode when vol down and power button is held. Computer does not recognize it. Can not run adb in cmd prompt, no reboot command works because device can not be found. I've tried to do everything on unlimited io page to no avail. When I do connect the phone to the PC it does make a sound to inform me that I just connected it. But the screen remains black and the light remains off.
I am using the UNBRICK PROJECT THAT IS ON http://forum.xda-developers.com/showthread.php?p=25501116
I AM ON UBUNTU BUT WHEN I TYPE IN
./brickdetect.sh
INTO THE TERMINAL IT DOES NOT DETECT MY DEVICE
Please help!
Sincerely,
Desperate Soul
Can you boot into fastboot? Battery pull, replace and Vol Down + Power
I can't
Double0EK said:
Can you boot into fastboot? Battery pull, replace and Vol Down + Power
Click to expand...
Click to collapse
No I can not
what recovery? and have you tried a different battery?
my recovery is...
andy55 said:
what recovery? and have you tried a different battery?
Click to expand...
Click to collapse
Recovery: 4ext
and my bf has the same phone, I tried his full battery, no response, when plugged in no led light to confirm it's charging.
jlnive said:
I need help. My htc amaze 4g is rooted and I have s off and super cid and i was running on android revolution hd rom, an app by the name of root mobile odin pro was installed on my phone, it was attempting to create a dump file so that I could give it to the dev so that he could possibly make my cell phone compatible with the app. But now my phone will no longer power on, it does not charge, no led light, the battery is full, has sd card, no sim card. under device manager on windows 7 it comes up as QHSUSB DLOAD. Will not run into recovery mode when vol down and power button is held. Computer does not recognize it. Can not run adb in cmd prompt, no reboot command works because device can not be found. I've tried to do everything on unlimited io page to no avail.
I am using the UNBRICK PROJECT THAT IS ON http://forum.xda-developers.com/showthread.php?p=25501116
I AM ON UBUNTU BUT WHEN I TYPE IN
./brickdetect.sh
INTO THE TERMINAL IT DOES NOT DETECT MY DEVICE
Please help!
Sincerely,
Desperate Soul
Click to expand...
Click to collapse
What did you do with the app? Did you attempt to flash ANYTHING on the phone? Sounds like you did however and messed up with one of its internal partitions.
EDIT: I'm going to go ahead and say you bricked your phone. I just re-read and... Why would you install something meant for *SAMSUNG* phones, on a *HTC* phone? You messed up right there. The unbricking project only will unbrick HTC Amazes when they're bricked in a certain fashion. It specifically states that it is known to be working for "writesecureflag 3" type of bricks. You could try and see if it will work in your case, but it probably won't. More likely than not, with the app you used, you might have accidentally wiped a partition that would have been safe for samsung devices (but dangerous on HTC devices).
Like he said ^^^ anything odin is for Samsung... u now have a nice coaster
Sent from my Wicked Galaxy S III
devestated
Keylogger_0 said:
What did you do with the app? Did you attempt to flash ANYTHING on the phone? Sounds like you did however and messed up with one of its internal partitions.
EDIT: I'm going to go ahead and say you bricked your phone. I just re-read and... Why would you install something meant for *SAMSUNG* phones, on a *HTC* phone? You messed up right there. The unbricking project only will unbrick HTC Amazes when they're bricked in a certain fashion. It specifically states that it is known to be working for "writesecureflag 3" type of bricks. You could try and see if it will work in your case, but it probably won't. More likely than not, with the app you used, you might have accidentally wiped a partition that would have been safe for samsung devices (but dangerous on HTC devices).
Click to expand...
Click to collapse
*** I am so devastated, my cell phone was so valuable to me. Can't believe I was so senseless to make such an error as this. The app was for Samsung but the app said it could create a dump file so that my device would become compatible . But that sounds so stupid to me now . A little too late. I'm so sad. I wish there was some way to fix it. Wish there was a USB jig for HTC's.
IF YOU KNOW OF ANYTHING, ABSOLUTELY ANYTHING THAT MAY HELP PLEASE LET ME KNOW!!!!!!!
(Thank you for all the reply's)
IT happens
Hey it happens, that how we learn thing sometimes, and sometime it can cost us. You could try these things
1) See if it can be JTAGed (cheapest possibility)
2) If it's still under warranty (which it probably isn't) send it off, and say it wouldn't power on after a update.
3) Find a Amaze with a broken or cracked screen, and replace the motherboard yourself.
That's all I can think of. Good luck

Restore partitions of phone? Bricked?!

Hello I need a way to restore the phones partitions. Like boot and recovery and u-boot and x-boot and system and cache and data and all the others. The phone has no known partitions. And because of that I am unable to flash my phone back to a working state. I have tried in fastboot to run OEM format. But it failed. If there is something I can flash in a .bin or a kdz I can flash it in software mode. Or if there is a way to do it in fastboot mode I can also do that. But those are the only two things my phone can do right now. And worse is each time I enter either fastboot or software download mode it will only stay on and active for about 2 minutes until the phone shuts off. And I have to start over completely. So I can flash a whole kdz or bin as they take too long. Please help me?!
Sent from my Note II
theshamrockking said:
Hello I need a way to restore the phones partitions. Like boot and recovery and u-boot and x-boot and system and cache and data and all the others. The phone has no known partitions. And because of that I am unable to flash my phone back to a working state. I have tried in fastboot to run OEM format. But it failed. If there is something I can flash in a .bin or a kdz I can flash it in software mode. Or if there is a way to do it in fastboot mode I can also do that. But those are the only two things my phone can do right now. And worse is each time I enter either fastboot or software download mode it will only stay on and active for about 2 minutes until the phone shuts off. And I have to start over completely. So I can flash a whole kdz or bin as they take too long. Please help me?!
Sent from my Note II
Click to expand...
Click to collapse
Are you getting an error of "Remote Partition Doesn't Exist"? If so that usually means you have a hardware problem.
Try this -
http://forum.xda-developers.com/showthread.php?t=2546571
Yes that is what it says.
Sent from my Note II
I am not sure how to do a lelus method. Unless his method is the omap4boot thing normally called fastboot? If so I have done that. If not can you explain how I can do the lelus method?
Sent from my Note II
theshamrockking said:
I am not sure how to do a lelus method. Unless his method is the omap4boot thing normally called fastboot? If so I have done that. If not can you explain how I can do the lelus method?
Sent from my Note II
Click to expand...
Click to collapse
Yeah the lelus method is for fastboot... Did you install the drivers on your PC twice? You have to run the lelus script 2 times to get it to actually work.
You might also want to look at this thread - http://forum.xda-developers.com/showthread.php?t=2585161
I do believe i did the driver correctly and iv done the flashing of the lelus script like 60 times lol
Sent from my Note II
Thanks I'll try this and report back. But I do think I have a hardware issue but it still trys to work so I want to try and fix it lol
Sent from my Note II
theshamrockking said:
Thanks I'll try this and report back. But I do think I have a hardware issue but it still trys to work so I want to try and fix it lol
Sent from my Note II
Click to expand...
Click to collapse
Im pretty sure it's a hardware problem but, Exactly... It's definitely worth trying to fix it.
I got a remote partition does not exist on every count. For the erase commands and for the write commands. So does that mean im **** out of luck? I keep thinking since i can get into fastboot and software mode i should be able to do something but yet nothing is working.
Is there any way to use the omap4boot to send the infor to the phone? Since i cant send the phone into fastboot or software mode without omap4boot it seems to show that that program gets the phone into a more working state maybe it can also do the flashing? or a script to keep the phone in the software mode for longer than 2 minutes?
theshamrockking said:
Is there any way to use the omap4boot to send the infor to the phone? Since i cant send the phone into fastboot or software mode without omap4boot it seems to show that that program gets the phone into a more working state maybe it can also do the flashing? or a script to keep the phone in the software mode for longer than 2 minutes?
Click to expand...
Click to collapse
Unfortunately I think the EMMC is fried...
If you can figure out how to adapt this method and get it to work on the L9 this is probably your only hope -
http://forum.cyanogenmod.com/topic/71825-hard-brick-to-hell-and-back-guide-to-recovery/
Other than that you could try taking it to a service center and having them try an OctopusBox to repair it or go where you bought it and try to make a warrant claim.
I know it sucks but I think these are your only real options. I'm not sure about were you live but I can buy a brand new L9 right now for $30 from MetroPCS.
Ouch. And it does look promising the link you provided just not sure if I will be able to make it work for my phone model. But I'm going to look into it. Looks like only one thing might be device specific that I don't already have and may have to make or find someone to make for my phone.
Sent from my Note II
theshamrockking said:
Ouch. And it does look promising the link you provided just not sure if I will be able to make it work for my phone model. But I'm going to look into it. Looks like only one thing might be device specific that I don't already have and may have to make or find someone to make for my phone.
Sent from my Note II
Click to expand...
Click to collapse
I have exact same problem. Only have to fix partitions is by Omap flasher. But we need to port the memory configuration for it. People have done it for galaxy Nexus (Tuna ) and galaxy tab. Omap flasher is the last hope in this phone.
Or
Hardware way would be flashing emmc using Z3X easy JTAG box.
er.davinder said:
I have exact same problem. Only have to fix partitions is by Omap flasher. But we need to port the memory configuration for it. People have done it for galaxy Nexus (Tuna ) and galaxy tab. Omap flasher is the last hope in this phone.
Or
Hardware way would be flashing emmc using Z3X easy JTAG box.
Click to expand...
Click to collapse
I still have the phone and it's still in the same condition. I was never able to get it working I gave up probably the next days as I had spent like a week on it already I had decided it's probably just a brick. I have no idea where or what I was doing with it at that time tho. I know I was only very slightly ever able to see that it wasn't completely bricked like some program was able to see it when connected to the PC. But no lights on the device no nothing. So I have no clue how to fix it.
Sent from my SM-N910T using Tapatalk

Bricked Tmobile lg-k7

Hello Everyone,
I have a questions and hopefully some one can help me out here. My son has bricked my phone and I believe it is a soft brick... could be wrong. However, I need to find away too unbrick it.
I can get into hard reset with out issues. however with everything I do, I can't get into recovery what's so ever. The phone just hangs at the loading screen. I have talked to my son in order to find out what he did and this is exactly what he told me
He installed king root and attempted to replace-kinguser-with-supersu. However when he installed the application, it asked to reboot the phone. Well he rebooted the phone and now it is stuck at the loading screen and wont go any further than that. He also told me that he did not remove kingroot prior too the reboot. Please help! as I need my phone for work.
I am out of options on what too do. I would post the guide he used but I am limited due too the spamming regulations of the board.
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Lunarman01 said:
Any one have an idea on how to unsoft brick this phone? I am all out of options as the only two options I have are hard boot and download mode.
Click to expand...
Click to collapse
According to the good people here on this thread http://forum.xda-developers.com/general/general/qa-metro-pcs-lg-k7-lgms330-t3331678 there is only a paid solution at the moment.
http://lg-firmware-rom.com/download...330-dll-for-lg-up-unbrick-lg-k330-with-lg-up/
if it is a lg k7 k330 (tmo) i followed this guide http://www.repairshopusa.com/phone/lg-k7-k330-unbrick-method/
Thank you for the information. However the lgup application does not recognize my phone. Indicates that the model is "Unknown"
Guess i am out of luck lol
Not uncommon. Sometimes you need to unplug and replug the device back in or close and reopen the program.
Thank you for the information. Does the USB debugging option need to be enabled because if it does, I don't think it is as the my computer does not recognize my device at all. Under computer, it shows as k7. However when I got into the device manager it indicated "LGE Android MTP device".
No. USB Debugging only works while booted into the system or recovery. You must be in Download Mode for the LG Up tool.
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Lunarman01 said:
At this time, I am really frustrated as nothing is currently working at this time. Possibly because the phone just went under a hard reset. I have changed the port too 41 and ran the flash tool and that was not able too pick up my phone either. Also, I can't seem to get the lgup to work correctly as it's still not working correctly.
I have uninstalled the applications belonging too lg, rebooted and then reinstalled them and I still get the same thing. I have attached screen shots below. lgup does indicate the firmware I need, however I can't get too it lol
Click to expand...
Click to collapse
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
es0tericcha0s said:
If I remember right, you have to make it search for *.kdz otherwise it's looking for .tot files, which is why it's probably not seeing the firmware you need.
Click to expand...
Click to collapse
Yes you are correct. However the file that I have downloaded from the link below doesn't actually provide you with a kdz file. The file provided you the files that have been extracted from the kdz file, which are the (LGK330.dz) file
Ah, weird. Never worked on an LG that didn't use .tot, .kdz, or .bin files. I guess just search for *.dz and it should load according to the link the other guy put up.
peteypete206 said:
Message me I can fix your phone
Sent from my LG-K330 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Lunarman01 said:
Thank you peteypete206. You have really save my phone. This issue has been resolved.
Click to expand...
Click to collapse
i'm having same problem in device manager , LGE android mtp device (yellow triangle with exclamation) & LGUP says device unknown.
The phone is able to go in download mode. any help will be appreciated.
I have a hard bricked k7 (k330) CHIPSET MSM8909 qdload 9008 with no partition, the solution I found here was for LG G2 & G3 because the diag program has those chipsets, please I need help with this
peteypete206 said:
Message me I can fix your phone
Click to expand...
Click to collapse
How's it going man, I need your help I have a ms330 stuck in 9008 mode with an unlocked bootloader. Everything I've tried has failed and I'm stuck. I only owned this phone for 6hrs before I screwed it up any help will be appreciated!!

How To Remove Root or Unbrick LG K20 PLUS (Metro PCS)

Steps:
1. Turn Off Any Virus Protection Software
2. Download MP26010j_00_0316.kdz To Flash Your Phone Back To Stock
3. Install LGMobileDriver_WHQL_Ver_4.2.0.exe
4. Next Install LGUP_Store_Frame_Ver_1_14_3.msi
5. Make Sure That You Have Your Phone Connected (Take Battery Out Then Put It Back In Hold Volume Up And Connect With Micro USB) So LGUP Can Be Able To Recognize It
6. Then Double Click UPPERCUT.exe to open up LGUP Now But Only Thing Is That Uppercut will try to verify just ignore and if it doesn't open up just open lgup from desktop and its going to view phone as unknown
7. Unplug Phone But Keep LG Download Mode On And Exit LGUP
8. Open LGUP First And Then Connect Phone Which Should Recognize Phone As MP260
9. Click Upgrade, Make Sure That Bin Is Checked And Select File MP26010j_00_0316.kdz To Flash And Click Start
10. Your Done! Video Coming Soon
Links: https://mega.nz/#!EZcURRSD!NF_5MU4dJUpTknRcPMQWFVoYo4ePsGkoA0ndkkzVsmI https://mega.nz/#!dFNWFZZa!Rl3P7tJs7J51TtjcnaLwR3RHgGdRSco8NcJ9yog86J0 https://mega.nz/#!oVNSnYTB!3y9-P4t_8P-lj5sCXhFjO0R8J3j4Z_US-XCjVGysgEI https://mega.nz/#!pAUgGAwC!j5d3C8pUdQR5XMpqWBgLDu2O3tE99yWNa2nwXud3OSo
The Only Thing Im Disappointed Is That Every Time You Reboot Phone or Turn It On It Keeps Saying Lock Bootloader But Just Press The Power Button To Continue Repeating The Process Does Not Remove That Message
I Made This Tutorial For Some People That Have Trouble With Apps That Detect Root
Phone dont turn on at all
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great ​
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
shaneg79 said:
fyi u can get rid of the bootloader bootup annoyance by following the unlock bootloader instructions but instead of typing fastboot oem unlock type fastboot oem lock
Click to expand...
Click to collapse
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
New Optimus said:
If you lock the bootloader if you have custom recovery (twrp) and superuser you will not be able to boot
Click to expand...
Click to collapse
Correct but this thread was about removing root
shaneg79 said:
Correct but this thread was about removing root
Click to expand...
Click to collapse
ah, I thought that was in the original post or implied if completely unrooting.
New Optimus said:
Just a Heads up there is a new version out, as of 9/01/17
MP26010r_00_0817.kdz
download link
https://lg-firmwares.com/lg-mp260-firmwares/
Click to expand...
Click to collapse
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
meazz1 said:
Any link for the T-mobile variant?
I looked all over and reached the end of internet but couldn't find , lol!
Click to expand...
Click to collapse
Here
kc6wke said:
Here
Click to expand...
Click to collapse
Thanks
meazz1 said:
Thanks
Click to expand...
Click to collapse
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
meazz1 said:
Looked and saw two links for the newest kdz. I'm in the USA so TMO =north america.
But I 'm curios what TMI stands for, no info on that page of region listings.
Click to expand...
Click to collapse
Not sure about TMI, use TMO North America
I figured I'd post this here to, because I am thinking about getting this phone. It's $99 at metro pcs right now, that's really hard to pass up.
In a twrp+root thread there are some that cannot get root, with the last LG firmware update, so I'm guessing this is a soft brick as apposed to a hard brick.
So, had a question.
If in the case of the like 10% of the people that do this root, the phone won't root or bricks, if I get this phone and and that happens, is it possible to flash the phone via the LG program, with a KDZ file and go back to stock like in this thread? If so I will probably buy this phone tomorrow (crosses fingers the kdz trick will work)
From looking at the videos, it looks as if the LG program is similar to the Samsung Odin program as far as flashing goes, am I correct in this?
...
Sent from my [device_name] using XDA-Developers Legacy app
I know this thread has not been active for a while. However I have a Metro LG K20 Plus phone and want to change the firmware to T-Mobile. I have not been successful doing this as I always get invalid firmware, because LG UP recognizes the phone as a metro phone. Is there a way to succeed in getting the T-Mobile firmware on the phone?
thanks in advance.
Stoner101 said:
yesterday i rooted my k20 mp260 then this morning i wanted to revert back to stock and no root, i tried to unroot it but i didnt follow this cause i didnt find it til now,but i got rid of root and then i tried to update via ota and it went into twrp and then it was installing until it just went black, like it shut off now it doesnt power on. when i plug it in to pc it finds it but it cant install the driver. any help to try to Resurrect from the grave would be great ​
Click to expand...
Click to collapse
Did you find any answers to this? I have one that is bricked. It will not show up when connected to a computer at all
Virus warning from Avira in Uppercut
lg k20 plus soft bricked?
So I've searched high and low and have tried suggestion after suggestion with no avail. To start things off, I have a soft bricked LG k20 plus. Everything was working fine until the other day when I went to flash a kernel, and when the phone restarted, the screen was a dark grey/black color. I rooted the devices using massis method, removed SU and then rooted using Magisk. Like I said everything was working fine and for whatever reason I decided to try a different kernel. That's when it all went downhill. So now when I turn the phone on, the screen is still blank but it vibrates. When I've connected it to a computer, on my Mac it doesn't show up with ADB or FASTBOOT but in my device tree it comes up as LGE Android device. I borrowed my friends laptop since it runs windows, and my Mac is a dinosaur. ADB doesn't pick it up either, but in a USB hub it says the same thing, LGE Android device and lower down it comes up as TP-LINK. Now tryin to use LG Flash tools doesn't work, LGUP doesn't see my device, and when I tried to extract the KZD file, when I go to select it from the list there is no file to choose. Since I can't see anything on my screen, I can't tell if I'm in download mode, bootloader, etc, but in my device tree sometimes my phone will pop up an bootloader interface and I can use fastboot commands. When I was last able to see my screen, yes, USB debugging was on, I had a recovery, but since I can't see anything on my screen I can't seem to boot into recovery. If I could I would wipe cache and all. I think I may have read too many article and suggestions as to what to do because nothing seems to be working, and don't seem to find anything else related closely enough to my issue. Anyone have a clue as to where I should start? I'll have to give my friend back her laptop soon, and since my mac is so old, and the whole PC vs Mac feud, my computer won't be of much help. Any advice my hair strands would greatly appreciate before they rest are pulled out lol

Categories

Resources