Related
i have unlocked bootloader.
but pc don't recognize now the devices
when i try to flash recovery in fastboot mode( starting fastboot protocol ) it say : waiting for device..
but the drivers is installed on the pc "mot single ADB interface"
please help me!!!!
Did you enter to fastboot mode? I'm not 100% sure but the only way to use fastboot is to go to fastboot mode.
Sent from Motorola Atrix
do you have the correct drivers form moto? i think you need them to use fastboot. (had the same issue)
Are you using moto-fastboot?
http://forum.xda-developers.com/showthread.php?t=1138092
If not, and you are only trying to fastboot a small partition (not system or webtop) you can still use some older fastboot, but you might have to type
fastboot -i 0x22b8
But best is to try with moto-fastboot...
its not working for me even with moto fastboot
teddy du 84 said:
its not working for me even with moto fastboot
Click to expand...
Click to collapse
Do fastboot devices
Does it say anything?
Sent from my ATRIX HD using XDA Free mobile app
Not to open a new topic,
I tried to install the 4.2 version over team win recovery 2.1.1 , and when he had finished and rebooted the phone appeared to me that the phone will not turn on. When I go to the android recovery, again, I switched to team win recovery? Any solution? Sory for my bad english.
JoseZizu said:
Not to open a new topic,
I tried to install the 4.2 version over team win recovery 2.1.1 , and when he had finished and rebooted the phone appeared to me that the phone will not turn on. When I go to the android recovery, again, I switched to team win recovery? Any solution? Sory for my bad english.
Click to expand...
Click to collapse
Flash cwm and try again
Sent from my ATRIX HD using XDA Free mobile app
palmbeach05 said:
Flash cwm and try again
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
Ok, thank you
edit: whether there somewhere a tutorial how to do that?
JoseZizu said:
Ok, thank you
edit: whether there somewhere a tutorial how to do that?
Click to expand...
Click to collapse
Did you check the general section? Most, if not all, guides are there.
Sent from my ATRIX HD using XDA Free mobile app
palmbeach05 said:
Did you check the general section? Most, if not all, guides are there.
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
I have found
JoseZizu said:
I have found
Click to expand...
Click to collapse
Use the guide to flash cwm to your device
Sent from my ATRIX HD using XDA Free mobile app
I have found, please help
JoseZizu said:
I have found, please help
Click to expand...
Click to collapse
I just told you what to do. Unless you want me to copy and paste the instructions on how to flash cwm from the threads i told you to go read, i am unable to help. Flash cwm is a very simple instruction. If you can't do that, you should not be trying to flash a custom recovery
Sent from my ATRIX HD using XDA Free mobile app
I installed olympus 4.4, and when to run the system stands we just motorola logo
what's the problem?
JoseZizu said:
I installed olympus 4.4, and when to run the system stands we just motorola logo
what's the problem?
Click to expand...
Click to collapse
Which version did you flash? Did you flash the correct recovery?
Sent from my ATRIX HD using XDA Free mobile app
palmbeach05 said:
Which version did you flash? Did you flash the correct recovery?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
2.5 version
JoseZizu said:
2.5 version
Click to expand...
Click to collapse
Flash the v3m release
Sent from my ATRIX HD using XDA Free mobile app
Hi,
This is the stock kernel with stock boot.img, just insecured.
I thought that it could be useful to someone else, here is the fastboot flashable boot.img
updated to Android 4.4.4 KTU84P
https://dl.dropboxusercontent.com/u/11344751/myboot-root.img
If you like it, please thanks button
I was looking for this before I started running different kernels. Thanks!
teknoraver said:
Hi,
This is the stock kernel with stock boot.img, just insecured.
I thought that it could be useful to someone else, here is the fastboot flashable boot.img
https://dl.dropboxusercontent.com/u/11344751/myboot-root.img
Click to expand...
Click to collapse
Thank you kindly
Sent from my Nexus 5 using Tapatalk
Thanks! Any chance we can get it in a flashable zip?
Sent from my Nexus 5 using XDA Premium 4 mobile app
What did you modify in the boot.img? I'm trying to find an insecure kernel for the Nexus 4 but I guess I might aswell make the changes myself.
damn, why all kernels are all secure now a days???
fritzhy said:
What did you modify in the boot.img? I'm trying to find an insecure kernel for the Nexus 4 but I guess I might aswell make the changes myself.
Click to expand...
Click to collapse
I had to recompile adbd in order to give a root shell.
My version will look for a custom "ro.teknoraver" property which I set in /default.prop
Sorry for this stupid question, but what is this Insecure ?
You can split a boot.img , change the ramdisk, if you wanted to .
Sent from my Nexus 5 using XDA Premium 4 mobile app
melbourne408 said:
You can split a boot.img , change the ramdisk, if you wanted to .
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's it, the kernel is stock
33bca said:
Sorry for this stupid question, but what is this Insecure ?
Click to expand...
Click to collapse
Insecure is when adb gives you a root shell
melophat said:
Thanks! Any chance we can get it in a flashable zip?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes but I don't see the point as fastboot is simpler
teknoraver said:
I had to recompile adbd in order to give a root shell.
My version will look for a custom "ro.teknoraver" property which I set in /default.prop
Click to expand...
Click to collapse
Oh alright... Any chance of you putting a small guide together? Would be completely awesome!
Would like to See a flashable zip too. Way simpler than USB cable etc etc and Fastboot? Just recovery and go? please?
flex420 said:
Would like to See a flashable zip too. Way simpler than USB cable etc etc and Fastboot? Just recovery and go? please?
Click to expand...
Click to collapse
Code:
adb reboot bootloader
fastboot flash boot myboot-root.img
That's all
adb reboot bootloader
fastboot flash boot myboot-root.img
I think people asking for stock kernel in flashable zip believe that fastboot commands are only easy when you have access to a PC with adb installed, whereas if a recovery flashable zip existed it is more convenient when you aren't near a pc
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I will try to make a flashable zip
paul_59 said:
adb reboot bootloader
fastboot flash boot myboot-root.img
I think people asking for stock kernel in flashable zip believe that fastboot commands are only easy when you have access to a PC with adb installed, whereas if a recovery flashable zip existed it is more convenient when you aren't near a pc
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I agree. I can't install anything on a work computer so a zip is handy and easier when one travels as I use a chromebook and not a PC.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
markwebb said:
paul_59 said:
adb reboot bootloader
fastboot flash boot myboot-root.img
I agree. I can't install anything on a work computer so a zip is handy and easier when one travels as I use a chromebook and not a PC.
Click to expand...
Click to collapse
This is what u need then to flash images:
https://play.google.com/store/apps/details?id=com.cgollner.flashify
Enviado desde mi Nexus 5 mediante Tapatalk
Click to expand...
Click to collapse
Click to expand...
Click to collapse
miguepereira77 said:
markwebb said:
paul_59 said:
This is what u need then to flash images:
https://play.google.com/store/apps/details?id=com.cgollner.flashify
Enviado desde mi Nexus 5 mediante Tapatalk
Click to expand...
Click to collapse
Thanks so much. I now seem to remember this app.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hello.
Well, first, i think i screwed my phone (Wiko Cink Five).
I was trying to get an unlock code for Huawei Ideos X3 and i acidentaly instaled the Huawei bootloader into my Wiko.
Now the phone don't goes further than "Wiko" beggining image.
It don't let me do the bootload nor recovery.
Anyone can help me?
OrdnaelAvlis said:
Hello.
Well, first, i think i screwed my phone (Wiko Cink Five).
I was trying to get an unlock code for Huawei Ideos X3 and i acidentaly instaled the Huawei bootloader into my Wiko.
Now the phone don't goes further than "Wiko" beggining image.
It don't let me do the bootload nor recovery.
Anyone can help me?
Click to expand...
Click to collapse
Use sp tools Nd flash the stock ROM
Sent from my Micromax A116 using XDA Premium 4 mobile app
jayadu said:
Use sp tools Nd flash the stock ROM
Sent from my Micromax A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you explain me how to do it?
Or at least give me the links please.
And thanks for your help.
OrdnaelAvlis said:
Can you explain me how to do it?
Or at least give me the links please.
And thanks for your help.
Click to expand...
Click to collapse
u can follow this tutorial...
http://forum.xda-developers.com/showthread.php?t=2308431
U can download the latest stock rom from http://www.moulnisky.com
edwardpage said:
u can follow this tutorial...
http://forum.xda-developers.com/showthread.php?t=2308431
U can download the latest stock rom from http://www.moulnisky.com
Click to expand...
Click to collapse
Thanks! It as been very helpfull!
My phone is fixed!
Thank you!
Hi, I'm using Honor 5X KII-L21 (Turkey). Software RR 5.8.3. I want to go back to Stock ROM (marshmallow) And I want to get official updates. But I do not know what to do. Please help.
@gopinaidu77
@clsA
Splitbreed said:
Hi, I'm using Honor 5X KII-L21 (Turkey). Software RR 5.8.3. I want to go back to Stock ROM (marshmallow) And I want to get official updates. But I do not know what to do. Please help.
@gopinaidu77
@clsA
Click to expand...
Click to collapse
Install stock recovery and then flash ur device update.app using dload method
gopinaidu77 said:
Install stock recovery and then flash ur device update.app using dload method
Click to expand...
Click to collapse
I tried this method with huawei extractor (boot system recovery img) But I was on the software install failed screen.
Splitbreed said:
I tried this method with huawei extractor (boot system recovery img) But I was on the software install failed screen.
Click to expand...
Click to collapse
Yes u can install the update.app directly
gopinaidu77 said:
Yes u can install the update.app directly
Click to expand...
Click to collapse
I just flash stock recovery?. And I using the dload method. Will it be installed without problems? And successful?
Splitbreed said:
I just flash stock recovery?. And I using the dload method. Will it be installed without problems? And successful?
Click to expand...
Click to collapse
Yes it does.
gopinaidu77 said:
Yes it does.
Click to expand...
Click to collapse
Thank you my friend. I want to try stock rom . Is performance normal? Still stable?
Sorry for my noob questions..
Splitbreed said:
Thank you my friend. I want to try stock rom . Is performance normal? Still stable?
Sorry for my noob questions..
Click to expand...
Click to collapse
Yes .. its stable and fast in when u set the device in performance mode
gopinaidu77 said:
Yes .. its stable and fast in when u set the device in performance mode
Click to expand...
Click to collapse
Thanks..
Splitbreed said:
Thanks..
Click to expand...
Click to collapse
My pleasure. And happy to help u .
So did it succeed OP?
Sent from my Honor 8 using XDA Labs
I have not tried it yet, my device Marshmallow software is available on huawei website. Is it possible to flash recovery in this software? So with the huawei extractor, can I flash the recovery part of the software on the site with adb?
Splitbreed said:
I have not tried it yet, my device Marshmallow software is available on huawei website. Is it possible to flash recovery in this software? So with the huawei extractor, can I flash the recovery part of the software on the site with adb?
Click to expand...
Click to collapse
Yes. Flash stock recovery first, then flash stock ROM through dload.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Yes. Flash stock recovery first, then flash stock ROM through dload.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
Huh, thanks friends.. I am trying
Splitbreed said:
Huh, thanks friends.. I am trying
Click to expand...
Click to collapse
Goodluck.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Goodluck.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
I flashed with success. But cust.img was not installed. (Command not allowed) System boot and recovery IMGs are installed. Im not see a problem. I use it on a normal now b320.. Cust is this a problem? And b320 is latest update?
Splitbreed said:
I flashed with success. But cust.img was not installed. (Command not allowed) System boot and recovery IMGs are installed. Im not see a problem. I use it on a normal now b320.. Cust is this a problem? And b320 is latest update?
Click to expand...
Click to collapse
That should not be problem. Please tel me the Cxxx version.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
That should not be problem. Please tel me the Cxxx version.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
How? where is cxxx?
Splitbreed said:
How? where is cxxx?
Click to expand...
Click to collapse
Give me a screenshot of about phone.
Sent from my Honor 8 using XDA Labs
Ok:
Someone help me please.. ...
I have successfully installed zip files of paranoid and gapps too but when i reboot the system it doesnt start the O.S. its just showing the oneplus logo only.
The powered by android is not showing and system is not starting.
So someplease help me to get out of here.
shakya.shu said:
Someone help me please.. ...
I have successfully installed zip files of paranoid and gapps too but when i reboot the system it doesnt start the O.S. its just showing the oneplus logo only.
The powered by android is not showing and system is not starting.
So someplease help me to get out of here.
Click to expand...
Click to collapse
Can u access recovery?
If nope check the thread for mega unbrick
Sent from my ONE E1003 using Tapatalk
shubham399 said:
Can u access recovery?
If nope check the thread for mega unbrick
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Yeah i can access recovery. ...bro
Nd oneplus logo is showing but nothing happen after it
shakya.shu said:
Yeah i can access recovery. ...bro
Nd oneplus logo is showing but nothing happen after it
Click to expand...
Click to collapse
Try flashing different rom then
Sent from my ONE E1003 using Tapatalk
Bro i tried but only paranoid rom has flashed properly.. ...
Other ones are failed to flash..
I really dont know wht to do.. .help me plzzz
shakya.shu said:
Bro i tried but only paranoid rom has flashed properly.. ...
Other ones are failed to flash..
I really dont know wht to do.. .help me plzzz
Click to expand...
Click to collapse
Are u using the lastest bootloader?
Flash lastest TWRP
Sent from my ONE E1003 using Tapatalk
Im using ver. 3.0.0
Nd i tried to flash 3.1 ver. It didnt flashed.. ..
lol
lol
lol
lol
lol
lol
shakya.shu said:
Im using ver. 3.0.0
Nd i tried to flash 3.1 ver. It didnt flashed.. ..
Click to expand...
Click to collapse
Flashed via Fastboot? Or via TWRP, "as image" , "recovery"?
What does "fastboot oem device-info" gives you?
Did you formatted all partitions ?
And do you have a Back up?
I dont have any backup.. ...
Nd how do i know that partition has deleted
shakya.shu said:
I dont have any backup.. ...
Nd how do i know that partition has deleted
Click to expand...
Click to collapse
When plugging to a computer and entering to the TWRP, it should mount in USB so you can copy your files (photos...).
Then, what about the other question about your bootloader and TWRP.
You can try to reflash on the version of PA that was here before the upgrade and see if it starts again...