SlimKat with "All-F2FS" support​
I have modified SlimKat to work with F2FS partitions. All credits for the ROM to SlimKat guys.
This is for "All-F2FS" that mean that /system, /cache and /data are formatted with F2FS.
This is needed to switch to "All-F2FS".
ROM contains my Kernel with "All-F2FS" support and other goodies.
Ported sl[aou]b from Linux 3.4
Ported timer and workqueue from Linux 3.4
Ported random from Linux 3.13-rc4
Ported rwsem from Linux 3.11
Kernel NEON Mode
Etc..Etc..
Added GPU OC (Franco way..)
Added Toggle for FSYNC
Revert CPU OC things (We don't need it and it was a bit dirty..)
One of the goodies of my kernel is that i was able to reclaim more 18MB of RAM for Android. As you can see in Settings we are now at 993MB.
MultiROM isn't supported as now because i need to patch it to work with "new" ram.
What is F2FS?
F2FS (Flash-Friendly File System) is a flash file system created by Kim Jaegeuk at Samsung for the Linux operating system kernel. The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
SlimKat 4.8: Here (New Kernel2)
SlimKat 4.6: Here (New Kernel)
SlimKat 4.4: Here
SlimKat 4.2: Here
SlimKat 4: Here
SlimKat 3.10: Here
SlimKat 3.8: Here
SlimKat 3.6: Here
You need a recovery with "All-F2FS" support. So..
To use this ROM read the instructions Here!
If you have problem with Xposed installation:
Ramer84015 said:
You can download the v2.5 beta 2 from here. After installing, click on Setting and then select "Install from Recovery" either the 2nd or 3rd choice.
Click to expand...
Click to collapse
Hope i dind't any errors writing this down. I personally tested this procedure.
Enjoy.
legolas93 said:
SlimKat with "All-F2FS" support​
I have modified SlimKat to work with F2FS partitions. All credits for the ROM to SlimKat guys.
This is for "All-F2FS" that mean that /system, /cache and /data are formatted with F2FS.
This is needed to switch to "All-F2FS".
Click to expand...
Click to collapse
Wonderful, can't wait to try it - thank you! Do you have any idea yet whether you'll have the time and/or inclination to keep up with future Slim builds?
dialmformostyn said:
Wonderful, can't wait to try it - thank you! Do you have any idea yet whether you'll have the time and/or inclination to keep up with future Slim builds?
Click to expand...
Click to collapse
Yes. Because Slim is my daily driver ROM!
legolas93 said:
Yes. Because Slim is my daily driver ROM!
Click to expand...
Click to collapse
Can you make a tilapia version pls? I also use slimkat and I would like to use the the new file system.
Sent from my Nexus 7 using XDA Premium 4 mobile app
doiutzu said:
Can you make a tilapia version pls? I also use slimkat and I would like to use the the new file system.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've been using SlimKAT as well on my tilapia. It seems that overall, tilapia has been left behind on most ROMs for the N7. I don't know how difficult it would be since as far as I know the only difference is the existence of a radio, but if you could do this for us that would be awesome!
Can u please modify the latest OMNI ROM nightly or can u at least point out exactly what needs to be modified if it isn't extremely complicated like changing 100s of lines of code in the source?
Sent from my Nexus 7 using Tapatalk
Is it possible that there is something wrong with the rom's zip file?
I'm asking since I've tried installing it on my grouper multiple times, and each time I got stuck at the Slimkat booting animation. When I downloaded the latest weekly from the Slimrom site and applied your kernel and the g-apps, everything worked fine.
doiutzu said:
Can you make a tilapia version pls? I also use slimkat and I would like to use the the new file system.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
BillyD325 said:
I've been using SlimKAT as well on my tilapia. It seems that overall, tilapia has been left behind on most ROMs for the N7. I don't know how difficult it would be since as far as I know the only difference is the existence of a radio, but if you could do this for us that would be awesome!
Click to expand...
Click to collapse
I will try something when i have some free time..Maybe i will contact one of you via pm for some tests..
bhu1 said:
Can u please modify the latest OMNI ROM nightly or can u at least point out exactly what needs to be modified if it isn't extremely complicated like changing 100s of lines of code in the source?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
See here.
Curunir said:
Is it possible that there is something wrong with the rom's zip file?
I'm asking since I've tried installing it on my grouper multiple times, and each time I got stuck at the Slimkat booting animation. When I downloaded the latest weekly from the Slimrom site and applied your kernel and the g-apps, everything worked fine.
Click to expand...
Click to collapse
I think that you didn't follow the instructions. Read them Otherwise let me know..
I installed the grouper version on my tilapia ( I couldn't wait) but I had a little problem flashing gapps. I couldn't flash full PA gapps because there wasn't enough space on the system partition. I usually use PA stock gapps with slim ROM. When I reverted to the previous file system with your zip( it worked, I tested it ) I flashed full PA gapps successfully.
Did you try to use art? For me it caused FC's.
Sent from my Nexus 7 using XDA Premium 4 mobile app
doiutzu said:
I installed the grouper version on my tilapia ( I couldn't wait) but I had a little problem flashing gapps. I couldn't flash full PA gapps because there wasn't enough space on the system partition. I usually use PA stock gapps with slim ROM. When I reverted to the previous file system with your zip( it worked, I tested it ) I flashed full PA gapps successfully.
Did you try to use art? For me it caused FC's.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm using Slim GApps that you can find here.
And i'm using ART without any problems :fingers-crossed: Try them!
(Thanks for testing the zip)
legolas93 said:
I'm using Slim GApps that you can find here.
And i'm using ART without any problems :fingers-crossed: Try them!
(Thanks for testing the zip)
Click to expand...
Click to collapse
I thought it could be gapps fault. I used PA modular mini. I love the Google launcher and slim gapps doesn't have it .
Sent from my Nexus 7 using XDA Premium 4 mobile app
[Deleted]
GApps post that was already answered right above mine. sorry.
doiutzu said:
I thought it could be gapps fault. I used PA modular mini. I love the Google launcher and slim gapps doesn't have it .
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Are you sure? I used Slim AIO GApps and i have Google launcher
Can you make it compatible with Paranoid Android 4.1?
free space available is 5.6 GB after fresh install :angel:
TarteMan said:
free space available is 5.6 GB after fresh install :angel:
Click to expand...
Click to collapse
8GB device I assume?
has anyone actually benchmarked the benefit? Is it really worth it? I already use Slim.. though wondering if i should bother with the conversion.,..
Sage said:
has anyone actually benchmarked the benefit? Is it really worth it? I already use Slim.. though wondering if i should bother with the conversion.,..
Click to expand...
Click to collapse
Im wondering this aswell. But its so new i may just test and see for myself
dialmformostyn said:
8GB device I assume?
Click to expand...
Click to collapse
yes, i said that because with other rom & stock rom, free space avalaible is 5.85 GB after fresh install, maybe it's caused by F2FS ?
---------- Post added at 09:19 AM ---------- Previous post was at 09:09 AM ----------
_-..zKiLLA..-_ said:
Im wondering this aswell. But its so new i may just test and see for myself
Click to expand...
Click to collapse
here quadrant score with ART ENABLED :
Awesome right ?
Without ART i got 5800
im gonna give this a go. Backing up to PC now. I'll report back for those with questions on performance.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT INFORMATIONS
Click to expand...
Click to collapse
We'll not support users and answer questions from users which:
- are running a custom kernel
- have flashed mods
- modified system files
- didn't follow our intructions word by word
- are unfriendly
Even if you tell us that your problem is not related to your custom kernel /mod / magic => WE DON'T CARE!
Your mod => your problem!
WIKI
Click to expand...
Click to collapse
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/N7100_Info
Known issues
Click to expand...
Click to collapse
http://wiki.cyanogenmod.org/w/Known_Issues_page_for_n7100
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 10.2 to your Galaxy Note 2, or coming from another ROM:
- Read the official wiki
- Flash the latest official ClockworkMod-Recovery
- Copy GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM10.2 ZIP to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Reboot
Upgrading from CyanogenMod 10.1:
- Read known issues ans FAQs
- Copy 4.3 GApps and CM10.2 ZIPs to your SDCard
- Boot into Recovery
- Flash CM10.2 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
DOWNLOADS
Click to expand...
Click to collapse
CM10.2 official nightly builds:
http://www.get.cm/?device=n7100
Google Apps:
http://goo.im/gapps
ClockworkMod-Recovery:
Heimdall: recovery-clockwork-touch-6.0.3.6-n7100.img
Heimdall Flash Tool:
Official website
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#n7100/cm10.2/next
TEAMHACKSUNG SUPPORT CHAT
Click to expand...
Click to collapse
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
SCREENSHOTS
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SUPPORT US
Click to expand...
Click to collapse
If you want to donate a few bucks for the work we're doing in our freetime:
Thanks to all donators!
But CM has turned back to 10.1 for today's nightly? Is someting too wrong to release even a nightly of 10.2?
whoa codeworkx thanks u r one of the best devs thanks for working on note 2
_delice_doluca_ said:
But CM has turned back to 10.1 for today's nightly? Is someting too wrong to release even a nightly of 10.2?
Click to expand...
Click to collapse
try to open your eyes.
cm-10.1-20130825-NIGHTLY-n7100.zip = official nightly
cm-10.2-20130824-EXPERIMENTAL-n7100.zip = testbuild
https://github.com/CyanogenMod/hudson/commit/c9665dca45f908310c677ee2090ffb8354247971
changed today!
So, if We wont a 10.2 we need to install a experimental.
rederik79 said:
So, if We wont a 10.2 we need to install a experimental.
Click to expand...
Click to collapse
flash the experimental or be patient and wait for tomorrow.
Sent from my One using xda app-developers app
Nice to see the official builds coming to our device, thanks to CM and all the folks that worked on the device tree and commits for all the hard & nice work.
Rom runs good! Some freezes after starting apps, but for now the best 4.3 build for now
Gesendet von meinem GT-N7100 mit Tapatalk 4
Downloading now. Great. I hope screen glitches are gone...
Very nice topic!
Thankyou for your work and interest on our device, I really appreciate all your work and efforts on making our device free from proprietary software!
@codeworkx any chance to see the "stuck recharge while powered off" bug fixed?
Last time (a week ago) that I tried a 10.1 nightly and 10.2 unofficial build, it was still here...
Can the experimental be updated through ota to nightly?
Sent from my GT-N7100 using Tapatalk 4
lu1gj3s said:
Can the experimental be updated through ota to nightly?
Sent from my GT-N7100 using Tapatalk 4
Click to expand...
Click to collapse
yes
Sent from my One using xda app-developers app
codeworkx said:
flash the experimental or be patient and wait for tomorrow.
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
Whats happening tomorrow may I ask? Every 4.3 rom ive on this note 2 have graphics glitches galore. How does this rom differ? Any changes made from the current cm10.2 based roms on here?
Sent from my GT-N7100 using XDA Premium 4 mobile app
shingers5 said:
Whats happening tomorrow may I ask? Every 4.3 rom ive on this note 2 have graphics glitches galore. How does this rom differ? Any changes made from the current cm10.2 based roms on here?
Click to expand...
Click to collapse
This Rom is official. :silly:
shingers5 said:
Whats happening tomorrow may I ask? Every 4.3 rom ive on this note 2 have graphics glitches galore. How does this rom differ? Any changes made from the current cm10.2 based roms on here?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You will have official graphics glitches!
Sent from my GT-N7100 using Tapatalk 4
play store crashes
what about play store?
isn't it supported at this moment?
theis82 said:
what about play store?
isn't it supported at this moment?
Click to expand...
Click to collapse
Offcourse Play Store is supported. You just need to flash Gapps 4.3 in order to get Play Store access.
Sent from my spaceship using my smile.
i flashed gapps 4.3 but play store always says not connected
Eeuwe said:
Offcourse Play Store is supported. You just need to flash Gapps 4.3 in order to get Play Store access.
Sent from my spaceship using my smile.
Click to expand...
Click to collapse
---------- Post added at 08:32 AM ---------- Previous post was at 08:24 AM ----------
reflashed and now it works....thx
theis82 said:
i flashed gapps 4.3 but play store always says not connected
Click to expand...
Click to collapse
I couldn't restore via titanium, but I switched to supersu and everything is good for now.
shingers5 said:
Whats happening tomorrow may I ask? Every 4.3 rom ive on this note 2 have graphics glitches galore. How does this rom differ? Any changes made from the current cm10.2 based roms on here?
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
every exynos4 device is having those glitches. we'll need new mali libraries. will probably happen in 2045.
#blamesamsung
#blamearm
Sent from my One using xda app-developers app
These ROMs are built using CM mako device and AK mako kernel sources. All builds are unofficial.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* All in One Rom [Core features from PA, AOKP and CM]
See the PAC-man ROM website for more details.
See the PAC-man review gerrit for merged changes between builds.
Or look at the PAC Changelog in the PAC console in settings.
Built straight from SlimKat sources with commits from a variety of different Sources/ROMS.
See the CandyKat website for more details.
Use the Sweetener Packs for some impressive mods.
Credits:
None go to me. I'm not a dev, I just learned to build here on XDA:
PAC-man ROMs
CandyKat ROMs
houst0nn
arcardinal
mathsz
zymphad
ronasimi
AK
and everyone else working hard on the LGOG
Bugs:
I use these as daily drivers. I can't code at all, so squashing bugs is tough. Let me know and I'll try.
Installation:
You have to have been on stock 4.1.2 or LGNPST'd to it or teenybined your RPM/TZ partitions. Search or ask if you don't know what that's about.
Do a nandroid backup
Wipe: data, system, cache, dalvik
Flash PAC-man ROM
Flash GApps
reboot
restore apps and app data using TB or your another backup application if desired
Downloads:
PAC-geeb 10/13/14
CandyKat-geeb 10/13/14
To flash I recommend using my TWRP 2.8.1 build.
I would use the BaNkS 4.4.4 minimal Gapps.
I use the AT&T Jellybean radio.
Kernels:
AK geeb kernels for CM and AOSP mako based ROMS:
AK.360.geeb-cm.zip
AK.360.geeb-aosp.zip
AK gee kernels:
AK.360.gee-cm.zip
AK.360.gee-aosp.zip
To maximize the capabilities of these kernels, flash:
UKM,
install the Synapse app from the playstore,
and remove or disable Trickstermod, Faux control, or any in-ROM kernel control apps and settings.
If WiFi doesn't work after flashing the kernel, try flashing the Revert_4.4.3_Wifi_Fix.zip. It may fix WiFi on 4.4.2 ROMs and 4.4.4 ROMs that don't have the updated mako WiFi drivers.
These kernels won't work on gproj or E970 official ROMs based on gproj device sources. Ask me, your ROM dev, or just about any other experienced member on here if you don't know about compatibility.
Disclaimer:
Use at your own risk. I'm a chemist not a developer. I've never even taken a computer course.
Sources:
ROM
Kernel
Device
vendor
Thanks and congrats on another rom.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Nice work. Thanks for bringing us more options. Loving the support for our OG's. Thanks again. :thumbup:
Sent from my LG Optimus G using xda app-developers app
DeathmonkeyGTX said:
Thanks and congrats on another rom.
Sent from my LG Optimus G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Since there's an official PAC E975 ROM, this was way easier than IceColdOG.
Abu Nazir said:
Nice work. Thanks for bringing us more options. Loving the support for our OG's. Thanks again. :thumbup:
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
It's all because of this thread:
http://forum.xda-developers.com/showthread.php?t=2372041
brothaedhung said:
It's all because of this thread:
http://forum.xda-developers.com/showthread.php?t=2372041
Click to expand...
Click to collapse
Thank you I think that topic caused a spark under everybody. There is a lot of 4.3 love for our lgog.
Sent from my Optimus G using xda app-developers app
Badddddddddasssssssss sorry this ROM is fabulous good work bro!
Sent from my Optimus G using xda app-developers app
Not sure it makes a difference but my baseband version says unknown but everything works, just wanted to let you know. Oh and equipment id also says unknown but I have no idea what that's even for. This ROM is great thank you for bringing it to ort device.
hey is autofocus working for JB radios workin in this rom?
danial.aw said:
hey is autofocus working for JB radios workin in this rom?
Click to expand...
Click to collapse
I don't know. I don't have a camera in mine.
New build. Resynced to sources. Should fix the Maritime bug, thanks to dvhexer. Download here.
Is PAC bloated? What's the difference between this and BeanStalk?
zymphad said:
Is PAC bloated? What's the difference between this and BeanStalk?
Click to expand...
Click to collapse
It seems pretty vanilla to me. I've never used Beanstalk so I can't compare.
zymphad said:
Is PAC bloated? What's the difference between this and BeanStalk?
Click to expand...
Click to collapse
They are both feature rich Roms. I wouldn't call either one vanilla...there are lots of things in both that are not in vanilla AOSP Roms. To me, it appears that Beanstalk uses CM and then modifies stuff, and PAC modifies from AOKP. I'm pretty much judging this from the layout of the system menu. Both are very feature loaded...similar but not identical feature sets. Beanstalk has a newer pie implementation. PAC has PAs per app DPI settings instead of using xposed for that.
Sent from my Transformer using Tapatalk 4 Beta
Hello, I tried this rom but miracast not working.
Is that on all the cm and aokp based roms.
I like this rom very much but i need miracast to work.
dandrumheller said:
They are both feature rich Roms. I wouldn't call either one vanilla...there are lots of things in both that are not in vanilla AOSP Roms. To me, it appears that Beanstalk uses CM and then modifies stuff, and PAC modifies from AOKP. I'm pretty much judging this from the layout of the system menu. Both are very feature loaded...similar but not identical feature sets. Beanstalk has a newer pie implementation. PAC has PAs per app DPI settings instead of using xposed for that.
Sent from my Transformer using Tapatalk 4 Beta
Click to expand...
Click to collapse
Good point. Maybe vanilla wasn't the best descriptor. I meant there wasn't much on top of the AOSPA/CM/AOKP features.
brothaedhung said:
Good point. Maybe vanilla wasn't the best descriptor. I meant there wasn't much on top of the AOSPA/CM/AOKP features.
Click to expand...
Click to collapse
Gotcha. Yep, I'd agree with that description.
From what I've seen, PACman, BeanStalk and RootBox are all pretty much different ways to "interpret" a hybrid of CM/AOKP/PA. The major stuff is pretty much all there in all of them, but each one has areas where the Dev prefers one implementation of something over another. It's really personal preference, I think, that determines which one is better for a given user.
Has anyone downloaded the 9-1 build? The filehost says 0 downloads for some reason.
brothaedhung said:
Has anyone downloaded the 9-1 build? The filehost says 0 downloads for some reason.
Click to expand...
Click to collapse
Yep. Grabbed it last night for a trial run.
Only glitch I ran into was weather panel not displaying correctly in notification panel, buy I had messed with clearing data for Google services framework and apparently broke GPS while doing so. More than likely I caused the problem.
Sent from my Optimus G using Tapatalk 4
I downloaded new build just have not flashed if just yet
Sent from my LG Optimus G using xda app-developers app
OmniROM with "All-F2FS" support​
I have modified OmniROM to work with F2FS partitions. All credits for the ROM to OmniROM guys.
This is for "All-F2FS" that mean that /system, /cache and /data are formatted with F2FS.
This is needed to switch to "All-F2FS".
ROM contains my Kernel with "All-F2FS" support and other goodies.
Ported sl[aou]b from Linux 3.4
Ported timer and workqueue from Linux 3.4
Ported random from Linux 3.13-rc4
Ported rwsem from Linux 3.11
Kernel NEON Mode
Etc..Etc..
Added GPU OC (Franco way..)
Added Toggle for FSYNC
Revert CPU OC things (We don't need it and it was a bit dirty..)
One of the goodies of my kernel is that i was able to reclaim more 18MB of RAM for Android. As you can see in Settings we are now at 993MB.
MultiROM isn't supported as now because i need to patch it to work with "new" ram.
What is F2FS?
F2FS (Flash-Friendly File System) is a flash file system created by Kim Jaegeuk at Samsung for the Linux operating system kernel. The motive for F2FS was to build a file system that from the start takes into account the characteristics of NAND flash memory-based storage devices (such as solid-state disks, eMMC, and SD cards), which are widely used in computer systems ranging from mobile devices to servers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
omni-4.4.2-20140329-grouper-NIGHTLY-F2FS: Here
omni-4.4.2-20140312-grouper-NIGHTLY-F2FS: Here
You need a recovery with "All-F2FS" support. So..
To use this ROM read the instructions Here!
Hope i dind't any errors writing this down. I personally tested this procedure.
Enjoy.
First thank you for the rom. Will you update this rom on a weekly basis?
Hey thanks. Will try it today when I get time. Will give feedback, hope u update it at least once every two weeks.
Sent from my Nexus 7 using Tapatalk
Wow.
Held off installing on my Sprint S4 but this looks like the perfect thing to try on my tablet. TYVM.
Can u pls upload somewhere? Media fire is so slow and that is when the download actually starts which it rarely does. Can u upload on g drive or anywhere better like zippyshare.
Sent from my Nexus 7 using Tapatalk
Hi, I have installed this rom and seems to work very fine. But I have only one problem. When i try to install Xposed Framework this message appears. This is related to Rom or SU problem? Thanks
Hey, just flashed the ROM. Followed the procedure point to point except I also flashed ur legokernel and superuser zip cause omni ROM isn't rooted from default and then I formatted everything. Now I rebooted and its stuck on Google logo.
Sent from my GT-I9000 using Tapatalk
Any chance we can get a AOSPAL all-f2fs build? It is the #1 smoothest fastest trouble free ROM I have ever tried on my N7. Please?
http://forum.xda-developers.com/showthread.php?t=2636893
Ya I'm hoping for a AOSPAL ALL-F2FS support as well. This is my current daily driver and might be the one I stick with. Its vary smooth, stable and fast. Also nicely customizable as well.
bhu1 said:
Hey, just flashed the ROM. Followed the procedure point to point except I also flashed ur legokernel and superuser zip cause omni ROM isn't rooted from default and then I formatted everything. Now I rebooted and its stuck on Google logo.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
this was an issue for me as well. i restored the stock nexus 7 software and tried starting from pretty much complete scratch. i'm afraid to reboot because of that, but will give it a shot.
on a related note, i've gotten a system message saying that there's an update for omni-4.4.2-20140313-grouper-NIGHTLY.zip
are updates to be turned off until there's an F2FS update available?
edit: just rebooted, everything rebooted nicely.
wiredout46 said:
are updates to be turned off until there's an F2FS update available?
Click to expand...
Click to collapse
Yes turn them off for now.
I discovered the problem with my procedure. I was using the gapps recommended by omni team that I use with the regular omni ROM, the ones from the PA gapps thread. Those were the problem. Also, Lego kernel isn't working with this ROM, N7 gets stuck on Google logo.
Edit: after a second series of flashes I have came to realise that actually the gapps were also the fine. Its the Lego Kernel that was messing things up. Tried the M-kernel f2fs and that also isn't working and is resulting in a freeze at Google logo. Now I am just gonna give up on kernels and just flash omni ROM, gapps and superusers.
Sent from my GT-I9000 using Tapatalk
bhu1 said:
I discovered the problem with my procedure. I was using the gapps recommended by omni team that I use with the regular omni ROM, the ones from the PA gapps thread. Those were the problem. Also, Lego kernel isn't working with this ROM, N7 gets stuck on Google logo.
Edit: after a second series of flashes I have came to realise that actually the gapps were also the fine. Its the Lego Kernel that was messing things up. Tried the M-kernel f2fs and that also isn't working and is resulting in a freeze at Google logo. Now I am just gonna give up on kernels and just flash omni ROM, gapps and superusers.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
same with xperience.
all i want is doubletap2wake:cyclops:
---------- Post added at 05:26 PM ---------- Previous post was at 05:00 PM ----------
gorneman said:
Hi, I have installed this rom and seems to work very fine. But I have only one problem. When i try to install Xposed Framework this message appears. This is related to Rom or SU problem? Thanks
Click to expand...
Click to collapse
in for an answer on this.
bhu1 said:
I discovered the problem with my procedure. I was using the gapps recommended by omni team that I use with the regular omni ROM, the ones from the PA gapps thread. Those were the problem. Also, Lego kernel isn't working with this ROM, N7 gets stuck on Google logo.
Edit: after a second series of flashes I have came to realise that actually the gapps were also the fine. Its the Lego Kernel that was messing things up. Tried the M-kernel f2fs and that also isn't working and is resulting in a freeze at Google logo. Now I am just gonna give up on kernels and just flash omni ROM, gapps and superusers.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
As has been said before legokernel and m-kernel and all the other kernels as far as I know are NOT ALL-F2FS supported yet. They are only F2FS on the data partition. This OmniROM will not work with those kernels until someone can modify them to work with ALL the partitions formatted to F2FS file system a.k.a ALL-F2FS. No one has done that yet...
Sent from my Nexus 7 using Tapatalk
I flashed rom with Pa Gapps and i am stuck at google screen also. Any advice?
Deleted
Thanks for the rom. Overall the n7 has become much snappier than it used to be. Is there anyway to revert the theme of the playstore back to the stock theme? I don't like it. Some texts are not readable
Sent from my Nexus 7 using Tapatalk
rlivin said:
I flashed rom with Pa Gapps and i am stuck at google screen also. Any advice?
Click to expand...
Click to collapse
i did the same and got the same result, flashed slim aio gapps and it worked perfectly fine.
Thanks for the rom, it is great!
smoother the stock omni rom
gorneman said:
Hi, I have installed this rom and seems to work very fine. But I have only one problem. When i try to install Xposed Framework this message appears. This is related to Rom or SU problem? Thanks
Click to expand...
Click to collapse
I've never had experience with this filesystem but have had similar messages when using inbuilt superuser on their ROMs.
I would suggest using the latest SuperSu as it's complaining it can't use the mount and copy commands which do need root.
Sent from my Nexus 7
Since I had the repo downloaded and I ported this to my Bionic I figured why not give the other OMAP4 boys a taste of this sweet ROM. I want to begin with I DO NOT OWN THIS DEVICE SO I CAN'T TEST BUGS. Now that that is clear, lol big thanks to @Bobcus Leper for testing the initial zip so that I can start building for Maserati.
Requirements:
-Half a brain
-A desire to have an awesome ROM
-The new SELINUX enabled SafeStrap by @stargo
-A XT912 Motorola Droid Razr for VERIZON
Screenshots (Click Link)
Downloads
ROM: Gdrive - XDA
Google Apps: PA GApps
Superuser: SuperSu Flashable (UPDATE-SuperSU-v2.45.zip - 30 Jan 2015)
Instructions
Install @stargo's safestrap 3.75(Safestrap-debug.apk)
Download: Rom, GApps (optional), and Flashable SuperSU (required for full root access)
Create a new rom slot, wiping old rom may not be enough
Install Rom, Gapps, and SuperSU, reboot
Working
Rom should install fine in Stock Rom Slot, but if install fails you may have to reflash Stock Firmware (RSD Lite)
HotSpot (wifi tethering)
Bugs
When turning Off Hotspot(wifi tethering), phone may reboot
Source
Kernel
Please note that this is for the Spyder NOT UMTS_Spyder......I will build for umts after I build Maserati. Lastly......enjoy!
XDA:DevDB Information
Oct-L, ROM for the Motorola Droid RAZR
Contributors
Oggie7797, sd_shadow
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: New SafeStrap by Stargo
Based On: Cyanogenmod12
Version Information
Status: Beta
Current Beta Version: 1-12-15
Created 2015-01-13
Last Updated 2015-01-30
Reserved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Camera n wifii is working?
Sent from my XT912 using Tapatalk 2
naifaharsy said:
Camera n wifii is working?
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
I have no clue. @Bobcus Leper told me that it booted and that he would test more tomorrow. If you want to test just make a new rom slot and flash. This was built using CM12 device tree so it should have all of the working functionality of CM12.
Oggie7797 said:
I have no clue. @Bobcus Leper told me that it booted and that he would test more tomorrow. If you want to test just make a new rom slot and flash. This was built using CM12 device tree so it should have all of the working functionality of CM12.
Click to expand...
Click to collapse
Can i flash it upon cm12 20150109.
Haidersaleem said:
Can i flash it upon cm12 20150109.
Click to expand...
Click to collapse
If you wipe system, data, and both caches then yea. If you want to dirty flash though, be my guest just don't report bugs since every single dev requires a clean install if coming from another ROM.
One thing to mention, with any of the Team OctOs ROMs for Android 5 (A5), it will take quite a bit longer to flash than other A5 ROMs. To the point we specifically fixed the progress display. Be patient!
Grommish said:
One thing to mention, with any of the Team OctOs ROMs for Android 5 (A5), it will take quite a bit longer to flash than other A5 ROMs. To the point we specifically fixed the progress display. Be patient!
Click to expand...
Click to collapse
Yea CM12 takes like 5-10minutes to flash for us. And initial boots take ages especially since we use kexec..
Oggie7797 said:
Yea CM12 takes like 5-10minutes to flash for us. And initial boots take ages especially since we use kexec..
Click to expand...
Click to collapse
I meant TO Builds tend to take longer than regular CM12. CM12 uses a image-based system, and we prefer the individual files.
Any screenshots or features list? Will probably give this a shot tomorrow. Thanks!
Sent from my Nexus 10 using XDA Free mobile app
have any1 tried it?
Haidersaleem said:
have any1 tried it?
Click to expand...
Click to collapse
I have. I will test later. It seems to work just like CM12 with a few bonus features. So I'm assuming that almost everything works at this point.
Bobcus Leper said:
It seems to work just like CM12 with a few bonus features.
Click to expand...
Click to collapse
That's what I wanted to know,what difference is between CM12 and this rom?
Sent from my Razr XT910
welder73 said:
That's what I wanted to know,what difference is between CM12 and this rom?
Sent from my Razr XT910
Click to expand...
Click to collapse
It runs as smooth and is basically equal to @stargo's latest CM12 build. Since this ROM is built from CM source, expect the same bugs. The stock camera does work by default in this rom.
So, after an hour of testing, unless you want added features (color and statusbar customization) this ROM may be for you. If not, stick with CM12, because it is essentially the exact same ROM.
Bobcus Leper said:
It runs as smooth and is basically equal to @stargo's latest CM12 build. Since this ROM is built from CM source, expect the same bugs. The stock camera does work by default in this rom.
So, after an hour of testing, unless you want added features (color and statusbar customization) this ROM may be for you. If not, stick with CM12, because it is essentially the exact same ROM.
Click to expand...
Click to collapse
Gapps for this ROM.
Haidersaleem said:
Gapps for this ROM.
Click to expand...
Click to collapse
Out of curiosity are you new to flashing ROMs? Google for pa gapps and grab the lollipop version.
@Bobcus Leper I need to get a spyder lol way more users than targa
Sent from my XT875 using XDA Free mobile app
Oggie7797 said:
Out of curiosity are you new to flashing ROMs? Google for pa gapps and grab the lollipop version.
@Bobcus Leper I need to get a spyder lol way more users than targa
Sent from my XT875 using XDA Free mobile app
Click to expand...
Click to collapse
First I flashed gapps but not worked 2nd time worked.
Oggie7797 said:
Out of curiosity are you new to flashing ROMs? Google for pa gapps and grab the lollipop version.
@Bobcus Leper I need to get a spyder lol way more users than targa
Sent from my XT875 using XDA Free mobile app
Click to expand...
Click to collapse
@Oggie7797, My grandma has a DROID BIONIC, and my RAZR blows that phone out of the water! Not to mention that her screen has terrible screen burns all over, from the screen protector. The Bionic only has a regular TI-OMAP-4430 1000~300 MHz not the plus version right?
Bobcus Leper said:
@Oggie7797, My grandma has a DROID BIONIC, and my RAZR blows that phone out of the water! Not to mention that her screen has terrible screen burns all over, from the screen protector. The Bionic only has a regular TI-OMAP-4430 1000~300 MHz not the plus version right?
Click to expand...
Click to collapse
Incorrect if she updates to jb it clocks at 300-1200. When bionic first was released it was clocked at 1ghz but they realized at jb "hey let's clock it to an actual usable speed" lol
Sent from my XT875 using XDA Free mobile app
Hello all.
Today I am proud to bring you ODS Kernel for Android 6.0, based off FrancoKernel r33.
The purpose of this kernel is to build off of the amazing base that is FrancoKernel, and add a variety of passive patches, as well as some minimal features.
Features:
- Uses a Ramdisk based off of ChainFire's new SE Policy, meaning that we are able to leave SE Linux Enforcing, and retain Root
- Adds Kexec-HardBoot Flags to default build
- Disables some security check to allow (hopefully) for a full Kexec bringup in the near future (I'll be making an attempt at it, please PM me if you are interested in helping)
- Edits Ramdisk for additional MultiROM compatibility
- Built with custom ARM-EABI-4.6
- Adds partial ability to load kernel modules (in prep for aforementioned Kexec Module bringup)
- Everything included in FrancoKernel
To be implemented:
- Make use of ChainFire's new non-system altering root setup
- Allow for Wake gesture
- Allow for screen off gestures
- Add several binaries to ramdisk
Changelog:
- 8/31 - Happy Halloween!!!
Initial Release
Only setting that should be enabled by default is Charging LED, which can be disabled through any variety of Kernel Configuration apps.
I strongly recommend grabbing the FrancoKernel Updater app from the Play Store to support FrancoKernel's developer! If you want a free alternative, I recommend Kernel Adiutor (Not a misspelling).
To try the kernel, you can just "fastboot boot boo.img" To flash the image, you can use: TWRP Image Flash Option, "fastboot flash boot boot.img", or good ole' dd.
Source can be found here: https://github.com/npjohnson/ODS-Kernel-Shamu
Download: In the download tab up top. Won't work in TapaTalk. Open this page in a browser. If you can't do that, see here: https://drive.google.com/file/d/0B1rm1VFiz_2FV1lJcWpscWdDZ3M/view?usp=docslist_api
Happy Flashing!!!
XDA:DevDB Information
[KERNEL][M] ODS Kernel, Kernel for the Nexus 6
Contributors
npjohnson, npjohnson
Source Code: https://github.com/npjohnson/ODS-Kernel-Shamu
Kernel Special Features: Kexec-HardBoot/MultiROM Support, (Partially) Loadable Modules, Some Security Checks disabled to allow for a full Kexec Bringup, Root by defualt on M with SE Linux Enforcing
Version Information
Status: Testing
Current Stable Version: r3
Stable Release Date: 2015-10-30
Created 2015-10-31
Last Updated 2015-10-30
Download link?
Sent from my Nexus 6 using Tapatalk
Hai
Is This the DL?
Hi guys I am running stock m how do i flash this kernel do i need to flash only the boot.img or i need to install twrp and chainfire boot.img and then franco zip i am just so confused plz help sos
Actually... You did misspell it
Adiutor
Sent from my Nexus 6 using Tapatalk
Faux Sound?
No download link.
DreamFX said:
No download link.
Click to expand...
Click to collapse
Its in the git.
https://github.com/npjohnson/ODS-Ke.../target/product/shamu/ODS_Kernel-Shamu-r3.img hit "view raw" and you get the download
Flashed multiple times on Pure Nexus rom and couldn't ever get it to boot. Flashed from Franco kernel.. Anyone got this to boot? I installed through twrp and flashify and no go. Even tried Chainfire's boot image then su 2.52 then this kernel and no go. Bootlooped every time.
Maybe I need to do a full wipe and install that way?
flashback7 said:
Flashed multiple times on Pure Nexus rom and couldn't ever get it to boot. Flashed from Franco kernel.. Anyone got this to boot? I installed through twrp and flashify and no go. Even tried Chainfire's boot image then su 2.52 then this kernel and no go. Bootlooped every time.
Maybe I need to do a full wipe and install that way?
Click to expand...
Click to collapse
Did you clear app kernel setting, or dirty flash whatever rom your on first. I haven't tried flashing this kernel yet though
Sent from my Nexus 6 using Tapatalk
an21281 said:
Did you clear app kernel setting, or dirty flash whatever rom your on first. I haven't tried flashing this kernel yet though
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Been flashing for 4 years and I couldn't get it to boot. Booted every other kernel on the map.
an21281 said:
Download link?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
In the download tab up top. I don't really like the new DevDB format. I added a download link as well.
biglilsteve said:
Hai
Click to expand...
Click to collapse
OK...
farahzadfarahzad said:
Hi guys I am running stock m how do i flash this kernel do i need to flash only the boot.img or i need to install twrp and chainfire boot.img and then franco zip i am just so confused plz help sos
Click to expand...
Click to collapse
Flash the boot image through TWRP by selecting "install" then "images" (found in the bottom right), then selecting the boot image and installing.
MoSeriouS said:
Is This the DL?
Click to expand...
Click to collapse
The one on got is broken. Ill fix this asap.
rignfool said:
Actually... You did misspell it
Adiutor
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Lol. I will fix that.
DreamFX said:
No download link.
Click to expand...
Click to collapse
See above.
Tylog said:
Its in the git.
https://github.com/npjohnson/ODS-Ke.../target/product/shamu/ODS_Kernel-Shamu-r3.img hit "view raw" and you get the download
Click to expand...
Click to collapse
Yeah... Oops. The on in got releases is broken. It grabbed the one in the out directory, which I messed up the ramdisk on. The one in the Google Drive link above works fine!
flashback7 said:
Flashed multiple times on Pure Nexus rom and couldn't ever get it to boot. Flashed from Franco kernel.. Anyone got this to boot? I installed through twrp and flashify and no go. Even tried Chainfire's boot image then su 2.52 then this kernel and no go. Bootlooped every time.
Maybe I need to do a full wipe and install that way?
Click to expand...
Click to collapse
I apologize for the mistake. The one on git is broken. Please use the one linked in the OP.
an21281 said:
Did you clear app kernel setting, or dirty flash whatever rom your on first. I haven't tried flashing this kernel yet though
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
ROM shouldn't have to be clean flashed. Clearing current kernel settings is always a good idea.
flashback7 said:
Been flashing for 4 years and I couldn't get it to boot. Booted every other kernel on the map.
Click to expand...
Click to collapse
Like I said above, apologies, the one on git is broken.
Also, FYI, I test the kernel on both stock and PureNexus. It works beautifully on the 10/30 build of PureNexus, and even allows for Enforcing SE Linux, whereas Bean's kernel opts for Permissive.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
npjohnson said:
Also, FYI, I test the kernel on both stock and PureNexus. It works beautifully on the 10/30 build of PureNexus, and even allows for Enforcing SE Linux, whereas Bean's kernel opts for Permissive.View attachment 3526746
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thank you sir. I redownloaded kernel from link in op as you said and boot image flashed fine in twrp.
Any plans to add Francos color control in? Like the presets like he has in FKU? I immediately missed that feature. Going to give her a run a few days and see what happens. Thanks for sharing!
flashback7 said:
Thank you sir. I redownloaded kernel from link in op as you said and boot image flashed fine in twrp.
Any plans to add Francos color control in? Like the presets like he has in FKU? I immediately missed that feature. Going to give her a run a few days and see what happens. Thanks for sharing!
Click to expand...
Click to collapse
I'm not against it. I'll start a poll later today and gauge what is the popular opinion.
Sent from my Nexus 6 using Tapatalk
maybe it can sounds as a noob question but in daily use what's the difference between the original Franco's kernel and this mod?
provolinoo said:
maybe it can sounds as a noob question but in daily use what's the difference between the original Franco's kernel and this mod?
Click to expand...
Click to collapse
Read the features tab.
npjohnson said:
Read the features tab.
Click to expand...
Click to collapse
yes, I read it and it's full of features as it should be but that wasn't my question
provolinoo said:
yes, I read it and it's full of features as it should be but that wasn't my question
Click to expand...
Click to collapse
It has everything FK has, PLUS what is in the features.
Sent from my Nexus 6 using Tapatalk