Related
hey guys this is the new thread as the previous thread can not be monitored now as the owner of that thread @Ivan93tm don't have xperia go anymore
so here i start
requirements
Download and install JDK tools form Java here.
Download SDK android from this site.
usb_driver.zip - 8.68 MB
for installing the new sdk in windows 8
extract the sdk to a convenient place
run sdk manager and download Extras file "google usb drivers".
if sdk manager don't run then follow these steps
open sdk/tools/android.bat with your favorite editor.
find this code
set java_exe=
call lib\find_java.bat
if not defined java_exe goto :EOF
then replace this with
set java_exe="D:\Program Files\Java\jdk1.7.0_07\bin\java.exe" (make sure you give your java.exe file path)
save android.bat then run android.bat as administrator and you are done your sdk will run.
now follow the steps
go to settings in windows 8 then go to general then in advanced setup click restart now.
then go to troubleshoot --> Advanced option --> Startup settings --> Restart.
then you will get a window with some options choose number 7. Disable Driver Signature Enforcement.
or you can do it through cmd lines.
open cmd as administrative.
type "bcdedit /set testsigning on" and restart PC
and when bellow steps are done then at the end type this type "bcdedit /set testsigning off" in cmd and restart PC
power off you phone.
go to control panel --> system and Security --> System --> Device manager.
now connect your phone in fastboot mode i.e connecting to usb while holding the volume + button
USE USB 2.0 ONLY.
now S1 fast boot device is appear click fastly on it and update driver.
now when phone turn in normal mode unplag phone (keep open update driver windows).
select driver from folder
then select "chose manualy from a list of driver in computer".
browse from disk and select "android_winusb.inf" from "...\android-sdk\extras\google\usb_driver" and select "android bootloader interface.
before click next plug again the phone in fastboot mode.
click next and your done.
EDIT :
For WINDOWS 8.1
just update your windows from store
or download from here
credits to @Ivan93tm
One had success with different method:
http://forum.xda-developers.com/showthread.php?p=45550695#post45550695
ChikeD said:
One had success with different method:
http://forum.xda-developers.com/showthread.php?p=45550695#post45550695
Click to expand...
Click to collapse
he used flashtool but flashtool doesn't work for all including me i tried installing driver using flashtool in bot win7 and win8 but failed and finally i choose this method
garvitdelhi said:
he used flashtool but flashtool doesn't work for all including me i tried installing driver using flashtool in bot win7 and win8 but failed and finally i choose this method
Click to expand...
Click to collapse
Didn't work for him either before he followed the procedure.
ChikeD said:
Didn't work for him either before he followed the procedure.
Click to expand...
Click to collapse
ok cool but i have the driver right now i am going to try that method on another pc if it gives success then i am going to add that method also using his permission
garvitdelhi said:
ok cool but i have the driver right now i am going to try that method on another pc if it gives success then i am going to add that method also using his permission
Click to expand...
Click to collapse
I don't think he is the one posted if first, ask him where he found it.
I can't install because "S1 fast boot device" doesn't show up. The only thing that show up in Device Manager for me is "Unknown USB Device (Device Failed Enumeration). Does anyone know what this means?
registradus said:
I can't install because "S1 fast boot device" doesn't show up. The only thing that show up in Device Manager for me is "Unknown USB Device (Device Failed Enumeration). Does anyone know what this means?
Click to expand...
Click to collapse
Are you connecting your phone in fastboot mode .. ? and are you using usb 2.0 port
garvitdelhi said:
Are you connecting your phone in fastboot mode .. ? and are you using usb 2.0 port
Click to expand...
Click to collapse
Yeah I've tried everything. Connects fine normally.
tried
different USB ports, 2.0 and 3.0
enabling USB debugging mode
uninstalling drivers
Light on phone turns green, but then just goes into charging mode.
I'm on Windows 8 64
registradus said:
Yeah I've tried everything. Connects fine normally.
tried
different USB ports, 2.0 and 3.0
enabling USB debugging mode
uninstalling drivers
Light on phone turns green, but then just goes into charging mode.
I'm on Windows 8 64
Click to expand...
Click to collapse
green...??? it must be voilet or blue while pluging in your phone your phone must be switched off and then connect to usb whole pressing the volume up key not down
garvitdelhi said:
green...??? it must be voilet or blue while pluging in your phone your phone must be switched off and then connect to usb whole pressing the volume up key not down
Click to expand...
Click to collapse
Really? I've got Xperia U, PC Companion tells me to press volume down...
---------- Post added at 05:45 AM ---------- Previous post was at 05:35 AM ----------
garvitdelhi said:
green...??? it must be voilet or blue while pluging in your phone your phone must be switched off and then connect to usb whole pressing the volume up key not down
Click to expand...
Click to collapse
Tried holdin volume up instead, light goes blue, but still get "USB device not recognised"
green is for flashmode and voilet is for fastboot mode and try with volume up button pcc uses flashmode so it tells you to put with volume down and did your phone is detected by pcc if not try installing pcc again and then disable windows verification and then try again
Tried holdin volume up instead said:
Expriece the same bug (
anyone can help me, Everything is installed. PC Companion, Drivers, Flashtool
Click to expand...
Click to collapse
wellwits said:
Expriece the same bug (
anyone can help me, Everything is installed. PC Companion, Drivers, Flashtool
Click to expand...
Click to collapse
Have you tried what the OP says?
Try installing the drivers from flashtool with the steps in this post?
Good day is this woking on wndows 8.1 too ??
On my Windows 8.1 64-bit at step 8 it doesn't recognize it as S1 fastboot device.
When I select android_winusb.inf and click OK, it says the folder specified doesn't contain a compatible driver for my device, make sure it is designed to work with Windows x64-based systems.
So I can't. ;(
2Radon said:
On my Windows 8.1 64-bit at step 8 it doesn't recognize it as S1 fastboot device.
When I select android_winusb.inf and click OK, it says the folder specified doesn't contain a compatible driver for my device, make sure it is designed to work with Windows x64-based systems.
So I can't. ;(
Click to expand...
Click to collapse
same problem with my windows 8.1 64bit
Ok So i must sty on win 8
not working
im on win 8.1 & not worked for me
now in win Xp not working too
i think flash ic is damaged
usb not recognized in win xp in flash & fastboot mod :crying: :crying:
same problem here. device manager displays unknwon device and wont accept the .inf - file...
Hi my neo l not connecting in fastboot mode. I have updated all drivers but when i connect phone in fastboot mode a popup shows unrecognised usb device. Aldo not showing anything when i typed" fastboot devices " in cmd.
Mani-saini said:
Hi my neo l not connecting in fastboot mode. I have updated all drivers but when i connect phone in fastboot mode a popup shows unrecognised usb device. Aldo not showing anything when i typed" fastboot devices " in cmd.
Click to expand...
Click to collapse
Hello friend, try to connect to another USB port on your computer, if it does not work disconnect any USB devices you may have connected and try again, if still don't work is because drivers are not installed, try re-install them again, what windows version are you using, if it is Windows 8 there is special procedure how to install fastboot drivers,
Good luck
Yeah first make sure you see it in the Device Manager on Windows.
galarpo said:
Hello friend, try to connect to another USB port on your computer, if it does not work disconnect any USB devices you may have connected and try again, if still don't work is because drivers are not installed, try re-install them again, what windows version are you using, if it is Windows 8 there is special procedure how to install fastboot drivers,
Good luck
Click to expand...
Click to collapse
I have instaled all fastboot drivers. Also changed the cable.and in device manager it showing unknown device.
I am using windows 8 .which method for installing drivers???
how to
Mani-saini said:
I have instaled all fastboot drivers. Also changed the cable.and in device manager it showing unknown device.
I am using windows 8 .which method for installing drivers???
Click to expand...
Click to collapse
1- Hold SHIFT and restart you computer, always holding SHIFT or run this "shutdown /r /o"
2- You should be now on "Advanced Startup options", select "Troubleshoot" --->"Advanced Options"--->"Startup settings"--->"restart"
3- Next select option 7
4- plug your phone to computer in fastboot mode and install flashtool drivers, remenber to say yes on the windows appearing during installation, after everything is installed, restart your computer and problem solved.
Hi, unfurtunatlly I install TWRP JUI 7.1 when I was in EUI ROM. only red LED blink when USB cable is plugged in. PC says "unknown device" when Cool 1 is connetcted.
Phone is not visable to ADB, CDA and YGDP.
Do You have any idea how unbrick?
Ok. problem is resolved, I install new recovery by this thread instruction: https://forum.xda-developers.com/cool1/help/bricked-cool-1-t3726666/page2
• 1º install all drivers and MIFLASH
Remember that your device is erasing and only flashes the red light when connected to your computer, if your cell phone is in this state is a good sign as we will be able to get it to be identified to install the room;
2º HOW TO MAKE THE APPLIANCE IDENTIFIED ON THE PC
With the installed drivers connect your cell phone to your computer, open the Control Panel go to Device Manager and leave the screen open to observe: now with the phone connected we will press together the volume +, volume - and Power button together and secure them until the phone is identified by the system on the DEVICE MANAGER page (for the phone to be identified it may be necessary to keep pressing the buttons for more than 60 seconds, if it is not identified at the end of 120 seconds repeat the process of tightening buttons until the system identifies them).
• In case the system identifies but does not automatically install the driver it is necessary to perform a forced installation:
3º Forced driver installation:
With Device Manager open, we have the device to the computer, it has not been installed correctly for which it is necessary to perform the forced installation procedure. If the installation is not successful, the WINDOWS DRIVER DIGITAL SIGNATURE may be active and the installation of a set to first of all will disable it:
• Then type in the Windows search field and query by CMD, right-click and select to run as administrator with the command prompt open in administrator mode enter the following command without the quotes "bcdedit / set loadoptions DDISABLE_INTEGRITY_CHECKS "Ready a driver signature to be disabled, let's now forge a driver installation.
Right-click on the identified device but it is not recognized and select UPDATE DIVER, now on PROBE DRIVER SOFTWARE ON THE COMPUTER, click PERMIT THAT I CHOOSE ON A LIST OF AVAILABLE DRIVERS IN MY COMPUTER now in NEXT and on click in WITH THE DISK; Browse to your local disk where the driver was installed, LENOVO folder, normally installed in the directory: C: \ Program Files (x86) \ LenovoUsbDriver \ Navigate to a subfolder SERIAL and select the following file -Lenovo_ser click open and then In OK, Look for Qualcomm HS-USB QDLoader 9008 and confirm installation, prompt your device is now correctly connected and available and available for MIFLASH.
4º USING MIFLASH
Now with the drivers properly installed open the MIFLASH 1 click on REFRESH 2 select the folder of the recovery room that must be unzipped and 3 click on FLASH wait until the process finishes "in my case presented error at the end of the installation, but did not interfere , the process was enough so that I could already open the recovery mode of the mobile. "
• With the MIFLASH still open now press the Power button, volume - and volume + again until you make the identification noise on your computer again, in MIFLASH search for the EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92 folder and select the twrp subfolder and a REFRESH from your device should be recognized by MIFLASH, now click on FLASH and wait for the end of the installation.
With the twrp installed enter into recovery mode on your cell phone by pressing the Power buttons and the volume + button, click Wipe, Format Data, type yes and confirm this will delete your cell partition.
Hi guys,
i hope anyone has a solution for me here.
So i have this weired case where the phone shows up in ADB but not in fast boot in the windows device manager when using the Recovery/Fastboot mode.
I already tested 3 different PCs and multiple cables. I as well got lucky and a friend of mine got a note 9 as well. With this the Fastboot and ADB show so it shouldn´t be a driver issue.
Can anyone help me with this problem because i would have wanted to get TWRP on this phone.
...I think it's ok when it shows up in ADB. Did you hear the windows connection sound on the PC when you plug in the device?
You need to install the driver.
Without it, the phone is only detected in adb:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
Don't forget to disable Driver Digital Signature enforcing in Win10.
kalehrl said:
You need to install the driver.
Without it, the phone is only detected in adb:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
Don't forget to disable Driver Digital Signature enforcing in Win10.
Click to expand...
Click to collapse
As I wrote before, I got 2x the same Phone on hand one gets recognized and all by windows and shows up with the correct device driver in fastboot. The other phone doesn't show a thing, windows isn't even recognizing that it got connected in fastboot.
Strange is that the phone that doesn't get recognized in fastboot mode does get recognized in edl and adb mode.
So in the end I am looking for an information if this could be fixed or if the main board is some kind of damaged.
opg2000 said:
...I think it's ok when it shows up in ADB. Did you hear the windows connection sound on the PC when you plug in the device?
Click to expand...
Click to collapse
No sadly not, with the second device I could hear it connect and show correctly. The problem phone shows in adb and edl but not fastboot
Knoppersd said:
As I wrote before, I got 2x the same Phone on hand one gets recognized and all by windows and shows up with the correct device driver in fastboot. The other phone doesn't show a thing, windows isn't even recognizing that it got connected in fastboot.
Strange is that the phone that doesn't get recognized in fastboot mode does get recognized in edl and adb mode.
So in the end I am looking for an information if this could be fixed or if the main board is some kind of damaged.
Click to expand...
Click to collapse
I got the same issue but by installing the above driver and changing the new type-C cable.... helped me and solved my problem......
Knoppersd said:
Hi guys,
i hope anyone has a solution for me here.
So i have this weired case where the phone shows up in ADB but not in fast boot in the windows device manager when using the Recovery/Fastboot mode.
I already tested 3 different PCs and multiple cables. I as well got lucky and a friend of mine got a note 9 as well. With this the Fastboot and ADB show so it shouldn´t be a driver issue.
Can anyone help me with this problem because i would have wanted to get TWRP on this phone.
Click to expand...
Click to collapse
have yu got the solution of this because I am also facing the same issue.
No sorry, the phone is still dead and i moved on from it.
kalehrl said:
You need to install the driver.
Without it, the phone is only detected in adb:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
Don't forget to disable Driver Digital Signature enforcing in Win10.
Click to expand...
Click to collapse
Managed to connect my Redmi Note 9 (merlin) to Fastboot with my Windows PC and install stock ROM with MiFlash thanks to this driver.
To install the driver i did:
1. Download driver from link above (ignored Firefox's warning of potential risk).
2. Unpack the rar file.
Now we must disable Windows Driver Signature for the driver to install correctly. It will only be disabled during a single boot and the automatically revert to active and secure again after reboot.
3. Restart Windows while holding the "Shift" key through Start Menu -> Power ->Restart.
4. The blue Windows Advanced Boot menu should appear. Select: "Troubleshoot" -> "Advanced Options" -> "Startup Settings" -> "Restart"
5. Computer will restart to the Startup Settings Menu. Press number "7" key on your keyboard to select "Disable driver signature enforcement". Windows then will boot to Desktop.
6. Search and open "Device Manger" on Windows menu.
7. Under "Other devices" right click "Android" (for me it appeared with a caution sign because of the default driver error) and then "Update driver".
8. Browse my computer for Drivers -> "Let me pick from a list..." -> Select "ADB Interface" (not sure if it is important which type of device is selected) -> "Have Disk".
9. Browse the downloaded driver folder that was unpacked on step 2 and select "android_winusb.inf" (this is the Windows driver).
10. On the Windows Security prompt select "Install this driver anyway".
From here on Fastboot mode should be recognized by the PC and you can install a ROM using MiFlash or following any other guide to install via Fastboot in this forum.
i had boot the device into fastboot and while checking for connected device in pc using cmd , the device is not showing
device - realme 6
1-Download andriod google usb drivers file is attached
2-put device in fastboot mode and conect with pc
3- Go to device manager
4- see for unknow device or andriod with yellow mark on it in device manager
5- click on unknown device select update driver and select manualy pickup driver
6- select have disk select extracted usb driver folder
7- select andriod_winusb inf file
8-choose andriod bootloader interface and you are are good to go.
Thanks, it worked