hello, ive got a Goclever R103 netbook with Android 4.0, once i turn it on its not going past the android logo, it stays on logo all day and all night, wont boot up past it. ive pressed the reset switch and still does the same thing, so now im trying to reinstall android, ive connected a external cd rom with a hirens boot cd, just to see if it would boot to the menu but wont boot from external cd drive, ive also put android onto a microsd card with unetbootin, it doesnt seem to boot from microsd or a usb pen drive, do i have to press a certain key to make it boot from microsd card or to factory reboot it an do a fresh install. any help would be great... cheers!!
Related
Bought 2 16GB Nook tablets last week (one for wife) - used indirects method to boot CWM from SD http://forum.xda-developers.com/showthread.php?t=1466583 however got same error as Land Master and a few others where instead of booting CWM the unit booted a factory reset prompt instead. The suggested workaround is to boot while plugged into a computer however this did not work for me. In the end I did get CWM to boot and installed CM7 which is going great on both tablets (I'm in the UK so could not register or use the stock OS).
The workaround for me was, from a failed CWM boot that has gone through a factory reset screen (which is declined) to boot the stock OS,
1 eject SD properly, plug into Mains and reboot then turn off normally (i.e the nook has now been turned off from stock OS without booting from the CWM SD first)
2 re make the SD ( it seems booting into the stock OS with it inserted changed it in some way, no idea how)
3 turn on nook holding n and power button until nook turns - this is standard step
4 insert SD and turn on while still plugged into Mains (nook should have been plugged into Mains from step one)
This worked on both nooks, 1.4.1 out of box with oobe skipped, I swapped the SD after CWM booted for one with CM7, updated from this, wiped data rebooted and have not looked back since.
Hi Guys,
I really hope someone can help me out with this issue. I searched the forum and the internet but did not find any solutions.
My friend successfully rooted the Nook Tablet yesterday using a method that did not require an SD card. Today I was trying to install CM9 with ICS so I downloaded Nook Recovery Flasher.apk and flashed cwm. When I restarted my device got stuck into autorestarting loop. It shows the gray "n", which quickly followed by the clockwork recovery loading splash screen (the picture of the cardboard box). The device then shuts down and starts the cycle over.
I've tried holding the power and n button method but that doesn't work. I've also tried creating a bootable sd card but the device won't pick that up either.
I would appreciate any suggestions!
I've ended up bricking my 8GB NT a similar way. Ended up writing over my mmcblk partition with something I wasn't supposed to. Now stuck in a reboot loop, can't do adb, my phone isn't playing nice enough to where I can make a recovery SD.
BTW OP, from what I've read CM9 is only for 16GBs and will brick 8GBs.
Same thing happened to me a while back. I was able to create a bootable CWM sd card. From there you should be able to restore. If not, use the Ubuntu recovery.
Short answer: You're going to have to create a bootable SD card.
Hi all,
please need your help with my nook tablet, got bricked after trying to intall CWM, after that tried the ubuntu fix, I guess it didn't work until the end, so now got the "n" logo at the boot, and the message of battery low appears everytime, but it stayed in the plug whole day. don't know what happned, can't boot from SD.
jk13 said:
Hi all,
please need your help with my nook tablet, got bricked after trying to intall CWM, after that tried the ubuntu fix, I guess it didn't work until the end, so now got the "n" logo at the boot, and the message of battery low appears everytime, but it stayed in the plug whole day. don't know what happned, can't boot from SD.
Click to expand...
Click to collapse
It should be able to boot from the SD card because the nook automatically boots from there first. Try installing the latest version of of CWM onto the SD card and do a factory reset from there.
Here's the link for CWM Recovery. h ttp://goo.im/devs/succulent/acclaim/recovery/CWM_6.0.2.7_Nook_Tablet.7z
Wasn't sure where to post this, so figured here was the safest option - just change it if it needs it!
Hey guys. I've recently bought a CnM Touchpad 7 inch (a10 chip)
It was running fine till i installed an app i believe it didnt like. now when I boot it all it shows is the android logo constantly on loop and wont boot into the OS
So i held down vol + and power on button for 10 seconds to go into 3e recovery
I've tried wiping the cache / reset option but it still reboot and is stuck on the android logo on constant loop
i've tried Recovery (not clockword mod) and there is a boot from SD card, problem is it wont read any micro SD cards I put on it
so because of this i cant put a rom on it to flash it.
I figured as a last resort i'd try connecting it to my win7 pc and hoping it'd pick it up as a USB drive to drag and drop the rom on that way (even without the micro sd card inserted) since it has onboard memory of around 6gb i believe. but win7 dosent recognise it and cant find drivers for it
Any suggestions? I'm really stuck here. otherwise i've just got a bricked tablet.
Kind regards if anyone can shed light on this!
yodjone1 said:
Wasn't sure where to post this, so figured here was the safest option - just change it if it needs it!
Hey guys. I've recently bought a CnM Touchpad 7 inch (a10 chip)
It was running fine till i installed an app i believe it didnt like. now when I boot it all it shows is the android logo constantly on loop and wont boot into the OS
So i held down vol + and power on button for 10 seconds to go into 3e recovery
I've tried wiping the cache / reset option but it still reboot and is stuck on the android logo on constant loop
i've tried Recovery (not clockword mod) and there is a boot from SD card, problem is it wont read any micro SD cards I put on it
so because of this i cant put a rom on it to flash it.
I figured as a last resort i'd try connecting it to my win7 pc and hoping it'd pick it up as a USB drive to drag and drop the rom on that way (even without the micro sd card inserted) since it has onboard memory of around 6gb i believe. but win7 dosent recognise it and cant find drivers for it
Any suggestions? I'm really stuck here. otherwise i've just got a bricked tablet.
Kind regards if anyone can shed light on this!
Click to expand...
Click to collapse
Is it A10 processor or Rockchip??
I wanted to try TWRP recovery. I installed rashr app and installed TWRP latest on sd card then rebooted the tablet. It showed me N logo for a few seconds then turned off itself.
Now whenever i turn it on, it shows that N logo for like 5 seconds and turns off. When connected with USB, it keeps restarting. I tried removing the sd card, but no change at all.
Please tell me how to fix this.
Update
i got into clockworkmod 5.0.x recovery (made a bootable sd card) and installed old CM10. But still it keeps flashing only the Nook N logo & restarting forever. I guess my tablet is badly bricked. Is there any other way to fix this?
You need a version of CWM between 6.0.1.x through 6.0.3.x to flash CM10. See http://forum.xda-developers.com/showthread.php?p=51377882#post51377882 for additional info/pointers on how to install CM10.x on emmc.