Today I installed [ROM] [KitKat] [GSM] 11-3 Liquidsmooth 3.0 OFFICIAL and Resurrection Remix® 4.4.2 KitKat v5.1.0 [04/25/14]. I have problem that When I reboot or turn off then trun on my cell so my motorola rzar XT912 just showing Custome animated logo. And first time When 100% run ok so my phone settings showing XT910 model whenever My cell model is Xt912. Now problem is my phone not booting up after reboot I flashed 3rd time but same problem showing after reboot. Please guys guide me that How can I sove this probelm? How can I solve boot up problem.? I tried some other kitkat rom but same problem after reboot my cell.
I am using Safestrap and install on default stock not slot 1.so Is this my fault? I don't wanna create new slot becuase It's wasting 3 GB whenever XT912 alread have 3 GB ROM. Please guide me.
Please help me experts.. Where are you?
farhan76242 said:
Today I installed [ROM] [KitKat] [GSM] 11-3 Liquidsmooth 3.0 OFFICIAL and Resurrection Remix® 4.4.2 KitKat v5.1.0 [04/25/14]. I have problem that When I reboot or turn off then trun on my cell so my motorola rzar XT912 just showing Custome animated logo. And first time When 100% run ok so my phone settings showing XT910 model whenever My cell model is Xt912. Now problem is my phone not booting up after reboot I flashed 3rd time but same problem showing after reboot. Please guys guide me that How can I sove this probelm? How can I solve boot up problem.? I tried some other kitkat rom but same problem after reboot my cell.
I am using Safestrap and install on default stock not slot 1.so Is this my fault? I don't wanna create new slot because It's wasting 3 GB whenever XT912 alread have 3 GB ROM. Please guide me.
Click to expand...
Click to collapse
Are you wiping the slot before you are installing/reinstalling ROM's and Gapp's? Wiping dalvik cache and cache after the reflash? If your phone is a xt912, then you need Spyder ROM's not umts_spyder. Spyder is for xt912 umts_spyder is for xt910.
You may want to downlaod and keep mattlgroff's utility on hand, chances are you are going to need it.
Fix sim error in CM 12.1 lollipop for lenovo A6000 / plus
I have an idea how to fix sim errors on lenovo A6000/plus
Root your device (stock rom vibe ui)
install twrp recovery
Now go to backup section and backup fsg and modem
Now flash CM 12.1 lollipop and restore those file
:laugh: Done i hope this will wrk
TWRP recovery link :
Try and please do comment
tink2hakk said:
Fix sim error in CM 12.1 lollipop for lenovo A6000 / plus
I have an idea how to fix sim errors on lenovo A6000/plus
Root your device (stock rom vibe ui)
install twrp recovery
Now go to backup section and backup fsg and modem
Now flash CM 12.1 lollipop and restore those file
:laugh: Done i hope this will wrk
TWRP recovery link :
Try and please do comment
Click to expand...
Click to collapse
I have tried it but unfortunately not worked
TNq so much for trying !!
TNq so much for trying !! i'll try my level best to fix sim issue
Coming to LP, we have ART as the default runtime and each and every single file is oprimized to work with it.
I don't think MODEM files from stock are modified for running in ART module of LP.
We need to rework basically to make them work.
I had a hard time finding the solution and that's what I came up with after searching and all stuff. -_-
kaustubh.rockstar said:
Coming to LP, we have ART as the default runtime and each and every single file is oprimized to work with it.
I don't think MODEM files from stock are modified for running in ART module of LP.
We need to rework basically to make them work.
I had a hard time finding the solution and that's what I came up with after searching and all stuff. -_-
Click to expand...
Click to collapse
thats pretty amazing for your hard work and pretty annoying for making it work
question
tink2hakk said:
Fix sim error in CM 12.1 lollipop for lenovo A6000 / plus
I have an idea how to fix sim errors on lenovo A6000/plus
Root your device (stock rom vibe ui)
install twrp recovery
Now go to backup section and backup fsg and modem
Now flash CM 12.1 lollipop and restore those file
:laugh: Done i hope this will wrk
TWRP recovery link :
Try and please do comment
Click to expand...
Click to collapse
There is no option for backup fsg
There is only option for backup Efs
Sim Error
is this for TWRP recovery only? how about for Philtouch?! i lost my IMEI last month after flashing stock rom. unfortunately,i didnt found any solutions regarding Sim error. Do you have an idea how to fix Error?! im using vibeUI 2.0 as of now.
Same problem here, my device connot detect simcard
Try this to repair your imei it's on the back of your phone when you remove the battery. Note it down.
https://youtu.be/MdxFi33LzSA
Or
https://youtu.be/ePAOaAxGGc4
I cannot understand his language.. I need english.
found something helpful maybe
amodindo.tk/2015/08/rom-new-cm121-lenovo-a6000plus-all-fix.html?m=0
Can't post link edit it & check it out
Sir...yesterday I have flashed custom ROM CyanogenMod 12.1 ..working good in my lenovo a6000 plus..
I have found only one issue that my video recording is not working well..I can't record the video..any solutions??
Help me [email protected]
I have Samsung S3 GT-I9300CDMA /GSM mobile global unlocked mobile.I am using CDMA network in India. I want to install CM 11 or 12 on mine mobile but I think it’s not possible as bootloader is locked. The snap shot of the android firmware version is attached .I have rooted it with towel root app but unable to unlock bootloader as its android version4.4.2.I tried to install TWRP recovery but its failed.
It seems that Verizon SGH-I535 4.4.2 stock ROM Is installed on Samsung S3 GT-I9300 mobile.
I want to install safe strap on mobile,before that I want to download 4.4.2 stock ROM which is installed on my mobile.Pls suggest
1)Which firmware I have to flash in case its get bricked? Verizon I535- 4.4.2 stock ROM or Samsung S3 GT-i9300,Base band version I9300XXUGNA8,Build number KOT49H.I9300XXUGND5 ?
I am unable to find out the firmware installed on my mobile on google.
2) Can anyone provide me the link from which I can download this firmware.
if im not wrong i never found stock kitkat rom for the s3 i9300 samsung never released one , god knows why , but i can tell you if you really wanna try a build then i'd suggest you try cm 11 one of the snapshot versions it worked great for me and it made my device so much better.
Bootloader of my mobile is locked so i cant flash CM11. I want to flash ROM using Safestrap. I required the 4.4.2 version of Stock ROM which is installed on my mobile, in case my mobile get Bricked.
Hello guys,
So yesterday i flashed bleokta rom (using TWRP )for the Samsung galaxy s3(GT-i19300) Both Calls and wifi are not working so i flashed DN4 rom which fixed the calls problem and now im only having problem with WIFI..i try to connect to a network it just says connecting for 1second(Rapidly Fast)and then it just goes back to normal and nothing happen
Hope to see answers from you guys because i need to get this rom working by today!
Thanks.
Dears Developers i want your support in my xt910 running 4.1.2 system version : 982.124.14.xt910.retail.en.EU kernal version 3.0.8-g7198280 build number 9.8.2o-124_spuem-14,
i installed safestrap and installed marshmallow as custom ROM on another slot but the phone become very slow on both stock and the other rom , so i deleted marshmallow and now using the JB but also it become very slow oppining FB and even when i have aa phone call i can't answer it because of hanging i want your support if i can update to lollipop and or even make another JB or if there is any soft i can make but as stock rom which make my mobile smoth and work fine
please give me step by step advice
any one ???