I just wanted to throw it out there if you are looking for a good mount that is pretty universal with most cases and you can easily grab and go check out http://www.scosche.com/magicmount I haven't seen it around much. I came across it and thought it looked cool and perfect for me. I have the plate between my phone and Otterbox commuter and it works great. I previously was using the Ibolt device, but my only problem was it took two hands to get it in and out.
Just placed my order! I've had some bad experience with the imagnet which is the same concept but it never worked too well with bigger phones especially over speed bumps. Hopefully this one works better. Use the coupon code : "TECHHEAD" to get 20% off which almost covers the shipping cost!
Sent from my SM-N900V using Tapatalk
Shooshi said:
Just placed my order! I've had some bad experience with the imagnet which is the same concept but it never worked too well with bigger phones especially over speed bumps. Hopefully this one works better. Use the coupon code : "TECHHEAD" to get 20% off which almost covers the shipping cost!
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Well I haven't hit any speed bumps yet but so far so good I used the bigger plate it comes with for my phone. The package comes with two sizes.
I don't have the commuter anymore but from what I can remember the backside is pretty slippery so I'm glad it's working for you. I want to set this up with my neo hybrid case with the magnet between phone and case. We'll see how that goes... XD
Sent from my SM-N900V using Tapatalk
Shooshi said:
I don't have the commuter anymore but from what I can remember the backside is pretty slippery so I'm glad it's working for you. I want to set this up with my neo hybrid case with the magnet between phone and case. We'll see how that goes... XD
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yeah its pretty slippery I went down some bumpy roads earlier and it slid off...I then put the plate between the rubber and plastic on my commuter and seems to be better now.
Sucks, it cost me 21$ for shipping cause i'm in canada...
Damn that does suck
Sent from my SM-N900P using Tapatalk
MrWicked1 said:
Damn that does suck
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
it seems to be a really good mount, can't believe it cost double the price only for a tiny plastic holder. Anybody buy it for me and i'll pay with paypal the real shipping cost
adhesive in the sun?
MrWicked1 said:
I just wanted to throw it out there if you are looking for a good mount that is pretty universal with most cases and you can easily grab and go check out http://www.scosche.com/magicmount I haven't seen it around much. I came across it and thought it looked cool and perfect for me. I have the plate between my phone and Otterbox commuter and it works great. I previously was using the Ibolt device, but my only problem was it took two hands to get it in and out.
Click to expand...
Click to collapse
Any issues with the adhesive losing grip over time in the sun? I'm in southern california, and my dash gets baked quite often. Damn, just realized that the location I want to mount this would make my windshield shade difficult to place.... hmmm...
Epiclectic said:
Any issues with the adhesive losing grip over time in the sun? I'm in southern california, and my dash gets baked quite often. Damn, just realized that the location I want to mount this would make my windshield shade difficult to place.... hmmm...
Click to expand...
Click to collapse
No issues yet I actually just ordered another one for my other vehicle cause its been so good.
Sent from my SM-G900P using Tapatalk
I wonder if the magnet would have any long term effects on the magnetometer or compass.
Adhesive is NOT heat resistant enough!
I've bought 2 adhesive mount original Magic Mount systems for my car. The adhesive failed in the summer heat (here in Seattle) on both units. I had Scosche send me what they referred to as an "improved adhesive patch" which was supposed to solve the problem, and it too failed within a week. Great product other than it becomes unusable once the supplied adhesive patch fails. Grrrr. Will be getting some heat-resistant double sided tape and see if I can make that work. BTW, this product is available at Walmart for those not wishing to pay for shipping.
Damn that sucks mine are still going strong but yeah it doesn't get any hotter then mid 90s here
Related
Searching Ebay I found this case...
What do you guys think?
In my opinion it looks great but I'm concern in how's is gonna feel in hands and pocket becuase reading the info is like half silicon and half aluminum...
Is anybody's whants to Search it:
Item code: 140576723634
I say it sure looks nice. If it is silicon inside and aluminum outside, should provide a lot of protection. Might add a good amount of weight.
Never know when it comes to these eBay third party cases.
Description:
100% Brand New High Quality Silicone/Aluminum Case
Quantity:1
Made of high quality soft silicone and Aluminum
Provides a comfortable grip, added protection against accidental drops
Perfectly fits your phone, easy to insert and remove
This Hybrid Case is simple to put on and take off thanks to the Soft Silicone material that wraps around to the front of the phone
Unique design allows easy access to all buttons, controls & ports without having to remove the case.
Durable,and Hybrid design
Size: perfect fit
Color:Silver
I bet its slick as hell, fly right out of your hand
Sent from my 3rd Dimension of Evolution
I wonder if this affects signal strength.
rockypr said:
Searching Ebay I found this case...
What do you guys think?
In my opinion it looks great but I'm concern in how's is gonna feel in hands and pocket becuase reading the info is like half silicon and half aluminum...
Is anybody's whants to Search it:
Item code: 140576723634
Click to expand...
Click to collapse
looks like chromed plastic to me....?
Found a photo of a Purple version and in that pic we can view what is aluminum and what is silicone
Sent from my PG86100 using XDA Premium App
Red version
http://www.seidioonline.com/product-p/csr3hev3d-bl.htm
Looks good, fits great. Had one on my Evo 4g
Just received this one off ebay with batteries and screen protector. Screen protector feels like glass. Its aluminum on maybe acrylic
Sent from my PG86100 using XDA App
hey bro what is the full name of that case ? am trying to find it on ebay also. That case looks hot !!
Ebay
Here Is A Link To A Search That I Think Contains The Case.
http://cell-phones.shop.ebay.com/i....+3d&_osacat=20349&_trksid=p3286.c0.m270.l1313
I appriciate it
raabusmc said:
Just received this one off ebay with batteries and screen protector. Screen protector feels like glass. Its aluminum on maybe acrylic
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
That looks pretty SICK!!! PM me the direct link!
rockypr said:
That looks pretty SICK!!! PM me the direct link!
Click to expand...
Click to collapse
PM sent
Sent from my PG86100 using XDA App
spartan15A said:
Here Is A Link To A Search That I Think Contains The Case.
http://cell-phones.shop.ebay.com/i....+3d&_osacat=20349&_trksid=p3286.c0.m270.l1313
Click to expand...
Click to collapse
That would be correct. The seller ID is Ahkin_Digital
Sent from my PG86100 using XDA App
raabusmc said:
Just received this one off ebay with batteries and screen protector. Screen protector feels like glass. Its aluminum on maybe acrylic
Click to expand...
Click to collapse
That does look like a pretty sweet case. I especially noticed how, considering it's a cheap ebay case, the camera holes seem perfectly centered. On my $50 Defender the camera holes are slightly off center, makes me wonder what Otterbox's profit margin is (think Monster Cable). It does look nice and has some nice extras. One thing that concerns me is that it seems (through my past experience) that 2 piece hard plastic cases tend to come off the phone as soon as it hits the ground. I know the back is metal but the metal is attached to a hard plastic shell correct? Does it seem like it might come off easy? Just concerned because I had a hard plastic case on my OG EVO and the one time I dropped it the case popped right off and my EVO went skidding across the ground. Just hate to spend the money on a product that fails at the exact time you need it to do it's job.
ausch30 said:
That does look like a pretty sweet case. I especially noticed how, considering it's a cheap ebay case, the camera holes seem perfectly centered. On my $50 Defender the camera holes are slightly off center, makes me wonder what Otterbox's profit margin is (think Monster Cable). It does look nice and has some nice extras. One thing that concerns me is that it seems (through my past experience) that 2 piece hard plastic cases tend to come off the phone as soon as it hits the ground. I know the back is metal but the metal is attached to a hard plastic shell correct? Does it seem like it might come off easy? Just concerned because I had a hard plastic case on my OG EVO and the one time I dropped it the case popped right off and my EVO went skidding across the ground. Just hate to spend the money on a product that fails at the exact time you need it to do it's job.
Click to expand...
Click to collapse
The aluminum is adhered to what I believe is acrylic so that It's one piece. Its a snap on case. It fits tight. I'm not sure how easy its going to be to take on and off to swap batteries.
HTC Traced from my PG86100 using XDA App
raabusmc said:
That would be correct. The seller ID is Ahkin_Digital
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Bad news from the seller to me, he doesn't ship to Puerto Rico.... So I need to find a Hong Kong guy LOL
Sent from my PG86100 using XDA Premium App
raabusmc said:
That would be correct. The seller ID is Ahkin_Digital
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
just bought from ahkin. you should get referrals. hit the thanks button instead.
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
I bought my GS2 on launch day and ATT had 4 different cases in the store. Case Mate was the only one offered with a kick stand but it felt cheap so I opted not to get it. There was a nice leather case but none of them fit the phone, lol. Guess those will be sent back.
jm1280 said:
I bought my GS2 on launch day and ATT had 4 different cases in the store. Case Mate was the only one offered with a kick stand but it felt cheap so I opted not to get it. There was a nice leather case but none of them fit the phone, lol. Guess those will be sent back.
Click to expand...
Click to collapse
I just need thinness and a kickstand. :\
CalvinL said:
I just need thinness and a kickstand. :\
Click to expand...
Click to collapse
I am with you.
Sent from my SAMSUNG-SGH-I777 using XDA App
try the casemate case...I know it looks cheap, but it has a kickstand and its hard rubber, so its decent for impact
Case
Thanks for the link and the info...I too got my SGSII on launch day and was disappointed at the lack of accessories and items available for the AT&T branded SGSII. I even have communicated with Body Glove about one of their cases (As I have been a fan of that one and used it on my Cappy and Infuse both) but they said they will not be producing a Body Glove case for our phone So I am going to try the above listed one and I will let you know. Maybe even post some screens and update the thread.
hkeyman said:
Thanks for the link and the info...I too got my SGSII on launch day and was disappointed at the lack of accessories and items available for the AT&T branded SGSII. I even have communicated with Body Glove about one of their cases (As I have been a fan of that one and used it on my Cappy and Infuse both) but they said they will not be producing a Body Glove case for our phone So I am going to try the above listed one and I will let you know. Maybe even post some screens and update the thread.
Click to expand...
Click to collapse
Awesome. Please do.
I use the casemate pop case with the kickstand, it's held up pretty well. Used one on my infuse previously as well.
Sent from my SAMSUNG-SGH-I777 using XDA App
bigsho said:
I use the casemate pop case with the kickstand, it's held up pretty well. Used one on my infuse previously as well.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
I agree. Its no body glove, but it gets the job done.
I use the Casemate one as well.
Gets the job done
I bought this today instead of the leather case...
Its definitely not as bulky as I thought it would be (previous experience with the thrill and infuse pop cases) and the kickstand works great!
It also fits real nicely. The leather case seemed a little too tight and that it would require some effort to put in properly
Sent from my SAMSUNG-SGH-I777 using xda premium
F_L_Abs said:
I bought this today instead of the leather case...
Its definitely not as bulky as I thought it would be (previous experience with the thrill and infuse pop cases) and the kickstand works great!
It also fits real nicely. The leather case seemed a little too tight and that it would require some effort to put in properly
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
You bought what instead?
CalvinL said:
You bought what instead?
Click to expand...
Click to collapse
Lol whoops.
I got the case-mate pop case instead!
Sent from my SAMSUNG-SGH-I777 using xda premium
Had trouble verifying my Paypal account for some reason. I ended up paying more at Amazon for the case. Ended up costing $8.90 cause of NY tax.
check out my review on the case-mate http://forum.xda-developers.com/showthread.php?t=1286742
CalvinL said:
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
Click to expand...
Click to collapse
I've had this for about 3 days now. I think its called Minisuit
Pros: Thin, light, tight fit, good kickstand, cheap, quick delivery
Cons: no hole for secondary mic, generic micro usb rechargers have trouble given cutout (stock cable works fine)
Happy enough with it for now.
CalvinL said:
Does anyone know a good case with a kick stand? The most important features are just the kickstand and thinness. I know Casemate makes a great one, but it's way too thick.
This one seems okay:
http://www.ebay.com/itm/TPU-FoldOut...ccessories&hash=item2eb8015e60#ht_2188wt_1163
But I'd have to make a slight modification for the microphone, and most importantly, I don't know if it will fit. I'm quite weary of any of these cases that can fit both the international and ATT versions.
Click to expand...
Click to collapse
I just bought this same brand of case on Ebay except smoke color.
http://www.ebay.com/itm/Smoked-Kick...856661?pt=PDA_Accessories&hash=item1e67678615
I'll post a review once I receive it.
BigBopper said:
I've had this for about 3 days now. I think its called Minisuit
Pros: Thin, light, tight fit, good kickstand, cheap, quick delivery
Cons: no hole for secondary mic, generic micro usb rechargers have trouble given cutout (stock cable works fine)
Happy enough with it for now.
Click to expand...
Click to collapse
Yeah, it's called Minisuit. I ordered it via Amazon.
Luckily it's TPU and not a hard case so I can make that second opening.
ozone777 said:
I just bought this same brand of case on Ebay except smoke color.
http://www.ebay.com/itm/Smoked-Kick...856661?pt=PDA_Accessories&hash=item1e67678615
I'll post a review once I receive it.
Click to expand...
Click to collapse
I was considering that one, but hard cases are more difficult to cut the mic opening.
ny gs2 doesn't say Samsung or att on front.... only says galaxy S on back cover... is that supposed to be like that
Sent from my SAMSUNG-SGH-I777 using xda premium
Ok, I got the case.
Doesn't fit 100%.
The bottom in particular, but it's barely noticeable. The top mic needs to be cut out some more, which shouldn't be too difficult since it's not plastic.
Case actually looks a lot better than I expected. The kickstand is very flimsy, which I expected. Once you put the stand up, don't put any pressure on it. It's very likely to just snap off. The power button becomes pretty stiff, too.
They also ran out of minisuit keychain screen cleaners. They said if I want one, email them about how I feel my order is "incomplete without one," and they'll send one when they have more stock.
Kind of a weird way to make us word it.
Either way, I'd recommend this if you need a very sleek and thin case that doubles as a flimsy kickstand.
Three different cases for $5 plus tax. I picked up a Casemate pop.
Filter by cases and then sort by price.
http://www.att.com/shop/wireless/accessories/accessorieslist.prod5280404.html
Sent from my SGH-I777 using xda premium
Thanks just ordered AGF case.
Thanks for shaing! Might order a Casemate Pop too.
I bought this for full price along with sgs2, very solid and light weight, saved my phone from many drops and highly recommend this.
rav4kar said:
I bought this for full price along with sgs2, very solid and light weight, saved my phone from many drops and highly recommend this.
Click to expand...
Click to collapse
Which case?
j510 said:
Which case?
Click to expand...
Click to collapse
http://www.att.com/shop/wireless/accessories/cases/sku5370229.html#fbid=BgNN0UrhHYc
He's talking about the Casemate
Sent from my SGH-I777 using xda premium
Great find...FREE SHIPPING TOO!!
But you guys have had good luck with the pop? I have had a really bad time with echo on the callers side with several other cases.
at red_81
Red_81 said:
Three different cases for $5 plus tax. I picked up a Casemate pop.
Red; do you have the case yet? If so, is the echo on the callers side an issue with this case. I want to order it before the sale goes off but have had so many problems with echo on other cases..I hate to waste even 5 dollars again.
Click to expand...
Click to collapse
Got it over the weekend and I haven't had any complaints about echo. However, this case is thick! It no longer fits in my desktop dock and almost doubles the thickness of the phone.
Sent from my SGH-I777 using xda premium
Red_81 said:
Got it over the weekend and I haven't had any complaints about echo. However, this case is thick! It no longer fits in my desktop dock and almost doubles the thickness of the phone.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
hmmm..
I think I'll go ahead and get it. It is still on sale as of today. I guess with free shipping the most i'll be out is 5.40 anyway. I don't use a dock and I am thinking a little thicker might not be a bad thing for my big hands anyway. I'll let you know how mine is when I get it.
Red_81 said:
However, this case is thick! almost doubles the thickness
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
This is why i went for the agf. Ill post back in an hour about the agf case. Should be getting it in the mail today .
case
j510 said:
This is why i went for the agf. Ill post back in an hour about the agf case. Should be getting it in the mail today .
Click to expand...
Click to collapse
Do you have it yet? Awaiting your review so we can see if we want to spend another 5.50 or not, LOL
I just checked this AM and they are still on sale.
bailey37821 said:
Do you have it yet? Awaiting your review so we can see if we want to spend another 5.50 or not, LOL
I just checked this AM and they are still on sale.
Click to expand...
Click to collapse
I really like the case, its about the same thickness of my platinum series or "seido" case. It's very lightweight with the phone in the case. I like the design a lot and it fits nice in my hand. It doesn't really feel like rubber but more like plastic, although it IS in fact rubber. The leather and stitching is on point, it gives it a nice look and feel. The side treads? Gives the user a good grip. Ive seen a lot of reviews saying it is hard to put the case on, but for me it wasn't even close to.being difficult. For $5 its a steal. High quality case seems like it'll be able to go through many drops without any problems. One more thing it hugs the phone very snug so you can rest assure that the phone won't pop out and it will stay protected. Here's pictures:
The buttons on the sides arent bad btw. The case does not affect my screen protector (rise along the edges or corner). Heres the inside of the case:
thumbnails
j510 said:
The buttons on the sides arent bad btw. The case does not affect my screen protector (rise along the edges or corner). Heres the inside of the case:
Click to expand...
Click to collapse
Looks good. I did not think the leather would look good, but it works on that case. I may have to just order that one too.
thanks for sharing!
Thanks for the heads up no this sale. I picked up the leather one. The pics look good.
thanks for the share grabbed the agf ~
j510 said:
I really like the case, its about the same thickness of my platinum series or "seido" case. It's very lightweight with the phone in the case. I like the design a lot and it fits nice in my hand. It doesn't really feel like rubber but more like plastic, although it IS in fact rubber. The leather and stitching is on point, it gives it a nice look and feel. The side treads? Gives the user a good grip. Ive seen a lot of reviews saying it is hard to put the case on, but for me it wasn't even close to.being difficult. For $5 its a steal. High quality case seems like it'll be able to go through many drops without any problems. One more thing it hugs the phone very snug so you can rest assure that the phone won't pop out and it will stay protected. Here's pictures:
Click to expand...
Click to collapse
Thanks for the review and pictures. I was on the fence about getting yet another case (I have 3-4 ebay specials I swap in & out), but the pictures really make this look sharp.
Just ordered, $5 for a $18 case is a steal.
Just got an email back from them stating they are in fact making a case for the nexus 6! Yay!
I always thought those looked really cool. I'm afraid they might be kinda bulky on a phone this big, though.
Sent from my Nexus 4 using XDA Free mobile app
Oh **** YES!
I always wanted one of these cases for my devices, but they never seemed to support anything past Galaxy/iPhone devices. Now I know what case I will be getting for sure!
No dust covers and silly Transformers reliefs on the back that will interfere with an Aidock (and even with putting a magnetic sticker there for the airdock to adhere).
Nope : I'll pass.
noraef said:
No dust covers and silly Transformers reliefs on the back that will interfere with an Aidock (and even with putting a magnetic sticker there for the airdock to adhere).
Nope : I'll pass.
Click to expand...
Click to collapse
What is the aidock?
jdenman03 said:
What is the aidock?
Click to expand...
Click to collapse
The airdock is a wireless charging dock (essentially, for cars) : you lay your phone on a micro suction foam (below which is the QI coil), and it adheres to it. If your phone case is a bit rugous, the foam will not work as well, but you can just use a smooth magnetic adhesive (supplied with the dock) which'll work fine....
... provided you can lay it flat on the rear face of your case. And with such shapes on Urban Armor Gears cases, it will be a problem...
noraef said:
The airdock is a wireless charging dock (essentially, for cars) : you lay your phone on a micro suction foam (below which is the QI coil), and it adheres to it. If your phone case is a bit rugous, the foam will not work as well, but you can just use a smooth magnetic adhesive (supplied with the dock) which'll work fine....
... provided you can lay it flat on the rear face of your case. And with such shapes on Urban Armor Gears cases, it will be a problem...
Click to expand...
Click to collapse
Like the imagnet dock, only it charges it too? I have the imagnet right now and use the UAG case on my HTC m8 and it works just fine.
jdenman03 said:
Like the imagnet dock, only it charges it too? I have the imagnet right now and use the UAG case on my HTC m8 and it works just fine.
Click to expand...
Click to collapse
Yeah, but we don't know yet wether there'll be enough metal in the right place inside the Nexus 6, so to do without a magnetic sticker ; and said sticker won't do with the back of such a case as the Urban Armor Gear one.
The Airdock also has a suction foam which makes magnets redundant (or at least, adhere better, which is always good in the car), but it requires glossy and (rather) flat plastic at the back of the case, which is another problem with this one...
Well... we'll see what comes out as accessories. I now hope Otterbox indeed really is considering a case, as neither Trident nor Ballistic seem interested, and as Spigen won't do a case with dust covers. So a Commuter is among my last hopes, so I can buy the Nexus 6... If I can't have a somewhat rugged case (without going to the last extremities), I'll have to pass on this phone, even though I'd really like to get it.
Was always interested in UAG cases. Will probably cop one for times when I'm doing an activity that may require a heavier duty case for extra safety measures.
Sent from my Nexus 5 using Tapatalk
Have one for my GN2 and really like it. Would definitely be interested in one for the Nexus 6!
Sent from my GT-N7105 using XDA Premium HD app
Look what I found. Sorry that I can't post a direct link yet. You're all seasoned internet users and should know how to put that into the address bar properly
amazon com/Urban-Armor-Gear-Motorola-Nexus/dp/B00OUC85MO
Jabber86 said:
Look what I found. Sorry that I can't post a direct link yet. You're all seasoned internet users and should know how to put that into the address bar properly
amazon com/Urban-Armor-Gear-Motorola-Nexus/dp/B00OUC85MO
Click to expand...
Click to collapse
39.99? That's a lot for a case in my opinion is it worth it?
Here's the link again http://www.amazon.com/Urban-Armor-Gear-Motorola-Nexus/dp/B00OUC85MO
Thanks for linking it. I never had a UAG case before so I couldn't tell you. 40 bucks is quite steep for what amounts to a piece of plastic in my opinion. I'm thinking more of a flipcase or something with a kickstand since the phone is so large. The fact that the volume and power buttons are on the same side would suggest that they intend for it to be more of a media consumption device as well.
Pilz said:
39.99? That's a lot for a case in my opinion is it worth it?
Click to expand...
Click to collapse
I have this case on my iPhone and its boss!!! Will probably end up getting it for the n6 too
Sent from my Nexus 7 using Tapatalk
It is a bit pricey. I'm worried about the curvature of the back and those indentations. Almost wouldn't feel comfortable I'd imagine.
Seems like it might be awkward.
Sent from my GT-N7105 using XDA Premium HD app
Hope they come in more colors. Never really liked the "crystal" version.
Jabber86 said:
Thanks for linking it. I never had a UAG case before so I couldn't tell you. 40 bucks is quite steep for what amounts to a piece of plastic in my opinion. I'm thinking more of a flipcase or something with a kickstand since the phone is so large. The fact that the volume and power buttons are on the same side would suggest that they intend for it to be more of a media consumption device as well.
Click to expand...
Click to collapse
My Seidio CONVERT Case for the Nexus 4 was $50 when it was released and to this day I never had any damage happen to my phone (hell even the glass back has not been damaged at all if you can believe it!).
Fact is that when you are paying up a premium, you are paying for top notch protection. My Nexus 4 never was graced with the attention of Otterbox or UAG (hell I wish it was) but considering the attention and love the Nexus 6 is getting from Case Manufactures it is good luck for all of us on the options out there for us now!
I personally cannot wait for this case. I just hope they get it out there soon!
I'd like to see one in that olive green color they make.
Sent from my Nexus 4 using XDA Free mobile app
My problem with the UAG for my S4 was that the high lip on the front, even with a tempered glass screen protector, interfered with swiping from the side gesture for opening the navigation drawer. The N6 is supposed to have a nice edge on the side, and I am afraid of ruining it.
For those of you wanting other colors: I just e-mailed their support and asked if they had any plans for different styles/colors. The response was a negative
Shame really, the Scout style looks really nice.
Ringke MAX Wrist Strap Lanyard Removal
**Remove at your own risk**
Direct Link
YouTube
Feel free to ask question, leave comments/feedback, or offer tips/advice for others.
I was thinking about how I was going to try to remove that lanyard connection. I knew that dremel sanding was going to cause some discoloration.
Sent from my Nexus 6 using XDA Free mobile app
machostallion said:
I was thinking about how I was going to try to remove that lanyard connection. I knew that dremel sanding was going to cause some discoloration.
Click to expand...
Click to collapse
It's not so bad. Case is much more enjoyable without the corner jabbing you in the palm. People still comment about phone/case looks, don't even notice it.
I just wish they didn't make the inside lanyard corner deeper than the opposite side. Otherwise it would be nearly identical. I picked up another MAX today for $10 and an extra FUSION for $6.
50% off on Ringke cases going on.
Andromjb said:
It's not so bad. Case is much more enjoyable without the corner jabbing you in the palm. People still comment about phone/case looks, don't even notice it.
I just wish they didn't make the inside lanyard corner deeper than the opposite side. Otherwise it would be nearly identical. I picked up another MAX today for $10 and an extra FUSION for $6.
50% off on Ringke cases going on.
Click to expand...
Click to collapse
Hopefully the Fusion doesn't come with scratches. My first one did :| not very happy about that.
Was thinking about picking up a SF Black slim but I'm pretty content with my Spigen Ultra Hybrid aside from the buttons but double tap to wake + sleep is helping me
Damn I'm mad I didn't see this 23 minutes ago. Sell is over now.
Edit: worked when it switched the order fulfillment from Amazon to Rearth. Thanks!
Sent from my Nexus 6 using Tapatalk
Shawheim said:
Damn I'm mad I didn't see this 23 minutes ago. Sell is over now.
Edit: worked when it switched the order fulfillment from Amazon to Rearth. Thanks!
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Sale only works on Rearth and not the Amazon prime
Sale is still working at the moment.
Just got mine in the mail. Awesome case!
Sent from my Nexus 6 using Tapatalk