I want to root my HP slate 7 , but i am worried that if it goes wrong , i dont have any backup.
Can anyone help me on how to take a backup image of my tablet and how to use it in case something goes wrong during rooting ??
You have fastboot?
Dump system and boot image then you can glass or from there
Use adb or terminal emulator
First of all search if anyone has uploaded the stock system or not
And dont be scared of root
Root your phone, install recovery and then backup w/o any modifications or flash
If u dont have system then continue below
If in adb type adb shell, if emulator then skip this step
Use command
dd if=/block/to/system of=/sdcard
Replace block/to/system with the block of system
Press :highfive: thanks :good: if helped
Related
Hi Peeps
Been looking into the quickest way into getting back to my fave rooted stock after a quick rom flash. I'm definetly a rom "hopper" and one thing stopping me from really going mad is the "faffing" about getting back to my my working scenario after I decided I was bored of a rom or it went and broke or something putting me off it.
I experimented with CWM backup and restore and was astonished at the "complete" restore it did.
I I backed up my rooted KH3 stock with CWM then wiped the system before trying a new batista70. It was broken again for me so I wiped and tested the restore.
The WHOLE previous system was there, my data, kernels, root, EVERYTHING.
Nothing to set up!
Is this too good to be true have I missed anything.
Can I now try roms to my hearts content and if I want revert back to that Kh3 back up ( or of course have a few backups of different roms and restore as desired )
Thanks
Back up EFS as a standby .
jje
when you backup with CWM does it also backup ur gallery??
JJEgan said:
Back up EFS as a standby .
jje
Click to expand...
Click to collapse
ooh umm whats that and how do I it? thanks!
edit#
just had a quick look and its the imei and harware info section that can get corrupted, I saw some one say you can zip it up with root explorer and do that.
I have made a tar and a zip just in case, what situation would I be in if I needed to restore it and at what point ? thanks?
edit#
ok now have a backup as per
http://forum.xda-developers.com/showthread.php?t=1068193&highlight=efs+backup+restore
here is what you need to know in a nutshell
########EFS BACK UP##########
What you will need:
Rooted SGS II to get permissions as a SU (Super User) and perform the backup
I would suggest learning a little about the terminal commands used (in case you are not familiar with them), as it’s better to know what you are doing rather than typing strings like a little chimp without knowing what they are; if you are a little lazy, then you have a good chance bricking your mobile. <- Busybox Commands(or Google them)
Terminal Emulator by Jack Palevich (available from the market) <-Terminal Emulator or use ADB which is included in the SDK Development Tools
2 Back Up Methods
CLEAN :
su
busybox tar zcvf /sdcard/efs/efs-backup.tar.gz /efs
RAW :
Code:
su
cat /dev/block/mmcblk0p1 > /sdcard/efs/efs_dev-block-mmcblk0p1.img
#######EFS RESTORE CLEAN########
Here's how to restore using the Clean Method
su
busybox tar zxvf /sdcard/efs/efs-backup.tar.gz -C /
########EFS RESTORE RAW##########
Either
Code:
dd if=/sdcard/efs/efs_dev-block-mmcblk0p1.img of=/dev/block/mmcblk0p1 bs=4096
Or
Code:
cat /sdcard/efs/efs_dev-block-mmcblk0p1.img > /dev/block/mmcblk0p1
#########KTOOL.APK###############
Easiest Way really app that does it all for you....one click backup..one click restore
http://f.lui.li/get_99_f13d.html
install app....open.....
backup Efs to /sdcard/efs.img (default loc)
restore efs.img (if you moved this to a secure place (dropbox)..copy back to
/sdcard/ (as per backup)
From I gather this should be done before you start messing and flashing
with your shiny new droid.....
For all you Shotputterz heres the factory image we've been waiting for
assuming you have debug mode enabled, ADB and fastboot working properly
EDIT 1: REUP'D CWM mod
EDIT 2: reordered process to make more sense
Method:
1. Download the Beta CWM mod from rootzwikis credit to birdman EDIT:REUP'ED http://d-h.st/Fdp
2. Using fastboot, DO NOT FLASH Clockwork mod just use the syntax
"fastboot boot 'File path of clockwork mod image'
Note* this will boot directly into the recovery without permanently writing to the recovery and boot partition on the eMMC on the Nexus Qs board
3. Download the posted CWM factory backup posted
4. make the directory on the device and adb push the backup folder (unzipped) to /sdcard/clockworkmod/backup while in CWM recovery
*The device should show up in "adb devices" while in the CWM recovery*
5. *TEXT WILL BE REALLY SMALL! Now navigate with the Scroll wheel to backups and restore and tap the mute button to select.
*IF SOMETHING IS SELECTED IN ERROR THERE IS NO BACK BUTTON JUST REBOOT AND REDO FASTBOOT BOOT*
6. Now select restore and select the image folder
7.blah blah CWM Freaking MAGIC
8. Your Q is back to factory state
If someone wants to PM me or show me how to package this in a nicer CWM zip to install with a script let me know
http://d-h.st/yeo
*Note* I am NOT responsible if you brick your already bricked Nexus Q*
You sir get a beer, since my 2nd (dev) Q won't arrive until later this week, and mine was a shot put until this post.
If you happen to be in NYC before I move to SF, you get three beers.
Hoppy ones.
I am moving to SF
Did the reflash go smoothly?
fiveipads said:
I am moving to SF
Did the reflash go smoothly?
Click to expand...
Click to collapse
No unfortunately it didn't--I blew away all partitions other than bootloader so I can't, to my knowledge at least, push the zip since I can't adb.
I've got factory recovery, boot, system imgs but the system img won't push out because of fastboot's apparent inability to handle files that large (1GB exactly I believe).
...I guess I have to patiently await my second Q but the point of having two was to *use* one and have one for dev... rather than have one as a heavy reminder of my overzealous endeavors...
Hopefully I can give it more time while on this SF trip...
Boot into the cwm bootloader with fastboot without flashing. Adb will be enabled and you can push files the files while your in adb recovery. Try that and flash it.
Sent from my SPH-D710 using xda app-developers app
Does our Q's have internal memory.. if not wouldn't it be possible to run back up of off otg memory stick if recovery would support it
Sent from my Galaxy Nexus using xda premium
fiveipads said:
Boot into the cwm bootloader with fastboot without flashing. Adb will be enabled and you can push files the files while your in adb recovery. Try that and flash it.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
The problem I'm having is that ADB is not responding from CWM... at least not on a Windows machine. The drivers are fine as ADB was working in normal mode before my issue sprung up.
EDIT: As suspected Virtual Ubuntu on a Win host didn't see the device, Physical Ubuntu had no issue. NQ reloaded.
fiveipads said:
Boot into the cwm bootloader with fastboot without flashing. Adb will be enabled and you can push files the files while your in adb recovery. Try that and flash it.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Can we do this by say pushing the file to the download folder and then installing from zip?
And i know slightly off topic but once we've installed some apks for example, what's currently the best interface to use to navigate through the apps and use them?
How do I make a directory on Nexus Q
fiveipads said:
For all you Shotputterz heres the factory image we've been waiting for
assuming you have debug mode enabled, ADB and fastboot working properly
Method:
1. Download the posted CWM factory backup posted
2. make the directory on the device and adb push the backup folder (unzipped) to /sdcard/clockworkmod/backup
http://d-h.st/yeo
Click to expand...
Click to collapse
In step 2 you say make a directory for the file that is posted below. How do I create a directory on the Nexus Q? Currently my Q is stuck in a bootloop after trying to launch CWM from a Galaxy Nexus. If you could post command codes that would be awesome!
I figured it out. You can just follow step #4 and in CWM you can push the CWM Factory img to the /sdcard/Download/ folder and use CWM to unzip and launch.
Could someone please provide me the beta cwm image for Nexus Q? The links are all circular and point to
http://goo.im/devs/birdman/CWM-steelhead-beta.img
Which is dead...
discoltk said:
Could someone please provide me the beta cwm image for Nexus Q? The links are all circular and point to
http://goo.im/devs/birdman/CWM-steelhead-beta.img
Which is dead...
Click to expand...
Click to collapse
I've been trying to get ahold of this image too! Anyone?? anyone?? Bueller???
WildSatchmo said:
I've been trying to get ahold of this image too! Anyone?? anyone?? Bueller???
Click to expand...
Click to collapse
Me as well...not sure why I got this damn thing...lol
The edit didn't prompt an email to me even though I'm following the thread, so those of you looking for the clockworkmod beta image please take note that OP was kind enough to provide a working link to the image.
Thanks fiveipads!
Can someone post full backup please?
caioketo said:
Can someone post full backup please?
Click to expand...
Click to collapse
The link at the bottom still works for me...
http://d-h.st/yeo
..
ok this is really bothering me, i've restored with this factory image several times, and I have to do it again right now and I cannot seem to push this file folder to /sdcard/clockworkmod/backup
what am i doing wrong..
it should be:
adb push NexusQFactoryImage /sdcard/clockworkmod/backup/ (assuming the file is in same folder as adb which it is)
that's it right.... the extracted folder contents in a folder.. not the zip.. so i dont understand why this is not working. Everytime I go to CWM and try to restore it tells me nothing to restore...
what really bothers me is that i've done this a hundred times, and never had this problem..
UKROB86 said:
ok this is really bothering me, i've restored with this factory image several times, and I have to do it again right now and I cannot seem to push this file folder to /sdcard/clockworkmod/backup
what am i doing wrong..
it should be:
adb push NexusQFactoryImage /sdcard/clockworkmod/backup/ (assuming the file is in same folder as adb which it is)
that's it right.... the extracted folder contents in a folder.. not the zip.. so i dont understand why this is not working. Everytime I go to CWM and try to restore it tells me nothing to restore...
what really bothers me is that i've done this a hundred times, and never had this problem..
Click to expand...
Click to collapse
BUMP.. stuck in CWM unable to get a restorable file.. no idea why...
Download OneClickRestore (it's the factory image straight from Google with the needed fastboot files included)
Extract zip to OneClickRestore
Unplug Nexus Q
Plug in Nexus Q and place hand on it til the leds turn red then remove hand
Launch "flash-all.bat" from the OneClickRestore folder
You may need to do a full reset, it's hit or miss
Another option is push & flash (Nexus Q)uantum Singularity Project RTS ROM from CWM and again may need to hard reset.
RTS is
Based on stock 4.0.4 build IAN67K
Deodexed
Zip aligned
init.d Support
bash support
Busybox updated
Prerooted
Superuser
Updated Keymap (Home=Home, End=Back, Delete=Menu, Insert=Visualizer)
Lokifish Marz said:
Download OneClickRestore (it's the factory image straight from Google with the needed fastboot files included)
Extract zip to OneClickRestore
Unplug Nexus Q
Plug in Nexus Q and place hand on it til the leds turn red then remove hand
Launch "flash-all.bat" from the OneClickRestore folder
You may need to do a full reset, it's hit or miss
Another option is push & flash (Nexus Q)uantum Singularity Project RTS ROM from CWM and again may need to hard reset.
RTS is
Based on stock 4.0.4 build IAN67K
Deodexed
Zip aligned
init.d Support
bash support
Busybox updated
Prerooted
Superuser
Updated Keymap (Home=Home, End=Back, Delete=Menu, Insert=Visualizer)
Click to expand...
Click to collapse
The problem with putting Quantum singularity project on is that I can't turn on ADB debug, because i use a bluetooth mouse and keyboard, don't have an OTG mouse/keyboard, so somehow I need to be able to connect with adb to setup a bluetooth connected mouse/keyboard
I was thinking to install stock image, and then without wiping install Quantum SIngularity Project over top to preserve the settings for usb debug, on.
what's confusing to me is that i've restored the stock image many times before, and never had a problem.. that's why im wondering what the problem is.. if im typing something wrong.
I used the OneClickRestore as you said, and im just booting it up now
EDIT: didn't get past boot logo, i'll try again
So just to confirm this OneClickRestore is loading the stock nexus Q img right? I've never used it before I usually manually do it
EDIT: still stuck at the nexus q logo before home screen
do you see any error in my commands of trying to push the stock img folder (original post) to "/sdcard/clockworkmod/backup" ? I've done it many times before never had a problem
Phone is a Star X19i
Now I'm looking at getting a system to allow me to back up the rom and re-flash if needed.
Post 4 has attachments of my boot, recovery and scatter files.
Old issue: (Solved)
Stupid thing I did I renamed the mtklockscreen.odex to mtklockscreen.odex1 just as a test in a half asleep phase to see if I would get the stock lockscreen loading.
Suffice to say the phone no longer boots.
Really don't think I can get into ADB and rename the file to get the phone booting again unless anyone knows a way.
Android was 2.3.6 and I asked the seller if it was possible to get the rom incase anything like happened which they didn't.
So anyone have any ideas?
I have attached the stock recovery and boot images made with cat and a scatter file I made to post 4.
As I have no idea about modifying these for hard root can anyone take a look?
I don't know the specifics of the phone, but if you can go into recovery mode maybe you can get adb working, or use a flashable zip to rename the file by installing it from recovery (just need to edit the zips' updater script)
dxppxd said:
I don't know the specifics of the phone, but if you can go into recovery mode maybe you can get adb working, or use a flashable zip to rename the file by installing it from recovery (just need to edit the zips' updater script)
Click to expand...
Click to collapse
I got into built in Factory mode and can see the file I renamed through ADB and android commander but cannot rename it back due to not having hard root access.
I also have a copy of the boot and recovery partitions 5 and 6 respectively I made in the adb shell yesterday as I was half looking at getting hard root access.
ren mtklockscreen.odex1 mtklockscreen.odex
ren: permission denied
I read you can do a custom recovery with root using SP Tools still so can anyone help me do this?
I know about system root etc and stuff and have flashed roms before on other tablets and have been a PC I.T tech (wouldn't think it due to the stupid mistake) but this recovery and scatter files etc is kinda new to me.
I have a scatter file now I just made if anyone is interested in helping me.
Yes I have a MTK6573 but the scatter file came from the MT6516 Rom Studio which I read works the same for the 6573.
Attached is also my stock boot and recovery partitions I made with cat yesterday if there usable to anyone to help.
Well I got it working and fixed.
I had to go into adb shell and su and mount the file system as writable, as I have used linux before I didn't know about android and what needed to be done and permission locks etc.
The stock boot, recovery and scatter files will remain on this thread if anyone wants to help create or find a recovery which can allow me to create backups and flash custom roms.
I may be able to provide a dump of android 2.3.6 for those that want it once I'm provided with a backup solution as I have read a few people wanting this updated android rom.
This got too close to what I would like liked with bricking this phone.
And I'm not comfortable unless I have a rom backup of this.
Rooting Advice: For anyone with a MTK6573 on Android 2.3.6 trying to root but having issues with super one click make sure you only turn on USB debugging after Android has loaded and just before you plug the usb cable in to run super one click.
I have seen a few thread and posters here about not being able to root the phone and this is the cause that debug needs to be switched on right before you connect and try to root.
Original seller has agreed to send the firmware and flashing stuff on cd for me so I can upload it for you all.
This is a win for MTK6573 Star X19i owners as I'll have the updated 2.3.6 Gingerbread firmware to release for you all root modify etc in a week or so.
Be careful with ROM studio. I believe it is not compatible with MT6573.
You want to read this: http://bm-smartphone-reviews.blogspot.com/2012_04_01_archive.html
cybermaus said:
Be careful with ROM studio. I believe it is not compatible with MT6573.
You want to read this: http://bm-smartphone-reviews.blogspot.com/2012_04_01_archive.html
Click to expand...
Click to collapse
That's what I read and did to get my scatter as I used cat then used the program linked in that thread to generate the scatter.
Dear Friends,
Need help please. I have installed another custom rom that was not meant for I9300 and now the EFS is corrupted. I tried installing orignal rom using ODIN but geting boot loop and the phone is not booting. On going into recovery i can see an error efs/ corupted or something like that. I have the backup of my EFS folder in tar.gz format however dont know how to install the same and recover my phone as not able to boot to android.
Please help me if someone can work it out. My phone has just 3 days of warranty left and it does not shows rooted anywhere except the count of installation is about 32 and rom says official and kernel says custom.
Please if someone can help me restore my phone back in working condition i shall always remain thankfull.
Regards,
Mush
mush2004 said:
Dear Friends,
Need help please. I have installed another custom rom that was not meant for I9300 and now the EFS is corrupted. I tried installing orignal rom using ODIN but geting boot loop and the phone is not booting. On going into recovery i can see an error efs/ corupted or something like that. I have the backup of my EFS folder in tar.gz format however dont know how to install the same and recover my phone as not able to boot to android.
Please help me if someone can work it out. My phone has just 3 days of warranty left and it does not shows rooted anywhere except the count of installation is about 32 and rom says official and kernel says custom.
Please if someone can help me restore my phone back in working condition i shall always remain thankfull.
Regards,
Mush
Click to expand...
Click to collapse
It is essential that you have a backup of the EFS partition and a way to place it back - the first two ways that I would think about are:
a) use a good recovery - like Philz recovery, that has commands to restore EFS
b) if the format of the backup is not exactly right you might be able to boot in recovery and use ADB commands.
xclub_101 said:
It is essential that you have a backup of the EFS partition and a way to place it back - the first two ways that I would think about are:
a) use a good recovery - like Philz recovery, that has commands to restore EFS
b) if the format of the backup is not exactly right you might be able to boot in recovery and use ADB commands.
Click to expand...
Click to collapse
Code:
su
umount /efs
dd if=/sdcard/efs.img of=/dev/block/mmcblk0p1 bs=4096
reboot
Ver3go said:
Code:
su
umount /efs
dd if=/sdcard/efs.img of=/dev/block/mmcblk0p1 bs=4096
reboot
Click to expand...
Click to collapse
I am new to adb commands. Will phylz recovery help me enter the commands? if yes then i shall be replying with the sd card efs tar file name. Will then you be able to guide me with the commands based on the tar file?
Thanks all of you in advance.
Mush
mush2004 said:
I am new to adb commands. Will phylz recovery help me enter the commands? if yes then i shall be replying with the sd card efs tar file name. Will then you be able to guide me with the commands based on the tar file?
Thanks all of you in advance.
Mush
Click to expand...
Click to collapse
No for ADB you boot into recovery, connect your computer via USB and run the ADB commands from either Linux Terminal or Windows Command Prompt.
The tool here:
http://forum.xda-developers.com/showthread.php?t=1703488
May help if you're new to adb.
Otherwise it's a case of downloading and installing the drivers for your phone and the Android SDK http://developer.android.com/sdk/index.html
Thanks for all your replies.
Just wanted to confirm if i have the efs backup in sd card as under folder backup_efs and there are two files in tar.gz format will i be able to use the phylz recovery to use this replace my efs folder? if yes then can you guide me the steps please.
Regards,
Mush
mush2004 said:
Thanks for all your replies.
Just wanted to confirm if i have the efs backup in sd card as under folder backup_efs and there are two files in tar.gz format will i be able to use the phylz recovery to use this replace my efs folder? if yes then can you guide me the steps please.
Regards,
Mush
Click to expand...
Click to collapse
I do not remember right now what creates an backup_efs folder but it really does not matter that much - the tar.gz is a "file archive" and .img is usually a partition image. Each could have minor advantages - the .img also contains the entire filesystem of the partition (and will work easier if the filesystem is bonked) but a tar.gz backup is more versatile when you have bad sectors or a changed partition.
Under an advanced recovery like Philz you would just navigate some menus and try to restore the EFS - see the info in those specific threads.
Under ADB you need to have stuff (drivers and some programs) installed in your PC, you connect the phone on USB and you run ADB commands from the command line.
my device intex cloud m6 1gb ram 8gb rom is not rooting.Please tell how to root
How to root Intex Cloud M6 8gb and 16gb smartphones.
Hello there,
This query was posted a long time ago by you and i am not sure if you have found the solution or not. But as far as i am aware, it is pretty hard to root this device. It runs on a Spreadtrum chipset sc7731. However, recently i figured out how to root this device.
It seems like that the device's default.prop file comes with a configuration :
Code:
ro.secure=1
which makes it impossible to root this device with absolutely any rooting software out there including the one-click apps.
To be able to root this device, the only efficient way is to replace the stock recovery with a custom one, deleting the default su binary file inside the /system/xbin folder as well as in the /system/bin folder, installing the SuperSU.zip file and finally by installing the Kingroot apk which will ultimately root the device.
I personally prefer the TWRP but there is no official release out there for this device. So, i ported a custom recovery for it in my spare time ( It may appear somewhat ridiculous but i had nothing more interesting to do so i changed the layout :silly
I have attached the recovery file below.
After you have downloaded the recovery as well as the SuperSU.zip, here are the steps to root it:-
Download the minimal adb fastboot for windows. You may google it, its available easily. (It turns out it may be the only tool that may work effectively in case your device is not getting recognized by any other adb.)
Rename the recovery as twrp and place it inside the Minimal adb and fastboot folder.
Connect the device via a USB cable and make sure adb debugging is on inside the developer options.
Now open the Minimal adb and fastboot tool and type the following commands inside the prompt:-
Code:
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot
Type the commands in the exact sequence. Your device will boot normally. Now, time to checkout the recovery. Type the following command inside the prompt.
Code:
adb reboot recovery
In a few seconds, you will have the custom twrp booted in front of you. Now, open the Mount tab inside the recovery and check the system option within it.
Head back to the recovery homescreen and open the Advanced tab which is followed by opening the File Manager tab.
Inside the file manager, follow the path to the pre-existing su binary file, i.e /system/xbin and delete it. Do the same with the su file present on /system/bin.
Now, head back to the recovery home ,open Install tab and select the SuperSU.zip wherever you placed it and swipe to confirm the installation.
Reboot system. (It will probably boot without the logo so don't worry if it does.)
Now Google the Kingroot.apk, download it and install it. Give it a run, it will probably fail.
So get rid of the other superuser app i.e, SuperSU app via the option present inside it, i.e "Cleanup to install other superuser app" or something like that.
After a few seconds, it will disappear from the device and probably the same might happen with the Kingroot app.
Reboot the device.
Re-install the Kingroot app and run it again.
Congrats! You just rooted your device. Go ahead and check the root via an app like Rootchecker.
Here is the custom recovery file: -
HTML:
https://adarshkushwah.github.io/Custom-recovery-for-Intex-Cloud-M6-8gb-and-16gb/
If you have any query regarding this, do let me know. :good:
(I would be glad if you or anyone who finds this post useful would thank me) Cheers!