Hey i just wanted to know if i flash sammy deodexeded 4.3 rom on my s3, does it remove the compatibility of having the Samsung Galaxy Gear connected to my device. I am just not sure about flashing roms by now.
Sent from my GT-I9300 using Tapatalk
Of course you can flash them if only it supports gear... U can just ask in the thread if it is supported by the rom or not...
Sent from my GT-I9300
Related
I have successfully bypassed hardbricking from rom manager on my galaxy gio and made a guide about how to do that. You are probably thinking right now "but wait, ace and gio are different phones! This can't work!" Well, wrong. This has also been confirmed to work on galaxy fit. So i need someone to test rom manager my safe way (which is 99.9% safe). My tester needs the following:
A Samsung galaxy ace, rooted and vem installed.
Have the ability to take screenshots.
Want to prevent hardbricks from incorrectly using rom manager
Please pm me if you're interested. I will give you instructions from there.
Sent from my jelly bean
Hi, i think that Gio and Ace hv working ROM Manager now becoz we hv official support now?
(Maybe im wrong, but i will never touch that freak again )
Sent from my GT-S5830 using Tapatalk 2
ROMFlasherAce said:
Hi, i think that Gio and Ace hv working ROM Manager now becoz we hv official support now?
(Maybe im wrong, but i will never touch that freak again )
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
No, you make rom manager use your current recovery and configures to use that one.
Sent from my jelly bean
I use it day to day safely.
Sent from my GT-S5830 using Tapatalk 2
NathanBookham said:
I use it day to day safely.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Nice. But some people don't
Sent from my jelly bean
Stop posting stuff like this. Rom Manager isn't 100% compatible with ace yet. It will brick any ace on stock firmware (you know, the firmware EVERY NEW USER STARTS WITH WILL BRICK WITH ROM MANAGER)
Rom Manager requires a custom kernel and cwm5 installed to have a chance of working brick free.
dxppxd said:
Stop posting stuff like this. Rom Manager isn't 100% compatible with ace yet. It will brick any ace on stock firmware (you know, the firmware EVERY NEW USER STARTS WITH WILL BRICK WITH ROM MANAGER)
Rom Manager requires a custom kernel and cwm5 installed to have a chance of working brick free.
Click to expand...
Click to collapse
Yes. I was thinking of writing the guide about just that you described here.
Sent from my jelly bean
TThe rom manager included in CM7 official does not brick.
But tge one which I dl from play store bricked my phone.
I guess you need CWM compatible kernel before using.
Sent from my GT-S5830 using Tapatalk 2
galaxyace152 said:
TThe rom manager included in CM7 official does not brick.
But tge one which I dl from play store bricked my phone.
I guess you need CWM compatible kernel before using.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
You need a cwm compatible kernel and cwm installed, yes.
Sent from my jelly bean
Hi,
I am scared to try to flash the I9100P with the I9100 custom ROM because it might brick!
Is it safe? I am planning to use I9100 ROM with CM kernel.
Sent from my GT-I9100 using Tapatalk
UnwiredDroid said:
Hi,
I am scared to try to flash the I9100P with the I9100 custom ROM because it might brick!
Is it safe? I am planning to use I9100 with CM kernel.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Every custom ROM, kernel or mods meant for GT I9100 will work perfectly for your phone (GT I9100P)
The only thing will not work is the NFC right?
Sent from my GT-I9100 using Tapatalk
UnwiredDroid said:
The only thing will not work is the NFC right?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Yes but there is a patch that will make NFC also work.
You need to search (advance search) Android development section for "NFC" in topics only
Thanks, actually my unit is I-9100 and the I-9100p version belongs to a friend. I am going to flash this with SuperNexus...:victory:
Nfc patch
I'm using supernexus 2 build 4 on my S2 nfc.
Some issues.
1. Cannot save photos on sd card.
2. Nfc patch gers installed but doesn't work.
3. Battery drain issues, sometimes.
4. Siyah kernel v 5 not working on build 4 was working on build 3
I have tried many ROMs but this is really the stable one.
Thanks to faryaab
I have switched to Neat rom 4.7 (with blue ginger plus theme) and I can say that, It's really battery saving rom with allmost all the s3 features.
Smart stay, multi window, pop up video, direct call. Saving photos to ext sd card.
To enable NFC you need to install a separate Mod. I haven't tried it as I don't use it.
Sent from my GT-I9100P using xda premium
HI all!
I am at a loss here. I have searched and searched for a solution to my problem but to no avail!
Basically I have flashed CM10 on my S3 and also have Clockwork Mod recovery, I would like to go back to the stock rom with touchwiz ui on top. I have found guides online on how to flash stock roms using odin but I have a Mac and do not have access to a PC. I really need some guidance with this as cm10 is annoying me at this point and I would just prefer to go back to stock/out of the box rom. P.S. I did not back up my phone when flashing cm10.
Many thanks,
Dave
Samsung Galaxy S3 GT-i9300 international version bought from vodafone ireland if that is relevant
dkekdeokd said:
HI all!
I am at a loss here. I have searched and searched for a solution to my problem but to no avail!
Basically I have flashed CM10 on my S3 and also have Clockwork Mod recovery, I would like to go back to the stock rom with touchwiz ui on top. I have found guides online on how to flash stock roms using odin but I have a Mac and do not have access to a PC. I really need some guidance with this as cm10 is annoying me at this point and I would just prefer to go back to stock/out of the box rom. P.S. I did not back up my phone when flashing cm10.
Many thanks,
Dave
Samsung Galaxy S3 GT-i9300 international version bought from vodafone ireland if that is relevant
Click to expand...
Click to collapse
Install mobile Odin, put the Rom on an sd card. Then flash with mobile Odin.
EDIT: mobile Odin http://forum.xda-developers.com/showthread.php?t=1347899
Sent from my GT-I9300 using xda app-developers app
Does anyone know where I can get the new S3 Power Suite stock ROM?
Sent from my GT-I9300 using Tapatalk 2
Lazee Wolf said:
Does anyone know where I can get the new S3 Power Suite stock ROM?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
The latest stock rom is 4.1.2 ELKC
Sent from my GT-I9300 using xda app-developers app
Is that the one that includes the power suite features from the Galaxy note like multi-app
Sent from my GT-I9300 using Tapatalk 2
Lazee Wolf said:
Is that the one that includes the power suite features from the Galaxy note like multi-app
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes, it has the multi-window feature.
Sent from my GT-I9300 using xda app-developers app
Hi I'm trying to dual boot 4.1.2 MG4 and I'd like to run a 4.2.2 ROM along side it as 4.3 is still new and buggy could anyone please point me in the right direction of what I use as I've only seen ones for dual booting 4.2.2 Samsung Leak. I'd like to use 4.1.2 BTU MG4 and pref paranoid android 4.2.2
Thanks
Sent from my GT-I9300 using Tapatalk 4
Search for googy max's dual boot kernel in the original development thread...
Sent from my GT-I9300 using xda app-developers app
Does that actually work with MG4 4.1.2 when I was in the thread it says clearly that it works on 4.2.2 leak...
Sent From My GALAXY S3 I9300 via Tapatalk4
Nothing works with 4.2 leaks as there's no kernel source for 4.2.
It works on all sammy 4.1.2 and all AOSP 4.2.2
Sent from my GT-I9300 using Tapatalk 4
So I can use it with the 4.2.2 paranoid android and still keep my ROM will it mess up anything with my efs since I'm on MG4 thanks for the reply
Sent From My GALAXY S3 I9300 via Tapatalk4
It should be fine so long as you don't flash additional basebands from within the second rom.
Sent from my GT-I9300 using Tapatalk 4
How can I tell if this will do different basebands? And is old root ok for MG4 or is there a updated root sorry for the questions I was fine before MG4 came along I haven't flashed ROMs since
Sent From My GALAXY S3 I9300 via Tapatalk4
You can only have ONE baseband on the phone. Aosp roms don't come with a baseband.
Root as before
Sent from my GT-I9300 using Tapatalk 4
Thank you very much for your help I just don't want to screw up my phone I'll root tomorrow after a full charge
Sent From My GALAXY S3 I9300 via Tapatalk4
Sent from my LG-P880 using XDA Free mobile app
my friend has a galaxy s3 with android 4.3 and knocx bootloader how to install custom recovery and rom on it in my dads s3 with android 4.1.2 was easy help me to install custom rom it runs XXUGNA8 Android 4.3 version
The i9300 doesn't have knox. Either you are mistaken or have another model, in which case you've posted in the wrong forum.
Sent from my GT-I9300 using Tapatalk