How install. Omap44 driver win 8.1?? Device manager : unkown device.
prannk said:
How install. Omap44 driver win 8.1?? Device manager : unkown device.
Click to expand...
Click to collapse
Hi prannk, perhaps this could help you:
http://forum.xda-developers.com/showthread.php?p=50929757
Edited: You could also try with USB 3.0 on your PC's backside (rear panel).
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
BajoPrimate said:
Hi prannk, perhaps this could help you:
http://forum.xda-developers.com/showthread.php?p=50929757
Edited: You could also try with USB 3.0 on your PC's backside (rear panel).
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
Click to expand...
Click to collapse
no changes. not working. unknown devices.
prannk said:
no changes. not working. unknown devices.
Click to expand...
Click to collapse
hey friend you could install universal adb drivers and then check it should work..
Here are the two links go check them out...
Universal Windows ADB Driver by Koush
Universal Adb Driver
Hello, my friend I'm sorry, but right now there is probably no way, how to make fastboot work on Windows 8.1. Trust me, I've tried to find a solution for many days, but at the end, I had to use borrowed netbook with Windows 7 installed on it. The problem is, that 8.1 always connects fastboot devices as "Unknown USB's". For those you simply can't install these drivers, even if you try using Safe mode, or if you start system with allowance of unsigned drivers. Basicly what's happening is, that windows thinks, you want to reinstall USB driver, not fastboot driver.
I was thinking about the possibility of using older virtualized system or Linux on which it should work (though you won't find many guides). Keep on trying and don't give up You'll manage to unlock it eventually. The question remains, on which system it would be.
Related
Hi there
I am looking for the USB driver. I have downloaded the Mobile Support Tool for PC from LG website, however, when installing the file, I had a compatibility problem...I am using Windows 7 32 bit.
Appreciate if anyone can help.
Thanks
You can find the drivers on the sd card of the phone. Also if you download the LG Mobile update you can Download the usb driver. Not the LG Mobile software updater.
Open the program, click on install usb driver and then select p500
If for some reason you can't install, i attach the usb driver folder founded in my p500
Thanks. I will give it a go.
Thanks for the drivers
Woo hoo!
Thanks so very much for this!
I tried a bunch from different sources, since LG's b2cappsetup wouldn't install on my computer.
win7 ultimate 64.
Strange.
I owe you a beer!
I am having trouble installing drivers for my P500 on Windows XP using the B2CApp.
It installs 3 of them:
LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.1.exe
LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0.exe
LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0.exe
But even then, my phones not detected on the PC.
Btw, I must mention that I am stuck on the fastboot screen, while trying to do a NANDroid backup, after ROM Manager screwed up with my Custom Recovery installation.
Any idea if the above 3 are enough for me to proceed with the below link, or is there another LG fastboot driver that I might be missing? :
http://forum.xda-developers.com/showthread.php?t=1088046
EDIT:
I have fixed the issue. Got the drivers mentioned in this thread:
http://android.modaco.com/topic/324744-waiting-for-devicefastboot/#
@paganwinter
thanks for your post update dt. 19 Jul 2011. It saved my life.
USB Problem solved
paganwinter said:
I am having trouble installing drivers for my P500 on Windows XP using the B2CApp.
It installs 3 of them:
LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.1.exe
LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0.exe
LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0.exe
But even then, my phones not detected on the PC.
Btw, I must mention that I am stuck on the fastboot screen, while trying to do a NANDroid backup, after ROM Manager screwed up with my Custom Recovery installation.
Any idea if the above 3 are enough for me to proceed with the below link, or is there another LG fastboot driver that I might be missing? :
http://forum.xda-developers.com/showthread.php?t=1088046
EDIT:
I have fixed the issue. Got the drivers mentioned in this thread:
http://android.modaco.com/topic/324744-waiting-for-devicefastboot/#
Click to expand...
Click to collapse
Has worked.Thanks
sumansur2008 said:
Has worked.Thanks
Click to expand...
Click to collapse
drivers are only needed for adb to work, since latest franco kernel devices support ums "on the fly" without crappy driver install.
Sorry for asking this stoopid,noob question,but I never used PC Suite.
So,I just re-installed Windows XP and all is quite smooth. So,since I have a stable Windows OS now,I'm willing to flash the new baseband (finally,huh? ).
Do I only need to install LG PC Suite and all drivers will be installed(For using KDZ/LGMDP),or I need external tools/downloads/etc.? If so anyone kindly post a link here.
Only the drivers should be adequate.
But sorry I forgot the url where I got them.
I didnt use LG PC Suite, coz then I dont need it
PS. I admire your great work Ciaox
FrenchOnly said:
Only the drivers should be adequate.
But sorry I forgot the url where I got them.
I didnt use LG PC Suite, coz then I dont need it
PS. I admire your great work Ciaox
Click to expand...
Click to collapse
Thanks!
I have 2 drivers in my PC right now, I'm using win7 dont know if it works for XP.
But if you want to try I'd glad to share them with you through dropbox.
If it's OK then I'll PM the details
FrenchOnly said:
I have 2 drivers in my PC right now, I'm using win7 dont know if it works for XP.
But if you want to try I'd glad to share them with you through dropbox.
If it's OK then I'll PM the details
Click to expand...
Click to collapse
Hmm... AFAIK win7 drivers are different
Found this http://www.lg.com/uk/support/mc-support/mobile-phone-support.jsp. Can anyone confirm this is working?
Well then...
Here you go..might found what you're looking for here
edit...
Yes I got mine from there
Don't install other devices' drivers and be careful with that goddamn LGMDP... I bricked my phone with that
onlymeipse said:
Don't install other devices' drivers and be careful with that goddamn LGMDP... I bricked my phone with that
Click to expand...
Click to collapse
I'm not installing other devices' drivers
BTW I just noticed that LGMobile update program isn't so stable. Firstly it changes automatically to Korean,then has some issues with Visual C++...
FrenchOnly said:
Well then...
Here you go..might found what you're looking for here
edit...
Yes I got mine from there
Click to expand...
Click to collapse
there (my link)?
Make sure you disable LGE Modem on windows Device Manager, right click on it should do the work.
Don't know about that but seems being plugged in while the LGE Modem is still active could interrupt the debugging process.
CMIIW
edit.
Yes both yours and my link.
Try my link, they are easily listed.
Phone is recognize from LGMobile update tool. Had some (resolved) issues with drivers,but now that tool recognizes the phone,so it's all ok? i wanna be sure
Usually I ran adb command just to make sure
Driver Issues
I am having trouble installing drivers for my P500 on Windows XP using the B2CApp.
It installs 3 of them:
LGUnitedMobileDriver_S4981MAN32AP22_ML_WHQL_Ver_3.2.1.exe
LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0.exe
LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0.exe
But even then, my phones not detected on the PC.
Btw, I must mention that I am stuck on the fastboot screen, while trying to do a NANDroid backup, after ROM Manager screwed up with my Custom Recovery installation.
Any idea if the above 3 are enough for me to proceed with the below link, or is there another LG fastboot driver that I might be missing? :
http://forum.xda-developers.com/showthread.php?t=1088046
When I connect my phone and hit the first command on cmd prompt:
Code:
fastboot erase recovery
I get the following:
Code:
< waiting for device >
UPDATE:
I have fixed the issue. Got the drivers mentioned in this thread:
Anyone else stuck with Windows XP not recognizing the device even after the B2CApp installation, try these drivers:
http://android.modaco.com/topic/324744-waiting-for-devicefastboot/#
ADB seems to work, but in fastboot I get a pop up says that the device couldn't be recognized by Windows and Device Manager gives
Windows has stopped this device because it has reported problems. (Code 43)
Click to expand...
Click to collapse
Now, I don't know how the underlying hardware works but I'm fairly sure that if ADB and other USB functions work, fastboot should work as well. Any ideas?
scy1192 said:
ADB seems to work, but in fastboot I get a pop up says that the device couldn't be recognized by Windows and Device Manager gives
Now, I don't know how the underlying hardware works but I'm fairly sure that if ADB and other USB functions work, fastboot should work as well. Any ideas?
Click to expand...
Click to collapse
ahhh...the famous code 43. The problem with this code is its pretty generic. It could be hardware or could be drivers. Basically what happens is Winblows is having an issue with the device that is connect, in this case your phone. Seen this one to many times. Try rebooting your computer first of all and try again. If you are still getting the try updating the HTC drivers for your phone. If you do this make sure to remove old drivers and then reinstall the new drivers. That should take care of the issue
clmowers said:
ahhh...the famous code 43. The problem with this code is its pretty generic. It could be hardware or could be drivers. Basically what happens is Winblows is having an issue with the device that is connect, in this case your phone. Seen this one to many times. Try rebooting your computer first of all and try again. If you are still getting the try updating the HTC drivers for your phone. If you do this make sure to remove old drivers and then reinstall the new drivers. That should take care of the issue
Click to expand...
Click to collapse
It does seem to be my computer and not the phone thankfully (works on another PC). I am using Koush's universal drivers and they've previously worked. On the USB 2.0 ports I get the device enumeration failed thing, and in the USB 3.0 ports (different board, uses a Renesas controller) it appears but gives me
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Click to expand...
Click to collapse
I've tried reinstalling the drivers and no dice. I can't use the HTC drivers since I'm on Windows 8.1
I guess worst case I'll just patch it through to an XP virtual machine or something.
Yea win 8 has issues. I use Linux personally. That should resolve your issue using xp.
Sent from my Rezound using xda app-developers app
tburns said:
Yea win 8 has issues. I use Linux personally. That should resolve your issue using xp.
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Same here Debian and DSL all the way but yeah a xp VM should do the trick then. Haven't played with 8 or 8.1 at all so I can even point you in a direction for that. Easy solution as well....use Linux
Sent from my ANDROFLY REZOUND using xda app-developers app
scy1192 said:
It does seem to be my computer and not the phone thankfully (works on another PC). I am using Koush's universal drivers and they've previously worked. On the USB 2.0 ports I get the device enumeration failed thing, and in the USB 3.0 ports (different board, uses a Renesas controller) it appears but gives me
I've tried reinstalling the drivers and no dice. I can't use the HTC drivers since I'm on Windows 8.1
I guess worst case I'll just patch it through to an XP virtual machine or something.
Click to expand...
Click to collapse
i know this is an old post, but the driver posted here got me back in business!!! Its a phone for the kiddos, and it was missing rh boot.img and all but 1 of my computers runs 10. This got the win 7 adb driver working just fine!!!
Hi there
I have seen some posts where users are having difficulty connecting Xperia to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone to the PC and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
Sony Xperia Drivers for ADB.
DOWNLOAD FROM HERE
reserved
it works on win 8.1?
jatinrungta said:
it works on win 8.1?
Click to expand...
Click to collapse
No,I dont know who reads this tutorials anyway wnen there already 10 of them for this particular issue.
Sent from my Xperia U using Tapatalk
XperianPro said:
No,I dont know who reads this tutorials anyway wnen there already 10 of them for this particular issue.
Sent from my Xperia U using Tapatalk
Click to expand...
Click to collapse
true that, thought it would work beacuse it is posted this week
XperianPro said:
No,I dont know who reads this tutorials anyway wnen there already 10 of them for this particular issue.
Sent from my Xperia U using Tapatalk
Click to expand...
Click to collapse
jatinrungta said:
true that, thought it would work beacuse it is posted this week
Click to expand...
Click to collapse
These drivers are seem to work perfectly on Windows 7 and it should work just fine on any other windows!
Hnk1 said:
These drivers are seem to work perfectly on Windows 7 and it should work just fine on any other windows!
Click to expand...
Click to collapse
nope, windows 8+ is different
I'm getting a lot of problems with drivers for this device, seems Sony's guys did it just to say:
"Ok, now this device got some drivers, lets play poker :"
It's serious. To get ADB driver working was a lot of work, just got it working because our friend Ashu1307 posted this link for me ( maybe it can work for ya= http://forum.xda-developers.com/showthread.php?t=2552505)
Ok, that's nice since it was the only driver that's not working on windows 7.
I said windows 7
Now I'm on windows XP, tryied 2 machines already, and this goddam piece of **** don't have any driver working. Nothing, neither MTP, nor fastboot nor ADB nor flashmode (mass storage works, the ones I've quoted are detected, but don't work)
PC companion is another thing I'm hating. First I have to download the Web Installer, 27MB of nothing, since after the download it has to update because the sony's website offers outdated file. THen I download support zone, which detects phone but not the model.
What do I do? I'm going weird just about to break this phone on the wall, I never had so much problems on motorola's or samsung's or enen old sony ericsson's devices.
Before,my PC used to display an error whenever I tried to transfer files from my pc to my Xperia Sola.But after changing the kernel,I could transfer files with ease.So,do you think the problem in the kernel is related to this error?
I never had problem with drivers.
Trying another computer, still having the problems, I use the DoomKernel, do you think it has to do with it ?
Hi. First of all I want to excuse me that I' m asking a common thing several times threated in other posts.
I'm working now 2 days on getting another rom on my lemax 2.
I have installed the driver for the phone on my windows 7. system manager shows a propper installation. ADB driver's have been installed. The phone is in developper mode and oem and usb debugging is turned on. I switched to MTP and to PTP to make my device visible for ADB. But when I'm trying to see if my computer shows the mobile phone in CMD with the following command "adb devices" there will never be something listed! I tried already a lot... Uninstalling drvers for ADB, tried different drivers... And so on... Does anybody have an idea to help me??
Same problem here. Phone doesn't show, ADB can't connect. I am starting to get frustrated.
Most likely a problem with the usb driver, did you try another phone? I had the same problems and ended up doining it under linux afther a couple of hours messing in win10.
http://askubuntu.com/questions/659880/ubuntu-15-04-adb-fastboot-impossible-to-install
DeScheep
MOB* said:
Most likely a problem with the usb driver, did you try another phone? I had the same problems and ended up doining it under linux afther a couple of hours messing in win10.
http://askubuntu.com/questions/659880/ubuntu-15-04-adb-fastboot-impossible-to-install
DeScheep
Click to expand...
Click to collapse
Linux definitely is the better choice.
The fastboot drivers are different from the ADB drivers, and in Windows 10 you might have to switch the driver after fastbooting the phone.
It's really really silly and took me hours to find out.
You can change them in device manager, find the USB device there and update its driver. You don't need one from the web, just take the fastboot one from the list that Windows offers.
Sörnäinen said:
Linux definitely is the better choice.
The fastboot drivers are different from the ADB drivers, and in Windows 10 you might have to switch the driver after fastbooting the phone.
It's really really silly and took me hours to find out.
You can change them in device manager, find the USB device there and update its driver. You don't need one from the web, just take the fastboot one from the list that Windows offers.
Click to expand...
Click to collapse
I have no second android phone to test. But I tried already on OS Win 7 & 10 with different drivers on Win 7 as well. On win 10 the driver was already given by Windows, no need to install. I think that the problem has something to do with the phone, but I can't find the problem. It must be something with authorisation, that Win Os will recognize the Leeco correctly to have access.
I finally found a good working driver for WIN 10. I found it from a Chinese chatting group, so use it at your own risk.
Below is the share link.
https://drive.google.com/file/d/0BxNNPNS50QQiUk50YTliT2p5Mmc/view?usp=sharing
You will need to boot your phone into bootloader, connect to computer, manually switch the diver via 'Browse my computer for driver software" -> 'Let me pick fromm a list of device drivers on my computer"-> "Have Disk".
Hi all,
After reinstalling Windows7 32-bit on my laptop, I ran into the same issue as you guys here. What I did was to install pdanet and the adb interface worked. However, I could not get into the QDLoader 9008 and also Diagnostic Driver was not working, simply the drivers could not get installed no matter what I tried. I searched quite a lot of time how to get make it work and looks like there was a zip "QDLoader HS-USB Driver". You can google it and it has 32-bit and 64-bit installations. I am not very sure if I had to install pdanet but that was the first step to make it work, at least to have adb.
I'm sure that you guys found the answer already, but I wanted to help others as well if they run into the same issue.
valy_cta said:
Hi all,
After reinstalling Windows7 32-bit on my laptop, I ran into the same issue as you guys here. What I did was to install pdanet and the adb interface worked. However, I could not get into the QDLoader 9008 and also Diagnostic Driver was not working, simply the drivers could not get installed no matter what I tried. I searched quite a lot of time how to get make it work and looks like there was a zip "QDLoader HS-USB Driver". You can google it and it has 32-bit and 64-bit installations. I am not very sure if I had to install pdanet but that was the first step to make it work, at least to have adb.
I'm sure that you guys found the answer already, but I wanted to help others as well if they run into the same issue.
Click to expand...
Click to collapse
Thanks a lot for sharing it !!! This helped me A LOT !! :fingers-crossed: :fingers-crossed: :fingers-crossed:
I have the same problem. Tried different drivers, two computers, win10 and win7. Nothing helps...
midirt said:
I have the same problem. Tried different drivers, two computers, win10 and win7. Nothing helps...
Click to expand...
Click to collapse
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
is there any solution for this problem........my device le eco letv 2s is not listed in the adb devices.....can anyone help me....
Dhatchina said:
is there any solution for this problem........my device le eco letv 2s is not listed in the adb devices.....can anyone help me....
Click to expand...
Click to collapse
if you're sure it's not a driver issue you can try the following (solved the problem for me):
on your windows machine navigate to "c:\users\<insert your user name here>\.android" and delete the file "adbkey".
either jump directly to the folder or turn on hidden/os files in explorer and navigate there.
now plug in your phone, the rsa-key dialog should pop up.
if not, that wasn't your problem.
btw. i'm using "universal adb installer".
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
It helpded me a lot. Thanx.
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
Great, man.!. It works for me
THIS Method Works For LeEco Le Max2
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
This Method Works Perfectly.... After Enabling the AT port.. the drivers begin installing immediately. Have Patience. They will all install.
LeEco le2 is not showing up under adb devices list... tried damn lot of drivers ...What do I do??
You should post a Screenshot of your devicemanager becsuse that information is not enough.
Gesendet von meinem Le X820 mit Tapatalk
Install ADB Driver installer 2.0
dhankhar13 said:
LeEco le2 is not showing up under adb devices list... tried damn lot of drivers ...What do I do??
Click to expand...
Click to collapse
adbdriver.com/downloads/
Use this above link
1 ) Download adb driver installer software zip file
2 ) Extract the zip file
3 ) Install & Run a adb driver installer.exe file
my le2 doesn't show up in fastboot mode, but shows up once booted into system. Any idea?
Thanks!
GC-82 said:
Have you tried dialing *#*#76937#*#* and enable AT port, this worked for me
Click to expand...
Click to collapse
This worked for me too!!!:good::good::good: