I need the original SE chargemon file for the X10 mini 2.1.1.A.0.6. I accidentally overwrote it and I don't have a backup. It is located in the /system/bin directory:
/system/bin/chargemon
Thanks a lot!
here
hey brother nunca eh publicado nada pero quiero ayudar, aki tienes el original
megaupload.com/?d=UQDICJMF
- Ese no es el archivo original de SE. Ese es el del xrecovery que sobreescribió al original.
- That's not the original SE file. That's the xrecovery one that overwrote the original.
sorry men, no me recordaba que ayer mismo instale xrecovery. Y porque necesitas el original
- Para hacer que con el xrecvoery instalado, pueda cargar el telefono apagado.
- To make the phone charge when turned off even with xrecovery installed.
http://forum.xda-developers.com/showpost.php?p=11549855&postcount=5
en ese post que pusiste sirver el chargemon, dice que hay uno original y el de xrecovery
I found it here! -> http://rapidshare.com/files/4493385...h_genyt_s_fix_for_charge_batt_staying_off.zip
i have a question, if a take and put this file en system/bin, my xrecovery will cant work??
forget this question.
i not say nothing
ok, is work, thank zeroise
Hi guys. Sorry my bad English.
I have ICS ICS Iberia, with the open bootloader, root, BusyBox and CWM.
I want a working kernel available pending completion CM9, for system tuning and overclocking.
What recommend me? What is the more stable and less bugs have?
I have these doubts after reading many tutorials.
Do they work all with the official firmware Iberia?
If i want to return to the kernel officer.
I can get the official kernel with a full official firmware update, and restore using PC Companion or FlashTool, or done differently?.
I have no clear method to do so, since having installed CWM, the Inteks explains who is from FlashTool, copy the kernel to it and press FlashBoot the beam mode and the other kernel that I might want, the [KERNEL] [Update - Stock WIFI restore] Stock init.d ICS w + root + cwm support! [Final] says you have to remove the two files CWM removed it (recovery.tar and chargemon).
I feel if they are stupid questions. One week I've been looking and looking and I
Hola chicos. Lo siento mi mal inglés.
Tengo ICS ICS Iberia, con el bootloader abierto, root, BusyBox y CWM.
Quiero instalarme un kernel a la espera de la versión final de CM9, para optimizar el sistema y hacer overclocking.
¿Cual me recomendáis?¿cual es el más estable y que menos bugs tiene?
Tengo estas dudas después de leer muchos tutoriales.
¿Trabajan con el firmware de Iberia?.
En caso quiera volver al kernel oficial, ¿Flasheando desde el PC Companion (recuperando firmware), o desde el flashtool recuperaría el kernel oficial, o hay que hacerlo de otra forma?.
Tampoco tengo claro el método para poder hacerlo, ya que al tener instalado CWM, el Inteks explica que es desde flashtool, copiar el kernel al mismo y pulsar en modo flashboot el rayo, no diciendo nada de si hay qeu ekliminar o no los dos archivos del CWM.
El otro kernel que me podría interesar, el [KERNEL] [Update - Stock WIFI restore] Stock ICS w init.d support+root+cwm! [Final], comenta que hay que eliminar el CWM, eliminando los dos archivos del mismo (recovery.tar and chargemon).
Siento si son preguntas tontas. Llevo ya una semana mirando y mirando y sigo a cada día que pasa con más dudas en lugar de menos.
Click to expand...
Click to collapse
Dude...cm9 kernels won't work on stock based roms and official Xperia Rom...for stock based or official Rom use Shardul Seth's kernel...and I guess Iberia is misspelled for Xperia...right? So if you have stock based Rom...try Shardul kernel or team alliance(nightelf) kernel...I suppose you want info only for ICS.
Sent from my MT11i using XDA
ENGLISH:
Hello, you've said you're waiting for final CM9 kernel, however, you won't be able to use CM9 kernels on stock roms. For stock roms you can use "Stock init.d ICS w + root + cwm support" kernel or Night-Elf one which has OC settings. If you have DooMLoRD CWM installed, you have to do this:
Steps:
1. Follow this guide to install official ICS + root
(Do not install CWM)
2. If you already have DooMLoRD/nAa CWM, go to /system/bin with any root explorer and delete recovery.tar and chargemon
3. Power down device and get into FASTBOOT MODE -> switch off device hold menu key & plugin usb. (LED notification turns BLUE)
4. check fastboot with "fastboot devices"
5. flash boot image
fastboot flash boot boot.img
6. Reboot with "fastboot reboot"
7. Enjoy!
Click to expand...
Click to collapse
You can also do it via flashtool, do steps 1 and 2, then turn off the device into fastboot mode, conect it to pc holding menu key (led notification turns blue), open flashtool, click at flash button, select fastboot mode, and then Select kernel to flash.
Continue looking for info, I'm human and I can be wrong.
ESPAÑOL:
Buenos días, según cuentas estás esperando a la version del kernel de CM9, sin embargo te comento que no podrás usar kernels de CM9 en stock roms, para estas roms, puedes usar el kernel que has dicho "Stock init.d ICS w + root + cwm support" o incluso el de Night-Elf para ICS que tiene soporte para OC. Según estoy viendo, para instalar cualquiera de ellos teniendo CWM ya instalado, tienes que hacer esto:
Steps:
1. Follow this guide to install official ICS + root
(Do not install CWM)
2. If you already have DooMLoRD/nAa CWM, go to /system/bin with any root explorer and delete recovery.tar and chargemon
3. Power down device and get into FASTBOOT MODE -> switch off device hold menu key & plugin usb. (LED notification turns BLUE)
4. check fastboot with "fastboot devices"
5. flash boot image
fastboot flash boot boot.img
6. Reboot with "fastboot reboot"
7. Enjoy!
Click to expand...
Click to collapse
También puedes mediante flashtool, haz los dos primeros pasos igual, apaga el movil en modo fastboot, conectalo al pc con la tecla menu pulsada, (el led se vuelve azul); en flashtool le das al rayo, a fastboot mode, y le das a Select kernel to flash.
Sigue buscando información porque puedo estar equivocado, un saludo
Click to expand...
Click to collapse
Sorry for poor english, only trying to help
OC kernels working with stock ics: inteks, and alliance kernel (formerly nightelf).
shardul seth kernel has not OC.
alliance kernel has most features. but, careful, it flashes its own wifi modules, if you wanna go back to stock, or another kernel, you must flash stock wifi modules (howto?) :
easier way is flashing shardul-seth kernel, that overwrites wifi modules with stock ones. then you can flash kernel you like.
offtopic: when you read about deleting 2 cwm files, is because there are two ways of installing cwm. copying those two files to system (aimed to locked bootloader), or having cwm integrated into kernel.
custom kernels: inteks, alliance and shardul, already have cwm inside, so you must delete those two files, to use it. if not, when you press vol -, you will load /system/bin cwm.
in one sentence: you only need recovery into system/bin if you use stock kernel.
Los kernels para ICS oficial que incluyen OC son inteks y alliance kernel (antes nightelf) el kernel shardul no tiene OC.
alliance kernel es el que tiene la mayoria de caracteristicas pero cuidado, incluye al flashearlo, sus propios modulos wifi. esto es, si quieres VOLVER al stock, o a cualquier otro, debes flashear los modulos wifi stock. la forma mas facil es meter el shardul, ya que sobreescribe los modulos wifi por los stock, y despues meter el kernel que tu quieras..
lo que leiste de borrar los dos archivos de CWM, es porque hay dos maneras de tener cwm en el movil: tenerlo en system/bin (dirigido a bootloader bloqueados), o tenerlo integrado en un custom kernel.
los custom kernels: alliance kernel, inteks, y shardul ya traen el CWM incluido por lo que si lo tienes en system, cargara ese y no el del kernel.
resumiendo, solo necesitas el cwm en system/bin si usas el stock kernel. asi no dependes de la rom para acceder a cwm.
Click to expand...
Click to collapse
Hello,
I have a chinese console with android 2.1 (the Yinlips G18) and the recovery mod e3. I want to install an update.zip but I have this message : "E: Signature verification failed". So I want to disable the signature verification. But how I can do that safely (Modding or replace this recovery with cwm) ?
PS : Sorry for my english, I'm french.
Thanks for your help.
tomhoogata said:
Hello,
I have a chinese console with android 2.1 (the Yinlips G18) and the recovery mod e3. I want to install an update.zip but I have this message : "E: Signature verification failed". So I want to disable the signature verification. But how I can do that safely (Modding or replace this recovery with cwm) ?
PS : Sorry for my english, I'm french.
Thanks for your help.
Click to expand...
Click to collapse
You cannot disable this because your bootloader is locked. You have to sign the update.zip then install it. Here in XDA you can find a program who sign files!
Motorola is doing this in the devices, and it's pretty difficult install update.zip!
Thanks for your reply, I understand better.
I have build an update.zip from an other. I've signed my zip witgh autosign or Sign++ but this don't work.
Where is the problem ?
tomhoogata said:
Thanks for your reply, I understand better.
I have build an update.zip from an other. I've signed my zip witgh autosign or Sign++ but this don't work.
Where is the problem ?
Click to expand...
Click to collapse
Maybe the problem is how you signed it. Try changing the sign using another program. What are you going to flash, anyway?
With a locked bootloader the only update zips that will work are ones signed by your phones OEM. To flash anything else you will need a modded recovery image and unlocked bootloader.
Sent from my Inspire 4G using Tapatalk 2
So I can't to flash. But how I can sign with my chinise console (if I understood all what your said) : I have tried to sign my zip with other utilites but this not pass on my device : E: Signature verification failed ...
Sent from my U20i using XDA
tomhoogata said:
So I can't to flash. But how I can sign with my chinise console (if I understood all what your said) : I have tried to sign my zip with other utilites but this not pass on my device : E: Signature verification failed ...
Sent from my U20i using XDA
Click to expand...
Click to collapse
Thats the thing You cant sign it. The only sig that it will accept is one from your OEM. You will need to make or find a custom recovery img for your device. That is one of the issues with getting a off brand device not alot of people here work on China based devices due to them not being available everywhere and some of them not having official Android versions
Check here
http://forum.xda-developers.com/showthread.php?t=1601194
Thanks for your help.
I have seen the post of snakeman before but I'm a beginner and I don't see what on this post can to hep me (sorry for my ignorance).
I'have found this (gp32spain bitrider G18) :
"Añado aplicación para realizar el volcado del sistema para aquellos que les llegue la consola con una versión de firmware superior a la disponible y quieran colaborar:
Instrucciones:
- Rootea la consola
- Instala la aplicación adjunta
- Ejecuta la aplicación y espera a que termine, puede llevar unos minutos.
- Si todo ha ido bien terminará con un mensaje: "Success!!!" y los archivos estarán en la carpeta FirmwareDump de la micro-SD.
- Copia la carpeta FirmwareDump de la micro-SD al PC, comprímela y házmela llegar.
La carpeta contiene dos archivos "boot.img" (el kernel) y "system.tar" (el resto del S.O.).
La aplicación es bastante simple y no está muy pulida en cuanto a lo que a interfaz de usuario se refiere."
I have recovered boot.img and system.tar . I can to do something with that ?
EDIT : How can I make a custom recovery img ?
There is a way to find the official keys with an other sign method ?
como puedo hacer de un system.img una system.zip para instalar via recovey?
how can i make a system.img a system.zip to install via recovey?
The original system.img does not contain the launcher because it was deleted by accident and you can only extract an image without a launcher, how could you add a launcher again and make this system flashable via recovey?
:crying:
What type of device? When you say recovery do you mean you have twrp installled?
COPIE ESTE FIRMWARE UPDATE AL DIRECTORIO RAIZ DEL ALMACENAMIENTO DEL DISPOSITIVO MOVIL (TARJETA SD) SIN DESCOMPRIMIRLO: el directorio raiz o RECOVERY es basicamente el primer lugar que aparece al abrir un explorador de archivos en el telefono en otras palabras no colocas este archivo dentro de alguna carpeta. los archivos que pueden ver el INTERFAZ DEL ALMACENAMIENTO DEL TELEFONO o GESTOR DE ARCHIVOS se encuentran en el directorio RAIZ.D
Entre al recovery dele ala occion instalar desde memoria SD y dele clip sobre el archivo ZIP que anteriormente se a copiado y el comenzara la instalacion esto para evadir el famoso SYSDLL o co.sitic.pp.
Mod translation:
copy this firmware update to the root directory of the mobile device storage (sd card) without unzipping it: the root or RECOVERY directory is basically the first place that appears when you open a file explorer on the phone in other words you don't put this file inside any file. the files that can be seen by the PHONE STORAGE INTERFACE or FILE MANAGER are located in the ROOT.D directory
Enter the recovery, give the option to install from SD memory and click on the ZIP file that was previously copied and it will begin the installation to avoid the famous SYSDLL or co.sitic.pp.