Related
i have tried holding down the volume rocker and power, as well as the up and power, and down and power, but it just keeps on starting up. is there any other way to get into recovery mode?
What phone do you have?
On AT&T SGSII SGH-I777 the correct button combination is vol+ vol- and Pwr.
Hold down all three buttons until the boot screen appears, goes black, and appears a second time. (In case it doesn't boot into recovery on the first screen.)
sniper8752 said:
i have tried holding down the volume rocker and power, as well as the up and power, and down and power, but it just keeps on starting up. is there any other way to get into recovery mode?
Click to expand...
Click to collapse
Impossible to offer any reliable assistance without knowing things like whether or not you're rooted, if rooted which ROM/kernel you're using, etc.
it continues to boot. could something be corrupt? is there another way to get around this?
i have gt-i9100 installed. it was i777 before.
sniper8752 said:
it continues to boot. could something be corrupt? is there another way to get around this?
i have gt-i9100 installed. it was i777 before.
Click to expand...
Click to collapse
If you flashed firmware for the I9100 by mistake, and the firmware contained the secondary bootloader, then the button configuration would be different than the I777. Is that what happened?
If so, then you should flash the full stock UCKH7 firmware which includes bootloaders which you can get from the Download Repository. See the link in my signature.
This is what i believe is happening. i don't believe that my phone is rooted though. i don't see any superuser apps.
If you flashed an I9100 firmware by mistake using Odin, you would almost certainly not be rooted.
Anyway, if that is what has happened to your phone, then you need to use Odin to flash back to fully stock UCKH7 Gingerbread using the full firmware flash that contains secondary bootloader and param.lfs files. You can find that in the Download Repository. If you need more assistance, just ask.
so i use this site: http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46 ? if so, which one do i use?
and thanks so much for your help! i appreciate it.
Flash the firmware under the heading I777UCKH7-CL503881 Stock Binaries. You can use either the one-click downloader or the tar.md5 file. The one click downloader is easier.
i noticed there is only a .exe. i ran this, and clicked on start, and it just said this:
<OSM> All threads completed. (succeed 0 / failed 0)
My phone is plugged in and on.
Open the exe file on your desktop. Then put the phone into download mode by:
with the phone off, hold down vol+ and vol- while plugging in the usb cable. Odin should recognize your phone. Then press start.
i don't think that three-button combo worked for me. it turns on the sg2 logo, then black screen, then the logo again, and then boots up normally.
It's not 3 buttons. vol+ and vol- but not power.
Here are the complete flashing instructions. Follow them step by step, and in order. This is for stand-alone odin, but applies to the one-click version as well, except you can ignore the steps about choosing the file, what to check, etc.
______________________________________________________________
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different. (Skip steps 6 to 8 with one-click downloader.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
Let me know if it flashes successfully.
not getting the yellow bar. it just shows the charging sign on my phone. :/
Yes of course. I'm moving too fast and not thinking.
You flashed I9100 secondary bootloader. Your recovery button combination is changed. Your download mode button combination is also changed.
OK. You can get a usb jig to put your phone into download mode. If you don't have one, you can buy one on the net.
Or... you can also boot into download mode using "adb reboot download". I havn't used this method to start an Odin flash, but I presume you would use adb to put the phone into download mode, unplug the usb cable, close the command prompt, open Odin and plug the usb cable back into the phone.
If you are unfamiliar with adb, here is a pretty good place to start learning about it.
hm, could i do this?:
BUT WHAT IF I’M/YOU’RE TRYING TO GET TO CLOCKWORKMOD RECOVERY?
1 ) Before the above you should have downloaded ROM Manager from the Android Market and Flashed ClcockworkMod REcovery. When it ask you what version you should select “Samsung T-Mobile GalaxyS2.” I know it says T-Mobile but select it anyways.
2 ) From Rom Manager you can select Reboot into Recovery OR you can turn your phone off and follow my previous top instructions.
http://forum.xda-developers.com/showthread.php?t=1409769
No. Never use rom manager on the I777.
Edit: That link is from I727 Skyrocket forums. I sure hope your phone is I777 not I727. That's what you said earlier.
Another way to try to get into download mode:
Remove the battery. Hold down one or both of the volume buttons and plug in the usb cable. The usb connection will supply the power. Try that while you have odin open on the pc, and see if it gets you into download mode.
it worked!!!!
where is the tar file?
i just didn't apply any file for 1.81. what does it do, by the way, with no file selected?
If you used the one-click downloader, the firmware and Odin are both contained in the exe file, so you don't have to add anything. If you pressed start, and Odin reported success, then you flashed the firmware.
Well, my phone cant enter in this modes, but the problem its that also cant enter to the system, i can only see the logo of samsung and then the screen turn off, I dont know what to do, because I cant use the odin because I cant enter in download mode, I dont know if there is a button to hard reset the phone. I was trying to put a rom of ics but i believe that the firmware was wrong for my phone. please help me.
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Sounds like you flashed something in Odin that was not for your phone. You probably need to get it J-tagged to get it fixed. Check out mobiletechvideos.com
It's like $50 dollars for the service, they'll J-tag your phone and flash the correct bootloader.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
How did you try to get into download and recovery. Be as specific as possible
JoseDavid said:
Thanks for your fast answer Mattix but you don't know another way to fix it, because I'm not in United States then its very dificult ( and take to much time ) to send my phone.
Click to expand...
Click to collapse
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
122ninjas said:
How did you try to get into download and recovery. Be as specific as possible
Click to expand...
Click to collapse
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
JoseDavid said:
Well, when I try to get into recovery I press the buttons of power and up and down of volume, and the same way to get into download but in this time with the phone connected in the pc. When I try to get into download mode, I can't see neither the samsung logo
Click to expand...
Click to collapse
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
creepyncrawly said:
Since the phone will turn on, and initiate the boot process, it should be able to recover it yourself. Jtag is for true hard bricks, which your phone is NOT.
Please give a full description of what led up to your problem. What firmware was on the phone before, what did you attempt to flash, and anything that you can think of that would provide any additional information for trouble shooting. Also, a link to the firmware you tried to flash.
Click to expand...
Click to collapse
I had a rom of supernexus for jelly bean, this rom run very fine, but i was trying to put the modem of one rom the ics, and in this moment the problems started, but i could enter in download mode and try to flash with a rom of ics, the topic its in spanish, and I couldn't read well because the rom its for s2, they don't specified the model sgh i777 :S, now I downloaded the rom what i need but i can enter in the download mode, I cant put the link because I'm new here
creepyncrawly said:
To get the SGH-I777 into download mode, continuously hold down both volume buttons (but not the power button) while plugging in the usb cable.
Can you answer my previous question?
Click to expand...
Click to collapse
I'm doing the try right now without pressing the power button and then my phone screen display "Forcerd Upload by key pressing"
that help??
JoseDavid said:
I cant put the link because I'm new here
Click to expand...
Click to collapse
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
creepyncrawly said:
I would like to see what you flashed, and if it contains the secondary bootloader for a different device. Just type in the link and I can cut and paste it.
Click to expand...
Click to collapse
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
JoseDavid said:
SamMobile.com_Android_4.0.1_CUSTOM.rar
this is the name of the rom I downloaded,maybe you can google it,
http://drblackberry.com.ve/?p=7343&replytocom= 880, this is the page
Click to expand...
Click to collapse
Looks like he loaded bootloaders.
122ninjas said:
Looks like he loaded bootloaders.
Click to expand...
Click to collapse
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
JoseDavid said:
Yes one step in the topic was put a bootloaders, right now I'm in Forced Upload by key pressing, I read in another site that it is something like download mode.
Click to expand...
Click to collapse
Nobody knows what can I do in that moment?
I put my i777 on download mode by removing the battery and putting it back. Hold the volume button down and connect the USB charger wait for the buttons to flash and disconnect the charger while holding the volume down button. If that doesn't work nothing will.
Sent from my SGH-I777 using Tapatalk 2
JoseDavid said:
Nobody knows what can I do in that moment?
Click to expand...
Click to collapse
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
creepyncrawly said:
Try this:
Pull the battery and leave it out.
Hold down volume button and plug in the USB cable. (PC will supply the power)
This should boot the phone into download mode.
If the above works to get into download mode, do the following:
Download the I777 secondary bootloader .tar from the Download Repository. See the link in my signature.
Unplug the phone (to shut off)
Open Odin v1.85 on screen of pc.
Enter download mode as above.
When connected put the secondary bootloader in the PDA slot in Odin and flash.
Click to expand...
Click to collapse
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
JoseDavid said:
Hey you all thanks for everything, I could fix the phone,
I could enter in the download mode and then install the secondary bootloader like creepyncrawly says to do,
Thanks :victory::silly:
Click to expand...
Click to collapse
Glad u got it fixed! In the future only download roms from this Site and never flash bootloaders.
Sent from Team Pirate Headquarters
help please
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
jck203 said:
I just recently got my SGS2 (i777) and decided to root it. Unfortunately I got the root from another site (dumb move) and today the phone went into a reboot loop. I can connect it and get it into download mode, but everytime I try to flash back to the stock rom, or anything else (bootloader) Odin says connection failed, unable to open COM Port. I know it connects because it installs the drivers for the phone. Can someone MUCH smarter that me assist with this one?
Click to expand...
Click to collapse
can you interrupt the bootloop by trying to get to recovery (holding VOL UP + VOL DOWN + POWER until recovery menu appears) and then go to backup-restore and restore a backup? That's what I would try. IF that does not work, I would reinstall the drivers for andoid on your pc --even though you had them working (presumably) once before. After reinstalling the drivers then odin should (may!) see the phone and work.
good luck
Please please please could anyone help!
About a month ago I upgraded to Ice cream sandwich (LP7) and then rooted my S2. All worked fine for 3 or 4 days and then suddenly it crashed for no reason. I suspect, but am not sure, that it did an automatic update. On rebooting it just stops at the Samsung S2 screen with a yellow triangle.
For the last few weeks i have been trying to find a fix, but am at my wits end now.
I have gone through the different solutions on your site but to no avail also where mine seems to be different is that I can get into boot mode and odin always says its successful. I have tried different pc and usb cable too just in case that was an issue
I can not get into Volume up mode, but i can get into boot mode with volume down. I have tried re loading a few different rom's and Odin says that the transfer was successful each time, however it is still stuck at the same place on reboot.
Tried reloading kernel and re partitioning, and again Odin said it went OK, but still stuck on start screen.
Tried using a jig and turned phone on, but it the phone just went to the start screen again.
If i could just get into reset mode, i could clear the memory, but this is not working either.
If anyone could help i would be very so grateful.
Thanks
Terry
mcguirestick said:
Please please please could anyone help!
About a month ago I upgraded to Ice cream sandwich (LP7) and then rooted my S2. All worked fine for 3 or 4 days and then suddenly it crashed for no reason. I suspect, but am not sure, that it did an automatic update. On rebooting it just stops at the Samsung S2 screen with a yellow triangle.
For the last few weeks i have been trying to find a fix, but am at my wits end now.
I have gone through the different solutions on your site but to no avail also where mine seems to be different is that I can get into boot mode and odin always says its successful. I have tried different pc and usb cable too just in case that was an issue
I can not get into Volume up mode, but i can get into boot mode with volume down. I have tried re loading a few different rom's and Odin says that the transfer was successful each time, however it is still stuck at the same place on reboot.
Tried reloading kernel and re partitioning, and again Odin said it went OK, but still stuck on start screen.
Tried using a jig and turned phone on, but it the phone just went to the start screen again.
If i could just get into reset mode, i could clear the memory, but this is not working either.
If anyone could help i would be very so grateful.
Thanks
Terry
Click to expand...
Click to collapse
You need to flash a ROM that will wipe your data at once.
Is your phone GT I9100 or GT I9100G?
Jokesy said:
You need to flash a ROM that will wipe your data at once.
Is your phone GT I9100 or GT I9100G?
Click to expand...
Click to collapse
It Is a GT-I9100
mcguirestick said:
It Is a GT-I9100
Click to expand...
Click to collapse
Follow these steps:
1. Download CM9 Resurrection editon
2. Flash CM9 Ressurection edtion via Odin
done.
Let me know how it goes.
Jokesy said:
Follow these steps:
1. Download CM9 Resurrection editon
2. Flash CM9 Ressurection edtion via Odin
done.
Let me know how it goes.
Click to expand...
Click to collapse
Didnt knew roms could be flashed through odin, are they also flashed through the PDA section?
Poroto said:
Didnt knew roms could be flashed through odin, are they also flashed through the PDA section?
Click to expand...
Click to collapse
That is a special .tar edition. You simply flash it just like a single file firmware (as PDA).
Good luck
Jokesy said:
That is a special .tar edition. You simply flash it just like a single file firmware (as PDA).
Good luck
Click to expand...
Click to collapse
Hi Tried it exactly the same im afraid Odin says successful phone reboots then sits at Samsung s2 screen and goes no further
mcguirestick said:
Hi Tried it exactly the same im afraid Odin says successful phone reboots then sits at Samsung s2 screen and goes no further
Click to expand...
Click to collapse
can you enter recovery now?
Jokesy said:
can you enter recovery now?
Click to expand...
Click to collapse
Hi, Nope still can only get to boot load not recovery
mcguirestick said:
Hi, Nope still can only get to boot load not recovery
Click to expand...
Click to collapse
I think your data partition is corrupt, but you can still get it solved.
You need to special .pit file. I'll post you the link (for the .pit file and instructions) very soon
Try this it worked for me
mcguirestick said:
Please please please could anyone help!
About a month ago I upgraded to Ice cream sandwich (LP7) and then rooted my S2. All worked fine for 3 or 4 days and then suddenly it crashed for no reason. I suspect, but am not sure, that it did an automatic update. On rebooting it just stops at the Samsung S2 screen with a yellow triangle.
For the last few weeks i have been trying to find a fix, but am at my wits end now.
I have gone through the different solutions on your site but to no avail also where mine seems to be different is that I can get into boot mode and odin always says its successful. I have tried different pc and usb cable too just in case that was an issue
I can not get into Volume up mode, but i can get into boot mode with volume down. I have tried re loading a few different rom's and Odin says that the transfer was successful each time, however it is still stuck at the same place on reboot.
Tried reloading kernel and re partitioning, and again Odin said it went OK, but still stuck on start screen.
Tried using a jig and turned phone on, but it the phone just went to the start screen again.
If i could just get into reset mode, i could clear the memory, but this is not working either.
If anyone could help i would be very so grateful.
Thanks
Terry
Click to expand...
Click to collapse
Try this
Try this step by step and it shoudl work!
Requirements
A Samsung Galaxy S2 GT-I9100
A Windows PC
Your phone’s USB cable
7-Zip, WinRAR, or any other programs that can extract archive files
Handset USB drivers installed on the PC. You may install the drivers by installing Samsung Kies.
Enable USB Debugging on your handset.
Disable antivirus, firewall, and other security software. Also disable Samsung Kies and other software that accesses your phone. Such software can interfere with the procedure in this guide.
Download the following files to your computer:
Android 4.0.4 ICS firmware build XXLQ5 (I9100XXLQ5_I9100OXALQ5_OXA.zip, 387.1 MB)
copy and paste
hotfile.com/dl/162208594/226b6f0/I9100XXLQ5_I9100OXALQ5_OXA.zip.html
Odin3 1.85 (Odin 1.85.zip,199 kB)
Make sure your phone’s battery is charged up to 75% or more to avoid interruptions during the process.
Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.
Instructions
Extract the contents of the I9100XXLQ5_I9100OXALQ5_OXA.zip file to get these files:
I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5
GT-I9100-MULTI-CSC-OXALQ5.tar.md5
MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5
u1_02_20120326_emmc_EXT4_8GB.pit
Extract the contents of the Odin 1.85.zip file to obtain the Odin3 v1.85.exe file.
Double-click on the Odin3 v1.85.exe file to launch Odin on your computer.
Unplug your phone from the computer if it is connected. After unplugging, turn your phone off.
Put your phone into Download Mode. To do this, hold the Volume Down, Home, and Power buttons together until the screen turns on. Press the Volume Up key to put your phone into Download Mode.
Connect your phone to the PC using the USB cable. In Odin, a message saying “Added!!†will appear on the bottom left of the window.
In the Odin window, click on the PDA button and select the I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5file. The file should show on the space beside the PDA button.
Click on the PHONE button and select MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5 file. The file should show on the space beside the Phone button.
Click on the CSC button and select the GT-I9100-MULTI-CSC-OXALQ5.tar.md5file. The file should show on the space beside the CSC button.
Don’t alter anything else in Odin. Leave everything else as is, except for adding the files mentioned in steps 7 to 9.
Click on the Start button in Odin to start flashing the firmware to your phone.
After the flashing completes, your phone will automatically reboot. You should be able to get a “PASS†message on the top left part of Odin.
NOTE: If you get a FAIL message or Odin gets stuck, disconnect your phone from the PC and close Odin. Remove the battery from your phone, re-insert it, and place your phone into Download Mode again. Open Odin and do the procedure starting from step 6.
Once you see the Samsung logo on your phone’s screen, you can safely disconnect your phone from the PC.
Hope this helps!
ScottsDesk
ScottsDesk said:
Try this
Try this step by step and it shoudl work!
Requirements
A Samsung Galaxy S2 GT-I9100
A Windows PC
Your phone’s USB cable
7-Zip, WinRAR, or any other programs that can extract archive files
Handset USB drivers installed on the PC. You may install the drivers by installing Samsung Kies.
Enable USB Debugging on your handset.
Disable antivirus, firewall, and other security software. Also disable Samsung Kies and other software that accesses your phone. Such software can interfere with the procedure in this guide.
Download the following files to your computer:
Android 4.0.4 ICS firmware build XXLQ5 (I9100XXLQ5_I9100OXALQ5_OXA.zip, 387.1 MB)
copy and paste
hotfile.com/dl/162208594/226b6f0/I9100XXLQ5_I9100OXALQ5_OXA.zip.html
Odin3 1.85 (Odin 1.85.zip,199 kB)
Make sure your phone’s battery is charged up to 75% or more to avoid interruptions during the process.
Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.
Instructions
Extract the contents of the I9100XXLQ5_I9100OXALQ5_OXA.zip file to get these files:
I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5
GT-I9100-MULTI-CSC-OXALQ5.tar.md5
MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5
u1_02_20120326_emmc_EXT4_8GB.pit
Extract the contents of the Odin 1.85.zip file to obtain the Odin3 v1.85.exe file.
Double-click on the Odin3 v1.85.exe file to launch Odin on your computer.
Unplug your phone from the computer if it is connected. After unplugging, turn your phone off.
Put your phone into Download Mode. To do this, hold the Volume Down, Home, and Power buttons together until the screen turns on. Press the Volume Up key to put your phone into Download Mode.
Connect your phone to the PC using the USB cable. In Odin, a message saying “Added!!†will appear on the bottom left of the window.
In the Odin window, click on the PDA button and select the I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5file. The file should show on the space beside the PDA button.
Click on the PHONE button and select MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5 file. The file should show on the space beside the Phone button.
Click on the CSC button and select the GT-I9100-MULTI-CSC-OXALQ5.tar.md5file. The file should show on the space beside the CSC button.
Don’t alter anything else in Odin. Leave everything else as is, except for adding the files mentioned in steps 7 to 9.
Click on the Start button in Odin to start flashing the firmware to your phone.
After the flashing completes, your phone will automatically reboot. You should be able to get a “PASS†message on the top left part of Odin.
NOTE: If you get a FAIL message or Odin gets stuck, disconnect your phone from the PC and close Odin. Remove the battery from your phone, re-insert it, and place your phone into Download Mode again. Open Odin and do the procedure starting from step 6.
Once you see the Samsung logo on your phone’s screen, you can safely disconnect your phone from the PC.
Hope this helps!
ScottsDesk
Click to expand...
Click to collapse
Hi Tried it again no luck
mcguirestick said:
Hi Tried it again no luck
Click to expand...
Click to collapse
Sorry for not posting the link for the .pit file.
You can get the pit file here
Use the stock pit file first before trying the patched ones.
Follow the guide in this thread to revive your phone
Good luck
Jokesy said:
Sorry for not posting the link for the .pit file.
You can get the pit file here
Use the stock pit file first before trying the patched ones.
Follow the guide in this thread to revive your phone
Good luck
Click to expand...
Click to collapse
Shall we try the pit by itself or the pit with the rom
//
I belive we have the same problems:
http://forum.xda-developers.com/showthread.php?p=32546472#post32546472 (now that my phone flashs - page 2 -)
marceloasr said:
Shall we try the pit by itself or the pit with the rom
//
I belive we have the same problems:
http://forum.xda-developers.com/showthread.php?p=32546472#post32546472 (now that my phone flashs - page 2 -)
Click to expand...
Click to collapse
his case is milder than yours. he should get his problem fixed by follow the tutorial i posted.
TRY THIS!
mcguirestick said:
Hi Tried it again no luck
Click to expand...
Click to collapse
Try this I did and it worked to get mine booting after a bad update.
I messed around with it using several methods of getting it to boot into download mode until I finally got it to do it. I think I left it plugged into the USB, powered it down until I saw the charging screen, then I proceeded to play with the different ways to hold the buttons to get it to download mode. If you are persistent enough and read a little on booting methods to get bricked phone into download mode you will succed if not then your not for the world of trial and error... the main thing is do the first steps I said before until it works
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
or try
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
any how try try try until it works
Once in download mode
Get your files together for your phone, and use Odin 1.85.
Plug into Odin and make sure it shows yellow and its added!
1. Now if your files have like 3 files and the exact .pit file for your phone if available.
I found mine here (Find yous stock firmware for your phone)
CLICK HERE
2. Click the PIT button and browse to your exact .pit file for your phone *It should now have added a check in the re-partition box under the options area of the Odin window. If not CHECK IT!
***If you don't have your .pit don't worry about this unless you suspect, or have a bad partition
3. If you have just 1 file just click the PDA button and load the file. If you have 3 then you will load the PDA file in PDA, the Modem file into PHONE, and the CSC file into CSC, there are way too many phones to link all the files so get you stuff together!
4. Now hit start.
5. When done and the phone shows the first sign of starting up IE Logo or whatever... immediately unplug the battery from the phone to shut it down.
6. Now put it back in and start it in Upload mode by pressing Vol Up, Home at the same time then the Power button.
7. As soon as the phone shows the first sign of starting up IE Logo or whatever let go of all buttons and using the Vol Up down Choose the Clear Cache option and go through and make sure you factory reset it if you can just for good measure.
8. Reboot
9. Now when the phone shows the first sign of starting up IE Logo or whatever take out battery again to power off
10. Now put it back in and start it in Download mode by pressing Vol Down, Home at the same time then the Power button.
11. Once in download mode Hook up to Odin again and flash it with a root kernel for your phone. Do not ask me just find it. I did it took time but I got all the files together over several days of reading and collecting the correct ones.
12. When done and the phone shows the first sign of starting up IE Logo or whatever... immediately unplug the battery from the phone to shut it down.
13. Now put it back in and start it in Upload mode by pressing Vol Up, Home at the same time then the Power button.
14. In most roots you will now have a advanced or mounting options and more options to use.
15. I cleared the Cache again, Cleared the Davilik Cache, Went into a option and actually mounted the cache formatted the Cache.
16. Use the option now to restart the phone...
And mine started up installed the apps and I am up and running, nice and smooth and no issues so far
I hope this helps out someone whos just about to go off the deep end, as I was there and patience and trial and error came up with this step by step way to recover mine. Thank me by hitting the little thumbs up THANKS button below this post.
And if your so happy your phone is up show your appreciation by buying me a Pepsi
Jokesy said:
his case is milder than yours. he should get his problem fixed by follow the tutorial i posted.
Click to expand...
Click to collapse
Hi Once again no luck,
I have sent it away to go on a JTAG box will let you know if that fixes it.
I really appreciate all your help.
I will let you know what happens.
thanks
Terry
mcguirestick said:
Hi Once again no luck,
I have sent it away to go on a JTAG box will let you know if that fixes it.
I really appreciate all your help.
I will let you know what happens.
thanks
Terry
Click to expand...
Click to collapse
Sorry for your luck! Cheers!
Hey guys, I really need help with my situation. I've been looking all over the forums for 2days straight trying to find solutions to my problem. I have a galaxy s2 i777 and I had the sho-stock3 rom. Then I decided that I wanted to back up my rom, so I used rom manager to do it. that's when the problem started. when the phone tried restarting it was stuck where it says "galaxy s2" with the yellow triangle. I put it into download mode and tried to flash siyah kernel..it worked..but when I tried to reboot my phones says "firmware upgrade encountered an issue, please select recovery mode in kies and try again. of course kies wont let the phone connect. and yes all the drives are installed for my phone. now i'm just stuck trying to flash stock firmwares for the phone and the stock rom but it always fails in odin. please help me!!!!!
Hours76 said:
Hey guys, I really need help with my situation. I've been looking all over the forums for 2days straight trying to find solutions to my problem. I have a galaxy s2 i777 and I had the sho-stock3 rom. Then I decided that I wanted to back up my rom, so I used rom manager to do it. that's when the problem started. when the phone tried restarting it was stuck where it says "galaxy s2" with the yellow triangle. I put it into download mode and tried to flash siyah kernel..it worked..but when I tried to reboot my phones says "firmware upgrade encountered an issue, please select recovery mode in kies and try again. of course kies wont let the phone connect. and yes all the drives are installed for my phone. now i'm just stuck trying to flash stock firmwares for the phone and the stock rom but it always fails in odin. please help me!!!!!
Click to expand...
Click to collapse
Don't use rom manager again
Sent from my SGH-I777 using Tapatalk 4 Beta
Can you get in either cwm recovery or download mode?
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
Can you get in either cwm recovery or download mode?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
yes i can get into download mode only by holding down on vol and plugging in the usb...no i cant get into cwm recovery
Try this page...
http://forum.xda-developers.com/showthread.php?t=1511906
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
Try this page...
http://forum.xda-developers.com/showthread.php?t=1511906
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
thank you, my phone is back again!!
Sweet enjoy your phone buddy!
Sent from my SGH-I777 using xda app-developers app
Hours76 said:
yes i can get into download mode only by holding down on vol and plugging in the usb...no i cant get into cwm recovery
Click to expand...
Click to collapse
this SAVED me...I couldn't get it into download mode for the life of me and that worked. I now have the correct i777 JB file (I accidentally flashed the wrong version). back in the game!
Help
sbello81 said:
this SAVED me...I couldn't get it into download mode for the life of me and that worked. I now have the correct i777 JB file (I accidentally flashed the wrong version). back in the game!
Click to expand...
Click to collapse
Hello
My friend just gave me I777 with this problem cause he bought a new phone, he couldn't tell me exactly when he got that "connect to kies". I never flashed anything or installed any rom's, I just want to get it back to life. Any solutions for me?
Fratula said:
Hello
My friend just gave me I777 with this problem cause he bought a new phone, he couldn't tell me exactly when he got that "connect to kies". I never flashed anything or installed any rom's, I just want to get it back to life. Any solutions for me?
Click to expand...
Click to collapse
Can you put the phone into download mode? I would assume the answer is yes if you still get the "connect to kies" message. Following are detailed instructions for getting into download mode.
Download Mode:
There are several ways to put the phone into download mode. You should try all of them that you can before you give up.
Recovery mode:
With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.
Download mode:
1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.
4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.
5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".
6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
If the phone will go into download mode, you will need to use Odin desktop to flash the stock firmware. You should use the latest stock firmware. Go to the Download Repository and download Odin3 v1.85 from the link near the top of the page, and also download the latest stock firmware, "I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean)" from near the bottom of the page. It's the next to last item. Download both to your Windows pc, and then follow the detailed instructions below to flash it onto your phone.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
The phone should boot up normally. If it does not, enter recovery (see instructions in the download mode section) and perform a wipe data/factory reset.
I decided to do a factory reset on my rooted SGH i777. When I did the factory reset, the phone was plugged into my computer. Now when I turn on the phone I see the Samsung Galaxy logo and then the screen goes black (no backlight) and the phone is completely unresponsive. Is there any hope to save my phone?
US variants have their own specific fora, your thread belongs here. I've asked mods to move it for you, sit tight until they do. Generally speaking (and this is the only advice I'm prepared to give you as I don't have your specific device, but the advice holds true for all Samsung phones), if you don't have download or recovery modes, you're probably boned.
I'm sure other people will suggest a few 'longshot' things you can try which might have a very very rough chance of working when your thread gets moved to the right place though.
I'd say there is a fairly good chance...
Can you boot into download mode? If so, then it's very likely. Just flash the stock firmware with Odin. You can download the necessary firmware file from the Download Repository. If you need any additional help, just ask.
creepyncrawly said:
I'd say there is a fairly good chance...
Can you boot into download mode? If so, then it's very likely. Just flash the stock firmware with Odin. You can download the necessary firmware file from the Download Repository. If you need any additional help, just ask.
Click to expand...
Click to collapse
I can't boot into recovery or download mode.
dave455 said:
I can't boot into recovery or download mode.
Click to expand...
Click to collapse
Are you using the right button combo? Power+both volume keys.
dave455 said:
I can't boot into recovery or download mode.
Click to expand...
Click to collapse
Generally, a hard bricked phone is one that exhibits no signs of life. If there are any signs of life, buttons light up, boot screen appears, screen flickers, etc, then it is not hard bricked, and is probably recoverable. But first, you need to get it into download mode.
If the phone is hard bricked, you can get it back with jtag repair from a reputable shop such as Mobile Tech Videos.
There are several ways to put the phone into download mode. You should try all of them that you can before you give up.
Recovery mode:
With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.
Download mode:
1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.
4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.
5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".
6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
Thanks for that fantastic explanation!
This worked for me:
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
Now, how do I fix my phone with download mode?
Do I need to put a factory firmware image back onto the phone? It currently has rooted firmware that was working perfectly fine until I did a factory reset.
I would suggest that you flash the latest stock firmware, I777UCMD8 (Android 4.1.2 Jelly Bean) which you can download from the Download Repository. After flashing that you can root using the Framaroot application using the Aragorn exploit.
If you want custom firmware, once rooted you can install either Mobile Odin lite or Mobile Odin Pro and flash a custom kernel which has ClockworkMod Recovery. Following that, you can flash any firmware of your choice.
To get you started, and in case you need them, here are the directions for using Odin to flash the stock firmware (copy and paste):
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85 (recommended). It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) Once the flash is complete, the phone will reboot into system.
Thanks!
With your help, I was able to recover my phone. Thank you! I will be using stock firmware. Last time I had my phone rooted, it was so slow it was unusable.