Related
Hello, just to preface this- im not very technical, but i can follow instructions well.
Anyway, You guys were great to help me two months ago in rooting my phone. I ended up doing it through Odin and all went great. Got all the **** off my phone which was the main aim. I didn't put any custom roms on there as im a bit useless when it comes to this stuff and i felt i'd be pushing my luck after the rooting went so well.
Yesterday i used Kies and it asked me to upgrade the firmware as there was a new version available.
1. What should i do? Will upgrading through Kies reverse the rooting procedure or break my phone?
2. Should i get the newer update from this site? If so- is there any tutorial for updating the firmware after already rooting the phone through odin (chainfires method i think it was?
Thank you in advance for any advice all.
My phone details are ;
ANdroid 2.3.3
Baseband version I9100XXKE7
Kernel version; 2.6.35.7-I9100XWKF3-CL276555
[email protected] #2
Build number; GINGERBREAD.XWKF3
I have used kies to update firm ware after rooting and it did not UN root my phone so you should be fine. It did however install more useless apps that I had to remove.
Sent from my GT-I9100 using XDA App
thanks nuts nut
fracked said:
Hello, just to preface this- im not very technical, but i can follow instructions well.
Yesterday i used Kies and it asked me to upgrade the firmware as there was a new version available.
i would update via kies then go to chainfires post and pick root and cwm to match your new firmwares kernel .
That way you wont have to learn how to flash stock firmwares etc .,
jje
Click to expand...
Click to collapse
hi jje, thanks for the reply mate.
Can i ask- do you mean that after updating through kies, i need to download something else? I already have the phone rooted and have cwm on the phone?
sorry, a bit comfused here so i am
fracked said:
Can i ask- do you mean that after updating through kies, i need to download something else? I already have the phone rooted and have cwm on the phone?
Click to expand...
Click to collapse
What JJ said is to flash via Kies and then flash the CF-Root kernel from Chainfire to get root and CWM in the phone.
Hi Azeurius,
the thing is that i already have root and cwm on the phone. Ive already rooted.
So im at the point where i can upgrade the firmware through kies, but im looking for advice what i should do overall- nearing in mind the fact ive already rooted, and phone details are in Openingpost.
THanks!
Ok well I am also new here but from everything I have read my understanding is that you have rooted your device and loaded the original Kernel for your current firmware. If you upgrade through Kies then you will obviously have an upgraded firmware with the old kernel (from your 1st rooting).
So when you upgrade your firmware you just have to also upgrade your Kernel through odin so your phone will still be properly rooted.
I stand to be corrected. I only started reading about rooting today as I just got my Galaxy s2 having come from a Blackberry so new to Android but loving it!!! Best os ever!
I think I will root my phone but not going to touch the firmware as ICS should be release on Kies soon cant wait
ryanmak1 said:
Ok well I am also new here but from everything I have read my understanding is that you have rooted your device and loaded the original Kernel for your current firmware. If you upgrade through Kies then you will obviously have an upgraded firmware with the old kernel (from your 1st rooting).
Any stock upgrade removes root .
So when you upgrade your firmware you just have to also upgrade your Kernel through odin so your phone will still be properly rooted.
Correct
One big problem with Kies is that if you change firmware its possible that you lose the Kies upgrade path as phone codes no longer match .
jje
Click to expand...
Click to collapse
Hello
JJEgan said:
ryanmak1 said:
Ok well I am also new here but from everything I have read my understanding is that you have rooted your device and loaded the original Kernel for your current firmware. If you upgrade through Kies then you will obviously have an upgraded firmware with the old kernel (from your 1st rooting).
Any stock upgrade removes root .
So when you upgrade your firmware you just have to also upgrade your Kernel through odin so your phone will still be properly rooted.
Correct
One big problem with Kies is that if you change firmware its possible that you lose the Kies upgrade path as phone codes no longer match .
jje
Click to expand...
Click to collapse
Hello guys. Im relatively new to XDA. So I might sound stupid. My question is, as jje mentioned above "One big problem with Kies is that if you change firmware its possible that you lose the Kies upgrade path as phone codes no longer match" am i correct in saying that if I update my Galaxy s II (rooted + cwm recovery no custom rom) via kies, then I could run into problems? Also one more question. If I do update via kies, will it remove root and cwm recovery?? Thanks guys. .
Click to expand...
Click to collapse
Use Odin
I think KIES forbides to upgrade on rooted firmware. Even if it allows you i think you will use your root. I suggest you if you want the latest stock rooted firmware use Odin find the stock rooted XWLSD(Nordic countries) and flash via Odin (Don't use XWLS8 it has bugs), XWLSD is super stable or XXMS1(Poland) or XWLSE(Russia) if you are not from this countries then use XWLSD. If you want custom rom with no mods and no bloatwares use Neat rom or Wanam lite rom, if you want custom rom with mods and no bloatwares use disaster, biftor, omega, alliance rom and etc.
Yeah. I dont mind losing root access. As log as I can get official ota. Btw has the exynos bug been addressed?
Sent from my GT-I9300T using xda premium
Angelkom said:
I think KIES forbides to upgrade on rooted firmware. Even if it allows you i think you will use your root. I suggest you if you want the latest stock rooted firmware use Odin find the stock rooted XWLSD(Nordic countries) and flash via Odin (Don't use XWLS8 it has bugs), XWLSD is super stable or XXMS1(Poland) or XWLSE(Russia) if you are not from this countries then use XWLSD. If you want custom rom with no mods and no bloatwares use Neat rom or Wanam lite rom, if you want custom rom with mods and no bloatwares use disaster, biftor, omega, alliance rom and etc.
Click to expand...
Click to collapse
It allowed updating firmware on my rooted S5, but I did lose root when it was all done.
jdmarko said:
It allowed updating firmware on my rooted S5, but I did lose root when it was all done.
Click to expand...
Click to collapse
Thanks. I will be try updating my rooted i9500 and P600 via Kies. I am not sure if there is already an update for my region available for the S4 but I was prompted to update my P600 only to get a notification telling me that my device has been modified. This was for OTA updating. I really hope it works because I am really not looking forward to un-rooting these devices just for the updates since downloading the stock ROM takes forever. Will post results after trying just in case anyone is interested.
I have a Samsung I9300, I'm in the US, and and on T-Mobile, it has the stock ROM, but rooted with Chainfire's CF-Root 6.4. The S3 has downloaded the OTA Jellybean update, and I have postponed it for now. My question is, can I apply the update ? and then just re-root with CF-Root, or will the update fail?
Thanks
I wouldn't apply the ota as it can fail with any root applied incl cf root. You could update through kies and reapply cf root or flash the official firmware for your phone through Odin. If ya need a hand finding out which official firmware ya need do the following:-
Dial *#1234# into your keypad and post results.
Sent from my GT-I9300 using xda premium
It shows:
AP: I9300UBBLG2
CP: I9300UBLG2
CSC: I9300UUBBLG2
I believe that firmware is Brazilian but using sammobile.com to check for brazilian versions I dont see a JB update for any of the brazilian carriers handsets or the unbranded version :/
If u have kies you could do the update through it, it updates the same as if u flash through odin and wont wipe anything. You could also use "checkfus" from playstore it should identify your phone and firmware version and allow u too download.
I had a similar problem, and I thought I could try to get Jelly Bean by flashing a custom Jelly Bean ROM. Now I want to go back to stock ROM (flashed custom ROM's performance is awful), so I downloaded the corresponding stock ROM from sammobile, but what I found was a very large (1,2Gb) tar.md5 file and a SS_Dl.dll file.
So the question; is it normal for it to be that big? and, how do I flash it with odin... which thing goes where? which pit should I use? do I put the 1,2Gb file in PDA? should I tick re-partition? bootloader?? Please, help
(Current ROM is DarkyROM III v6.0, and my android phone is a spanish yoigo i9300, so according to sammobile my stock is I9300XXBLFB_I9300YOGBLF1_YOG)
Myscha said:
I had a similar problem, and I thought I would try a Custom jellyBean ROM. Now I want to go back to stock ROM, so I downloaded the corresponding stock ROM from sammobile, but what I found was a very large (1,2Gb) tar.md5 file.
So the question; is it normal for it to be that big? and, how do I flash it with odin... which thing goes where? which pit should I use? do I put the 1,2Gb file in PDA? should I tick re-partition? bootloader?? Please, help
(Current ROM is DarkyROM III v6.0, and my android phone is a spanish yoigo i9300, so according to sammobile my stock is I9300XXBLFB_I9300YOGBLF1_YOG)
Click to expand...
Click to collapse
Go here - This is a guide for using Odin etc -
http://forum.xda-developers.com/showthread.php?t=1671969
badassballer said:
Go here - This is a guide for using Odin etc -
http://forum.xda-developers.com/showthread.php?t=1671969
Click to expand...
Click to collapse
Much appreciated, I'll try not to break anything
Myscha said:
Much appreciated, I'll try not to break anything
Click to expand...
Click to collapse
No problem! Enjoy!
OK, a slight variation on the question:
S3 I9300 on T-mobile, stock ROM, rooted w/ CF 6.4. Can I use Mobile Odin Pro to flash the JB update that the phone has downloaded (update.zip sitting in /cache) checking everoot to keep root, and do the update this way, rather than using kies to update and the re-root?
And if so, what happens to the CWM recovery that is installed, does it get over written with stock recovery?
Thanks
Hi im a noob. i got my s3 in the past 2 days, i have a problem about my battery.. it last 24 hours or less. im on stock.. how to update or root this phone? anyone could help me.
Android version: 4.0.4
Baseband version: I9300DXLH1
Kernel version 3.0.15-928452
THANKS
iamjavin said:
Hi im a noob... how to update or root this phone? anyone could help me.
Click to expand...
Click to collapse
Hi nOObie, I used to be a [email protected]@b like you but there are a lot of tutorials how to root an s3. Especialy you can search it on Youtube. I followed this tutorial video http://www.youtube.com/watch?v=kbzMHVdV_Vc and got my s3 rooted. You do the same as well.
Cheers
I'm using i9003dxlh1 (rooted) .. Wanted to upgrade to jellybean.. But.... Using software update (in the phone settings) and finish downloaded.. And install.... BUT nothing happens.... But... My message font becoming bigger.... Version of the firmware is still 4.0.4... Pls help
Sent from my GT-I9300 using xda premium
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
daxgirl said:
That's all you need mate. This kernel is declared safe by Chainfire but as any 4.0.4 kernel should not be used to wipe data because of possibility of emmc cap bug rendering your phone bricked. Root with this kernel but make sure to switch to custom safe one before attempting to wipe data.
Best of luck
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
wargrafix said:
Which one would you recommend for wiping data? i assume by wiping data you mean unrooting. am I right?
Click to expand...
Click to collapse
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
slimlo said:
check here you'll find your answers http://forum.xda-developers.com/showthread.php?t=1756242
Click to expand...
Click to collapse
Essentially flashing using a 4.04 firmware will brick the phone? or is it when I flash, it will be bad to flash using a 4.04 firmware? Sooo confused.
If anyone has the steps what I should do, please tell me. I am worried about bricking.
If I root the phone, when official JB comes out, will I be able to update?
any help guys? The thread isn't very clear what do I do if I have this kernal. Do I downgrade before rooting?
Insted of flashing that Cf root kernel with Odin or Cwm, flash Siyah 4.1.5.
www.gokhanmoral.com
Sent from my GT-I9100
The link, do I root with those? if I do, what will it change?
wargrafix said:
Hi guys. I have been a frequent visitor and learned alot about android and features. I am ready to root my galaxy s2 i9100
My details are :
Android version: 4.04
Model number gt-i9100
Baseband version: i9100XXLQ6
Kernal version: I9100xxlbq-cl911584
build number: IMM76D.XXLQB
I downloaded
ODIN 1.85
CF-Root-SGS2_XX_XEO_LQB-v5.6-CWM5
I am not seeing the original kernal file up for download for my version. What else do I need for my root? Is there any advice such as best method and such. Thank you kindly everyone. Mods, if I posted in the wrong section, please move my thread to the correct location.
Click to expand...
Click to collapse
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
ZDQ said:
I actually have the same HW version in my new SGS2 and I have checked with eMMC check (downloaded from Google Play) that my chip is safe from "brick bug" :laugh:
Now the question is: which kernel to choose, CF or Siyah ? I'm planning to use CyanogenMod 10 on this phone, does kernel version matter at all in this case ?
/edit:
ROM will be either original CM10 or one of the variants (like HellyBean for example)
Click to expand...
Click to collapse
If GotBrickbug app by CF said your chip is safe than it shouldn't matter what kernel you use. Safe hardware.
Personally I always prefer rooting with CF kernels that match my FW version. Then if you're still unsure about the chip... flash siyah, go to advanced (while still in recovery) > reboot recovery. Then wipe data with siyah kernel just to be on the safe side. I always keep siyah 3.5.2 (the first transisiontl ics/jb kernel) for those purposes. CM10 built in kernels are all considered safe so that's the last time you'll ever be worried about it.
Best of luck, man
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
wargrafix said:
Thank you very much, I ran emmc check and I have a sane chip.
if I flash with the CF LBQ, what is my next step?
Click to expand...
Click to collapse
your phone will be rooted and u can then choose to install a custom kernel like Siyah v 4.1.5 on ur phone which gives u the latest CWM recovery thro which u can install any custom rom of ur choice(meant for i9100 though) on ur phone
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
wargrafix said:
Thank you very much!
If my questions seemed noobish, its because I want to be very sure. It my first expensive phone.
a question though, When samsung upgrades us to JB, will I be able to update it?
Click to expand...
Click to collapse
Samsung releases firmware in various regions and with varied carriers. So I bet that till it is officially released it will take time but when it does you will get OTA if your are on 'STOCK' ROM. but if you move away to custom rom then you will have to update manually.
Sent from my GT I-9100 with CM10 JellyBean L.O.V.E. via Tapatalk 2
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
wargrafix said:
So essentially I need to revert to 4.04 stock to upgrade? How do I do that?
Click to expand...
Click to collapse
To revert back assuming you didn't do backup before, download 4.0.4 firmware for your region on sammobile and flash it using odin.. Then to upgrade it when official update are up just hit OTA, kies, or flash it via odin the same way like you flash 4.0.4..
If you don't have idea how to flash then google it, theres plenty much tutorials out there.. hope it helps
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
wargrafix said:
Ohhhhhh. I get it. Flash using CF, or CM 10, use triangle app to remove warning triangle and if I need to unroot, flash with 4.04 (my region) using odin? Sound pretty simple. Am I missing any steps?
Click to expand...
Click to collapse
Actually I get confused myself hehe, by "Flash using CF, or CM 10" you mean flash what? The rest are ok..
Well, let's put this simple, Flash the CF-Root for your phone then you're rooted now, if you want to flash custom rom such as cm10 then flash it (the cm10 zip file to be flashed on recovery mode and don't forget to read the cm10 instruction before & after flashing), if you want to get rid of the triangle then do it with triangle away, finally to unroot and revert to stock, just flash stock firmware via odin..
Hi everyone! I just rooted my phone and it was sooo easy.
Thank you so much. Your advice and help definitely made it much easier than I though.
Yeah, welcome to the rooted world where you can explore more with your phone
Sent from my GT-I9100
can any one send me 4.2.2 firmware link?
i have 4.0.4 rom and i want to update it to 4.2.2 and before that i want to upgrade my firmware.
thanks in advance
Imanuelt said:
can any one send me 4.2.2 firmware link?
i have 4.0.4 rom and i want to update it to 4.2.2 and before that i want to upgrade my firmware.
thanks in advance
Click to expand...
Click to collapse
Mate....you REALLY need to do some searching and reading before you touch your phone.
You ask for 4.2.2 firmware.....it doesn't exist....4.1.2 firmware is the newest.
You can get newer versions of android in custom ROMs.....but....
SEARCH READ UNDERSTAND LEARN......THEN AND ONLY THEN...DO......
some search suggestions.....
emmc brickbug
Odin flashing
kernel
Rooting
Firmware
custom ROM
Knowledge will help to prevent you from turning your S2 into an expensive paperweight. It's no good providing links unless you know/understand what you're doing......
Sent from my Chameleon powered S2 via XDA Developers App
Hello guys actully i would like to ask that i have galaxy s3 i9300 recently i update it with 4.3 jb rom but in this rom loads of bugs some time when i turn off screen then bck it on its takes ,2 ,3 secounds to onn nowi want downgrade it to 4.1.2 jb stock rom i hve read on sites mostly had downgrade it they all mentioned that after downgrade it say no registerd on network please help me out what should i do i want go bck old 4.1.2 rom cos i recently month ago bought s3 brand new dont wana brick it myself thnx ?
Rash732 said:
Hello guys actully i would like to ask that i have galaxy s3 i9300 recently i update it with 4.3 jb rom but in this rom loads of bugs some time when i turn off screen then bck it on its takes ,2 ,3 secounds to onn nowi want downgrade it to 4.1.2 jb stock rom i hve read on sites mostly had downgrade it they all mentioned that after downgrade it say no registerd on network please help me out what should i do i want go bck old 4.1.2 rom cos i recently month ago bought s3 brand new dont wana brick it myself thnx ?
Click to expand...
Click to collapse
Wrong Section!!
But you can downgrade to XXEMG4.
Rash732 said:
Hello guys actully i would like to ask that i have galaxy s3 i9300 recently i update it with 4.3 jb rom but in this rom loads of bugs some time when i turn off screen then bck it on its takes ,2 ,3 secounds to onn nowi want downgrade it to 4.1.2 jb stock rom i hve read on sites mostly had downgrade it they all mentioned that after downgrade it say no registerd on network please help me out what should i do i want go bck old 4.1.2 rom cos i recently month ago bought s3 brand new dont wana brick it myself thnx ?
Click to expand...
Click to collapse
One you are posting in the wrong forum.
Two you need to read the 4.3 threads and read the faqs and guided before asking repetitive questions .
help me out
HtcDesire2 said:
Wrong Section!!
But you can downgrade to XXEMG4.
Click to expand...
Click to collapse
plz help me how can i do acttualy i dont realy knw where should i send my question worried about my s3 ?
Rash732 said:
plz help me how can i do acttualy i dont realy knw where should i send my question worried about my s3 ?
Click to expand...
Click to collapse
Download XXEMG4 firmware from sammobile and flash it using ODIN (Same way you did for 4.3)
Did you do a nandroid bk up? Restore that? When you flashed 4.3 it's changes efs. So to fix network simply flash mg4 or newer modem. I use mj3 modem that comes with 4.3 mg9 firmware.
Please refer and use help threads which have already been made on these topics.
Moved to Q&A.
h
andrewwright said:
Did you do a nandroid bk up? Restore that? When you flashed 4.3 it's changes efs. So to fix network simply flash mg4 or newer modem. I use mj3 modem that comes with 4.3 mg9 firmware.
Click to expand...
Click to collapse
i just simply went settings about phone in software update and took update from thr then install i dont flash it via odin ?
hlp
a.cid said:
Please refer and use help threads which have already been made on these topics.
Moved to Q&A.
Click to expand...
Click to collapse
where from i can download that modem file and how to install it ?
No actually I took the updates from about phone software updates I don't use odin etc so I don't back up etc
Now what should I do for downgrade ?????
Sent from my GT-I9300 using xda app-developers app