Related
I had a rooted stock Verizon samsung galaxy note 2 with a couple tweaks, I wanted to set up a custom recovery so I installed clockwork from the google market, Im now getting System software not authorized by verizon wireless found on phone error messae with the yellow triangle. How can I restore my phone Anyone with an irc or skype able to help a guy out. I would really appreciate it.
damage145 said:
I had a rooted stock Verizon samsung galaxy note 2 with a couple tweaks, I wanted to set up a custom recovery so I installed clockwork from the google market, Im now getting System software not authorized by verizon wireless found on phone error messae with the yellow triangle. How can I restore my phone Anyone with an irc or skype able to help a guy out. I would really appreciate it.
Click to expand...
Click to collapse
Speaking from personal experience on two separate accounts of having to deal with the unauthorized software. If you wait for about a minute or so, the phone will shut off or you can pull the battery. Hold the volume down and home buttons together. While pressing and holding those two buttons together, press and hold the power button until the phone turns on and when you see the Samsung Galaxy Note II logo, release the power key. At this point, your phone should enter into downloading mode.
Use ODIN3 v3.07 to flash both of these files together. Also make sure that the Auto Reboot option is checked.
You'll need to download and open this file http://d-h.st/mKu in the PIT section of ODIN.
You'll also need to download and open this file http://d-h.st/Qd4 in the PDA section of ODIN.
Within seconds of flashing the two files at the same time, your phone will reboot and start up like normal.
damage145 said:
I had a rooted stock Verizon samsung galaxy note 2 with a couple tweaks, I wanted to set up a custom recovery so I installed clockwork from the google market, Im now getting System software not authorized by verizon wireless found on phone error messae with the yellow triangle. How can I restore my phone Anyone with an irc or skype able to help a guy out. I would really appreciate it.
Click to expand...
Click to collapse
Also, in order to flash a custom recovery, make sure you are both rooted AND unlocked. There is a very easy to follow guide in the development section by Adam Outler, who developed a pretty much automated system to do so.
http://forum.xda-developers.com/showthread.php?t=2118348
Good luck, hope the advice above gets you up and running again
Sent from my Note II
larry_thagr81 said:
Speaking from personal experience on two separate accounts of having to deal with the unauthorized software. If you wait for about a minute or so, the phone will shut off or you can pull the battery. Hold the volume down and home buttons together. While pressing and holding those two buttons together, press and hold the power button until the phone turns on and when you see the Samsung Galaxy Note II logo, release the power key. At this point, your phone should enter into downloading mode.
Use ODIN3 v3.07 to flash both of these files together. Also make sure that the Auto Reboot option is checked.
You'll need to download and open this file http://d-h.st/mKu in the PIT section of ODIN.
You'll also need to download and open this file http://d-h.st/Qd4 in the PDA section of ODIN.
Within seconds of flashing the two files at the same time, your phone will reboot and start up like normal.
Click to expand...
Click to collapse
will try this right now Thank you so much for timely response
Worked like a charm Thank you so much, Im going to try and get the bootloader unlocked so I can use the custom recovery for nandroid backups. Just not entirely sure what part of the guide I would be at. I am using stock with a couple tweaks, Mainly adaway, multiwindow, google wallet. Im rooted havent touched the boot loader yet Rooted the hard way before the one click apk exploit. Any Ideas?
larry_thagr81 said:
Speaking from personal experience on two separate accounts of having to deal with the unauthorized software. If you wait for about a minute or so, the phone will shut off or you can pull the battery. Hold the volume down and home buttons together. While pressing and holding those two buttons together, press and hold the power button until the phone turns on and when you see the Samsung Galaxy Note II logo, release the power key. At this point, your phone should enter into downloading mode.
Use ODIN3 v3.07 to flash both of these files together. Also make sure that the Auto Reboot option is checked.
You'll need to download and open this file http://d-h.st/mKu in the PIT section of ODIN.
You'll also need to download and open this file http://d-h.st/Qd4 in the PDA section of ODIN.
Within seconds of flashing the two files at the same time, your phone will reboot and start up like normal.
Click to expand...
Click to collapse
Hey buddy, glad you were able to help him out. Wanted to give you a little advice. It's usually considered bad form to just link the download. Most devs prefer you to link their thread, you know so the person can click Thanks or donate if they feel inclined to. I'm not sure if that's how Adam is, but wanted to point it out to you.
Sent from my SCH-I605 using Tapatalk 2
---------- Post added at 01:37 AM ---------- Previous post was at 01:34 AM ----------
damage145 said:
Worked like a charm Thank you so much, Im going to try and get the bootloader unlocked so I can use the custom recovery for nandroid backups. Just not entirely sure what part of the guide I would be at. I am using stock with a couple tweaks, Mainly adaway, multiwindow, google wallet. Im rooted havent touched the boot loader yet Rooted the hard way before the one click apk exploit. Any Ideas?
Click to expand...
Click to collapse
Best bet is to just start at step one of the unlock process
Sent from my SCH-I605 using Tapatalk 2
kintwofan said:
Hey buddy, glad you were able to help him out. Wanted to give you a little advice. It's usually considered bad form to just link the download. Most devs prefer you to link their thread, you know so the person can click Thanks or donate if they feel inclined to. I'm not sure if that's how Adam is, but wanted to point it out to you.
Sent from my SCH-I605 using Tapatalk 2
---------- Post added at 01:37 AM ---------- Previous post was at 01:34 AM ----------
Best bet is to just start at step one of the unlock process
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Good point, I honestly didn't think much of it. However, out of respect for these awesome developers I will only provide links from this point on to their threads.
Great thread title by the way....
nunyazz said:
Great thread title by the way....
Click to expand...
Click to collapse
I was actually to get what he needed by the title. First was clearly a noob by thegreat details. Second the "!!!" Told me he bricked his phone.
Sent from my SCH-I605 using Tapatalk 2
larry_thagr81 said:
Good point, I honestly didn't think much of it. However, out of respect for these awesome developers I will only provide links from this point on to their threads.
Click to expand...
Click to collapse
OK, followed Adam's instructions. I'm sure phone is rooted and unlocked.
Now, holding down 'Volum - and Home, then holding down Start' does not work.
I've tried it over and over again.
Any help appreciated.
SOLVED
N7105XXUEMK5 ROOT Tutorial – Galaxy Note 2 LTE GT-N7105 JELLY BEAN 4.3 FIRMWARE
Step by step instructions -
Download CF-Root package on your computer and extract the file.
http://download.chainfire.eu/255/CF...tn7105.zipRoot/CF-Auto-Root-t0lte-gtn7105.zip
Download Latest ODIN Software
Switch off your phone and enter into download mode.
To enter into download mode you need to press Volume down button and Home button simultaneously while turning the phone on.
Hope you have your device’s USB drivers installed on your computer if not install it.
Now open ODIN on your computer and connect your device to computer while your phone is on download mode.
When your device will be connected to your computer, one ID:COM boxes will turn yellow after some time.
Select the files that you have to flash or install on your device from the extracted files in first download.
Now in ODIN, check for Auto Reboot and F. Reset Time options.and for the Re-partition option, check only if you have selected .PIT file above.
Click start in ODIN and the flashing will begin.
This flashing might take some time.As soon as the installation ends your device will restart.
Unplug your device from computer.
Switch it off again after it turns on completely and boots to home screen.
Now you need to enter into recovery mode,to enter into recovery switch on the phone while pressing Volume up,Home and Power buttons together.
Navigate with volume buttons to and select wipe data/factory reset from the recovery menu.
Select reboot system now and wait for device to boot again.
You are done, you rooted your Samsung Galaxy Note 2 LTE GT-N7105 to 4.3 Jelly Bean N7105XXUEMK5 Firmware.
Click to expand...
Click to collapse
Method actually supplied by Chainfire.
https://twitter.com/ChainfireXDA
doesnt remove just puts it to the "uninstalled state". so u can choose to install it, from APP menu. KNOX.. then click install.
Don't seem worthwhile to flash. It doesn't have most of the note3/s4 functions
Sent from my GT-N7105 using Tapatalk 4
if your refering to "air command / snote3 etc" . those are n3 exclusive features. the skynote rom has them ported as addons but its touch and go atm some succeeded ( i myself got everything working, except a few syncing issues)
there will be ports though. no doubt
this wont work because of KNOX anyway. stupid feature.
I think knox can be gotten rid of using titanium backup
No need to post this in the dev section
If you didnt make it dont post it
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
can u please move it to general. sorry
UPDATE.
it does work. i just had to update SuperSU i got a few knox errors but it seems to be rooted. now some apps like readers hub etc. wont load (rooting detected)
addition to the tutorial above:
after you started your device again do the following:
1) update supersu through playstore
2) open supersu and update binary > reboot
and if you don't get popups to ask you for permission as soon as you use an app that needs root, open supersu and in settings set the default behavior from "ask" to "always allow".
this gets rid of the fc's and you can enjoy apps with root permission.
All i did was update SuperSU. it said binaries needed updating. i dont have twrp on this so i just selected normal. it rebooted to stock recovery , did nothing i could see. rebooted. updated gplay again. opened superSU didnt give FC. loaded greenify. WIN
all my apps ask "GRANT" permission.
wanam exposed works. got popup for KNOX again. just used it to bypass popup. still have root
4way reboot sticks
R0B3RTF1SH3R said:
All i did was update SuperSU. it said binaries needed updating. i dont have twrp on this so i just selected normal. it rebooted to stock recovery , did nothing i could see. rebooted. updated gplay again. opened superSU didnt give FC. loaded greenify. WIN
Click to expand...
Click to collapse
also used normal on my device, but it didn't reboot to recovery for me, it simply installed and told me that i needed to reboot.
i do however fail to get popup's asking me for permission.
yeah. i think everytime a new app asks it might trigger. but i have wanam exposed removing them. so all looks great. can customize away now. thats all i wanted. THANKS!
There is a nice rom for the 7100 ditto that could be updated for the 7105. It can be found in the 7100 development section. I think with some encouragement the development team would bring it to the 7105
Sent from my GT-N7105 using xda app-developers app
Yeah, 7105 isn't officially supported in neither Skynote nor Ditto. So i can't really get the N3 features on my phone without risking problems anyway. Thus going with the official 4.3 may be the best thing for the LTE people to do, which is why i'm now waiting for someone to release a stock rom modded to take away the knox bootloader. I still haven't decided what to do. There are some really good roms for 7105 in terms of performance and battery life, but those aren't the reasons for why i bought this phone. It feels like there are no good roms for the 7105 that don't also break the many unique features, like the advanced pen functions and the excellent stock camera app's steady-shot and slow-motion functionality. Those are more important to me than performance and battery life.
R0B3RTF1SH3R said:
All i did was update SuperSU. it said binaries needed updating. i dont have twrp on this so i just selected normal. it rebooted to stock recovery , did nothing i could see. rebooted. updated gplay again. opened superSU didnt give FC. loaded greenify. WIN
all my apps ask "GRANT" permission.
wanam exposed works. got popup for KNOX again. just used it to bypass popup. still have root
4way reboot sticks
Click to expand...
Click to collapse
May i know, with the step in post 1, do we have a stock recovery or CWM recovery?
saints5354 said:
May i know, with the step in post 1, do we have a stock recovery or CWM recovery?
Click to expand...
Click to collapse
i only have stock installed. sorry for delay. sleeping.
but when i updated superSU. i selected NORMAL recovery. then it said it would reboot. took about 10 seconds or more then rebooted into normal recovery. I didnt see it update or install anything automated so was like ?????? rebooted. then got messages from KNOX. then after updating my gapps APPS like. "google services" or the one that updates the gplay app. anyway. then it all seemed to work. noticed greenify asked for permission for root. i granted and it didnt get denied by knox. got a warning when trying to load "wanam exposed". then used wanam to get rid of warnings and stuff. even though i still have root.
after wipe/factory settings when I try to open SuperSU for update its blocked straight away with KNOX, any idea?
makes it 0x1
R0B3RTF1SH3R said:
makes it 0x1
Click to expand...
Click to collapse
Yeah... It does lol. But I cant open SuperSU now as its blocked straight away with KNOX, How can I open it to update and change settings for ALLOW?
Every couple of minutes I get message from knox that SuperSU has stopped.....
I am also facing the same problem... looks like the tutorial don't work...
Sent from my GT-N7105 using Tapatalk
kohmax said:
I am also facing the same problem... looks like the tutorial don't work...
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
Well it must work somehow because other guys confirms that it actually works
Sent from my GT-N7105 using XDA Premium 4 mobile app
My supersu fc-ed followed by the warning attached
Sent from my GT-N7105 using Tapatalk
As the title says guys,
I was about to root my Sprint Note III, but I received the update and now the Note III is running Android 4.4.4.
I don't want to do something and the get stuck with it.
Has it been done since the update?
Chainfire autoroot still works
ssuraj83 said:
As the title says guys,
I was about to root my Sprint Note III, but I received the update and now the Note III is running Android 4.4.4.
I don't want to do something and the get stuck with it.
Has it been done since the update?
Click to expand...
Click to collapse
You can always just use odin to install twrp than use twrp to install supersu
Thank for the reply guys.
I read also this still trips Knox.
ssuraj83 said:
Thank for the reply guys.
I read also this still trips Knox.
Click to expand...
Click to collapse
For sure. Knox can be reset and worked around at a later date so its really not a big deal but at the moment it will indicate 0x1 on the stock recovery indicating you have rooted your device.
What I want to know is how to get the Native hotspot working. My Galaxy tools APK is not doing the trick and the APN settings are completely different. anyone have this issue???
chuxmix said:
For sure. Knox can be reset and worked around at a later date so its really not a big deal but at the moment it will indicate 0x1 on the stock recovery indicating you have rooted your device.
What I want to know is how to get the Native hotspot working. My Galaxy tools APK is not doing the trick and the APN settings are completely different. anyone have this issue???
Click to expand...
Click to collapse
Hmm i tried thevgalaxy tools and it worked for me
chuxmix said:
For sure. Knox can be reset and worked around at a later date so its really not a big deal but at the moment it will indicate 0x1 on the stock recovery indicating you have rooted your device.
What I want to know is how to get the Native hotspot working. My Galaxy tools APK is not doing the trick and the APN settings are completely different. anyone have this issue???
Click to expand...
Click to collapse
Can we see a screenshot of your apn's? They can be opened editable without msl if you change sales_code in galaxy tools to XAS and reboot phone.
Also a copy of the file after a ##scrtn#
Enter that in dialer and wait till phone reboots and finishes, then click enable native hotspot only once and post telephony.db.bk for me to see. (it will be in root of internal sdcard)
---------- Post added at 01:15 PM ---------- Previous post was at 01:03 PM ----------
@chuxmix
Go see last couple posts in that thread, what helped the last user might help you too.
Well the apns look completely different and the ##scrtn# only forces me to reboot then reactivate then reboot all over again.
chuxmix said:
Well the apns look completely different and the ##scrtn# only forces me to reboot then reactivate then reboot all over again.
Click to expand...
Click to collapse
Everyones can look like that. Change sales_code like I said, reboot and they WILL open editable, and you will then be able to select/edit them. Or try the forced lte like I suggested in the other thread (and it worked for that user)
And the point of the scrtn was for you to grab that file. It resets your apns to default (deletes all but ota ones) then reboots and pulls new apns from the network.
Already XAS opened this but im not sure how to force the lte or what to edit it to??? ÷Edit. Woops i got it now!!! it was able to reset and i opened up the selected right after i clicked the Enable hotspot button and it had the ,dun already in place. Thanks Idone
chuxmix said:
Already XAS opened this but im not sure how to force the lte or what to edit it to???
Click to expand...
Click to collapse
You don't need to edit them, you thought your apns were different but they are not.
click enable hotspot in galaxy tools, wait 10 seconds or so, go into your apns and select ehrpd then select lte.
Now go test turning on hotspot.
The force lte setting is accessible through IOTHiddenmenu. I was just saying to do that if you go into apns and have none of them selected(because tethering requires one of the 2 internet apns to be active/selected) and sometimes the phone is weird and no apn is selected.
Thanks to a few memebers here for posting back. I went ahead and used CF AUTO ROOT to root the newest firmware. Below is screen shot in Odin mode.
Some issues to share;
First, if i want to use my home wifi, I have to reboot my phone for it to work. Can anyone confirm this?
Second, thanks to the galaxy tool, I now have hotspot again.
My issue here, it only allows one device to connect at a time. For the use of another device, I have to turn off one.
Anyone having these issues?
ssuraj83 said:
Some issues to share;
First, if i want to use my home wifi, I have to reboot my phone for it to work. Can anyone confirm this?
Second, thanks to the galaxy tool, I now have hotspot again.
My issue here, it only allows one device to connect at a time. For the use of another device, I have to turn off one.
Anyone having these issues?
Click to expand...
Click to collapse
Hi,
First if you enjoy GalaxyTools consider buying me a drink.
Second in hotspot go to configure>scroll to bottom and select "show advanced options">scroll to bottom again> max user can be up to 8
If you have more devices I can give you command to send from terminal to try and increase it.. I've not enough wifi devices to test more than 8 sorry.
Good luck!
****edit****
Yes just tested I can increase max users, will add this to GalaxyTools later today and post update.
***edit***
GalaxyTools updated, add as many hotspot users as you like!
http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159
idone said:
Hi,
First if you enjoy GalaxyTools consider buying me a drink.
Second in hotspot go to configure>scroll to bottom and select "show advanced options">scroll to bottom again> max user can be up to 8
If you have more devices I can give you command to send from terminal to try and increase it.. I've not enough wifi devices to test more than 8 sorry.
Good luck!
****edit****
Yes just tested I can increase max users, will add this to GalaxyTools later today and post update.
***edit***
GalaxyTools updated, add as many hotspot users as you like!
http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159
Click to expand...
Click to collapse
Thank you for replying.
I figured it out once I started to mess with it.
Can someone chime in and tell me what the 4 means?
Knox warranty void: 0x1 (4)
lolz @ attached pic
Flash counter ?
ssuraj83 said:
Thanks to a few memebers here for posting back. I went ahead and used CF AUTO ROOT to root the newest firmware. Below is screen shot in Odin mode.
Some issues to share;
First, if i want to use my home wifi, I have to reboot my phone for it to work. Can anyone confirm this?
Second, thanks to the galaxy tool, I now have hotspot again.
My issue here, it only allows one device to connect at a time. For the use of another device, I have to turn off one.
Anyone having these issues?
Click to expand...
Click to collapse
Check out my post 4.4.4 ( Download Mode ) below, that I made right after I upgraded to 4.4.4, now check out the post above. Is that number (4) a flash counter ?
I have since gone back to 4.4.2, there's to many problems with 4.4.4. So is anyone rooted with 4.4.4 that can check this out ?
Does it reset if you unroot the device and go back to official stock ?
I was reading your post aswell.
I only flashed/rooted this phone yesterday using odin3 v3.07 and noticed you can't uncheck F.reset time. Now, my binary and sytem says custom.
See below screen shot.
I am not running a custom recovery.
If i wanted to go back to nc5, can I use odin to do that?
Thanks.
ssuraj83 said:
I was reading your post aswell.
I only flashed/rooted this phone yesterday using odin3 v3.07 and noticed you can't uncheck F.reset time. Now, my binary and sytem says custom.
See below screen shot.
I am not running a custom recovery.
If i wanted to go back to nc5, can I use odin to do that?
Thanks.
Click to expand...
Click to collapse
Odin can put you back to nc5.
And if you can't uncheck it on the menu do it in Odin3.ini
[APOption]
FResetTime=0
I will try it.
Thanks idone.
SAC23 PORTED MOAR N3
tdunham & rompnit
… Proudly Present …
[M]other [O]f [A]ll [R]oms ..aka.. MOAR
Take control of your phone
OP HOST LINK
MY MIRROR HOST LINK # 1
MY ANDROID FILE HOST # 2
MD5 74ad7725fa79dabfb7853fce52b614e1
WHATS BROKEN
CAMERA S5
GUYS MAKE SURE IF IT DOESENT BOOT JUST REMOVE BATTERY AND REBOOT U MAY HAVE TO DO IT 2 TIMES BUT IT WILL BOOT[/SIZE]
Click to expand...
Click to collapse
This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
saved 1
New Recovery update for NOTE 3
bigbiff said:
Can you test http://techerrata.com/bigbiff/openrecovery-twrp-2.8.5.0-hltespr.img.tar
If it works well I will push it out.
Click to expand...
Click to collapse
wormy987123 said:
Booted up made back up and was able to restore. Anything else you want tested?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
saved 2
For future use
saved 3
For future use
saved 4
For future use
saved 5
For future use
Cannot install as OP describes.
Only way I've found is to flash @sac23 TWLP 5.0 V2 then dirty flash MOAR LP.
Biggest issue I've found, to make this not a daily driver is when calling, other people on line cannot hear a word you're saying.
Back to N4 port.
Nickitt said:
Cannot install as OP describes.
Only way I've found is to flash @sac23 TWLP 5.0 V2 then dirty flash MOAR LP.
Biggest issue I've found, to make this not a daily driver is when calling, other people on line cannot hear a word you're saying.
Back to N4 port.
Click to expand...
Click to collapse
@Nickitt
We are working in the incall issue with @sac23
Just out of curiosity. With this being an S5 port and if anyone remembers the original S5 port. Anyone having issues with the mic. and sound issues. Have you guys messed with any of the sound options in mod control? Like normal, loud, extreme sound mods. Not sure if @sac changed them, if he did not then when trying them on the note 3 it will break the mic. because they are meant for the S5. Just asking. I have been running this since this afternoon and have had many calls today and no issues here. I have not messed with the sound mods.
fsunoles101 said:
Just out of curiosity. With this being an S5 port and if anyone remembers the original S5 port. Anyone having issues with the mic. and sound issues. Have you guys messed with any of the sound options in mod control? Like normal, loud, extreme sound mods. Not sure if @sac changed them, if he did not then when trying them on the note 3 it will break the mic. because they are meant for the S5. Just asking. I have been running this since this afternoon and have had many calls today and no issues here. I have not messed with the sound mods.
Click to expand...
Click to collapse
You would be the first person that has flashed this Rom to have working sound/mic in calls. Yes, people can receive and call perfectly fine but when you talk, no one can hear you.
I've flashed this Rom 3 times now differently and messed with some system applications in hopes of fixing this issue myself but to no extent.
If you can actually talk to the other person please tell us how you went about installing. Thanks.
sac23 said:
incoming sound fix test v1
let me know guys
http://www.mediafire.com/download/3ez7uil20zktcjz/moar_incoming_call_sound_fix_test.zip
Click to expand...
Click to collapse
Sent from my SM-G900P
Please try this test for in call hearing loss and report back
rlmiller said:
Sent from my SM-G900P
Please try this test for in call hearing loss and report back
Click to expand...
Click to collapse
Does work for me. Perfect, thank you.
When using automatic brightness it seems at though it goes all the way dim so you'll have to un-check auto and set it to your liking.
When disabling the s finder and quick connect in MOAR settings, it is still there when on the lock screen and you pull the notification bar down.
When pulling s-pen out, you cannot use pen on screen doesn't recognize you're touching the screen with the pen.
It realizes you've pulled it out from the slot but that's about it.
Has anyone have bluetooth working? I haven't been able to get to work.
Jose Reyes said:
Has anyone have bluetooth working? I haven't been able to get to work.
Click to expand...
Click to collapse
Here you go dude. Go here. Download V2 and flash in recovery. Should take care of your Bluetooth issues.
http://forum.xda-developers.com/showthread.php?t=2938607
Anyones phone crashing? Its been happening several times a day. It says something like security watchdog bit.
Sent from my SM-G900P using XDA Free mobile app
fsunoles101 said:
Here you go dude. Go here. Download V2 and flash in recovery. Should take care of your Bluetooth issues.
http://forum.xda-developers.com/showthread.php?t=2938607
Click to expand...
Click to collapse
This patch did not work on my device... thanks Went back to Sac's Note 4 ROM....
Edit: I reflashed the ROM waited until it was completly setup then rebooted and flash this patch and it does work
Working?? It is for me.
Ok so this is what I did, None of this is my work, I took no part in any of this development, I think I just got lucky.
Wipe
Wipe
Wipe
Installed Sacs ported rom V2, no reboot straight back into Recovery
Installed Sacs Moar Port, no reboot straight back into Recovery
Installed Sacs Moar Port fix for the mic problem
Wiped cache and davlik rebooted system
Went thru the entire setup made sure things were good and made a backup
Then I dirty flashed this right over....
http://forum.xda-developers.com/gal...-tw-note-4-port-5-0-1-darklord-rom-1-t3017604
This is the link for the 1.4 file https://mega.co.nz/#!XYw0TArb!7DoNDNHAK-1H0RBcyUMR0qPPtdarKCtR6uA7QTKeiDw
It kept just enough of Sacs rom to work... bluetooth works, data works, S pen works, Camera works, Lte works......
It is no longer a MOAR Rom its a Note 4 Lollipop port with alot of worknig stuff.
I'm about to do it in reverse and see what happens.. wish me luck.
rancherochido said:
Ok so this is what I did, None of this is my work, I took no part in any of this development, I think I just got lucky.
Wipe
Wipe
Wipe
Installed Sacs ported rom V2, no reboot straight back into Recovery
Installed Sacs Moar Port, no reboot straight back into Recovery
Installed Sacs Moar Port fix for the mic problem
Wiped cache and davlik rebooted system
Went thru the entire setup made sure things were good and made a backup
Then I dirty flashed this right over....
http://forum.xda-developers.com/gal...-tw-note-4-port-5-0-1-darklord-rom-1-t3017604
This is the link for the 1.4 file https://mega.co.nz/#!XYw0TArb!7DoNDNHAK-1H0RBcyUMR0qPPtdarKCtR6uA7QTKeiDw
It kept just enough of Sacs rom to work... bluetooth works, data works, S pen works, Camera works, Lte works......
It is no longer a MOAR Rom its a Note 4 Lollipop port with alot of worknig stuff.
I'm about to do it in reverse and see what happens.. wish me luck.
Click to expand...
Click to collapse
Good luck brother let us know how it goes
fsunoles101 said:
Here you go dude. Go here. Download V2 and flash in recovery. Should take care of your Bluetooth issues.
http://forum.xda-developers.com/showthread.php?t=2938607
Click to expand...
Click to collapse
I extracted the missing files from this zip and placed them in the appropriate folders, fixed permissions, rebooted and bluetooth works!
Thanks for the great find!
hey guys can i go to back to a mja modem from nh7 ?
Major credits again to @zachariahpope for the Lollipop build earlier tonight. Unfortunately getting it rooted from stock won't work. Which is why I proceeded to try the same method from my rooting guide to attempt root. And I am proud to say...I HAVE THE ROOTED LOLLIPOP SONY XPERIA Z3V!!!
And also, I have recovery as well.
If you're going to follow in the same footsteps, please PLEASE remember when you get the supersu file, grab the v2.49 as that is for LOLLIPOP.
@GigaSPX Make one of these in the development section too!!
well, looks like its time to flash
I thought this day would never come!!
Sent from my D6708 using Tapatalk
where is it? can I just root the phone when I Flash it back to stock root from there and not take the OTA and go straight to the pre-root for Lolipop?
GhostTrunks said:
where is it? can I just root the phone when I Flash it back to stock root from there and not take the OTA and go straight to the pre-root for Lolipop?
Click to expand...
Click to collapse
If you want root, you need to preroot. Otherwise, you won't have it at all.
Also this is an update: it seems it's still Verizon holding all of us by the edge about VoLTE. I tried activating it but it won't work. Still can't browse and call at the same time dammit.
Is this patched for Stagefright?
rooted lollipop for z3v ,,,,,,,,,, congrats
1linuxfreak said:
Is this patched for Stagefright?
Click to expand...
Click to collapse
Unfortunately... no.
GigaSPX said:
Unfortunately... no.
Click to expand...
Click to collapse
Giga, any success in actually using Advanced Calling? I can't seem to get it to work, even after "activating" it on the phone
srsaloom said:
Giga, any success in actually using Advanced Calling? I can't seem to get it to work, even after "activating" it on the phone
Click to expand...
Click to collapse
No, that's what I've been trying to tell a lot of people now. It's still all in the hands of the big red...
srsaloom said:
Giga, any success in actually using Advanced Calling? I can't seem to get it to work, even after "activating" it on the phone
Click to expand...
Click to collapse
You must also activate it from your vzw account.
GigaSPX said:
No, that's what I've been trying to tell a lot of people now. It's still all in the hands of the big red...
Click to expand...
Click to collapse
Figured so, just wasn't sure if I'd missed a memo somewhere along the way. Appreciate it!
Delebird said:
You must also activate it from your vzw account.
Click to expand...
Click to collapse
srsaloom said:
Figured so, just wasn't sure if I'd missed a memo somewhere along the way. Appreciate it!
Click to expand...
Click to collapse
Yeah, and can't activate it on the Verizon account when it won't let you to.
Has anyone tried installing Xposed? I can't flash to install.
GigaSPX said:
Has anyone tried installing Xposed? I can't flash to install.
Click to expand...
Click to collapse
Just installed it. v74-sdk21-arm . Gave me a little scare, as it hung on the Sony logo after rebooting. Also, upon that initial reboot, the lockscreen was vacant and couldn't get beyond what should've been there. Had to long-press power to bring up power menu and select reboot.
Following that, things seem to be working fine. Xposed Installer crashes if you click on xda support links in module pages, and the installation of xposed modules from within the Xposed installer can take significantly longer than it did on KK.
GigaSPX said:
No, that's what I've been trying to tell a lot of people now. It's still all in the hands of the big red...
Click to expand...
Click to collapse
Not sure if this helps, but, I jumped from this phone to the LG G4. We don't have much development but, some rooted users don't have advanced calling because they are rooted. I am a non-rooted user with advance calling. To add another variable to the equation, you have to have the My Verizon Mobile app installed and not disabled to at least initiate advanced calling. Some of the rooted users I think figured that out.
srsaloom said:
Just installed it. v74-sdk21-arm . Gave me a little scare, as it hung on the Sony logo after rebooting. Also, upon that initial reboot, the lockscreen was vacant and couldn't get beyond what should've been there. Had to long-press power to bring up power menu and select reboot.
Following that, things seem to be working fine. Xposed Installer crashes if you click on xda support links in module pages, and the installation of xposed modules from within the Xposed installer can take significantly longer than it did on KK.
Click to expand...
Click to collapse
Big thanks here. Fully updated now, and with this tip I'm running xposed as well.
Uninstalled old xposed first (may not have been necessary)
TWRP dirty flashed pre-rooted 5.0.2 zip from post 44 of that lollipop dev thread
After boot TWRP isntalled v74-sdk21-arm module
Installed xposed_installer.apk and added back my most used modules
-chromepie
-xtether (still working )
Didn't bother with xperiaxposed, not even sure if it's updated. Never really used it
Also, I like this boot animation, not that it's of any importance http://forum.xda-developers.com/z3/themes-apps/bootanimation-xperia-z3-t3079263
darker_slayer said:
Big thanks here. Fully updated now, and with this tip I'm running xposed as well.
Uninstalled old xposed first (may not have been necessary)
TWRP dirty flashed pre-rooted 5.0.2 zip from post 44 of that lollipop dev thread
After boot TWRP isntalled v74-sdk21-arm module
Installed xposed_installer.apk and added back my most used modules
-chromepie
-xtether (still working )
Didn't bother with xperiaxposed, not even sure if it's updated. Never really used it
Also, I like this boot animation, not that it's of any importance http://forum.xda-developers.com/z3/themes-apps/bootanimation-xperia-z3-t3079263
Click to expand...
Click to collapse
I did much the same but I did not uninstall xposed before I flashed and it wouldnt let me uninstall it after I upgraded to lollipop. But I flashed and installed the files above and it works great. Xperia Xposed works use v1.7 cause it's the only one that works.
Just wish there was a foolproof way to get rid of those useless small apps
darker_slayer said:
Just wish there was a foolproof way to get rid of those useless small apps
Click to expand...
Click to collapse
They're super useful to me, being all multitasking useful and all. loll