Related
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
Alright i bought a new Tablet Videocon VT71, running on Andriod 4.0.3. I was kind of trying to root and upgrade android as the provider didn't had any update on their end. After 2 days of continues searching and trial and error every method i can find. I could not root my device. I tried rooting it with one click root which gave me ADB error despite i have ADB installed on my pc (i checked it).
Will someone be generous enough and help this noob out. As i am struck with this.
Hello all at XDA!
I'm new here and to the Android OS. Got a " Pyle Astro PTBL92BC " for yule. (I bet you all have heard this before)
I managed to root it using " ROOTx " but now I want to Dive in to Custom ROMs and tweaks. I have been looking on the net, and found not much info about Pyle's Tablets at all.. looks like a Generic android tablet nothing special about it.
Have been reading and looks like I should install something like ClockworkMod Recovery but looking at CWM's site their is a lot of versions... I don't know how to find the right one for me.. So if and when I mess this up, I can fix it and not hurt my father in-laws feelings for bricking his present to me.
So what info do I need to find the right one? all I can tell you about is..
Model:
PTBL92BC
Android Ver:
4.0.4
Baseband:
1.5
Kernel:
3.0.8+ [email protected] #1
Build #: 913A.V2.10.TZX.R01.BT.eng.0826.1009
Thanks a lot!
Unfortunately, there is no custom recoveries for your device. With that being said, there really isn't much we can say about ROMs either.
Pyle help
I managed to root it using " ROOTx " but now I want to Dive in to Custom ROMs and tweaks. I have been looking on the net, and found not much info about Pyle's Tablets at all.. looks like a Generic android tablet nothing special about it.
Click to expand...
Click to collapse
Yes, I am a newb, but I thought ROOtx couldn't actually ROOT a device. Is this wrong? Could you explain further?
I have had success on rooting the device using the Kingo rooting tool for PC. I have rooted the device and now I am working on a CWM recovery for it which I have booted successfully into but haven't been able to mount sd card or anything correctly yet.
zonark said:
I have had success on rooting the device using the Kingo rooting tool for PC. I have rooted the device and now I am working on a CWM recovery for it which I have booted successfully into but haven't been able to mount sd card or anything correctly yet.
Click to expand...
Click to collapse
I was wondering how you got Kingo to recognize the tablet. Im having trouble getting windows to recognize the tablet once i put it in USB debugging mode. Do you have some Pyle USB drivers? Or is there a step im missing here.
Kingo "recognized" it once, but it was as a samsung galaxy so i assumed it would be bad to proceed with a Root when the program was assuming it was a different device. Any advice for me?
Thanks!
Help with Pyle Astro PTBL92BC
Hi, Next time I tried to turn on Pyle Astro PTBL92BC tablet, after trasfering files from other tablet by bloototh, it has got stuck on starting screen with the “Android” logo and it stays on it and does nothing more so I have to turn it off. It is not recognized when connected to pc either. What should I do to fix it? Is there a way to re install a fresh copy of Android?
Please, help!
I figured it out!!!
estebanhg1967 said:
Hi, Next time I tried to turn on Pyle Astro PTBL92BC tablet, after trasfering files from other tablet by bloototh, it has got stuck on starting screen with the “Android” logo and it stays on it and does nothing more so I have to turn it off. It is not recognized when connected to pc either. What should I do to fix it? Is there a way to re install a fresh copy of Android?
Please, help!
Click to expand...
Click to collapse
I was in the same situation after trying to flash some random CWM not compatible with this chinese tablet.
To reflash the original firmware on it you need the flashing tool: PhoenixUSBPro
AND
you need the firmware (.IMG) file . this one was provided to me by the manufacturer: PTBL9C
Image file only HERE
Only inconvenience is that it is not the one for the Bluetooth capable Tablet ( their mistake).
Once I have the one for the PTBL92BC ( bluetooth capable) I will update .
Instructions on how to use that tool is summed up in the picture within the file attached PTBL9C.
BUT
If you need clearer steps you can follow instructions HERE
---------- Post added at 05:10 PM ---------- Previous post was at 04:47 PM ----------
serik21 said:
I was wondering how you got Kingo to recognize the tablet. Im having trouble getting windows to recognize the tablet once i put it in USB debugging mode. Do you have some Pyle USB drivers? Or is there a step im missing here.
Kingo "recognized" it once, but it was as a samsung galaxy so i assumed it would be bad to proceed with a Root when the program was assuming it was a different device. Any advice for me?
Thanks!
Click to expand...
Click to collapse
Just follow these instruction from another thread in XDADev. : HERE
It works for that tablet. Now Once you have root you can install Super SU pro and set it as a native app.
Hello I bought this product http://www.staples.com/Nobis-7-inch-8GB-Tablet/product_1052513
But I cant find anything to root it can anyone please help?
darkphate83 said:
Hello I bought this product http://www.staples.com/Nobis-7-inch-8GB-Tablet/product_1052513
But I cant find anything to root it can anyone please help?
Click to expand...
Click to collapse
As an alternative, is there a way to install CM-10 or CM-11 on it? (yeah, I expect if no developers have one here, it might be difficult to develop an image for it). For now I haven't needed to root it, as it's doing what I need for now, but if I want to start moving apps (or app data) off to a microSD card, I may need a root or CM1x version (and Google needs to be *smacked* for disabling SDcard functionality in later Android versions).
I have just purchased one of these NB7022S tablets from Staples as well. I have unsuccessfully been trying to root it for the last couple of days. Any help would be greatly appreciated
I have one of these Nobis NB7022s tablets as well, but the screen has been broken. So since the tablet isn't usable in it's current state, would it be of use to someone to do a teardown/analysis of the device in order to make a CyanogenMod port to it?
success
Just rooted the nb7022s using kingo root. First download the android software developer kit on your pc then open the sdk manager and download every possible update in order to have the correct drivers, not sure which one did the trick because i just downloaded everything. Then in your tablet go to settings-about tablet- then scroll down to build number and click 7 times to unlock developers options on the main settings screen. Go to developers options and turn it on and enable usb debugging. Plug tablet into your PC and install and run kingoroot. Should connect and root your tablet and automatically install superuser. Now I just need to figure out what version of clockworkmodrecovery to flash as recovery because this tabket does not have a supported cwmr, any help on that would be awesome because i dont want to brick my very first rooted device lol. Hopefully this info might help another newbie like myself.
thanks buzzdb666 for the tip on rooting. However, now every time I turn off the tablet and on, it always does a factory reset/wipe so I have to reinstall everything . Wondering if you've encountered the same thing?
Would be an interesting experiment to try, but again, the tablet has a broken screen, and I can't have a mouse *and* a connection to the computer at the same time. I had thought I could at least get the debug info from the tablet in case someone wants to develop an image for a non-broken unit. Once again, it's available if any XDA developers would like to use it for tear-down or testing, since I can't do much with it otherwise. Unless there's a way to extract what someone would need via a microSD card.
Mine is doing the same thing after using Kingo Root. Not sure what can be done since I can't go backwards now.
Hi All,
I'm new to the forum(what a great please btw) and am looking for help on how to flash/root the 101b Neon, I had a 101 Neon which I managed to root with VROOT, however it had a power issue(no charge) so returned it for a 101b, which runs KitKat(required for some of the apps I want|)
However for the life of me I can't root it, I've tired VROOT, KINGROOT, a couple of chinese apps to root it, all fail(reboots, screen goes grey, tried it a few times to no avail) . I also want to flash the CWM (tried it with Arctools) but nothing. I've found a few posts where people have recommened downgrading to 4.2, however I need 4.4 for several reasons....(remoteplay app port on XDA-developers being one!)
Really looking for some help as I'm totally lost, I know it has a RK 3188T CPU similar to the 101 XS and apparently runs a " pure Android 4.4 ‘KitKat operating system without any skins or overlays."
. Is the 101b actually a Gen10 system?
Hope someone can help.
I was thinking that would it be possible to extract the update.img file(found a tool that did it) and then manually inject full root privileges(not sure if the correct term) into the boot.img? then repack back together and then reflash onto the tablet?
Or alternatively extract all the relevant drivers out of the extracted kernal/system img and add then to a generic 4.4.2 rooted rom?
The parameter file in the unpacked firmware has the following info
FIRMWARE_VER:4.4.2
MACHINE_MODEL:rk30sdk
MACHINE_ID:007
MANUFACTURER:RK30SDK
MACHINE: 3066
Am I right in thinking that it looks like the 101b Neon uses a rk3066 CPU rather than the stated RK 3188T ??
Sorry If the above doesn't make sense as I'm only about a week or so into owning an android device....
...
Anyone help?
Any luck with that?
DForce said:
Anyone help?
Click to expand...
Click to collapse
I have recently got one of these archos tablets but this has 4.4.4 and i cant find anything to root it either. pulling my hair out and theres not much left lol
Yes! Finally did it with Kingo ROOT, it took a few attempts but eventually "fetched" the right scripts(I'm assuming it tries several), it finally rebooted, check it with root-check tool and it's all done!
Let me know if it works, or if your stuck
DForce said:
Yes! Finally did it with Kingo ROOT, it took a few attempts but eventually "fetched" the right scripts(I'm assuming it tries several), it finally rebooted, check it with root-check tool and it's all done!
Let me know if it works, or if your stuck
Click to expand...
Click to collapse
I was also looking to root mine and looked at this topic 2 weeks ago. Tried some rooting programs but nothing worked.
Thought I look at this topic again and YES! I'm rooted thanks to Kingo ROOT. First try without any problem.
need some help
i try to root my archos 101b neon but in kingo root gives that my tablet a samsung is ???
help can tell some one how to do it the right way
vangorp40 said:
i try to root my archos 101b neon but in kingo root gives that my tablet a samsung is ???
help can tell some one how to do it the right way
Click to expand...
Click to collapse
Keep trying, mine took ALOT of attempts but finally worked, it was a new device through, so nothing had barely anything installed....
Hi
Do you think I can try with 101c neon ?
By advance, thank you.
Fred