Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
I had a similar issue(more than once) and in my case I split the myFirmware file into it's 3 individual parts using Cygwin and SplitFUS2 and flashed from that with Odin 1.85. You could do this with FW file S5830IJPLK1_S5830IOJPLI1_XSG. I also used the pit file(cooperve_0623.pit), but I'm not sure if it was required but point is, it worked.
I also got out of trouble with the use of a backup which although not solid did get me out of trouble. The backup would not restore so I loaded ClockWorkMod recovery and in advanced restore, restored the system folder from my backup, this worked and got me into the phone. However you may not have a backup.
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
[email protected] said:
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
Click to expand...
Click to collapse
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
shijopj2012 said:
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
Click to expand...
Click to collapse
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
shijopj2012 said:
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
Click to expand...
Click to collapse
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Click to expand...
Click to collapse
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
Flash s5830i cwm.
Go to this link for cwm.
And then clear data cach and dalvik cache..and flash any stock based custom rom..
http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
If this solution doesn't work, then your only solution is USB Jig.
shijopj2012 said:
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Click to expand...
Click to collapse
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
First. u should download CMW for s5830i ,.copy it to your sd card.Then download a custom rom and flash it..
If u had made a backup before doing this u can restore it.In my case i restore it .if u encounter any error again inform me
amolgosavi said:
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
shijopj2012 said:
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
Click to expand...
Click to collapse
Whenever I flash back my stock rom using odin on my Galaxy Ace, it gives me a bootloop just like yours. The simple solution for this is go to recovery mod and do a "Wipe data/ factory reset". That's it now reboot. It should work fine. Please try this. Hope I Helped
use Odin3 v1.84 for Samsung Galaxy Ace-i instead
Its working........great.........
If u want to flash then use "Odin3.v3.07.Cooperve" and also put "cooperve_0623.pit" in pit tab...........
why odin3 v3.07 can't detect my phone, my phone displays odin mode and at the bottom donloading do not turn off target, nothing happens..
Related
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen after flashing froyo heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
Get the roms from sammobile site.
Be sure that you download de correct firmware for your device version.
Good mannnnnn ֱ
SuperMini said:
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it shoul come back to life.
Click to expand...
Click to collapse
Don't work for me...
you saved my day
I was about to send my phone to support centre!
Cool, brought back to life.
I wish we had a thread listing all these tricks.
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution for that. Did you try making usb test jig?
Sent from my GT-S5830 using Tapatalk
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution, I know several cases where people destroyed their Ace this way.
Why do people even bother to pamper with their phones when they have no clue...
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
isnwinyetra said:
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Did it working???
Thanq... Thanq...
works fine for me.. great job.
what is the password on .rar files?
korbin3103 said:
what is the password on .rar files?
Click to expand...
Click to collapse
samfirmware.com
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
big thanks dude, this small help, really a big help
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
How did that happen? Did you try to install Clockworkmod recovery?
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
forall.sri said:
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
Click to expand...
Click to collapse
Firstly close the KIES. If closed and Still nothing, try to change the connected PC USB port. Hope it helps!
CHEERS!
Hello everyone I have the Galaxy ace brick and download mode but does not exit by pressing the volume up + power + home connects to the PC but remains in connection with odin you can 'do something or should I send him to assist with
or tried to do a backup with Rom manager and is' off my rom 2.3.4 root
I remain blocked setup connection
Tanks
did u try to remove battery ?
if not try remove and enter download mode again, this should help u .
yes remove the battery and put it as a guide, I will connect if I press the volume up
tomorrow the port to help center
Thank you
Please please please could anyone help!
About a month ago I upgraded to Ice cream sandwich (LP7) and then rooted my S2. All worked fine for 3 or 4 days and then suddenly it crashed for no reason. I suspect, but am not sure, that it did an automatic update. On rebooting it just stops at the Samsung S2 screen with a yellow triangle.
For the last few weeks i have been trying to find a fix, but am at my wits end now.
I have gone through the different solutions on your site but to no avail also where mine seems to be different is that I can get into boot mode and odin always says its successful. I have tried different pc and usb cable too just in case that was an issue
I can not get into Volume up mode, but i can get into boot mode with volume down. I have tried re loading a few different rom's and Odin says that the transfer was successful each time, however it is still stuck at the same place on reboot.
Tried reloading kernel and re partitioning, and again Odin said it went OK, but still stuck on start screen.
Tried using a jig and turned phone on, but it the phone just went to the start screen again.
If i could just get into reset mode, i could clear the memory, but this is not working either.
If anyone could help i would be very so grateful.
Thanks
Terry
mcguirestick said:
Please please please could anyone help!
About a month ago I upgraded to Ice cream sandwich (LP7) and then rooted my S2. All worked fine for 3 or 4 days and then suddenly it crashed for no reason. I suspect, but am not sure, that it did an automatic update. On rebooting it just stops at the Samsung S2 screen with a yellow triangle.
For the last few weeks i have been trying to find a fix, but am at my wits end now.
I have gone through the different solutions on your site but to no avail also where mine seems to be different is that I can get into boot mode and odin always says its successful. I have tried different pc and usb cable too just in case that was an issue
I can not get into Volume up mode, but i can get into boot mode with volume down. I have tried re loading a few different rom's and Odin says that the transfer was successful each time, however it is still stuck at the same place on reboot.
Tried reloading kernel and re partitioning, and again Odin said it went OK, but still stuck on start screen.
Tried using a jig and turned phone on, but it the phone just went to the start screen again.
If i could just get into reset mode, i could clear the memory, but this is not working either.
If anyone could help i would be very so grateful.
Thanks
Terry
Click to expand...
Click to collapse
You need to flash a ROM that will wipe your data at once.
Is your phone GT I9100 or GT I9100G?
Jokesy said:
You need to flash a ROM that will wipe your data at once.
Is your phone GT I9100 or GT I9100G?
Click to expand...
Click to collapse
It Is a GT-I9100
mcguirestick said:
It Is a GT-I9100
Click to expand...
Click to collapse
Follow these steps:
1. Download CM9 Resurrection editon
2. Flash CM9 Ressurection edtion via Odin
done.
Let me know how it goes.
Jokesy said:
Follow these steps:
1. Download CM9 Resurrection editon
2. Flash CM9 Ressurection edtion via Odin
done.
Let me know how it goes.
Click to expand...
Click to collapse
Didnt knew roms could be flashed through odin, are they also flashed through the PDA section?
Poroto said:
Didnt knew roms could be flashed through odin, are they also flashed through the PDA section?
Click to expand...
Click to collapse
That is a special .tar edition. You simply flash it just like a single file firmware (as PDA).
Good luck
Jokesy said:
That is a special .tar edition. You simply flash it just like a single file firmware (as PDA).
Good luck
Click to expand...
Click to collapse
Hi Tried it exactly the same im afraid Odin says successful phone reboots then sits at Samsung s2 screen and goes no further
mcguirestick said:
Hi Tried it exactly the same im afraid Odin says successful phone reboots then sits at Samsung s2 screen and goes no further
Click to expand...
Click to collapse
can you enter recovery now?
Jokesy said:
can you enter recovery now?
Click to expand...
Click to collapse
Hi, Nope still can only get to boot load not recovery
mcguirestick said:
Hi, Nope still can only get to boot load not recovery
Click to expand...
Click to collapse
I think your data partition is corrupt, but you can still get it solved.
You need to special .pit file. I'll post you the link (for the .pit file and instructions) very soon
Try this it worked for me
mcguirestick said:
Please please please could anyone help!
About a month ago I upgraded to Ice cream sandwich (LP7) and then rooted my S2. All worked fine for 3 or 4 days and then suddenly it crashed for no reason. I suspect, but am not sure, that it did an automatic update. On rebooting it just stops at the Samsung S2 screen with a yellow triangle.
For the last few weeks i have been trying to find a fix, but am at my wits end now.
I have gone through the different solutions on your site but to no avail also where mine seems to be different is that I can get into boot mode and odin always says its successful. I have tried different pc and usb cable too just in case that was an issue
I can not get into Volume up mode, but i can get into boot mode with volume down. I have tried re loading a few different rom's and Odin says that the transfer was successful each time, however it is still stuck at the same place on reboot.
Tried reloading kernel and re partitioning, and again Odin said it went OK, but still stuck on start screen.
Tried using a jig and turned phone on, but it the phone just went to the start screen again.
If i could just get into reset mode, i could clear the memory, but this is not working either.
If anyone could help i would be very so grateful.
Thanks
Terry
Click to expand...
Click to collapse
Try this
Try this step by step and it shoudl work!
Requirements
A Samsung Galaxy S2 GT-I9100
A Windows PC
Your phone’s USB cable
7-Zip, WinRAR, or any other programs that can extract archive files
Handset USB drivers installed on the PC. You may install the drivers by installing Samsung Kies.
Enable USB Debugging on your handset.
Disable antivirus, firewall, and other security software. Also disable Samsung Kies and other software that accesses your phone. Such software can interfere with the procedure in this guide.
Download the following files to your computer:
Android 4.0.4 ICS firmware build XXLQ5 (I9100XXLQ5_I9100OXALQ5_OXA.zip, 387.1 MB)
copy and paste
hotfile.com/dl/162208594/226b6f0/I9100XXLQ5_I9100OXALQ5_OXA.zip.html
Odin3 1.85 (Odin 1.85.zip,199 kB)
Make sure your phone’s battery is charged up to 75% or more to avoid interruptions during the process.
Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.
Instructions
Extract the contents of the I9100XXLQ5_I9100OXALQ5_OXA.zip file to get these files:
I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5
GT-I9100-MULTI-CSC-OXALQ5.tar.md5
MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5
u1_02_20120326_emmc_EXT4_8GB.pit
Extract the contents of the Odin 1.85.zip file to obtain the Odin3 v1.85.exe file.
Double-click on the Odin3 v1.85.exe file to launch Odin on your computer.
Unplug your phone from the computer if it is connected. After unplugging, turn your phone off.
Put your phone into Download Mode. To do this, hold the Volume Down, Home, and Power buttons together until the screen turns on. Press the Volume Up key to put your phone into Download Mode.
Connect your phone to the PC using the USB cable. In Odin, a message saying “Added!!†will appear on the bottom left of the window.
In the Odin window, click on the PDA button and select the I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5file. The file should show on the space beside the PDA button.
Click on the PHONE button and select MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5 file. The file should show on the space beside the Phone button.
Click on the CSC button and select the GT-I9100-MULTI-CSC-OXALQ5.tar.md5file. The file should show on the space beside the CSC button.
Don’t alter anything else in Odin. Leave everything else as is, except for adding the files mentioned in steps 7 to 9.
Click on the Start button in Odin to start flashing the firmware to your phone.
After the flashing completes, your phone will automatically reboot. You should be able to get a “PASS†message on the top left part of Odin.
NOTE: If you get a FAIL message or Odin gets stuck, disconnect your phone from the PC and close Odin. Remove the battery from your phone, re-insert it, and place your phone into Download Mode again. Open Odin and do the procedure starting from step 6.
Once you see the Samsung logo on your phone’s screen, you can safely disconnect your phone from the PC.
Hope this helps!
ScottsDesk
ScottsDesk said:
Try this
Try this step by step and it shoudl work!
Requirements
A Samsung Galaxy S2 GT-I9100
A Windows PC
Your phone’s USB cable
7-Zip, WinRAR, or any other programs that can extract archive files
Handset USB drivers installed on the PC. You may install the drivers by installing Samsung Kies.
Enable USB Debugging on your handset.
Disable antivirus, firewall, and other security software. Also disable Samsung Kies and other software that accesses your phone. Such software can interfere with the procedure in this guide.
Download the following files to your computer:
Android 4.0.4 ICS firmware build XXLQ5 (I9100XXLQ5_I9100OXALQ5_OXA.zip, 387.1 MB)
copy and paste
hotfile.com/dl/162208594/226b6f0/I9100XXLQ5_I9100OXALQ5_OXA.zip.html
Odin3 1.85 (Odin 1.85.zip,199 kB)
Make sure your phone’s battery is charged up to 75% or more to avoid interruptions during the process.
Backup all personal data on your phone to make sure you have a copy of your personal data (e.g., contacts, SMS, MMS, Internet settings, Wi-Fi passwords, and the like) in case the procedure in this guide erases such data.
For backup tips, check our guides on how to sync your data to the cloud and how to create local backups of your mobile data.
Instructions
Extract the contents of the I9100XXLQ5_I9100OXALQ5_OXA.zip file to get these files:
I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5
GT-I9100-MULTI-CSC-OXALQ5.tar.md5
MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5
u1_02_20120326_emmc_EXT4_8GB.pit
Extract the contents of the Odin 1.85.zip file to obtain the Odin3 v1.85.exe file.
Double-click on the Odin3 v1.85.exe file to launch Odin on your computer.
Unplug your phone from the computer if it is connected. After unplugging, turn your phone off.
Put your phone into Download Mode. To do this, hold the Volume Down, Home, and Power buttons together until the screen turns on. Press the Volume Up key to put your phone into Download Mode.
Connect your phone to the PC using the USB cable. In Odin, a message saying “Added!!†will appear on the bottom left of the window.
In the Odin window, click on the PDA button and select the I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship.tar.md5file. The file should show on the space beside the PDA button.
Click on the PHONE button and select MODEM_I9100XXLQ5_REV_02_CL1165929.tar.md5 file. The file should show on the space beside the Phone button.
Click on the CSC button and select the GT-I9100-MULTI-CSC-OXALQ5.tar.md5file. The file should show on the space beside the CSC button.
Don’t alter anything else in Odin. Leave everything else as is, except for adding the files mentioned in steps 7 to 9.
Click on the Start button in Odin to start flashing the firmware to your phone.
After the flashing completes, your phone will automatically reboot. You should be able to get a “PASS†message on the top left part of Odin.
NOTE: If you get a FAIL message or Odin gets stuck, disconnect your phone from the PC and close Odin. Remove the battery from your phone, re-insert it, and place your phone into Download Mode again. Open Odin and do the procedure starting from step 6.
Once you see the Samsung logo on your phone’s screen, you can safely disconnect your phone from the PC.
Hope this helps!
ScottsDesk
Click to expand...
Click to collapse
Hi Tried it again no luck
mcguirestick said:
Hi Tried it again no luck
Click to expand...
Click to collapse
Sorry for not posting the link for the .pit file.
You can get the pit file here
Use the stock pit file first before trying the patched ones.
Follow the guide in this thread to revive your phone
Good luck
Jokesy said:
Sorry for not posting the link for the .pit file.
You can get the pit file here
Use the stock pit file first before trying the patched ones.
Follow the guide in this thread to revive your phone
Good luck
Click to expand...
Click to collapse
Shall we try the pit by itself or the pit with the rom
//
I belive we have the same problems:
http://forum.xda-developers.com/showthread.php?p=32546472#post32546472 (now that my phone flashs - page 2 -)
marceloasr said:
Shall we try the pit by itself or the pit with the rom
//
I belive we have the same problems:
http://forum.xda-developers.com/showthread.php?p=32546472#post32546472 (now that my phone flashs - page 2 -)
Click to expand...
Click to collapse
his case is milder than yours. he should get his problem fixed by follow the tutorial i posted.
TRY THIS!
mcguirestick said:
Hi Tried it again no luck
Click to expand...
Click to collapse
Try this I did and it worked to get mine booting after a bad update.
I messed around with it using several methods of getting it to boot into download mode until I finally got it to do it. I think I left it plugged into the USB, powered it down until I saw the charging screen, then I proceeded to play with the different ways to hold the buttons to get it to download mode. If you are persistent enough and read a little on booting methods to get bricked phone into download mode you will succed if not then your not for the world of trial and error... the main thing is do the first steps I said before until it works
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
or try
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
any how try try try until it works
Once in download mode
Get your files together for your phone, and use Odin 1.85.
Plug into Odin and make sure it shows yellow and its added!
1. Now if your files have like 3 files and the exact .pit file for your phone if available.
I found mine here (Find yous stock firmware for your phone)
CLICK HERE
2. Click the PIT button and browse to your exact .pit file for your phone *It should now have added a check in the re-partition box under the options area of the Odin window. If not CHECK IT!
***If you don't have your .pit don't worry about this unless you suspect, or have a bad partition
3. If you have just 1 file just click the PDA button and load the file. If you have 3 then you will load the PDA file in PDA, the Modem file into PHONE, and the CSC file into CSC, there are way too many phones to link all the files so get you stuff together!
4. Now hit start.
5. When done and the phone shows the first sign of starting up IE Logo or whatever... immediately unplug the battery from the phone to shut it down.
6. Now put it back in and start it in Upload mode by pressing Vol Up, Home at the same time then the Power button.
7. As soon as the phone shows the first sign of starting up IE Logo or whatever let go of all buttons and using the Vol Up down Choose the Clear Cache option and go through and make sure you factory reset it if you can just for good measure.
8. Reboot
9. Now when the phone shows the first sign of starting up IE Logo or whatever take out battery again to power off
10. Now put it back in and start it in Download mode by pressing Vol Down, Home at the same time then the Power button.
11. Once in download mode Hook up to Odin again and flash it with a root kernel for your phone. Do not ask me just find it. I did it took time but I got all the files together over several days of reading and collecting the correct ones.
12. When done and the phone shows the first sign of starting up IE Logo or whatever... immediately unplug the battery from the phone to shut it down.
13. Now put it back in and start it in Upload mode by pressing Vol Up, Home at the same time then the Power button.
14. In most roots you will now have a advanced or mounting options and more options to use.
15. I cleared the Cache again, Cleared the Davilik Cache, Went into a option and actually mounted the cache formatted the Cache.
16. Use the option now to restart the phone...
And mine started up installed the apps and I am up and running, nice and smooth and no issues so far
I hope this helps out someone whos just about to go off the deep end, as I was there and patience and trial and error came up with this step by step way to recover mine. Thank me by hitting the little thumbs up THANKS button below this post.
And if your so happy your phone is up show your appreciation by buying me a Pepsi
Jokesy said:
his case is milder than yours. he should get his problem fixed by follow the tutorial i posted.
Click to expand...
Click to collapse
Hi Once again no luck,
I have sent it away to go on a JTAG box will let you know if that fixes it.
I really appreciate all your help.
I will let you know what happens.
thanks
Terry
mcguirestick said:
Hi Once again no luck,
I have sent it away to go on a JTAG box will let you know if that fixes it.
I really appreciate all your help.
I will let you know what happens.
thanks
Terry
Click to expand...
Click to collapse
Sorry for your luck! Cheers!
xda-developers team thank you for helping us a lot. this is my first post. and i needs a help. i have samsung galaxy s2 i updated my phone into I9100XWLS8_I9100FOPLS3_FOP via odin. when it finished my phone does not turn on. whenever i turn it ON it goes into recovery mode. i tried a lot method but could not find right solution.
one of the link i tried
http://forum.xda-developers.com/showthread.php?t=1457458.
my phone install CUSTOM update,firmware perfeclyt but could not start my phone. anyone have solution of it or not. trying to be help me. thanks in advance.
NOTE: i can't even reboot my phone. it remain offed after installing update.
You have a galaxy s ii alright, what model? I9100?
So let me get this straight, you flashed via odin and the phone rebooted in CMW?
That would mean you didn't flash a thing.
Have you followed any flashing guide?
Sent from the little guy
samsung reboot issue
gastonw said:
You have a galaxy s ii alright, what model? I9100?
So let me get this straight, you flashed via odin and the phone rebooted in CMW?
That would mean you didn't flash a thing.
Have you followed any flashing guide?
Sent from the little guy
Click to expand...
Click to collapse
yes i have galaxy s2 model gt-i9100
i tried odin and CMW both i mean my problem is when i turn ON my phone it shows me samsung logo and goes into CMW recovery mode that shows in pic.
yes i flashed via CMW. wipe data/factory reset, wipe cache, advance > wipe dalvik cache. and install JELLY BAM and another another ROM CM 10 with GAAPS, but no result. after completing update when i go reboot my phone it still remain offed no logo , no black screen just remain offed.
hope you understand.
farhanfayaz said:
yes i have galaxy s2 model gt-i9100
i tried odin and CMW both i mean my problem is when i turn ON my phone it shows me samsung logo and goes into CMW recovery mode that shows in pic.
yes i flashed via CMW. wipe data/factory reset, wipe cache, advance > wipe dalvik cache. and install JELLY BAM and another another ROM CM 10 with GAAPS, but no result. after completing update when i go reboot my phone it still remain offed no logo , no black screen just remain offed.
hope you understand.
Click to expand...
Click to collapse
you flashed via odin by putting your device in download mode right?
did it restart after flashing the firmware? did you see result in the odin window?
if you can attach screenshot of the odin window it might help to understand the issue.
after flashing I9100XWLS8_I9100FOPLS3_FOP via odin, device should restart. first time it takes time. if you are stuck in samsung logo go in to recovery mode and do factory reset then restart the device. it should be fine.
samsung reboot issue
kmaq said:
you flashed via odin by putting your device in download mode right?
did it restart after flashing the firmware? did you see result in the odin window?
if you can attach screenshot of the odin window it might help to understand the issue.
after flashing I9100XWLS8_I9100FOPLS3_FOP via odin, device should restart. first time it takes time. if you are stuck in samsung logo go in to recovery mode and do factory reset then restart the device. it should be fine.
Click to expand...
Click to collapse
yes , i did it. flashed my device via odin in download mode. no it did not restart when ODIN installing firmware at the end it said RESET but my phone turn off not RESTART. and after 4-5 mint odin window show me pass message. but no phone restart. and it put out my phone battery and reinsert it then power ON it goes into CWM as i showed you in pic of attached.
samsung reboot issue
farhanfayaz said:
yes , i did it. flashed my device via odin in download mode. no it did not restart when ODIN installing firmware at the end it said RESET but my phone turn off not RESTART. and after 4-5 mint odin window show me pass message. but no phone restart. and it put out my phone battery and reinsert it then power ON it goes into CWM as i showed you in pic of attached.
Click to expand...
Click to collapse
this is the link which i followed
http://www.teamandroid.com/2012/10/...pw-android-404-ics-india-official-firmware/2/
http://reviews.cnet.co.uk/mobile-ap...ck-android-rom-on-samsung-galaxy-s2-50007880/
http://forum.xda-developers.com/showthread.php?t=1457458
farhanfayaz said:
yes , i did it. flashed my device via odin in download mode. no it did not restart when ODIN installing firmware at the end it said RESET but my phone turn off not RESTART. and after 4-5 mint odin window show me pass message. but no phone restart. and it put out my phone battery and reinsert it then power ON it goes into CWM as i showed you in pic of attached.
Click to expand...
Click to collapse
the CWM you have in the picture is custom not the stock recovery. if you flash official firmware it should have stock recovery.
samsung reboot issue
kmaq said:
the CWM you have in the picture is custom not the stock recovery. if you flash official firmware it should have stock recovery.
Click to expand...
Click to collapse
yes you are very right. i install new recovery via odin. but no result for both stock and custom recovery result is same. no reboot
i install last update
Phone Brand: Samsung
Phone Model: GT-I9100
Build Date: 03/04/2012
Android Version: 4.0.3
Type: Unbranded
PDA: XWLP7
PHONE (Modem): XXLPS
CSC: XEU
File Name: GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.7z
link is http://www.androidfirmwares.net/PhoneFirmware/Download/69
i installed recovery
CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5
jeboo_kernel_i9100_v1-2a
but issue remain same. no reboot of my phone always go into CWM when turn it ON
farhanfayaz said:
this is the link which i followed
http://www.teamandroid.com/2012/10/...pw-android-404-ics-india-official-firmware/2/
http://reviews.cnet.co.uk/mobile-ap...ck-android-rom-on-samsung-galaxy-s2-50007880/
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
Did you even read about what those links are meant for?
One is for flashing ICS, the other is for getting back to stock firmware, and the last one is for getting out of a soft-brick.
REBOOT into Download Mode (Home + Power + Vol. Down)
PLUG your device in your PC.
KILL all KIES process working on the background (If you don't have Kies, install it and then close it all up)
OPEN ODIN and select the JB LS8 tar file on PDA and press start.
When it says "pass", phone will reboot itself.
samsung s2 reboot issue
gastonw said:
Did you even read about what those links are meant for?
One is for flashing ICS, the other is for getting back to stock firmware, and the last one is for getting out of a soft-brick.
REBOOT into Download Mode (Home + Power + Vol. Down)
PLUG your device in your PC.
KILL all KIES process working on the background (If you don't have Kies, install it and then close it all up)
OPEN ODIN and select the JB LS8 tar file on PDA and press start.
When it says "pass", phone will reboot itself.
Click to expand...
Click to collapse
Firstly thank you for your time,....
Secondly i put all image file step wise you see and will tell me where am i going wrong.
explanation:
1) i reboot my S2 in download mode and connect to PC.
2) open Odin window show me yellow bar.
3) PDA click select firmware file
4) start button click
5) after pass message phone should be reboot but during RESET. my phone shut down and never ON.
6) disconnect to PC after PASS message.
7) power ON my phone but it do not ON. after 2,3 time remove battery and reinsert my phone ON but in CWM.
hope now it is clear for all. what is my real issue.! and what i want to you SOLUTION.
NOTE:
on 7th PIC my problem is start my phone do not reboot it remain offed.
farhanfayaz said:
Firstly thank you for your time,....
Secondly i put all image file step wise you see and will tell me where am i going wrong.
explanation:
1) i reboot my S2 in download mode and connect to PC.
2) open Odin window show me yellow bar.
3) PDA click select firmware file
4) start button click
5) after pass message phone should be reboot but during RESET. my phone shut down and never ON.
6) disconnect to PC after PASS message.
7) power ON my phone but it do not ON. after 2,3 time remove battery and reinsert my phone ON but in CWM.
hope now it is clear for all. what is my real issue.! and what i want to you SOLUTION.
NOTE:
on 7th PIC my problem is start my phone do not reboot it remain offed.
Click to expand...
Click to collapse
man....what the hell are you flashing there?
Where it says RESET it should say PASS.
If you get RESET again wait it out for 5 mins.
Try another odin version too.
And get LS8 from sammobile.
Sent from the little guy
i think you did not see the pic i attached. they clearly shows RESET before PASS message. whatever done during installing but phone is not rebooting. this is what i am asking. i again tried when yesterday and upload the photo attached. try with another ODIN version download ROM from sammobile
PDA I9100XWLS8
CSC I9100FOPLS3
but problem is WHEN I POWER ON MY PHONE IT GO TO RECOVERY. BUT IN ACTUAL WE GO RECOVERY BY PRESSING VOLUME UP+HOME BUTTON + POWER BUTTON.
i hope now it is clear for you.
now my phone does not charge. help me out of this problem
no phone charge
when power on it go itself in CWM
when i put my phone on charging it boot up in CWM itself
when i press VOLUME DOWN+HOME BUTTON+POWER BUTTON > to download mode it say LOOW BATTERY! can't download
i update 2 days before. LS8 update charging is 50% after that i am facing that problem ???? plzzz HELP 2 days go. i did not see my phone ON
I knw there is a solution just finding right one to solve my problem.
farhanfayaz said:
no phone charge
when power on it go itself in CWM
when i put my phone on charging it boot up in CWM itself
when i press VOLUME DOWN+HOME BUTTON+POWER BUTTON > to download mode it say LOOW BATTERY! can't download
i update 2 days before. LS8 update charging is 50% after that i am facing that problem ???? plzzz HELP 2 days go. i did not see my phone ON
I knw there is a solution just finding right one to solve my problem.
Click to expand...
Click to collapse
dont panic, remove the battery and put it back, dont power on. charge it for minimum 30 mins. then try to reflash the firmware using correct odin. after flashing you should have stock recovery. go in to stock recovery do factory reset and then restart the phone.
farhanfayaz said:
no phone charge
when power on it go itself in CWM
when i put my phone on charging it boot up in CWM itself
when i press VOLUME DOWN+HOME BUTTON+POWER BUTTON > to download mode it say LOOW BATTERY! can't download
i update 2 days before. LS8 update charging is 50% after that i am facing that problem ???? plzzz HELP 2 days go. i did not see my phone ON
I knw there is a solution just finding right one to solve my problem.
Click to expand...
Click to collapse
I really don't know what are you flashing, but flash this instead.
Unzip it and put it in PDA, press start.
problem solving thank you for your's time
kmaq said:
dont panic, remove the battery and put it back, dont power on. charge it for minimum 30 mins. then try to reflash the firmware using correct odin. after flashing you should have stock recovery. go in to stock recovery do factory reset and then restart the phone.
Click to expand...
Click to collapse
ok battery issue clear. but now
i did flash LS8 (SOURCE sammobile) flash it. when odin show PASS meesage i unplug my phone and POWER ON but phone does not ON. i put out my phone battery and reinsert it again. TRY TO POWER ON but failed. again put out battery reinsert. NOW it shows me samsung GT-I9100 AND SHOW ME ANDROID LOGO(stock recovery android logo) and after 5-6 second PHONE TURN OFF. put out battery reinsert then POWER ON it goes stock recovery itself.
AFTER go to stock recovery did WIPE DATA/FACTORY RESET after completed PRESS POWER BUTTON (REBOOT SYSTEM NOW) but PHONE DID NOT RESTART IT REMAIN OFFed.
PLEASE SEE MY ATTACHED PHOTO I PUT NUMBERS ON IT. STEP BY STEP PROCEDURE.
gastonw said:
I really don't know what are you flashing, but flash this instead.
Unzip it and put it in PDA, press start.
Click to expand...
Click to collapse
SIR, i think i am failed to clear my point to you. i did same again as you said but my phone does not REBOOT. IT REMAIN OFFED. BY PUT OUT BATTERY AND REINSERT IT THEN POWER ON IT GOES IN STOCK RECOVERY ITSELF.
my request to you please see my attached photo it will clear my point.
farhanfayaz said:
my request to you please see my attached photo it will clear my point.
Click to expand...
Click to collapse
I am looking at your pictures but it doesn't make any sense.
When Odin shows "Pass" the device should reboot itself and go straight to android, not recovery.
Hi everyone. I'm very disperate. My phone just got bricked ( I think ). I got bricked once but I unbricked it with odin and so on. In this evening, I throw my phone to the ground (No concret, just on my room carpet) and the battery just went out. I put back the battery but when I wanted to start the phone, it won't start. I press the start button but nothing. Then, I tried to enter in BIOS, but nothing. But, suprisely, the DOWNLOAD mode work and I tried to install the stock rom (I had a custom rom). It downloaded the rom in Odin, all worked perfet, till' it had to restart then, again, nothing. I'm disperate, my phone is DEAD? (
Cosmin1996 said:
Hi everyone. I'm very disperate. My phone just got bricked ( I think ). I got bricked once but I unbricked it with odin and so on. In this evening, I throw my phone to the ground (No concret, just on my room carpet) and the battery just went out. I put back the battery but when I wanted to start the phone, it won't start. I press the start button but nothing. Then, I tried to enter in BIOS, but nothing. But, suprisely, the DOWNLOAD mode work and I tried to install the stock rom (I had a custom rom). It downloaded the rom in Odin, all worked perfet, till' it had to restart then, again, nothing. I'm disperate, my phone is DEAD? (
Click to expand...
Click to collapse
No-one? I'm very disperate. I don't know what to do, please, anyone, help me.
Cosmin1996 said:
Hi everyone. I'm very disperate. My phone just got bricked ( I think ). I got bricked once but I unbricked it with odin and so on. In this evening, I throw my phone to the ground (No concret, just on my room carpet) and the battery just went out. I put back the battery but when I wanted to start the phone, it won't start. I press the start button but nothing. Then, I tried to enter in BIOS, but nothing. But, suprisely, the DOWNLOAD mode work and I tried to install the stock rom (I had a custom rom). It downloaded the rom in Odin, all worked perfet, till' it had to restart then, again, nothing. I'm disperate, my phone is DEAD? (
Click to expand...
Click to collapse
Try to get into recovery mod and do some wipes , then again flash the stock Rom !
Cosmin1996 said:
Hi everyone. I'm very disperate. My phone just got bricked ( I think ). I got bricked once but I unbricked it with odin and so on. In this evening, I throw my phone to the ground (No concret, just on my room carpet) and the battery just went out. I put back the battery but when I wanted to start the phone, it won't start. I press the start button but nothing. Then, I tried to enter in BIOS, but nothing. But, suprisely, the DOWNLOAD mode work and I tried to install the stock rom (I had a custom rom). It downloaded the rom in Odin, all worked perfet, till' it had to restart then, again, nothing. I'm disperate, my phone is DEAD? (
Click to expand...
Click to collapse
Hitesh2626 said:
Try to get into recovery mod and do some wipes , then again flash the stock Rom !
Click to expand...
Click to collapse
I can't get into recovery mod. Just into download mod and when I try to restart the phone, nothing happens.
Cosmin1996 said:
I can't get into recovery mod. Just into download mod and when I try to restart the phone, nothing happens.
Click to expand...
Click to collapse
Try to flash one more time , if works then good , then it might be HW issue .
Hitesh2626 said:
Try to flash one more time , if works then good , then it might be HW issue .
Click to expand...
Click to collapse
I tried again, but the same result
Cosmin1996 said:
I tried again, but the same result
Click to expand...
Click to collapse
Give it to service center.
Cosmin1996 said:
Hi everyone. I'm very disperate. My phone just got bricked ( I think ). I got bricked once but I unbricked it with odin and so on. In this evening, I throw my phone to the ground (No concret, just on my room carpet) and the battery just went out. I put back the battery but when I wanted to start the phone, it won't start. I press the start button but nothing. Then, I tried to enter in BIOS, but nothing. But, suprisely, the DOWNLOAD mode work and I tried to install the stock rom (I had a custom rom). It downloaded the rom in Odin, all worked perfet, till' it had to restart then, again, nothing. I'm disperate, my phone is DEAD? (
Click to expand...
Click to collapse
Gen in download mode and flush a stoke rom eith odin you can fing how to videos on youtube it's very eazy... you need only a pc with win xp or 7 and o usb cable.
manos_mand said:
Gen in download mode and flush a stoke rom eith odin you can fing how to videos on youtube it's very eazy... you need only a pc with win xp or 7 and o usb cable.
Click to expand...
Click to collapse
I did that. But, the problem is that when it restarts it won't turn on.
Use the repacked firmware.
Its like 's5830ixxla3_xxxx_xxxx_ato_repacked.zip'
It's the only one that worked for me when this happens
Sent from my GT-S5830i using xda app-developers app
LOL
first things first, why would you throw your device to the ground just because it was bricked ?? (specially if you know the it can still be revived) .. my s5830i bricks almost all day because i've been experimenting with it,
ok here's what you atta do,
1. download Samsung Galaxy Ace GT-S5830i Stock ROM on the net
2. Download Odin 1.84 (for some reason latest version can't detect Ace-i even under Odin Mode)
**NOTE: type in GOOGLE Odin for S58630i, with that you will get the .pit file or something with it ( lazy me )
3. Now boot your Ace-i to Odin Mode (Vol Up + Vol Down + Power)
4. FLASH ROM.
EDIT: i uploaded Odin3 v1.84 so that you don't have to download it anymore, here's what you have to do
of course, download Stock ROM first
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
xlSKYFiRElx said:
first things first, why would you throw your device to the ground just because it was bricked ?? (specially if you know the it can still be revived) .. my s5830i bricks almost all day because i've been experimenting with it,
ok here's what you atta do,
1. download Samsung Galaxy Ace GT-S5830i Stock ROM on the net
2. Download Odin 1.84 (for some reason latest version can't detect Ace-i even under Odin Mode)
**NOTE: type in GOOGLE Odin for S58630i, with that you will get the .pit file or something with it ( lazy me )
3. Now boot your Ace-i to Odin Mode (Vol Up + Vol Down + Power)
4. FLASH ROM.
EDIT: i uploaded Odin3 v1.84 so that you don't have to download it anymore, here's what you have to do
of course, download Stock ROM first
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
Click to expand...
Click to collapse
I tried man. I did every step you showed me, but when it has to restarts, it turns off and stays like that It won't turn on and I don't know why
Cosmin1996 said:
I tried man. I did every step you showed me, but when it has to restarts, it turns off and stays like that It won't turn on and I don't know why
Click to expand...
Click to collapse
Could be a hardware issue as Hitesh2626 suggested. Better take it to the Service Center
Cosmin1996 said:
I tried man. I did every step you showed me, but when it has to restarts, it turns off and stays like that It won't turn on and I don't know why
Click to expand...
Click to collapse
I think the battery has no power...charge it at first then again flash.
I just rooted my s4 and it shut down and when I turn it on it stays in the logo screen hours and hours. I did a factory reset and it still has this problem. Could it be bricked? Is there anything I can do? I'm in desperate help, thank you.
Zefues said:
I just rooted my s4 and it shut down and when I turn it on it stays in the logo screen hours and hours. I did a factory reset and it still has this problem. Could it be bricked? Is there anything I can do? I'm in desperate help, thank you.
Click to expand...
Click to collapse
Try to flash the stock ROM by getting into download mode.
tra_dax
tra_dax said:
Try to flash the stock ROM by getting into download mode.
tra_dax
Click to expand...
Click to collapse
How do I do that? I'm sorry I'm a noob to this
Zefues said:
How do I do that? I'm sorry I'm a noob to this
Click to expand...
Click to collapse
U need to download the stock firmware from sammobile. Then extract the .tar.md5 file on ur pc. Install Odin and Samsung drivers on ur PC. Get into download mode by holding power+ home+ volume down of ur phone. Then connect ur phone to PC. Open Odin. Load the .tar.md5 file in the AP/PDA section of odin. See that only f.time and auto reboot is ticked. Hit the start button. If u stuck anywhere then tell me.
tra_dax
tra_dax said:
U need to download the stock firmware from sammobile. Then extract the .tar.md5 file on ur pc. Install Odin and Samsung drivers on ur PC. Get into download mode by holding power+ home+ volume down of ur phone. Then connect ur phone to PC. Open Odin. Load the .tar.md5 file in the AP/PDA section of odin. See that only f.time and auto reboot is ticked. Hit the start button. If u stuck anywhere then tell me.
tra_dax
Click to expand...
Click to collapse
Hey, thanks for the reply. So far so good but I came across this problem I don't know how to fix. It says here that I need to have Auto Reboot checked off in Odin V3.07 but everything in the Odin option section is grey and uneditable. How do I tick Auto Reboot off? Thanks.
Zefues said:
Hey, thanks for the reply. So far so good but I came across this problem I don't know how to fix. It says here that I need to have Auto Reboot checked off in Odin V3.07 but everything in the Odin option section is grey and uneditable. How do I tick Auto Reboot off? Thanks.
Click to expand...
Click to collapse
Idk what's the problem, but let's try the latest version of Odin.
tra_dax