[Q] Genymotion stuck on Android boot screen. - Android Q&A, Help & Troubleshooting

Hello everyone! I'm a total noob here, and sorry if I posted in the wrong section!
OK, one day I was able to open a Genymotion device, but later that day I wasn't. Reason?
When I opened a terminal (using CrunchBang Waldorf) and ran Genymotion, it would work fine, but then when I booted a Samsung Galaxy S4 4.3 , it would bring up the device fine, but it would get stuck on that "Android" screen, with the light going across.
I waited for a few hours, only to come back to the same message. I would open up the .Genymobile/genymotion-player.log using cat in terminal. The results?
[Genymotion Player] [Debug] Output command: "0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%"
At the end, not very helpful to me. So I tried running it through VirtualBox, giving me "untracked pid exited ____" with a number 100+ in the ____.
I'm totally confused, because other devices work fine, including SGS4 4.2.2, but SGS4 4.3 doesn't work. Please help, and please explain in noob language, I'm not very proficient with this! :laugh:

Anyone?

Bump...

Anyone know a solution?

I really want this fixed! Does anyone know anything to fix this?

It seems by bumping this thread, I only get views, not replies.

It seems that other questions are mostly being answered, however mine is ignored. At least ask for more details if that's the problem!

Sitting in silence doesn't do any good to anyone.

I'm really about to give up on this forum, it's driving me nuts how nobody seems to care enough to even ask a question for more details.

zipperklooder said:
Hello everyone! I'm a total noob here, and sorry if I posted in the wrong section!
OK, one day I was able to open a Genymotion device, but later that day I wasn't. Reason?
When I opened a terminal (using CrunchBang Waldorf) and ran Genymotion, it would work fine, but then when I booted a Samsung Galaxy S4 4.3 , it would bring up the device fine, but it would get stuck on that "Android" screen, with the light going across.
I waited for a few hours, only to come back to the same message. I would open up the .Genymobile/genymotion-player.log using cat in terminal. The results?
[Genymotion Player] [Debug] Output command: "0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%"
At the end, not very helpful to me. So I tried running it through VirtualBox, giving me "untracked pid exited ____" with a number 100+ in the ____.
I'm totally confused, because other devices work fine, including SGS4 4.2.2, but SGS4 4.3 doesn't work. Please help, and please explain in noob language, I'm not very proficient with this! :laugh:
Click to expand...
Click to collapse
I have never used genymotion .... But all ask this question... Do you have to have sdk manager installed to use it? If so, is it up to date? Make sure you have the latest version of everything. Sounds like it's 4.3 that's not working so maybe that's it. (I'm guessing)
http://imgur.com/vYFZrIr.jpg

JrSmilez said:
I have never used genymotion .... But all ask this question... Do you have to have sdk manager installed to use it? If so, is it up to date? Make sure you have the latest version of everything. Sounds like it's 4.3 that's not working so maybe that's it. (I'm guessing)
http://imgur.com/vYFZrIr.jpg
Click to expand...
Click to collapse
Thank you for the reply. It was not specified to have SDK Manager installed. I have tried installing the latest version of Genymotion, but because Debian doesn't have the required version of (e)glibc, I'm unable to install it. The odd thing is that it stopped working abruptly, with no change on my part .

zipperklooder said:
Thank you for the reply. It was not specified to have SDK Manager installed. I have tried installing the latest version of Genymotion, but because Debian doesn't have the required version of (e)glibc, I'm unable to install it. The odd thing is that it stopped working abruptly, with no change on my part .
Click to expand...
Click to collapse
Not sure what to tell you. Maybe when I get home I'll download it and try it out myself.
http://imgur.com/vYFZrIr.jpg

Did you try installing it?

zipperklooder said:
Did you try installing it?
Click to expand...
Click to collapse
I was able to install it and run a 4.3 emulator on my computer. Last night was the 1st chance I've had to mess with it though. I'm on windows7 though so I don't know if that makes a difference.
http://imgur.com/vYFZrIr.jpg

Bump, and it probably does make a difference.

BUMP!

Just curious, do you just open Genymotion, or do you open something that came with it? I believe it came with Genymotion shell and Oracle vm virtual box. I only open Genymotion and I have no trouble.
Sent from my LG-LS980 using Tapatalk

Might be a bit late in responding.
Is virtualization enabled from BIOS, otherwise CPU would be forced to 1 core only and would take long time to load, I had this issue however, playing a bit with the RAm (lowering it ) sorted the problem.
with 1 core the Emulator becomes slow.

Did you try to check the logcat? It should say something.
Also Genymotion using OpenGL, so there might be some problems with your video card

Related

3 UK root?

Hey Xda-developers. Just quickly, I found this Forum from a few links on other websites (gizmodo, engadget) and some youtube videos of your awesome custom ROMs.
I for my HTC Hero in March, and I should be upgrading around christmas 2011. That's a while, and Android grows fast..much much faster than HTC update my device, so I'm thinking a custom ROM is what I really want.
I've done my research, but honestly I'm pretty much a noob here. I know I need to root the phone, but I've been unable to find any specific instructions for 3 UK, and as far as I can tell all the different carriers use different instructions (a different ROM to downgrade to?), so I don't want to use the wrong ones.
-
Phone Spec
Okay, this is a standard HTC Hero on a 24 month contract carried by 3 UK.
There has been no rooting, no major changes. I have done no more than officially supported. A complete from scratch root would be required.
Currently running 1.5.
UK, 3 Mobile, GSM.
No hardware replacements and no known issues with the phone.
-
I think that's about all, is somebody here able to point me to the right place for a 3 mobile root?
Thanks in Advance,
Callum.
I'm also on 3uk and i rooted my phone using the following guide:
http://androidforums.com/all-things-root-hero/54802-how-root-install-custom-rom-backup-more.html
Hope this helps.
Thankyou very much for your help! I'll be giving that guide a go later.
No probably m8, SenseHERO is a good custom ROM.
Any trouble just post up and ill try and help you out.
Hmm, if I could ask you to take a look at a post, that'd be really helpful. No worries if you don't have a clue though.
Hero, G2 Touch Android Development >
[Guide] Complete Newbie Guide to Install a Custom Rom & Newbie FaQ [Updated 02/05] >
Page 33, Post 1.
Sorry that link is so bad, but they won't let me post a proper one.
That thread was alternative 2 for the 3uk guide you gave me (goldcard section). I'm not sure whether you'll be able to help me, but if you could take a look that'd be massively helpful.
Cheers,
Callum.
I posted a reply to more or less the same problem earlier.
http://forum.xda-developers.com/showpost.php?p=6701261&postcount=268
Let me know how you get on.
Thankyou very much for your reply, but I have already done all of this. I've successfully performed a goldcard on my SD and I'm really close to getting a working custom ROM, but it's dying somewhere there. I have already installed the x64 drivers though.
HTC Sync works perfectly, picking up the phone and synchronizing on demand.
Thanks,
Callum.
What guide are you using, i used this was one to create a goldcard and downgrade:
http://forum.xda-developers.com/showpost.php?p=5855697&postcount=1
The only problem i had was syncing after installing the latest version. I fixed it by downloading a driver manager and updated the drivers for it.
I take it it lets you mount the SD card on your computer?
One thing that might be worth a try is to download the ROM again, it might be corrupt, a shot in the dark but worth a go.
That's the guide I ended up at, after following a link within the guide you provided above.
It does indeed allow me to mount the SD card, everything syncs perfectly. I'll give re-downloading the ROM a go, though. There was two available, so I'll try the other download.
Hmm, I've tried everything I can think of, and nothing is working on this Windows 7 machine. My brother's XP machine is broken, and my dad's away with the XP notebook.
Is there any way that anybody knows of to run XP as a virtual machine temporarily?
Here's a link for a virtual box:
http://www.virtualbox.org/wiki/VirtualBox
I dont know how to run it though.
Someone had a similar problem on win7 yesterday and sorted it by getting a new gold card. Might be worth a try?
Aha, I re-downloaded goldcard, and switched the driver to My HTC once with it normally plugged in, then with bootloader open. And it downgraded!
I've got the Scenehero on the SD card now, I'm just unable to launch the custom recovery screen. It will start normally by hitting power, but while the home button is also held it just loops the first hero screen. Is there any way past that, because I need to perform a wipe and flash scenehero.
Thanks so much for your help so far, you've been amazing!
If your all set up properley you should be able to connect your phone via usb to the PC,
then open a command window and type>"adb shell devices"
your phone should show in the window something like HTLK12345
now type> "adb shell reboot recovery"
this should boot your phone into recovery mode.
Hope this helps.
Thankyou very much for your help, I solved the problem by re-installing my recovery. Not sure what went wrong but it worked after that. All looks good now!
good stuff m8, glad your sorted.
what rom are you running?
I'm currently using the latest version of Sensehero. Really pleased with it so far.
I'm on branch 3, waiting for branch 5, should be here soon hopefully.
If you have'nt already m8 check out the site:
http://www.htcdevscene.co.uk/
Some top lads over there having a good time!!.

Dual Booting - Ubuntu/Debian and Android

Hey All
I have a requirement for setting up a dual boot on the HTC Hero using the SD Card for the 2nd OS.
I've looked around and have come across the Dual Booting for the Windows Mobile and Android on the HTC HD2 and was hoping somebody might be able to point me in the right direction archiving this on an Hero.
I'm not looking to run both OS at the same time, ie not running Ubuntu/Debian via a loop device.
So if anyone knows of any good guides for editing the Boot.img, i thinking that where the magic gonna happen, i might be wrong, please i would very much like to hear from you.
Many Thanks
c0mput3
ubuntu in its present form simply will not run. cmd based linux is a possibility for many mobile devices, as has been prooved by cmd linux on iphone os.
I wouldnt know about how to go about this though.
Speak to kendon over on Villainrom forums.I think hes probably the one to talk to as im sure he said ubuntu is possible
Many thanks Bonesy, checking that now. =)
Status?
... and what was the end result?
There is a thread on the villianrom forum for running ubuntu/debian alongside android though I'm still waiting for a new SD card before I try it. I would link but its still down, any ETAs for it being back up yet, I understand it might take a while?

[Q] Frustrated, bricked - Hipstreet Titan-A

Hi
I've looked around the XDA Forums, and on various other forums. I have a Hipstreet Titan, I tried to root using the Tasselhof's Root package, and it went reasonably well until I selected the option (#3) to copy over the build.prop file. After that I get the Android logo every boot-up. Factory wipe I guess wiped - I don't really have any way to verify. I pushed a different build.prop on, but that didn't seem to take (or make any difference). For some reason my adb shell (whateverother parms) doesn't work. It returns "- exec '/system/bin/sh' failed: No such file or directory (2) -". So I figure the OS has been toasted. (I didn't have this much trouble rooting my LG Eclypse. )
Now, I just need to find an original ROM, or some other slightly modded (rooted would be nice) ROM to get on to my device before I find out how far out my back door I can throw this thing. As this Hipstreet tablet is an off brand (really far off, but hey, I got it free), I haven't been able to find a ROM posted anywhere. Likely I just haven't looked in the right spot yet. Yes, I know, I should have backed up first - but I didn't. As soon as I get an OS working on this, I'll back it up - promise.
I've also tried "adb sideload system.img" using a system image file that comes with the Android ADT kit and the factory recovery mode. That appears to upload the file, reboot the device then report (on the windows terminal) "* failed to write data 'protocol fault (no status)' *". The device reboots into the recovery system screen.
So, if someone would be so kind as to point me to a rom file that will work on this device, it would be most appreciated.
PS this is the Titan rev A, when I got the device (second hand) the Google Play store functioned just fine. The person I got it from is not a techy, so I doubt they applied any root or update to it, so I'm guessing it came already set up.
Ok, let me rephrase simply.
Can someone with a working Hipstreet Titan, rooted or not, please send me, or post a link to their ROM?
Click to expand...
Click to collapse
I know people have this device, and it's quite reasonable to assume that not all of them are bricked, therefore this request is technically feasible. Further, with a number of people posting about this device in technical forums, I know people with technical knowledge own this device.
I would really hate to throw out an otherwise perfectly good tablet.
Jarod997 said:
I would really hate to throw out an otherwise perfectly good tablet.
Click to expand...
Click to collapse
Hi - did you ever resolve this issue?
beach9000 said:
Hi - did you ever resolve this issue?
Click to expand...
Click to collapse
Not yet. I had given up for a while. Most of my internet searches kept coming back to the same few articles on this website.
I have a lead on someone who has another Titan, but they live seven hours away - it's been difficult coordinating a meeting.
Jarod997 said:
Hi
I've looked around the XDA Forums, and on various other forums. I have a Hipstreet Titan, I tried to root using the Tasselhof's Root package, and it went reasonably well until I selected the option (#3) to copy over the build.prop file. After that I get the Android logo every boot-up. Factory wipe I guess wiped - I don't really have any way to verify. I pushed a different build.prop on, but that didn't seem to take (or make any difference). For some reason my adb shell (whateverother parms) doesn't work. It returns "- exec '/system/bin/sh' failed: No such file or directory (2) -". So I figure the OS has been toasted. (I didn't have this much trouble rooting my LG Eclypse. )
Now, I just need to find an original ROM, or some other slightly modded (rooted would be nice) ROM to get on to my device before I find out how far out my back door I can throw this thing. As this Hipstreet tablet is an off brand (really far off, but hey, I got it free), I haven't been able to find a ROM posted anywhere. Likely I just haven't looked in the right spot yet. Yes, I know, I should have backed up first - but I didn't. As soon as I get an OS working on this, I'll back it up - promise.
I've also tried "adb sideload system.img" using a system image file that comes with the Android ADT kit and the factory recovery mode. That appears to upload the file, reboot the device then report (on the windows terminal) "* failed to write data 'protocol fault (no status)' *". The device reboots into the recovery system screen.
So, if someone would be so kind as to point me to a rom file that will work on this device, it would be most appreciated.
PS this is the Titan rev A, when I got the device (second hand) the Google Play store functioned just fine. The person I got it from is not a techy, so I doubt they applied any root or update to it, so I'm guessing it came already set up.
Click to expand...
Click to collapse
It looks like they made a few different versions of the tablet and it matters also about how much storage as to which firmware you should try. The person here: http://www.androidtablets.net/forum...eet-titan-a13-7-inch-tab-firmware-needed.html was able to load the firmware from another device that was similar. There were some major issues, but better to get it running first and sort that out later I guess. But his link has a bunch of other a13 tablet firmwares. If that is the same as yours, possibly one of them will be enough to boot up.
es0tericcha0s said:
It looks like they made a few different versions of the tablet and it matters also about how much storage as to which firmware you should try. The person here: (link manually removed) was able to load the firmware from another device that was similar. There were some major issues, but better to get it running first and sort that out later I guess. But his link has a bunch of other a13 tablet firmwares. If that is the same as yours, possibly one of them will be enough to boot up.
Click to expand...
Click to collapse
Thanks for the help! I'll have a look at some of those. I'd really like to have a tablet back that doesn't have a 3.5" screen.
So I managed to get LiveSuit 1.11 installed on Win 8-64, yes it IS doable. But, my problem is I can't get the tablet recognized. The Power+Vol boot takes it in to "recovery" mode, (so reports "adb devices") - does this keep it from being able to be used by LiveSuit?
"adb wait-for-device" hangs
In my Device Manager I have Android Device->Android ADB Interface, and Universal Serial Bus controllers->USB Device(VID_1f3a_PID_efe8) with a yellow exclamation.
I know I had "adb wait-for-device" passing fine at one point, but I don't remember what I had to do to get there. So much trouble for a free tablet.
I have a Titan that I unfortunately tried to root using what would only work on the ICS model and it's the JB model. It bootloops on the Android boot sequence. I can adb into the tablet and browse it, and I can see in the logcat where it gives up and restarts.
I saw the post on that other forum about using the Tragidy firmware but that file at Dorkfiles now appears to be paywalled. If anyone has that or another compatible firmware already downloaded and would be able to share, that would be wonderful.
At this point the Titan in front of me may as well be a mini cutting board or a large coaster. Not that it matters much, as some store gave it out to my parents for free and we all own better devices. It's just that they don't own any Androids and I thought I could configure this one as an easy remote for them to push content from their media server to their Smart TV instead of using the TV's complicated interface.
cmstlist said:
I have a Titan that I unfortunately tried to root using what would only work on the ICS model and it's the JB model. It bootloops on the Android boot sequence. I can adb into the tablet and browse it, and I can see in the logcat where it gives up and restarts.
I saw the post on that other forum about using the Tragidy firmware but that file at Dorkfiles now appears to be paywalled. If anyone has that or another compatible firmware already downloaded and would be able to share, that would be wonderful.
At this point the Titan in front of me may as well be a mini cutting board or a large coaster. Not that it matters much, as some store gave it out to my parents for free and we all own better devices. It's just that they don't own any Androids and I thought I could configure this one as an easy remote for them to push content from their media server to their Smart TV instead of using the TV's complicated interface.
Click to expand...
Click to collapse
So I managed to get a system backup off of my father-in-law's Titan - just have to figure out how to get it on my brick. I'm having great difficulty trying to do a restore while in recovery mode.
What means did you use to back it up?
Sent from my Nexus 5 using Tapatalk
cmstlist said:
What means did you use to back it up?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
adb backup
Jarod997 said:
adb backup
Click to expand...
Click to collapse
The adb backup command doesn't back up the system files. Unless there's some other way to use it that I'm not aware of?
Sent from my Nexus 7 using Tapatalk
cmstlist said:
The adb backup command doesn't back up the system files. Unless there's some other way to use it that I'm not aware of?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Aw crap, really? The cutting board a-la-iPad commercial is sounding like such a good idea at the moment.
On the good tablet I could get in the shell - "adb shell", and then "su", but then what? How do you copy all the files off the system through the USB onto the computer from the shell? For whatever reason (and I dislike ADB for this) I could not do "adb pull /* /destination-folder/*" - it kept saying that it was skipping a lot of files. Or otherwise if I was trying other variations on commands and parameters, adb would just spew its help page - never mind telling me what's wrong with the command I just entered.
Why, oh why, is it so hard to take a copy of a good working OS and put it on to another tablet?
But, make you a deal - help me get a good system image off this working tablet and I'll toss it to ya.
If you can find the right mount points on the partition table got may be able to make a system dump using dd. But restoring it I have no idea since there's no custom recovery available for this tablet.
Sent from my Nexus 7 using Tapatalk

[Q] Android on an iPhone

OK, this is possibly the weirdest question I'm ever going to ask but let's get to it. Yes this relates to an iPhone but it is primarily an issue with the fact that it has a strange version of android on it and I don't know where else to ask this question. I've checked, it is not a weird version of iOS, it is a fully fledged version of android that just draws resources i.e. pictures, thumbnails, status bar, etc from the iPhone. I'll start with some background information.
OK, so my friend bought this iPhone 4s from another friend whose brother had completely screwed up the phone by modding it with a Chinese/Japanese modified android. My friend thought he could fix it but apparently not so he asked me to fix it for him. I check the settings and the version of android is V2G.12.03.12, I googled it and it came up with a Chinese/Japanese forum for modding iPhones with android, at least that's what it looked like. This mod has removed iPhone DFU and recovery mode, iTunes can no longer interface with the device and the home button now functions as a back button, the app store has been replaced with google play and the apps on the device are android apps, some of them are in Chinese/Japanese which I can't read so I just avoid them. My friend wants me to get rid of whatever version of android this is and replace it with iOS 7.
What I've done so far
Alright, as soon as I got the phone, I thought I should try DFU mode which is like an extreme recovery mode where you can flash different versions of iOS using iTunes but after trying a few times to enter DFU mode, I quickly realised it didn't exist on this phone anymore lol. So I digging in the settings of the device where I figured out that it wasn't just some modified version of iOS that emulates android, I found out that the android version was called V2G.12.03.12 and so I googled it. This was a fruitless exercise as all the results were in a language I can't comprehend. Then I thought why not try and enter recovery mode (android version) but didn't know how that would work with an iPhone so I installed ROM Toolbox Pro which is how I realised that this device wasn't rooted. Soo, since I didn't know how I was going to root it without recovery mode, I thought I'd try some 1-click root methods. I installed Kingo Android ROOT which seemed to be working at first, it was installing the device driver and then I dropped it while attempting to leave my room and when I came back it told me there was no device connected which was a major pain in the arse. However I concluded that the device driver was successfully installed as my computer was now able to enter the internal storage of the iPhone but iTunes still doesn't detect the device. This lead me to believe that the device can't be rooted because of an issue with the android version. So, after discovering this I thought I'd try ABD to try to boot into recover mode but since I've never had to use it before, I have to download it and apparently it comes with the Android SDK bundle. So I was downloading it when all of a sudden, when it reached 479/480 mb, it told me there was a network error, so I thought alright... let's try this again but alas, everything I try to download from that website gives me a network error right before the download is completed.
So at this point, I'm completely at a loss as to what I should do now, I need to find a way to root the device and to enter recovery mode so I can see what I can do in terms of some how flashing iOS 7 on the device. Please help me lol, there is £10 at stake here so help please :laugh:! And a reputation to upkeep . Thanks for any help that can be given. If this question is in the wrong place please help me move it, if this question is not appropriate for this forum could someone direct me to an appropriate forum to ask this on lol.
BUMP
Elite Choob said:
OK, this is possibly the weirdest question I'm ever going to ask but let's get to it. Yes this relates to an iPhone but it is primarily an issue with the fact that it has a strange version of android on it and I don't know where else to ask this question. I've checked, it is not a weird version of iOS, it is a fully fledged version of android that just draws resources i.e. pictures, thumbnails, status bar, etc from the iPhone. I'll start with some background information.
OK, so my friend bought this iPhone 4s from another friend whose brother had completely screwed up the phone by modding it with a Chinese/Japanese modified android. My friend thought he could fix it but apparently not so he asked me to fix it for him. I check the settings and the version of android is V2G.12.03.12, I googled it and it came up with a Chinese/Japanese forum for modding iPhones with android, at least that's what it looked like. This mod has removed iPhone DFU and recovery mode, iTunes can no longer interface with the device and the home button now functions as a back button, the app store has been replaced with google play and the apps on the device are android apps, some of them are in Chinese/Japanese which I can't read so I just avoid them. My friend wants me to get rid of whatever version of android this is and replace it with iOS 7.
What I've done so far
Alright, as soon as I got the phone, I thought I should try DFU mode which is like an extreme recovery mode where you can flash different versions of iOS using iTunes but after trying a few times to enter DFU mode, I quickly realised it didn't exist on this phone anymore lol. So I digging in the settings of the device where I figured out that it wasn't just some modified version of iOS that emulates android, I found out that the android version was called V2G.12.03.12 and so I googled it. This was a fruitless exercise as all the results were in a language I can't comprehend. Then I thought why not try and enter recovery mode (android version) but didn't know how that would work with an iPhone so I installed ROM Toolbox Pro which is how I realised that this device wasn't rooted. Soo, since I didn't know how I was going to root it without recovery mode, I thought I'd try some 1-click root methods. I installed Kingo Android ROOT which seemed to be working at first, it was installing the device driver and then I dropped it while attempting to leave my room and when I came back it told me there was no device connected which was a major pain in the arse. However I concluded that the device driver was successfully installed as my computer was now able to enter the internal storage of the iPhone but iTunes still doesn't detect the device. This lead me to believe that the device can't be rooted because of an issue with the android version. So, after discovering this I thought I'd try ABD to try to boot into recover mode but since I've never had to use it before, I have to download it and apparently it comes with the Android SDK bundle. So I was downloading it when all of a sudden, when it reached 479/480 mb, it told me there was a network error, so I thought alright... let's try this again but alas, everything I try to download from that website gives me a network error right before the download is completed.
So at this point, I'm completely at a loss as to what I should do now, I need to find a way to root the device and to enter recovery mode so I can see what I can do in terms of some how flashing iOS 7 on the device. Please help me lol, there is £10 at stake here so help please :laugh:! And a reputation to upkeep . Thanks for any help that can be given. If this question is in the wrong place please help me move it, if this question is not appropriate for this forum could someone direct me to an appropriate forum to ask this on lol.
Click to expand...
Click to collapse
Have you tried consulting Google on how to reinstall DFU? I heard it is inside the .ipsw file but I'm not sure about how to put it on your device.
Also, try Google Translate for the websites.
Beamed from my Galaxy Express using Tapatalk
aureljared said:
Have you tried consulting Google on how to reinstall DFU? I heard it is inside the .ipsw file but I'm not sure about how to put it on your device.
Also, try Google Translate for the websites.
Beamed from my Galaxy Express using Tapatalk
Click to expand...
Click to collapse
Ah, thank you. I wasn't aware you could reinstall DFU, googling it right now. I'll see how it goes in terms of getting it on the device. Thanks
BUMP, I couldn't find any way to reinstall DFU however I found iOS 7.0.4 for the iPhone 4s but I'm not sure how I'm going to install it without being jailbroken or without DFU mode/iTunes. Help please.
BUMP
Elite Choob said:
BUMP
Click to expand...
Click to collapse
Quick FIX just buy a new iPhone or keep android on it. No fix for it. Sorry
idle0095 said:
Quick FIX just buy a new iPhone or keep android on it. No fix for it. Sorry
Click to expand...
Click to collapse
Uh, uh, if it was possible for this to be done, it must be possible to reverse it, I'm going to keep trying and it's not my iPhone, it belongs to a friend so I can't just buy a new one lol. And the android isn't in English, no point in keeping it.
BUMP
BUMP
#BUMP
"
Elite Choob said:
#BUMP
Click to expand...
Click to collapse
'

manual installation limitations

hello all
hope you're well during this difficult period
i have an android box called "t8-aml-v3"
the development for the device stopped shortly after i purchased it so its been stuck on 4.4.2 for a long time, it was fine but now all these new apps like netflix bein sports having issues with old software,
what I want to know is, is there any way i can flash the device to install just basic stock android the way we can do for any device such as a memory stick,
when i go into recovery mode etc and reset it it doesnt wipe it just factory reset, i even tried installing a rom using clockwork lol it goes through the process but when it reboots its just normal box
could someone please point me in the right direction?
@asustf700t
To get your question answered, if possible, run the Compatibility Test Suite (CTS) what is a free, commercial-grade test suite, available for download here. The CTS runs on a desktop machine and executes test cases directly on attached devices .
jwoegerbauer said:
@asustf700t
To get your question answered, if possible, run the Compatibility Test Suite (CTS) what is a free, commercial-grade test suite, available for download here. The CTS runs on a desktop machine and executes test cases directly on attached devices .
Click to expand...
Click to collapse
hello my friend
i see, okay thank you, i will do now and revert shortly, thanks!
edit -
i havent got a double sided type A so have ordered one from amazon, will let you know once it arrives and i am able to run the test,
cheers
jwoegerbauer said:
@asustf700t
To get your question answered, if possible, run the Compatibility Test Suite (CTS) what is a free, commercial-grade test suite, available for download here. The CTS runs on a desktop machine and executes test cases directly on attached devices .
Click to expand...
Click to collapse
Helllo
The cable arrived today and I downloaded the cts, it asked in the instructions to also install Android studio which I've done, but now I really don't know what to, I went to the install instructions in the website and here
https://source.android.com/compatibility/cts/setup
But I found it rather overwhelming, could you possibly simplify or point me to the exact instruction I need to follow?
I've installed android studio and downloaded/extracted the appropriate CTS version for my device..
Thank you
asustf700t said:
Helllo
...
But I found it rather overwhelming, could you possibly simplify or point me to the exact instruction I need to follow?
I've installed android studio and downloaded/extracted the appropriate CTS version for my device..
Thank you
Click to expand...
Click to collapse
Don't have the time to do so, sorry for this.
BTW: Wondering why you installed Android Studio: CTS works on device you connect to via USB.
jwoegerbauer said:
Don't have the time to do so, sorry for this.
BTW: Wondering why you installed Android Studio: CTS works on device you connect to via USB.
Click to expand...
Click to collapse
hello, ok thanks for your reply
it is because on the instructions I read i needed to use a linux PC to run a command to execute the cts and run it on my adroid device plugged in, i presume now that this isn't necessary lol,
i just need some clarity
Could anyone else possibly let me know

Categories

Resources