My question is how to get into flashmode when formated system? So please help all I have a problem. Yesterday I just took my XP and turned it into CWM. Then i went into mounts and storage and accidentaly formated the system, then i got scared and rebooted my phone. Now it just boots and hangs on Sony logo. I tried hard reset by holding volume up +power for 10sec until phone vibrates 3 times. Then i tired to go into flashmode but when i connect it to pc green led shows out and after 2 or 3 sec. red light shows out and it just boots again into Sony logo. Please help somebody I just need to get into flashmode and then i can flash .tft with Flashtool. My phone is from O2 carrier (but unlocked all sim cards work) bootloader is locked. Please I really need help . Everybody who 'll help for me i'll say thanks
P.S Sorry for my bad English
First flash a custom rom
your's,
ajeteja.
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
By formatting system.means deleting os u cant get paat the sony logo
your's,
ajeteja.
ajeteja said:
First flash a custom rom
your's,
ajeteja.
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
By formatting system.means deleting os u cant get paat the sony logo
your's,
ajeteja.
Click to expand...
Click to collapse
Yeah I know but when I formated system from CWM I can't get into CWM anymore.
tauriuxx said:
Yeah I know but when I formated system from CWM I can't get into CWM anymore.
Click to expand...
Click to collapse
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
carlaba2 said:
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
Click to expand...
Click to collapse
It will be all good if I will be able to get into flashmode. But i Can't get into flash mode. I wrote that when i hold volume down and connect phone to pc green led comes out(computer won't detect it) and after few sec. red led comes out and then phone just boots again into sony logo I have SEUS and PC Companion on my pc but these don't work because computer won't detect my phone.
P.S I've tired this method on Windows 7 and windows xp but they both didn't work
tauriuxx said:
It will be all good if I will be able to get into flashmode. But i Can't get into flash mode. I wrote that when i hold volume down and connect phone to pc green led comes out(computer won't detect it) and after few sec. red led comes out and then phone just boots again into sony logo I have SEUS and PC Companion on my pc but these don't work because computer won't detect my phone.
Click to expand...
Click to collapse
Have you installed drivers correctly? What operative system do you have in your computer?
If you have not, go to C:/flashtool/drivers and intall them (you have to check your device and 2 last options in the installer (fastboot and flashmode)
carlaba2 said:
Have you installed drivers correctly? What operative system do you have in your computer?
If you have not, go to C:/flashtool/drivers and intall them (you have to check your device and 2 last options in the installer (fastboot and flashmode)
Click to expand...
Click to collapse
Yes my drivers are installed correctly, the flashmode worked before when i flashed stock tft. After flashing stock tft i installed a custom rom, then i went into cwm and accidentaly formated the system. I have Windows 7 x64 on my pc.
tauriuxx said:
Yes my drivers are installed correctly, the flashmode worked before when i flashed stock tft. After flashing stock tft i installed a custom rom, then i went into cwm and accidentaly formated the system. I have Windows 7 x64 on my pc.
Click to expand...
Click to collapse
I'm sorry that's all my knowledge for now, hope someone else in here can help you with this. If I were you, I'd try installing flashtool and drivers from scratch on another PC.
carlaba2 said:
I'm sorry that's all my knowledge for now, hope someone else in here can help you with this. If I were you, I'd try installing flashtool and drivers from scratch on another PC.
Click to expand...
Click to collapse
Whatever Anyway thanks for help. I'm going to leave my phone turned on all night so it will totaly discharge and then i will try to charge it and put into flashmode. Maybe this will work. I'll post the results if i'll fix my xp.
Phone is working!
When i tried discharging phone, that didn't help so i gave my phone to my friends dad because he is a good phone technican, and fixer. So what he did? That was akward moment :laugh:
1. When he conected phone to his pc (win xp) the computer detected my phone (my computer wasn't able to detect)
2. Then he just flashed some files. But not with Flashtool. He used program called SE2tools or something like that.
3. The phone booted up and now is working sucessfully
tauriuxx said:
When i tried discharging phone, that didn't help so i gave my phone to my friends dad because he is a good phone technican, and fixer. So what he did? That was akward moment :laugh:
1. When he conected phone to his pc (win xp) the computer detected my phone (my computer wasn't able to detect)
2. Then he just flashed some files. But not with Flashtool. He used program called SE2tools or something like that.
3. The phone booted up and now is working sucessfully
Click to expand...
Click to collapse
I think it was a driver problem after all. Next time if you have this problem again, even if you have already installed the drivers, try uninstalling and installing again... Windows is crazy , especially win8 which I'm hating more everyday lol
carlaba2 said:
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
Click to expand...
Click to collapse
Hi,
I also committed the same mistake. Experiencing the same issue.
Please give a link to download the Stock ICS rom for Xperia Sola and Flashtool & its driver, so I can try your steps and make my phone work.
Thanks,
Irfan
saeedirfaan said:
Hi,
I also committed the same mistake. Experiencing the same issue.
Please give a link to download the Stock ICS rom for Xperia Sola and Flashtool & its driver, so I can try your steps and make my phone work.
Thanks,
Irfan
Click to expand...
Click to collapse
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Sola got stuck at Sony Boot Logo
ChikeD said:
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime.
---------- Post added at 06:36 PM ---------- Previous post was at 06:24 PM ----------
ChikeD said:
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Installed Flashtool version 0.9.13.0 - Windows in 'C' drive. In that, installed Xperia Sola, Flashmode, Fastboot mode drivers. Drained all the charge and my phone was switched off. Launched the Flashtool, connected my switched off device to PC through USB holding the Volume Up key, and followed the steps (Click 1 to Click 8) as mentioned in the below link:
http://forum.xda-developers.com/showthread.php?t=1963961
When I did Click 4, I got an error in the Flashtool saying, This action needs a connected device in ADB mode.
When I did Click 5, I got an error in the Flashtool saying, This action can only be done in fastboot mode.
When I hold Volume Up/Down key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, and neither to Flashmode. Please help!
Thanks.
saeedirfaan said:
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime.
---------- Post added at 06:36 PM ---------- Previous post was at 06:24 PM ----------
Installed Flashtool version 0.9.13.0 - Windows in 'C' drive. In that, installed Xperia Sola, Flashmode, Fastboot mode drivers. Drained all the charge and my phone was switched off. Launched the Flashtool, connected my switched off device to PC through USB holding the Volume Up key, and followed the steps (Click 1 to Click 8) as mentioned in the below link:
http://forum.xda-developers.com/showthread.php?t=1963961
When I did Click 4, I got an error in the Flashtool saying, This action needs a connected device in ADB mode.
When I did Click 5, I got an error in the Flashtool saying, This action can only be done in fastboot mode.
When I hold Volume Up/Down key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, and neither to Flashmode. Please help!
Thanks.
Click to expand...
Click to collapse
Dude your a bit confused.
The only thing you may need flashtoo is first step (Flash boot.img from .zip via Fastboot ) all the rest is done in CWM recovery.
I don't know who told you to drain your baterry, but do not ever flash anything with baterry less than 50 percent, prefferrably fully charged.
Flash stock first, copy the zip to your SD card, then follow steps 1-9+.
For step 1 you need to extract boot.img from the rom zip on your pc.
To enter CWM recovery (after you flashed the boot.img), while device is booting (Sony LOGO) press volume down every second or so untill you are in CWM.
To nevigate in CWM, select - home key or power, move down - volume down or menu key, move up - volume up, exit/return to previous menu - back key or select at the bottom of the menu.
Stuck at Sony logo!
ChikeD said:
Dude your a bit confused.
The only thing you may need flashtoo is first step (Flash boot.img from .zip via Fastboot ) all the rest is done in CWM recovery.
I don't know who told you to drain your baterry, but do not ever flash anything with baterry less than 50 percent, prefferrably fully charged.
Flash stock first, copy the zip to your SD card, then follow steps 1-9+.
For step 1 you need to extract boot.img from the rom zip on your pc.
To enter CWM recovery (after you flashed the boot.img), while device is booting (Sony LOGO) press volume down every second or so untill you are in CWM.
To nevigate in CWM, select - home key or power, move down - volume down or menu key, move up - volume up, exit/return to previous menu - back key or select at the bottom of the menu.
Click to expand...
Click to collapse
No No bro listen, I did a mistake while installing the Custom ROM.
I forgot to flash the boot.img and did full wipe even formatted the system. Rebooted the system without installing the ROM. Now, stuck at Sony Logo. (NOTE: During this I had the battery charged full)
To rectify the above issue, I tried to flash the boot.img through fastboot mode in Flashtool and install the Custom ROM through CWM. To connect to flashtool, the device should be switched off. Now, I cant switch off. I can only restart. Hence, I drained the battery completely and tried to connect to Flashtool. When I hold Volume Up key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, also when holding Volume Down key and connect to PC through USB, only red LED lights up. It is not connecting to Flashmode.
Please help!
Thanks.
saeedirfaan said:
No No bro listen, I did a mistake while installing the Custom ROM.
I forgot to flash the boot.img and did full wipe even formatted the system. Rebooted the system without installing the ROM. Now, stuck at Sony Logo. (NOTE: During this I had the battery charged full)
To rectify the above issue, I tried to flash the boot.img through fastboot mode in Flashtool and install the Custom ROM through CWM. To connect to flashtool, the device should be switched off. Now, I cant switch off. I can only restart. Hence, I drained the battery completely and tried to connect to Flashtool. When I hold Volume Up key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, also when holding Volume Down key and connect to PC through USB, only red LED lights up. It is not connecting to Flashmode.
Please help!
Thanks.
Click to expand...
Click to collapse
No you do not need to drain the baterry, nor do you need to shut down the phone.
In the link you have provided it shows you how to boot into fastboot via adb (Click 4).
Recharge your phone and follow the steps given there.
Stuck at Sony logo!
ChikeD said:
No you do not need to drain the baterry, nor do you need to shut down the phone.
In the link you have provided it shows you how to boot into fastboot via adb (Click 4).
Recharge your phone and follow the steps given there.
Click to expand...
Click to collapse
I did the following things:
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC. - My Phone is ON, but stuck at Sony Boot Logo
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action needs a connected device in ADB mode
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action can only be done in fastboot mode
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin. - Gets Error: This action can only be done in fastboot mode
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode. - Gets Error: This action can only be done in fastboot mode
Please Help!
Irfan
saeedirfaan said:
I did the following things:
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC. - My Phone is ON, but stuck at Sony Boot Logo
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action needs a connected device in ADB mode
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action can only be done in fastboot mode
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin. - Gets Error: This action can only be done in fastboot mode
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode. - Gets Error: This action can only be done in fastboot mode
Please Help!
Irfan
Click to expand...
Click to collapse
Turn the phone off, no need to drain battery, just press power + volume up until you feel 1 + 3 vibrations, open flashtool and connect in fastboot mode (volume up while connecting USB)
Do you see device connected in fasboot mode in flashtool log?
Did you install fastboot drivers from flashtool?
What is you windows version?
Got it Worked!
ChikeD said:
Turn the phone off, no need to drain battery, just press power + volume up until you feel 1 + 3 vibrations, open flashtool and connect in fastboot mode (volume up while connecting USB)
Do you see device connected in fasboot mode in flashtool log?
Did you install fastboot drivers from flashtool?
What is you windows version?
Click to expand...
Click to collapse
Nothing worked, anyway thanks bro.
I gave the phone to the technician and he made it to work. Now, I have sony xperia sola running 6.1.1.b.1.10 firmware. I am unable to update it to 6.1.1.b.1.54, error displaying as unable to communicate with sony. No Root, No CWM, just an unlocked bootloader.
Now, please tell how to root from here (6.1.1.b.1.10 firmware) and install CWM and flash some new custom ROMs.
Thanks,
Irfan
Hi all,
What I did:
- Install TWRP
- Installed a bad ROM through recovery mode
- #brick
Now:
- Stuck in mi logo bootloop
- I can't get to EDL
- I can get to fastboot, but I can't seem to run any commands on my PC
- I can't get to recovery mode
EDL Mode
- I can't seem to get to EDL mode where the red light flashes
- I have tried going to fastboot --> Removing power --> Power + and Power - and Power. Wait for Mi logo to flash twice, and it goes into "Power off mode"
- When I connect to USB again, it connects to the PC and charges
- In device manager, I can see Xiaomi Composite MDB Interface
- No connectivity over adb command
Fastboot Mode
- I can get into Fastboot
- Connect Fastboot into the PC, I am unable to run any adb or fastboot commands.
- Fastboot devices shows nothing, adb devices shows nothing
- In device manager, I can see Android Bootloader Interface
I've tried many soft options and have read through probably 30+ guides. I have not tried the test point method because I do not want to void my warranty.
Anyone experience this and can help?
Thanks!
Try re-installing the driver and see if those adb/fastboot commands work.
U said u installed TWRP right . Then u can go to recovery by pressing volume up+power button and then install another custom rom or stock rom but if u have unofficial unlocked bootloader then flashing stock rom will relock ur bootloader and device will not bootup.So go for another custom rom like resurrection remix its super stable n smooth too.
Follow these two tutorials.
http ://en.miui.com/thread-274589-1-1 . html
http ://en.miui.com/thread-235865-1-1 . html
To enter EDL mode, you need to unplug the battery, wait 10 seconds, replug it. Then, remove the USB plug, replace it, then while holding both volume + and -, plug the phone in the computer using the original cable.
Make sure to check what you're getting in device manager. If you get USB_BULK, you need to download the drivers. If you're getting diagnostics, you did the earlier procedure wrong so try it again. If you're getting 9008, you've gained access to EDL.
I have one xperia aqua m4 dual e2363, problem - it was turning off within seconds when power on after boot logo, but while charging, showing battery charging properly.
So i tried to repair it via pc companion, while process was going on, it just failed in middle.
Now, handset only shows sony black logo with white screen after powering on or in charging.
It is also not detecting with pc.
When i connect it with holding volume down key, it just shows green led on top but doesnt detected by pc
What to do?
Update : handset only detects in fastboot mode. unable to detect in flashmode. tried with sony flasher tool also. any way to flash it in fastboot mode, or any way to force boot it in flashmode
Get the OEM image from here https://forum.xda-developers.com/t/...xperia-m4-aqua-dual-marshmallow-only.3422263/ and flash it with Flashtool http://www.flashtool.net/index.php
7564321 said:
Get the OEM image from here https://forum.xda-developers.com/t/...xperia-m4-aqua-dual-marshmallow-only.3422263/ and flash it with Flashtool http://www.flashtool.net/index.php
Click to expand...
Click to collapse
As i have already mentioned, my phone is only detecting in fastboot mode. no signs while connecting it via flashmode. plz guide how to flash it in fastboot mode using flashtool or any other tool.
k_abhi said:
As i have already mentioned, my phone is only detecting in fastboot mode. no signs while connecting it via flashmode. plz guide how to flash it in fastboot mode using flashtool or any other tool.
Click to expand...
Click to collapse
try flashing the file in fastboot mode
Not my name said:
try flashing the file in fastboot mode
Click to expand...
Click to collapse
while selecting file to flash in fastboot mode, it asks for file in .sin/.img/.ext4/.yaffs2 format. but i have file in .ftf format. then how to flash? plz guide