Related
I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
Hello all!
I'm having an issue with my SGS2 Skyrocket. I was attempting to flash on a new ROM (Darkside, not important, you'll see why). I did a full wipe, then went to transfer the .zip file over in CWM. I was in a hurry, and didn't think to wait til it had transferred all the way (in Linux, didn't give me a pop up about it, wasn't thinking). So I unplugged it. Now my CWM is gone, in recovery it boots into Odin. In Odin when I attempt to flash anything on, it gives me a 'no ptn table' error on the phone screen, and it just flat fails on the PC. I've tried the unbrick forum guide, to no avail. Any suggestions? (The CWM was the one installed by ROM Manager if that is important, the ROM was Cyanogenmod 9)
Suggestion:
try your own forum.
Oh. Crap. That would explain why it didn't work, and why I now can't boot my phone. Crap.
They lovez our forumz!
Hi,
I have a samsung S3 and I want to update it to lollipop or above as my nexus 5 has started randomly rebooting and I need a phone to use whilst I sort a replacement.
I have been following this guide: wccftech.com/install-aosp-android-5-1-1-lollipop-on-galaxy-s3/ as I'm a bit of a noob when it comes to this custom rom business.
I have rooted the device and installed clockworkmod recovery v6.0.1.2. and copied over the rom and the gapps file to my phone.
I then booted into recovery mode and made a backup of the current setup.
I then did the factory reset and the cache wipe(s) and installed the new zip for lollipop and then the gapps.
This is where I received an error "E: Error in /sdcard/0/0/0/Download/gapps-lp-20150314.zip (status 7) installation aborted".
I figured that I should restore to my backup now but when I press it, the app says that files can't be found.
I can see that the files that I backed up do exist but they appear to have been dumped inside a new directory called /0/0/0 (I think this has got three levels because I've tried this a few times).
Now I can't boot into an OS to get any other roms on the phone and I can't edit the files on there (I googled and saw a possible fix for the gapp status 7) and I can't get clockworkmod to recognise an external SD card so I can copy over a new rom or file to try (I have googled and it's suggested the FAT32 is the format for this phone and my size of SD card (16GB)).
Can anyone offer me some advice on how to get out of this situation?
Thanks
Sounds like you're at a place where you should start exploring using your computer instead of a recovery in order to fix your system.
I recommend using the PC software Odin and installing a stock ROM of your device. (Or perhaps using fastboot)
There's plenty of guides on how to use Odin both here on XDA and on the rest of the internet if you just look around a bit
EDIT: This link contains a (possible) fix for your problem.
http://forum.xda-developers.com/showthread.php?t=2522762
Don't use cwm as it is an outdated recovery. Use twrp instead.
Sgt.Mindfudge said:
Sounds like you're at a place where you should start exploring using your computer instead of a recovery in order to fix your system.
I recommend using the PC software Odin and installing a stock ROM of your device. (Or perhaps using fastboot)
There's plenty of guides on how to use Odin both here on XDA and on the rest of the internet if you just look around a bit
EDIT: This link contains a (possible) fix for your problem.
http://forum.xda-developers.com/showthread.php?t=2522762
Click to expand...
Click to collapse
I had a look at the link you suggested and it's one of the suggestions that had come up whilst I was googling for a fix. Unfortunately, I don't have any way to get the updated script onto the phone as the phone isn't picked up by my pc whilst it's in this state, and I can't get the recovery tool to recognise the sd card so I can't put it on there either.
I'll take a look at the stock rom or fastboot option and see if I can get back into the phone. Maybe then I can apply the fix in the suggested post.
Thanks
audit13 said:
Don't use cwm as it is an outdated recovery. Use twrp instead.
Click to expand...
Click to collapse
I'll see if I can install twrp through odin.
Thanks for your help
If the phone works in download mode, try to flash a stock rom too.
Update - fixed
Hi all, just wanted to let you know that I fixed the device with the combined advice from here:
I installed TWRP after holding the volume down + power + home buttons and then pressing volume up when the message appears (I can't remember what this mode is called). I then flashed the device with the TWRP image.
After this I rebooted into the TWRP recovery mode (Volume up + home + power and then release power button when the samsung logo appears).
At this point, the device appeared on my windows machine so I could upload a new image to the internal memory.
I decided to copy on CM13 and GApps.
I then wiped the cache, system, data, and davik cache using TWRP, then I installed CM13 and GApps.
After a reboot the device came back up as a new install.
Hopefully that information may be useful to somebody.
Thanks for all your help
Hey guys,
Got a no name phone with mtk6580 and kernel 3.10.72 running custom Chinese android 5.1, and as you probably guessed I got problem flashing custom recovery on it, the device is not on the list for neither TWRP nor CWP.
What to do?
Thank you
Vant2239 said:
Hey guys,
Got a no name phone with mtk6580 and kernel 3.10.72 running custom Chinese android 5.1, and as you probably guessed I got problem flashing custom recovery on it, the device is not on the list for neither TWRP nor CWP.
What to do?
Thank you
Click to expand...
Click to collapse
A good place for no name phones is here:
https://forum.hovatek.com/forum-76.html
Either have a search or put a request for someone to make a TWRP for your phone, I put a request in and the next day someone made one for me.
I did try to make my own from a guide on here, its apparently really easy but I just couldnt get it to work, here is the one someone made for me which may work or at least gives you a good starting base to try: http://www.needrom.com/download/uhappy-up580-twrp-recovery/
robneymcplum said:
A good place for no name phones is here:
https://forum.hovatek.com/forum-76.html
Either have a search or put a request for someone to make a TWRP for your phone, I put a request in and the next day someone made one for me.
I did try to make my own from a guide on here, its apparently really easy but I just couldnt get it to work, here is the one someone made for me which may work or at least gives you a good starting base to try: http://www.needrom.com/download/uhappy-up580-twrp-recovery/
Click to expand...
Click to collapse
Once again thanks a lot for reply!
I have successfully ported one of your builds, but with some mindless actions trying to flash recovery through fast boot got a boot loop of some sort, logo keeps appearing and phone doesn't boot.
What I did is in fastboot flashed recovery with help of 'fastboot oem unlock' and now I just stuck. I have stock recovery, tried to flash it back but unsuccessfuly. Any idea how can I fix it?
Sorry for being such a noob
recovery and/or firmware should be flashed with SPflash tool simply because I find its the easiest way,
Perfect way of doing things is:
SPflash tools=flash stock firmware til 'done' close SPflash
remove battery, put back in, boot, maybe stuck on boot image (happens to me 50% of the time)
remove battery, put back in, boot. Let it boot up and set up wifi/internet
turn off phone, battery out, back in DONT POWER ON
reopen SPflash, select correct scatter.txt file from stock firmware again
unselect all tick boxes, tick recovery box, click on 'address or location of recovery' and locate the TWRP image
click download, plug turned off phone in.
wait til done.
battery out, back in, boot to recovery with correct button presses (volume up+power?)
in recovery, set correct time
reboot recovery and allow install of superSU, reboot phone, select superSU from the notification and update.
Then put the new custom rom onto sdcard and reboot back to recovery, wipe system/data/cache/dalvik cache and install rom
install gapps
wipe caches
reboot
That is a perfect way of doing it, if the rom doesnt boot something is wrong with the rom/boot img/something
fix that, put back onto sdcard, just do the 4 wipes again and install rom again
and again
and again
until it is fixed and boots.
robneymcplum said:
recovery and/or firmware should be flashed with SPflash tool simply because I find its the easiest way,
Perfect way of doing things is:
SPflash tools=flash stock firmware til 'done' close SPflash
remove battery, put back in, boot, maybe stuck on boot image (happens to me 50% of the time)
remove battery, put back in, boot. Let it boot up and set up wifi/internet
turn off phone, battery out, back in DONT POWER ON
reopen SPflash, select correct scatter.txt file from stock firmware again
unselect all tick boxes, tick recovery box, click on 'address or location of recovery' and locate the TWRP image
click download, plug turned off phone in.
wait til done.
battery out, back in, boot to recovery with correct button presses (volume up+power?)
in recovery, set correct time
reboot recovery and allow install of superSU, reboot phone, select superSU from the notification and update.
Then put the new custom rom onto sdcard and reboot back to recovery, wipe system/data/cache/dalvik cache and install rom
install gapps
wipe caches
reboot
That is a perfect way of doing it, if the rom doesnt boot something is wrong with the rom/boot img/something
fix that, put back onto sdcard, just do the 4 wipes again and install rom again
and again
and again
until it is fixed and boots.
Click to expand...
Click to collapse
Im getting an error when try to flash it: ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
trying to flash stock firmware?
I had numerous issues getting mine to flash the first time, I downloaded and tried different versions of SPflash tools, different USB leads/ports etc...
I have to use a USB lead from my moto x play as the stock lead wouldnt work, my galaxy tab lead wouldnt work either.
I have to use SPflash tool version SP_Flash_Tool_exe_Windows_v5.1552.00.000 as other versions kept bringing up that error and similar ones.
It really does seem to be trial and error unfortunately.
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM (Eastern Time): I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
RyokoOnXDA said:
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM: I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
Click to expand...
Click to collapse
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I managed to get into recovery. I don't know how to flash Android 7.0 for my Aristo, though.. so I'm researching it.
EDIT: Got a ROM flashed. Everything working now.
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
Sent from my LGE LM-X220 using XDA Labs