Hello im newb here but i know about root and stuff
so...
Hboot 1.53
ICS KingCobra 3d
and.... i try install CM11LiquidSmooth http://forum.xda-developers.com/showthread.php?t=2638534
i do everything they sayd....
_format all
_instal rom
_instal GAAPS
and i get stuck on 1st boot at HTC screen...
what should i do to get CM11 installed normaly.... ?
Magar90 said:
Hello im newb here but i know about root and stuff
so...
Hboot 1.53
ICS KingCobra 3d
and.... i try install CM11LiquidSmooth http://forum.xda-developers.com/showthread.php?t=2638534
i do everything they sayd....
_format all
_instal rom
_instal GAAPS
and i get stuck on 1st boot at HTC screen...
what should i do to get CM11 installed normaly.... ?
Click to expand...
Click to collapse
Phone must be on hboot 1.49.xxxx and S-Off
SiljoCRO said:
Phone must be on hboot 1.49.xxxx and S-Off
Click to expand...
Click to collapse
It is S off
1.49 ? how i can downgrade it? (easy way plz)
I see i can easly use zip file via bootloader but when i do it nothing happen...
EDIT 2
I have cid Htc_032
i tryied in bootloader but after "pushing zip." nothing happens... i realy dunno what to do
Magar90 said:
It is S off
1.49 ? how i can downgrade it? (easy way plz)
I see i can easly use zip file via bootloader but when i do it nothing happen...
EDIT 2
I have cid Htc_032
i tryied in bootloader but after "pushing zip." nothing happens... i realy dunno what to do
Click to expand...
Click to collapse
Rename your h-boot zip to PG86IMG and put it on root of your SD card. Then just reboot to bootloader and when prompted press vol up button. When it's done you need to delete that zip from your SD or rename it
donkeykong1 said:
Rename your h-boot zip to PG86IMG and put it on root of your SD card. Then just reboot to bootloader and when prompted press vol up button. When it's done you need to delete that zip from your SD or rename it
Click to expand...
Click to collapse
w8 w8... tell me how... like for total retard...
i have renamed zip i have it on SD i press fastboot there are green commands and "pushing file *zip name*" and nothing more... its take about 8sec and nothing is maded or downgraded
Magar90 said:
w8 w8... tell me how... like for total retard...
i have renamed zip i have it on SD i press fastboot there are green commands and "pushing file *zip name*" and nothing more... its take about 8sec and nothing is maded or downgraded
Click to expand...
Click to collapse
You don't need a computer or fastboot. You just take out your battery, put it back, and press power and vol down to get into bootloader. When bootloader comes up, it will scan your SD card and when it finds PG86IMG it wil ask you if you want to update. Press vol up ( that means "yes") and wait till it's done
donkeykong1 said:
You don't need a computer or fastboot. You just take out your battery, put it back, and press power and vol down to get into bootloader. When bootloader comes up, it will scan your SD card and when it finds PG86IMG it wil ask you if you want to update. Press vol up ( that means "yes") and wait till it's done
Click to expand...
Click to collapse
nope... i done that and its scan SD and ask me nothing.... why ?
Magar90 said:
nope... i done that and its scan SD and ask me nothing.... why ?
Click to expand...
Click to collapse
Sorry, it should be PG86IMG.zip
I hate that captcha....
So i renamed it to PG86IMG.zip no its do nothing again... i realy dunno....
green status commands pops and nothing more
donkeykong1 said:
Sorry, it should be PG86IMG.zip
Click to expand...
Click to collapse
any help ?
" hate that captcha....
So i renamed it to PG86IMG.zip no its do nothing again... i realy dunno....
green status commands pops and nothing more
TODAY 04:02 PM"
EDIT posted secong post for quote (its send reminder to email helping ppl to see if some1 post = faster answer)
Magar90 said:
any help ?
" hate that captcha....
So i renamed it to PG86IMG.zip no its do nothing again... i realy dunno....
green status commands pops and nothing more
TODAY 04:02 PM"
EDIT posted secong post for quote (its send reminder to email helping ppl to see if some1 post = faster answer)
Click to expand...
Click to collapse
Did you place zip in root of your card?
donkeykong1 said:
Did you place zip in root of your card?
Click to expand...
Click to collapse
what do u mean ? There is note "paste to ur sd card" so i do it "pasted on sd main folder not any sub folder|"
Magar90 said:
what do u mean ? There is note "paste to ur sd card" so i do it "pasted on sd main folder not any sub folder|"
Click to expand...
Click to collapse
That's it. It should work. I'll send you the zip file that worked for me
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
https://www.dropbox.com/s/z4l4i6b4wvi9mdv/PG86IMG.zip
Here you go. Delete yours, and try with this one
donkeykong1 said:
That's it. It should work. I'll send you the zip file that worked for me
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
https://www.dropbox.com/s/z4l4i6b4wvi9mdv/PG86IMG.zip
Here you go. Delete yours, and try with this one
Click to expand...
Click to collapse
same thing... get lots of green commands
than 1 Pushing zip file and its back to menu....
i have s off "unlocked" bootloader and dunno realy feel dumb -.-
EDIT i have
-unlocket bootloader
-s on (my bad i say s off)
so there is my problem i thing
Magar90 said:
same thing... get lots of green commands
than 1 Pushing zip file and its back to menu....
i have s off "unlocked" bootloader and dunno realy feel dumb -.-
Click to expand...
Click to collapse
I really don't know why it won't work, sorry
donkeykong1 said:
I really don't know why it won't work, sorry
Click to expand...
Click to collapse
i need s off to downgrade hboot?
Magar90 said:
i need s off to downgrade hboot?
Click to expand...
Click to collapse
Yes. If you're S-on, it won't work. You got me worried there [emoji29]
donkeykong1 said:
Yes. If you're S-on, it won't work. You got me worried there [emoji29]
Click to expand...
Click to collapse
not only u ;p But i get root and s off i tough so...
so can u help me s off? without wire trick... i have cid 032
Magar90 said:
not only u ;p But i get root and s off i tough so...
so can u help me s off? without wire trick... i have cid 032
Click to expand...
Click to collapse
With your h-boot version wire trick is the only way to get s-off. CID is not important
donkeykong1 said:
With your h-boot version wire trick is the only way to get s-off. CID is not important
Click to expand...
Click to collapse
this wont work ?http://forum.xda-developers.com/showthread.php?t=1795934
its feel more easy than wire trick
damn its countain wire... can u tell me tehre is any CM 11 or andy 4.2.x rom for this htc 1.53 hboot?
i want kitkat but i dont want making wire....
Related
yours htc flyer need be s-off
root:
precondition:HTC FLYER s-off
1\ flyer CONNECT TO PC
2\ RUN ROOT.BAT
3\ ok
phone rom:
tt p://60.221.255.180/down_group99/M00/13/22/tzydGk4A3XwAAAAAIXGJlneESV89984648/PG41IMG.zip?k=vzAkpO4v-FmO3qvz5h0kMg&t=1308915621&u=219.141.225.111|0|e60 t4icf&file=PG41IMG.zip
or ttp://u.115.com/file/e60t4icf if you understand chinses
NEED S-OFF
you know h~t~t~p
1\ put the PG41IMG.ZIP on sd card
2\ into HBOOT model
3\ according to tips
4\ restart
5\ok
how you get S-OFF? is your ROM factory S-OFF?
ovigt71 said:
how you get S-OFF? is your ROM factory S-OFF?
Click to expand...
Click to collapse
Unfortunately in this case I believe it has to be factory s-off :/
JaiaV said:
Unfortunately in this case I believe it has to be factory s-off :/
Click to expand...
Click to collapse
yes...I think so... mine is S-ON.....can't follow the above procedure
sory this is my first time used htc,
i have a few question,
1. how we get into hboot ??
2. how to check our hboot series ??
3. and what is s off ??
xfakexbloodx said:
sory this is my first time used htc,
i have a few question,
1. how we get into hboot ??
2. how to check our hboot series ??
3. and what is s off ??
Click to expand...
Click to collapse
Don't worry about it, these are things you don't need to know =)
xfakexbloodx said:
sory this is my first time used htc,
i have a few question,
1. how we get into hboot ??
2. how to check our hboot series ??
3. and what is s off ??
Click to expand...
Click to collapse
1. Restart your flyer with the volume button up pressed continously, your now into hboot.
2. Check hboot, all info is in there.
3. S-OFF aka permaroot, you can check its status in HBOOT.
Good luck!
Not Working for Factory S-Off flyer
Not Working for Factory S-Off flyer
tested but nothing.
I also tested it a couple of days ago.
It can't work. Because it uses the "rageagainstthecage" exploit. And this exploit doesn't work for the flyer!
Why do you post things which don't even work!?
nickiberli said:
Why do you post things which don't even work!?
Click to expand...
Click to collapse
Why not read the 1st post ?
geek78 said:
Why not read the 1st post ?
Click to expand...
Click to collapse
I read it. Why do you mean?
My Flyer is Ship S-Off...
nickiberli said:
I read it. Why do you mean?
My Flyer is Ship S-Off...
Click to expand...
Click to collapse
Bro, what version of your HBOOT? Is it possible to dump your rom? Maybe there's something I can find on how to S-Off my device.
imranz said:
Bro, what version of your HBOOT? Is it possible to dump your rom? Maybe there's something I can find on how to S-Off my device.
Click to expand...
Click to collapse
Yeah of course!
I want to help if I can, you just have to say what am I supposed to do.
dalada said:
yours htc flyer need be s-off
root:
precondition:HTC FLYER s-off
1\ flyer CONNECT TO PC
2\ RUN ROOT.BAT
3\ ok
phone rom:
tt p://60.221.255.180/down_group99/M00/13/22/tzydGk4A3XwAAAAAIXGJlneESV89984648/PG41IMG.zip?k=vzAkpO4v-FmO3qvz5h0kMg&t=1308915621&u=219.141.225.111|0|e60 t4icf&file=PG41IMG.zip
or ttp://u.115.com/file/e60t4icf if you understand chinses
NEED S-OFF
you know h~t~t~p
1\ put the PG41IMG.ZIP on sd card
2\ into HBOOT model
3\ according to tips
4\ restart
5\ok
Click to expand...
Click to collapse
Does anyone success to download the Phone ROM given above? It seems that I got error Forbidden when trying to download it. Anyone can share the file or provide mirror please? Thanks
Follow the second link. I already downlaoded....but is useless, unless you don't have a s-off....
Sent from my HTC Flyer P510e using Tapatalk
dalada said:
yours htc flyer need be s-off
root:
precondition:HTC FLYER s-off
1\ flyer CONNECT TO PC
2\ RUN ROOT.BAT
3\ ok
phone rom:
tt p://60.221.255.180/down_group99/M00/13/22/tzydGk4A3XwAAAAAIXGJlneESV89984648/PG41IMG.zip?k=vzAkpO4v-FmO3qvz5h0kMg&t=1308915621&u=219.141.225.111|0|e60 t4icf&file=PG41IMG.zip
or ttp://u.115.com/file/e60t4icf if you understand chinses
NEED S-OFF
you know h~t~t~p
1\ put the PG41IMG.ZIP on sd card
2\ into HBOOT model
3\ according to tips
4\ restart
5\ok
Click to expand...
Click to collapse
Maybe a stupid question, but what can i do with this?
Rooting the flyer, and remove al bloatware?
and calling with the flyer??
Thnx
Here is a mirror to download the "phone enabled" ROM.
http://www.multiupload.com/33MNQX916D
Was anyone actually able to flash this on an S-OFF device?
Unfortunately i don't have one to test with.
clubtech said:
Here is a mirror to download the "phone enabled" ROM.
http://www.multiupload.com/33MNQX916D
Was anyone actually able to flash this on an S-OFF device?
Unfortunately i don't have one to test with.
Click to expand...
Click to collapse
Thank you very much. U're the man
How do I go into hboot
So anybody manage to use the phone app yet ?
I was try to do this almast 2 mounts.
Very 1st I need to say sorry about my bad English
changing CID is needed for non-europe useres...
1. Unlock your bootloader with HTC Unlocktoken
2. Change your CID on fastboot
fastboot oem writecid HTC__001
Click to expand...
Click to collapse
3.Re-Lock your bootloader
fastboot oem lock
Click to expand...
Click to collapse
[If you already have europian CID and hboot 1.49.0018 you can pass first 2 steps...]
Yes Thats it Now all you need PG86IMG.zip on your SD card.
Download PG86IMG.zip http://www.multiupload.com/39NSAMWQU7 NOTE:it will delete all your internal memory. Before flash it make backup)
4. Put your sd Card to your pc copy PG86IMG.zip to your sd card root
5. Power off your phone.
6. Press Vol Down+Power to open hboot.
7. Let the device find the zip file and flash it.
8. Chk the hboot version now.
9. I thing I don't need to explain how to use Revolutionary tool
Spacial Thanks for Football for the offician RUU, Metronom76 for the CID changing Code, Scorpunix for flashable HBoot files
when you changed CID it will say [FATAL ERROR] you can basicly ignore that. there is no error.
hey thanks for the info, which offical RUU has the older hboot so I can go ahead and download it?
Nice one. I'm sure lots of people will benefit from this
I won't need to. I'm already s-offed using revolutionary
Sent from my HTC EVO 3D X515m using XDA App
kartikb said:
hey thanks for the info, which offical RUU has the older hboot so I can go ahead and download it?
Click to expand...
Click to collapse
This one has HBoot 1.49.0007
RUU_Shooter_U_HTC_Europe_1.20.401.2_Radio_10.53.90 20.00_10.13.9020.08_2M_release_203403_signed
http://www.filefactory.com/file/cc7e...403_signed.exe
Click to expand...
Click to collapse
I'm still uploading the PG86IMG file. I'll let you know when it's done
thanks, I'll go ahead and download that file, if before that you do manage to upload the hboot file, I'll just download the hboot.
Thanks a lot
my upload is not the Hboot only. It's basicly the same rom for flashing from SD card.
If you managed to spare it be my guess please because it is beyonde my talents
Upload complated link is on OP too
http://www.multiupload.com/39NSAMWQU7
kartikb said:
hey thanks for the info, which offical RUU has the older hboot so I can go ahead and download it?
Click to expand...
Click to collapse
If u want install 1.49.007 bootloader copy allegated file in root of your sd
and restart in bootloader
http://forum.xda-developers.com/showpost.php?p=18594158&postcount=26
Ganii said:
If u want install 1.49.007 bootloader copy allegated file in root of your sd
and restart in bootloader
http://forum.xda-developers.com/showpost.php?p=18594158&postcount=26
Click to expand...
Click to collapse
Thanks... I was not know which files are needed for the flash new hboot.
HBOOT DOWNGRADE ADDED TO OP
Does that really work? Now a way to make S-OFF for devices with HBoot with version bigger than 1.49.0008?
Evengard said:
Does that really work? Now a way to make S-OFF for devices with HBoot with version bigger than 1.49.0008?
Click to expand...
Click to collapse
follow the tutorial it makes your hboot 1.49.0007
n_god said:
Thanks... I was not know which files are needed for the flash new hboot.
HBOOT DOWNGRADE ADDED TO OP
Click to expand...
Click to collapse
No problem!
But don`t know exactly,maybe some users need to edit the
"android-info.txt" inside the PG86IMG.zip,otherwise there can be problems
and downgrade wont work.
With hboot version 1.49.0018 it works!
Ganii said:
No problem!
But don`t know exactly,maybe some users need to edit the
"android-info.txt" inside the PG86IMG.zip,otherwise there can be problems
and downgrade wont work.
Click to expand...
Click to collapse
chaning CID is for that users because I tried chaning txt file and it doesn't work...
Ah Ok,then it should work for all
n_god said:
I was try to do this almast 2 mounts.
Very 1st I need to say sorry about my bad English
changing CID is needed for non-europe useres...
1. Unlock your bootloader with HTC Unlocktoken
2. Change your CID on fastboot
3.Re-Lock your bootloader
Yes Thats it Now all you need PG86IMG.zip on your SD card.
Download PG86IMG.zip http://forum.xda-developers.com/showpost.php?p=18594158&postcount=26
4. Put your sd Card to your pc copy PG86IMG.zip to your sd card root
5. Power off your phone.
6. Press Vol Down+Power to open hboot.
7. Let the device find the zip file and flash it.
8. Chk the hboot version now.
9. I thing I don't need to explain how to use Revolutionary tool
Spacial Thanks for Football for the offician RUU, Metronom76 for the CID changing Code, Scorpunix for flashable HBoot files
Click to expand...
Click to collapse
But why have i do to this downgrade? what is the benefit?
The benefit is S-Off which will allow you to flash any ROM/Kernel. If you currently have 1.49.0011 or above unlocked using the HTC method you would have had troubles where some ROMs just sit at the white HTC screen forever or error messages when trying to flash kernels ect.
This will fix all those issues!
at last i can unleash my evo 3d thanks to all
Sent from my HTC EVO 3D X515m using xda premium
is it possible to change cid without s off !?
Ganii said:
Ah Ok,then it should work for all
Click to expand...
Click to collapse
Notice me main version is older......
---------- Post added at 01:33 AM ---------- Previous post was at 01:25 AM ----------
n_god said:
I was try to do this almast 2 mounts.
Very 1st I need to say sorry about my bad English
changing CID is needed for non-europe useres...
1. Unlock your bootloader with HTC Unlocktoken
2. Change your CID on fastboot
3.Re-Lock your bootloader
Yes Thats it Now all you need PG86IMG.zip on your SD card.
Download PG86IMG.zip http://forum.xda-developers.com/showpost.php?p=18594158&postcount=26
4. Put your sd Card to your pc copy PG86IMG.zip to your sd card root
5. Power off your phone.
6. Press Vol Down+Power to open hboot.
7. Let the device find the zip file and flash it.
8. Chk the hboot version now.
9. I thing I don't need to explain how to use Revolutionary tool
Spacial Thanks for Football for the offician RUU, Metronom76 for the CID changing Code, Scorpunix for flashable HBoot files
Click to expand...
Click to collapse
unlocked+son+chang cid to HTC__001 after i lock the hboot
when loading the PG86IMG.ZIP
no any notice
after checking is jump out
because after offical unlock
main version with recovery must > device version
if i turned to Relock
Only can flash offical PG86IMG.ZIP
I Need a version > 2.5.0.0 with offical signature
My Hboot version is 1.49.0012
waiting for rev soff......
Hi Everyone,
I have a Mobilicity Amaze 4G, got the OTA ICS notification and cant seem to update.
After hitting "Install Now" the phone restarts and shows a green "X" in the center.
I have to do a battery pull to get the phone working again and it loads with ginger bread.
I am on stock Mobilicity ginger bread, phone is rooted with S-on. Nothing else has been done to it.
What could be the problem?
Will the method described here work?
skugpezz said:
Hi Everyone,
I have a Mobilicity Amaze 4G, got the OTA ICS notification and cant seem to update.
After hitting "Install Now" the phone restarts and shows a green "X" in the center.
I have to do a battery pull to get the phone working again and it loads with ginger bread.
I am on stock Mobilicity ginger bread, phone is rooted with S-on. Nothing else has been done to it.
What could be the problem?
Will the method described here work?
Click to expand...
Click to collapse
Yup, but you HAVE to meet the requirements, also if you're s-on, you have to relock your bootloader.
Sent from an Amaaaaaazing place :-D
Dark Nightmare said:
Yup, but you HAVE to meet the requirements, also if you're s-on, you have to relock your bootloader.
Sent from an Amaaaaaazing place :-D
Click to expand...
Click to collapse
How do i go about relocking the bootloader?
skugpezz said:
How do i go about relocking the bootloader?
Click to expand...
Click to collapse
Use hasoon's tool.
Dark Nightmare said:
Use hasoon's tool.
Click to expand...
Click to collapse
Been searching google and cant seem to find the tool.
Where do i find it.
Sorry for asking so many questions. I bought the phone rooted, so I am kinda new to it.
skugpezz said:
Been searching google and cant seem to find the tool.
Where do i find it.
Sorry for asking so many questions. I bought the phone rooted, so I am kinda new to it.
Click to expand...
Click to collapse
Look in the dev section of this very forum dude. Nooo need for gooooogle.
Dark Nightmare said:
Look in the dev section of this very forum dude. Nooo need for gooooogle.
Click to expand...
Click to collapse
Thank you i finally found it.
I really need some guidance.
After unzipping the folder I dont see an exe to start the program. All I see are batch files and htc driver.
How do I start the program?
skugpezz said:
Thank you i finally found it.
I really need some guidance.
After unzipping the folder I dont see an exe to start the program. All I see are batch files and htc driver.
How do I start the program?
Click to expand...
Click to collapse
You don't see an icon name Amaze 3.2? With an A as the icon? When you do, double click on that, it won't be in the data folder, it will be outside of it. Unzip the contents of the zip file into an empty folder so you won't lose any of the files in between your downloads.
Dark Nightmare said:
You don't see an icon name Amaze 3.2? With an A as the icon? When you do, double click on that, it won't be in the data folder, it will be outside of it. Unzip the contents of the zip file into an empty folder so you won't lose any of the files in between your downloads.
Click to expand...
Click to collapse
Found it, thanks sir.
Now is there anything i need to do before hitting the button to relock bootloader?
Yes boot into fastboot or bootloader n then hit the button.
Sent from my HTC_Amaze_4G using xda premium
skugpezz said:
Found it, thanks sir.
Now is there anything i need to do before hitting the button to relock bootloader?
Click to expand...
Click to collapse
I'd advise you to have the ruu ready, once relocked, it's gonna be stuck on the bootloader, but since it's wind, just choose fastboot then run the exe file, it's gonna restore everything on the phone to complete stock, I'd advise you to copy the OTA file from your internal sd card's download folder, copy it to your external sd card, once the stock ruu has finished installing from your pc and reboots, do a battery pull, hold volume down then power on, should take you to hboot, choose recovery, recovery should give you a red triangle, hit volume up then power button. install update.zip from external, browse to the OTA file then hit the power button, it's gonna install, reboot two times or so, voila! You're on ICS!
Dark Nightmare said:
I'd advise you to have the ruu ready, once relocked, it's gonna be stuck on the bootloader, but since it's wind, just choose fastboot then run the exe file, it's gonna restore everything on the phone to complete stock, I'd advise you to copy the OTA file from your internal sd card's download folder, copy it to your external sd card, once the stock ruu has finished installing from your pc and reboots, do a battery pull, hold volume down then power on, should take you to hboot, choose recovery, recovery should give you a red triangle, hit volume up then power button. install update.zip from external, browse to the OTA file then hit the power button, it's gonna install, reboot two times or so, voila! You're on ICS!
Click to expand...
Click to collapse
i went ahead and clicked relock bootloader before seeing your post.
You are right it is stuck on bootloader when i try to install the update.
What is ruu?
skugpezz said:
i went ahead and clicked relock bootloader before seeing your post.
You are right it is stuck on bootloader when i try to install the update.
What is ruu?
Click to expand...
Click to collapse
Ruu is the stock image of your systems stock Rom used to flash the device back to complete stock.
Check in the dev section for the stock ruu, it should be an exe file, so you'll have to flash it via pc, you'll have to put the phone into fastboot, turn it off until you get the ruu exe file.
Sent from an Amaaaaaazing place :-D
Dark Nightmare said:
Ruu is the stock image of your systems stock Rom used to flash the device back to complete stock.
Check in the dev section for the stock ruu, it should be an exe file, so you'll have to flash it via pc, you'll have to put the phone into fastboot, turn it off until you get the ruu exe file.
Sent from an Amaaaaaazing place :-D
Click to expand...
Click to collapse
There seems to be no Mobilicity ruu. I see all the others though.
Right now the phone is on and is working with gingerbread. I did the fastboot thing.
skugpezz said:
There seems to be no Mobilicity ruu. I see all the others though.
Right now the phone is on and is working with gingerbread. I did the fastboot thing.
Click to expand...
Click to collapse
Do you know how to use adb or is your phone rooted?
Sent from an Amaaaaaazing place :-D
Dark Nightmare said:
Do you know how to use adb or is your phone rooted?
Sent from an Amaaaaaazing place :-D
Click to expand...
Click to collapse
My phone is rooted, but I just relocked the bootloader.
Does relocking the bootloader unroots the phone?
I didnt know installing an ota i got in notification bar would be this hard.
All i want to do is install the official ICS update mobility sent to me this morning.
I bought my phone rooted, but it is still on gingerbread. i never done anything to it.
Requirements:
1. Stock GB of whichever provider you choose to install from be it Telus or T-Mobile
do note that you can only install the ICS OTA file of the exact providers who's stock GB you have installed.
2. The OTA corresponding file, I'll provide links to both below.
3. An SD card.
4. S-ON users will have to relock their bootloader.
Click to expand...
Click to collapse
Dont i already meet the requirements seeing that i have the gingerbread installed that came with the phone?
skugpezz said:
Dont i already meet the requirements seeing that i have the gingerbread installed that came with the phone?
Click to expand...
Click to collapse
It doesn't seems so, the green x usually means you have the wrong recovery and since hasoon removed that from his tool we need to flash the stock recovery by restoring a stock ruu.
Sent from an Amaaaaaazing place :-D
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
Okay, I think I found it, using hasoons tool, place this file here: http://dl.dropbox.com/u/19769336/recovery.img
into the data folder of the tool, start up his tool, then choose to flash your own recovery, it should select that file you downloaded and flash it, you have to do this via fastboot, after that, retry updating.
Dark Nightmare said:
It doesn't seems so, the green x usually means you have the wrong recovery and since hasoon removed that from his tool we need to flash the stock recovery by restoring a stock ruu.
Sent from an Amaaaaaazing place :-D
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
Okay, I think I found it, using hasoons tool, place this file here: http://dl.dropbox.com/u/19769336/recovery.img
into the data folder of the tool, start up his tool, then choose to flash your own recovery, it should select that file you downloaded and flash it, you have to do this via fastboot, after that, retry updating.
Click to expand...
Click to collapse
Thank you for the help so far, i appreciate it.
Just for clarification after relocking the bootloader the green "X" doesnt show anymore.
when i try to update after relocking the bootloader it gets stuck at the white screen that says "security warning relocked" at the top.
Should I still flash the recovery image?
What do you mean by "do this via fastboot"?
Should the phone be off while flashing?
Sorry I am just a little confused.
skugpezz said:
Thank you for the help so far, i appreciate it.
Just for clarification after relocking the bootloader the green "X" doesnt show anymore.
when i try to update after relocking the bootloader it gets stuck at the white screen that says "security warning relocked" at the top.
Should I still flash the recovery image?
What do you mean by "do this via fastboot"?
Should the phone be off while flashing?
Sorry I am just a little confused.
Click to expand...
Click to collapse
You're newer to this than I thought, awe brother.
Let's start over, I'll go look for the stock RUU for mobilicity, is your device from mobilicity or is it from another carrier?
Hello,
I have tried reading all of the stickies (and list of stickies post) for a method to downgrade hboot 1.58 without success. My ultimate goal is to be able to flash a custom recovery so that I can try the radio fix since my wife's Evo 3D will not complete the hands free activation and she does not get data services. We took the phone to the Sprint store and they said the previous owner flashed SOMETHING to the phone and messed up the radio. Any help would be greatly appreciated.
Sent from my SPH-L710 using xda premium
Mart1an said:
Hello,
I have tried reading all of the stickies (and list of stickies post) for a method to downgrade hboot 1.58 without success. My ultimate goal is to be able to flash a custom recovery so that I can try the radio fix since my wife's Evo 3D will not complete the hands free activation and she does not get data services. We took the phone to the Sprint store and they said the previous owner flashed SOMETHING to the phone and messed up the radio. Any help would be greatly appreciated.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
You need to do the wire trick. Its simple. Search for the guide on here and download the required stuff. Look at the video then follow the guide. After you have s-off then you download the hboot you want and put it on the SD card and flash.
There isn't another method to putting a custom recovery on the phone? I just want to fix this hands free activation failing.
Sent from my SPH-L710 using xda premium
Mart1an said:
There isn't another method to putting a custom recovery on the phone? I just want to fix this hands free activation failing.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Don't be afraid of trying the wire trick - it really isn't that frightening as long as you follow instructions. I managed to do it on my first go, much to my exhilaration
If the previous owner flashed something onto the phone then does it have some sort of recovery on it?
I succesfully downgrade my bootloader from 1.58 to 1.53 with this tutorial (Methode D):
/showthread.php?t=1743466
The wire trick is easy. It needs some attemps but it works great and you can not do lots of stuff wrong. :good:
So what is optimal hboot to load jb roms?
Sent from my PG86100 using xda app-developers app
ShifterX2 said:
So what is optimal hboot to load jb roms?
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
1.4 revolutionary or 1.04 eng if you ate CDMA (which I think you are judging by your signature).
Where can I find a tutorial on how to get to 1.4 for those roms? I'm at 1.58 , rooted, s-off (via wire trick). But now can't get the roms I would like because of hboot. Any help is appreciated by this noob rooter
Sent from my PG86100 using xda app-developers app
goodhitta said:
Where can I find a tutorial on how to get to 1.4 for those roms? I'm at 1.58 , rooted, s-off (via wire trick). But now can't get the roms I would like because of hboot. Any help is appreciated by this noob rooter
Click to expand...
Click to collapse
Here.
ramjet73
Thanks Ram. Will work on that tonight
Sent from my PG86100 using xda app-developers app
goodhitta said:
Where can I find a tutorial on how to get to 1.4 for those roms? I'm at 1.58 , rooted, s-off (via wire trick). But now can't get the roms I would like because of hboot. Any help is appreciated by this noob rooter
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
ramjet73 said:
Here.
ramjet73
Click to expand...
Click to collapse
ok...noob-ness is out. I have no idea how to do the flashing of bootloader.
goodhitta said:
ok...noob-ness is out. I have no idea how to do the flashing of bootloader.
Click to expand...
Click to collapse
Download the hboot you want from here: http://forum.xda-developers.com/showthread.php?p=30014044
Rename it PG86IMG.zip and place it on the root of your sd card. Reboot to bootloader and follow the prompts. Restart phone. You may need to take the card out and remove the zip from the sd card if you get a bootloop.
coal686 said:
Download the hboot you want from here: http://forum.xda-developers.com/showthread.php?p=30014044
Rename it PG86IMG.zip and place it on the root of your sd card. Reboot to bootloader and follow the prompts. Restart phone. You may need to take the card out and remove the zip from the sd card if you get a bootloop.
Click to expand...
Click to collapse
Sorry for the confusion.
I referenced that thread in the post I gave him above, but took it one step higher since my post gives a little more detail about the flashing methods and options to delete the PG86IMG.zip file if you flash it that way.
I guess he didn't read my post.
ramjet73
ramjet73 said:
Sorry for the confusion.
I referenced that thread in the post I gave him above, but took it one step higher since my post gives a little more detail about the flashing methods and options to delete the PG86IMG.zip file if you flash it that way.
I guess he didn't read my post.
ramjet73
Click to expand...
Click to collapse
I read it Ram, just got confused. I am NOT the most computer savoy person. lol THanks guys for your help and paitence
---------- Post added at 07:59 AM ---------- Previous post was at 07:29 AM ----------
coal686 said:
Download the hboot you want from here: http://forum.xda-developers.com/showthread.php?p=30014044
Rename it PG86IMG.zip and place it on the root of your sd card. Reboot to bootloader and follow the prompts. Restart phone. You may need to take the card out and remove the zip from the sd card if you get a bootloop.
Click to expand...
Click to collapse
Got it !! And stuck in a bootloop. Have taken card out amd removed the zip. Any ideas what I may have done wrong?
goodhitta said:
OK, its on the sd card and when I reboot to bootloader I'm not getting any prompts... I just have the normal selections (bootloader, reboot, reboot bootloader, power down) I tried the "rebbot bootloader" option few times as well as taking out battery and gettting back in there. Still no prompts.
What have I done wrong?
Click to expand...
Click to collapse
Make sure the file is in the root of the SD card and is named exactly "PG86IMG.zip" with the caps and without the quotes. Sometimes an extra ".zip" gets added when the file is downloaded to Windows and copied over, so it's best to check it with a file manager such as ES File Explorer on the phone.
Also, when you first start the bootloader it may not scan the card until you press the power button once to select fastboot.
Edit: I see you edited your last post and you've figured it out.
ramjet73
ramjet73 said:
Make sure the file is in the root of the SD card and is named exactly "PG86IMG.zip" with the caps and without the quotes. Sometimes an extra ".zip" gets added when the file is downloaded to Windows and copied over, so it's best to check it with a file manager such as ES File Explorer on the phone.
Also, when you first start the bootloader it may not scan the card until you press the power button once to select fastboot.
Edit: I see you edited your last post and you've figured it out.
ramjet73
Click to expand...
Click to collapse
I think the extra .zip was it. But Now I'm stuck in bbotloop and can't get out. I took out sd card and removed the zip file.
help......again
goodhitta said:
I think the extra .zip was it. But Now I'm stuck in bbotloop and can't get out. I took out sd card and removed the zip file.
help......again
Click to expand...
Click to collapse
You probably need to flash a ROM that is compatible with the bootloader you just installed. If you've removed the PG86IMG.zip file from the SD card you should be able to start recovery from the bootloader and flash a ROM. If you are using 4EXT, you will probably need to format cache+dalvik before it will let you do anything else.
ramjet73
ramjet73 said:
you probably need to flash a rom that is compatible with the bootloader you just installed. If you've removed the pg86img.zip file from the sd card you should be able to start recovery from the bootloader and flash a rom. If you are using 4ext, you will probably need to format cache+dalvik before it will let you do anything else.
Ramjet73
Click to expand...
Click to collapse
ram !!! You are a life saver !!
So what I'm getting from this post is that for me to downgrade from 1.58 to 1.4 I need to do the wire trick..... I was thinking that downgrading would have saved me from doing tht. I also noticed that my WiFi says error and 4g wouldn't come on... Not to mention my Bluetooth is sparatic... Very close to flinging it into toxic waste... Lol
Sent from my PG86100 using xda app-developers app
supahero00 said:
So what I'm getting from this post is that for me to downgrade from 1.58 to 1.4 I need to do the wire trick..... I was thinking that downgrading would have saved me from doing tht. I also noticed that my WiFi says error and 4g wouldn't come on... Not to mention my Bluetooth is sparatic... Very close to flinging it into toxic waste... Lol
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
All of those issues sound like a bad kernel flash. If you do the wire trick, flashing kernels is easier too.
Ok, so I found out the Kitkat version of Insertcoin was finally released for the ZaraCL. I figured I would flash it since I had been wanting to start fresh and remove some bloat.
This is what I have in the bootloader and the steps I have taken so far:
unlocked bootloader
s-off
CID-SPCS_002
HBOOT 2.22.0000
RADIO 1.14.50.1003
openDSP-v16.2.0268_noBeats.0902
OS-2.15.652.3
eMMC-boot 1024MB
1. flashed TWRP 2.7.1.1
2. flashed the kitkat hboot no red text mod from Duir
3. flashed Insertcoin 3.0.7 via TWRP
It says that the install completes, but when I go to boot into it I just get a boot loop to the HTC splash screen. I know I'm probably being stupid and missing something small, but I cant figure it out. Any help is appreciated.
--Tyler
try this:
Child's Play said:
boot into recovery and select "mount" then select "system" then select "file manager" and go to /system/bin/hcheck and delete or rename "hcheck" then reboot
Click to expand...
Click to collapse
could be the hcheck file.
alatnet said:
try this:
could be the hcheck file.
Click to expand...
Click to collapse
Thats for jb
---------- Post added at 07:03 PM ---------- Previous post was at 06:46 PM ----------
u flashed the kk hboot via sd card or fastboot? if u flashed it via sd card, u need to delete the 0P4EIMG.zip file from ur sd card
u flashed the kk hboot via sd card or fastboot? if u flashed it via sd card, u need to delete the 0P4EIMG.zip file from ur sd card
Click to expand...
Click to collapse
I flashed via fastboot. Should I try flashing from the sd card?
--Tyler
No. Try to reflash the insertcoin rom
Ok I'll do it again and report back.
Ok it still goes into a boot loop. First it vibrates and shows the HTC splash screen then it goes to another HTC screen that says powered by ANDROID at the bottom.
Maybe u need to delete the hcheck file but i dont want u to do it yet bec im not sure. Hopefully some1 else can help u
Child's Play said:
Maybe u need to delete the hcheck file but i dont want u to do it yet bec im not sure. Hopefully some1 else can help u
Click to expand...
Click to collapse
He doesnt have to delete it, he can rename it.
just by using the command "mv hcheck hcheck.bak".
he can revert it with "mv hcheck.bak hcheck"
Yeah u r right. Go ahead and do it. Let me know if it helps
Ok I tried it and now it just hangs at the second HTC screen. I don't know if that's an improvment or not.
EDIT: never mind I just didn't let it set long enough. It booted. Thank you so much y'all are awesome.