Just wanted to let you guys know of an open source implementation of the Hall sensors which allow the function of the S'View covers to work on custom ROMs like CM
HallMonitor
https://github.com/durka/HallMonitor/blob/master/README.md
Credits fully to the author, just posting here to let you guys know about it
Whosat said:
Just wanted to let you guys know of an open source implementation of the Hall sensors which allow the function of the S'View covers to work on custom ROMs like CM
HallMonitor
https://github.com/durka/HallMonitor/blob/master/README.md
Credits fully to the author, just posting here to let you guys know about it
Click to expand...
Click to collapse
OLD! And this app is crap. It uses proximity sensor.
ert69 said:
OLD! And this app is crap. It uses proximity sensor.
Click to expand...
Click to collapse
Mayby you should go back and read again what it does and what it uses before posting crap? Yes it uses the proximity sensor but it also uses the s-view sensor.
But it is no way near how nicely stock works.
theLofD said:
Mayby you should go back and read again what it does and what it uses before posting crap? Yes it uses the proximity sensor but it also uses the s-view sensor.
But it is no way near how nicely stock works.
Click to expand...
Click to collapse
Dude, i know. I used it a while ago on CM. At first it seems cool and everything, but after a while it annoys the crap out of you. Every time you accidentally place my finger near the proximity sensor the app goes off and interrupts what you were doing. I'm back on stock now and it's way nicer. Just flashed it yesterday after being on cm for months.
It's not as polished as in stock...
BUT, since version 0.2.x, it's improved a lot, and if pretty fine working
and, as said above it DOES utilize the magnetic sensor, no finger-craziness here
(Look on F-Droid for the latest version)
hi !
anothers feedback ? it really work fine ,like Stock rom ( as fine as this one ) ?
Loulou-13 said:
hi !
anothers feedback ? it really work fine ,like Stock rom ( as fine as this one ) ?
Click to expand...
Click to collapse
Not so fine as the stock, but it's help... Like said smartxdev, t's improved a lot.
badounet01 said:
Not so fine as the stock, but it's help... Like said smartxdev, t's improved a lot.
Click to expand...
Click to collapse
ok
thank !
a feedback on CM10.2 for to say that this app work very very fine !!! good work ! :good:
- Good wake-up when there are incoming sms and call
- No problem with deep-sleep mode ! work everytime ! ( verified by "cpu-spy" during some days... never have "misfire" )
Woks great in Carbon ROM.
Thanks!
can you answer phone calls by swiping the sview cover ?
gourgi said:
can you answer phone calls by swiping the sview cover ?
Click to expand...
Click to collapse
Try the new relese 0.4.1 it uses only the hall effect sensor, so it will consume less battery
You can answer phone calls not by swiping, by just touch.
Battery life?
Hi guys, anyone currently using this app? How's your battery life with it?
Thabks
Does it run on i9505?
Envoyé de mon S4, via tapatalk 4 .
Slimsaberkat 4.4.4 released, alucard Kernel , buzz launcher , modem ET bootloader NC4.
I justo notice con latest carbon ROM sensor is working
Hello,I have an Galaxy S5 and when i install hall monitor the s view screen size turns smaller
Is there any galaxy s5 cover edition of the app
Development progress / support for CM12.1
Development of HallMonitor seems to have stopped since version 0.4.2 (latest commit of the author "durka" is from 22 Jul 2014). This version doesn't support CM12(.1) (see issue 52 on durka's GitHub page).
Installation of the "MagnetOff" Xposed module is not a very useful workaround since you can't use the hall sensor (magnet sensor) anymore and would have to fall back on the proximity sensor (which is a pain in the a**).
The GitHub user "manusfreedom" has added several features and took development up to his version 2.0.2 beta (but his last commit is quite old too, from 21 Sep 2014). Has anyone tested manusfreedoms fork on CM12(.1)? Or does anyone know about a revival of HallMonitor's development? Would be so awesome to have this for CM12.1 :cyclops:
no rom with stock kernel? or export the s-view feature?
work like a charm on cm 13 and galaxy S4 ( advance gt9506) thx , my non-samsung cover work again. hall monitor for s view- like cover !!
and f-droid .... for the open app . give a look
elpiero said:
work like a charm on cm 13 and galaxy S4 ( advance gt9506) thx , my non-samsung cover work again. hall monitor for s view- like cover !!
and f-droid .... for the open app . give a look
Click to expand...
Click to collapse
Which app exactly? Where to download? Thx
Related
Just wanted to ask you guys are you using any version of cyanogenmod on your device? Or is it even available for sirius(Z2)? How about the CM11S?
aand yeah desided to ask this here because i didnt find anyone who had installed it on this device (even on youtube).
nano_ said:
Just wanted to ask you guys are you using any version of cyanogenmod on your device? Or is it even available for sirius(Z2)? How about the CM11S?
aand yeah desided to ask this here because i didnt find anyone who had installed it on this device (even on youtube).
Click to expand...
Click to collapse
I was, now I'm back to Stock .314. Why?
nano_ said:
Just wanted to ask you guys are you using any version of cyanogenmod on your device? Or is it even available for sirius(Z2)? How about the CM11S?
aand yeah desided to ask this here because i didnt find anyone who had installed it on this device (even on youtube).
Click to expand...
Click to collapse
I use it as my daily driver. My Z2 has been running the CM11 nightlies since the day they were released for the phone. What are you wondering exactly? I just saw the CM11S thread, but I'm not interested in it. If you're wondering, here's the CM11 downloads for the Z2: https://download.cyanogenmod.org/?device=sirius
M9 is out I think. It's the stable version.
Can anyone please tell me whether the active noise cancelling (not only the microphone noise suspension, but also the one that works with the special sony headphones) will still work on Cm? I hate to lose that feature as it's pretty much the only reason why I bought the Z2 over others.
jeremy.shi said:
M9 is out I think. It's the stable version.
Can anyone please tell me whether the active noise cancelling (not only the microphone noise suspension, but also the one that works with the special sony headphones) will still work on Cm? I hate to lose that feature as it's pretty much the only reason why I bought the Z2 over others.
Click to expand...
Click to collapse
It is already expected that Sony proprietary technologies will not be available on AOSP releases unless Sony decided to release its source codes. There maybe decent alternatives such as x-Loud vs DSP Settings but still not comparable to Sony's current setup.
How is CM on the Z2 now? I've been waiting for awhile to try it out as some people seemed to be having some problems, there was a lot of talk of bugs with it.
Well I've been using CM Nightlies since they came out and I can't go back
CM is faster, you have ART, the sound mixer is allot better, tones of CM themes on the play store... etc...
With stock Sony Rom you have noise cancellation but the sound with those headphones and equalizer is bad I have to say. The X-reality is quite nice but unfortunately only works with the Sony App Album witch I personal don't like.
The only thing that I miss is the camera that in the Stock Sony Rom is better... but for the rest CM rules big time! :good:
How's the battery life on CM11?
Better than stock especially is used with ds battery saver on xposed
Im using the one plus one cyanogenmod ROM for the z2 I love it but it constantly crashes :/
J
Sent from my Xperia Z2 using XDA Free mobile app
stanley08 said:
I was, now I'm back to Stock .314. Why?
Click to expand...
Click to collapse
Why did you switch back to stock?
Uclydde said:
I use it as my daily driver. My Z2 has been running the CM11 nightlies since the day they were released for the phone. What are you wondering exactly? I just saw the CM11S thread, but I'm not interested in it. If you're wondering, here's the CM11 downloads for the Z2: https://download.cyanogenmod.org/?device=sirius
Click to expand...
Click to collapse
I'm not yet have a phone but I'm wondering to buy it as soon as I figure out how well and stable custom ROMs (especially CM) work on it (just because i hate the stock one)
keanoo said:
How is CM on the Z2 now? I've been waiting for awhile to try it out as some people seemed to be having some problems, there was a lot of talk of bugs with it.
Click to expand...
Click to collapse
I got the same impression
JackHanAnLG said:
Im using the one plus one cyanogenmod ROM for the z2 I love it but it constantly crashes :/
Click to expand...
Click to collapse
You're talking about CM11S? Where have you downloaded it?
nano_ said:
Why did you switch back to stock?
I'm not yet have a phone but I'm wondering to buy it as soon as I figure out how well and stable custom ROMs (especially CM) work on it (just because i hate the stock one)
I got the same impression
You're talking about CM11S? Where have you downloaded it?
Click to expand...
Click to collapse
Try checking android development or original android development. Good place to start..
nano_ said:
Why did you switch back to stock?
Click to expand...
Click to collapse
Camera. I had an event to added, needed my camera in top shape, didn't want to take my S4 along. I believe camera still performs best on stock. So dats why
Camera performs exactly the same imo, just doesn't have as many advanced auto modes as stock camera
Mr.R™ said:
Camera performs exactly the same imo, just doesn't have as many advanced auto modes as stock camera
Click to expand...
Click to collapse
The difference between the pictures you take in CM and stock is huge. I went back to stock because of this too.
Hessi93 said:
The difference between the pictures you take in CM and stock is huge. I went back to stock because of this too.
Click to expand...
Click to collapse
Me too... I would love using CM, but the camera isn't just the same as stock (even on manual mode). Probably CM11 is using old camera drivers?
Recently flashed the M9 snapshot on my Z2 but have been running the nightlies for a while.
Very responsive and snappy usage and comparable battery life to stock (power saver not permitting).
Agree with the others regarding poor camera quality. Fidelity not as high in CM and slower 'shutter speed' than stock which sometimes results in blurry photos.
Otherwise very happy. Will continue using as daily driver.
I hope they can correct camera issues when 314 sources are released.
Sent from my D6503 via Tapatalk Pro
Flashed M9 release last night and having an issue with data/wifi. When I'm on wifi and either go out of range of wifi or turn off wifi my cellular data doesn't work. It says I have LTE but data will not work until I reboot or toggle airplane mode. Am I missing anything here?
I flashed latest 17.1.2.A.0.314 prior to flashing M9 to get latest baseband. This is on Tmobile LTE.
I have been using it as my daily driver since it was available. The only issues i currently have is that when my phone is docked in the Sony docking cradle thingy and i remove it the screen stays on as-in i have to manually lock/turn off my screen,it doesn't auto-lock. This only happens with the dock not with the normal charger. The second and final issue i have is the lack of the 4K recording feature, but then again that is not an issue for me at all,since 4k is completely pointless for me at the moment.
Apart from the above issues,i LOVE CM11 and will never ever go back to stock.
Q&A for [ROM][4.4.4][Unofficial] Carbon KitKat - Togari[2014-10-18]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
NFC not functional
On my Z Ultra, the NFC service seems to use a lot of battery. I went into settings to turn it off, but upon touching, it went grey but still ticked. Leaving that screen and going back into it reveals the NFC still ticked but not grey. Having to remove NFC service to prevent battery drain. Also, even NFC being on doesn't work with tags or anything. Any suggestions? Thanks heaps
Problem with sensors
Accelerometer, light, orientation, proximity, gyroscope and magnetic sensor no longer work on latest carbon (build 33)
Is there anyone else with the same problem?
Hilmhaz said:
Accelerometer, light, orientation, proximity, gyroscope and magnetic sensor no longer work on latest carbon (build 33)
Is there anyone else with the same problem?
Click to expand...
Click to collapse
I had the same problem on LiquidSmooth built from source. A build from around 26 September worked fine, so it seems there's something later than that causing it. I tried reverting some commits related to sensors, but was unable to find the cause of the issue. Maybe @OmarEinea knows. Someone reported it in PAC's thread on the Z1 forum, too. I also had to revert the latest media-caf-new commits to even get through the build using the SaberMod toolchain. Back to earlier builds for now, but it's still awesome.
Triflot said:
I had the same problem on LiquidSmooth built from source. A build from around 26 September worked fine, so it seems there's something later than that causing it. I tried reverting some commits related to sensors, but was unable to find the cause of the issue. Maybe @OmarEinea knows. Someone reported it in PAC's thread on the Z1 forum, too. I also had to revert the latest media-caf-new commits to even get through the build using the SaberMod toolchain. Back to earlier builds for now, but it's still awesome.
Click to expand...
Click to collapse
There was a few updates from themuppets that may have broken things
blueether said:
There was a few updates from themuppets that may have broken things
Click to expand...
Click to collapse
Good call! Thanks!
This is the commit that broke sensors for me. I'll try a CM11 nightly later and try to report the issue if it's present there.
Any chance that the sensors may be fixed soon? It's pretty inconvenient atm.
341464 said:
Any chance that the sensors may be fixed soon? It's pretty inconvenient atm.
Click to expand...
Click to collapse
I'm away for the weekend so cant look into it. My only suggestion is to roll back to the backup you made befor flashing or to flash an older build (if you flash an older build you will probably need to wipe data)
blueether said:
I'm away for the weekend so cant look into it. My only suggestion is to roll back to the backup you made befor flashing or to flash an older build (if you flash an older build you will probably need to wipe data)
Click to expand...
Click to collapse
I just got this device literally 12 hours ago, so no previous backup exists. Flashed Carbon immediately I got the device and probably chose a wrong time.
I can wait though, since I had spent hours setting the device up, don't really wanna do it all over again.
341464 said:
I just got this device literally 12 hours ago, so no previous backup exists. Flashed Carbon immediately I got the device and probably chose a wrong time.
I can wait though, since I had spent hours setting the device up, don't really wanna do it all over again.
Click to expand...
Click to collapse
Carbon build 32 should be fine (problem only with bluetooth) but build 30 and earlier is recommended if Bluetooth is a must.
I did dirty flash build 32 on top of build 33 and it somehow work, but not recommended
Hilmhaz said:
Carbon build 32 should be fine (problem only with bluetooth) but build 30 and earlier is recommended if Bluetooth is a must.
I did dirty flash build 32 on top of build 33 and it somehow work, but not recommended
Click to expand...
Click to collapse
I'd rather wait for a new build, unless it isn't fixed in 2 weeks.
EDIT: Actually, wait, can't I just replace the sec_config with the older one?
EDIT 2: Yup, fixed by replacing the sec_config with the older one.
No problem now.
Is there a way I can change how "exact" or sensitive dt2w is? I can only get it to work for me every other time...I don't know if I am tapping to far from the other tap or what...I swear I am tapping in the same spot twice
KaBooMa said:
Is there a way I can change how "exact" or sensitive dt2w is? I can only get it to work for me every other time...I don't know if I am tapping to far from the other tap or what...I swear I am tapping in the same spot twice
Click to expand...
Click to collapse
You cant change the way dt2w works sorry
Thanks for the reply. I have been sitting here training lol....I think I got it figured out finally. I was just doing some weird stuff and it wasn't working.
any updates?
This rom is rip?any information about next updates?
kowkin said:
This rom is rip?any information about next updates?
Click to expand...
Click to collapse
The Carbon team have mostly moved on to LP, i'm just waiting for it to build and boot cleanly then there will be a LP lelease
I'm struggling to fix my camera flashlight problem to no avail.
Back in the good old days of build 17.1.2.a.0.314 my flashlight would work flawless.
now adays with recent builds the flashlight can be ON but can't be turned OFF until reboot.
Is there a way to have old cam drivers back in my Z2 or a different solution?
I trust the xda community will help.
waiting for a fix or a hint
Thanks
fbxd said:
I'm struggling to fix my camera flashlight problem to no avail.
Back in the good old days of build 17.1.2.a.0.314 my flashlight would work flawless.
now adays with recent builds the flashlight can be ON but can't be turned OFF until reboot.
Is there a way to have old cam drivers back in my Z2 or a different solution?
I trust the xda community will help.
waiting for a fix or a hint
Thanks
Click to expand...
Click to collapse
I think this is a firmware issue which would be addressed by Sony themselves in next update. However, have you tried using any other camera app ?
Quote me in case you expect a reply!
Good Luck
Hnk1 said:
I think this is a firmware issue which would be addressed by Sony themselves in next update. However, have you tried using any other camera app ?
Quote me in case you expect a reply!
Good Luck
Click to expand...
Click to collapse
I feel like sony will never address this issue because it's not affecting all phones.
but i certainly hope they do
i have tried google camera and as soon as i tried taking a picture the flashlight was ON and stayed that way with no response at my attempts to turn it off.
tried in safe mode but no luck, i tried clean installs and what not but nothing works.
the only solution was a downgrade to firmware 17.1.2.A.0.314 which helped me conclude it's not a hardware issue.
thx for your help
fbxd said:
I feel like sony will never address this issue because it's not affecting all phones.
but i certainly hope they do
i have tried google camera and as soon as i tried taking a picture the flashlight was ON and stayed that way with no response at my attempts to turn it off.
tried in safe mode but no luck, i tried clean installs and what not but nothing works.
the only solution was a downgrade to firmware 17.1.2.A.0.314 which helped me conclude it's not a hardware issue.
thx for your help
Click to expand...
Click to collapse
I am afraid Sony is not very good with ironing out bugs and releases their builds prematurely. Have you tried any custom ROM by the way ?
Hnk1 said:
I am afraid Sony is not very good with ironing out bugs and releases their builds prematurely. Have you tried any custom ROM by the way ?
Click to expand...
Click to collapse
I have not tried any custom rom yet because i wanted to stick to stock only.
what would you recommend as a stable and bug free custom rom with quality camera app?
are there lollipop custom roms with perfect camera app and flashlight toggle?
thanks
fbxd said:
I have not tried any custom rom yet because i wanted to stick to stock only.
what would you recommend as a stable and bug free custom rom with quality camera app?
are there lollipop custom roms with perfect camera app and flashlight toggle?
thanks
Click to expand...
Click to collapse
Generally the stock provides the best camera quality in Sony mobiles, however, when they are buggy like in your case, you can try other roms like CM12.1 or AOSP or Pac man.
You will need an unlocked boot loader and some know how about flashtool for that.
Also, custom roms and kernels depend on user. Some user want performance but some like me want more battery life,and thus tweak our phones accordingly. Once you get used to custom roms, you hate stock. I move away from stock within 6 hours of a device's purchase. So it depends what you like. My personal favourites are mentioned above .
Quote me in case you expect an,answer
I'll try CM 12.1 and get back to you.
Thanks
Sent from my D6503 using XDA Free mobile app
Hnk1 said:
Generally the stock provides the best camera quality in Sony mobiles, however, when they are buggy like in your case, you can try other roms like CM12.1 or AOSP or Pac man.
You will need an unlocked boot loader and some know how about flashtool for that.
Also, custom roms and kernels depend on user. Some user want performance but some like me want more battery life,and thus tweak our phones accordingly. Once you get used to custom roms, you hate stock. I move away from stock within 6 hours of a device's purchase. So it depends what you like. My personal favourites are mentioned above .
Quote me in case you expect an,answer
Click to expand...
Click to collapse
hello dear friend
i've tried cm12.1 and am in love with it.
my flashlight works flawless and the google cam is really good!
thanks for your great help
Much appreciated
fbxd said:
hello dear friend
i've tried cm12.1 and am in love with it.
my flashlight works flawless and the google cam is really good!
thanks for your great help
Much appreciated
Click to expand...
Click to collapse
I'm glad I could be of help.
Show your appreciation by hitting thanks often!
Quote me next time in case you have a question again.
Hello guys...
Im using this version and is stable as daily drivers...
Sent to my drive :https://drive.google.com/file/d/0BxhXvaSNdFHDamFXRzRDcy1YZTQ/view?usp=docslist_api
Fixed sensores... Audio recording...video recording
Bluetooth is working too ...tethering as well ...
Im not the guy who build this... I cant remeber where i found this..
But im trying to fins again...
This build was baked in 10-28...
Using so far...
Ill appreciate if we find this good soul to thanks!!! Lol
You can use opengapps to install google apps.
Help me find any bugs and the developer...
Ow...sorry my version is redmi 2 pro (Brasil) ...but should work in all variantes.
Hope you love like im
Hope you hit thanks too ))
Edit.... Mega mirror https://mega.nz/#!aVQxXRxQ!t_oEGWa1S2vjVwgjI9nf6diUAxQWTrbKqhfGcs6taFI
What is the use of this thread? Isn't it a repeat of http://forum.xda-developers.com/android/development/-t3215182 , http://forum.xda-developers.com/android/development/redmi-2-cyanogenmod-12-1-t3189949
Nick... This is the first ROM YAS537 sensor works out of the box with me....i tried a lot of ROMs and like i said before... Could be used as a daily ... I believe this forum is for to all of US help each other... And... I just wanna help who whatever want
The same problem of other roms, continue with noise in the recordings.\
That's the rom : http://en.miui.com/thread-177918-1-1.html
rafael.fessel said:
Nick... This is the first ROM YAS537 sensor works out of the box with me....i tried a lot of ROMs and like i said before... Could be used as a daily ... I believe this forum is for to all of US help each other... And... I just wanna help who whatever want
Click to expand...
Click to collapse
I am now going to try on Redmi 2 Prime with YAS537 sensor, will update with review soon.
crzlloid said:
I am now going to try on Redmi 2 Prime with YAS537 sensor, will update with review soon.
Click to expand...
Click to collapse
I havê the pro version (i believe this is the same as prime but the name was changed because marketing stuff...brazil )
My only problemas so far is the audio recording...it works...but you van hear a noise in deep of recording ...
rafael.fessel said:
I havê the pro version (i believe this is the same as prime but the name was changed because marketing stuff...brazil )
My only problemas so far is the audio recording...it works...but you van hear a noise in deep of recording ...
Click to expand...
Click to collapse
Unfortunately my sensor is not working, maybe it's a device problem
Camera is laggy, and this is a EmfoxZhou build i believe from About section of the ROM
I couldn't test for other bugs, as I have limited time
YAS537 is impossible since no one fixed it yet.
I guess, unless Xiaomi releases the kernel, we won't be able to experience it completely, but do you think it will happen :/
MaxPresi said:
The same problem of other roms, continue with noise in the recordings.\
That's the rom : http://en.miui.com/thread-177918-1-1.html
Click to expand...
Click to collapse
it's look like the issue just same due to both use the same kernel.
http://forum.xda-developers.com/android/development/rom-t3215182
http://forum.xda-developers.com/android/development/redmi-2-cyanogenmod-12-1-t3189949
xiaomi not release the kernel source yet (maybe not at all http://chn.ge/1kmF4l6)
use GOD's kernel and the audio and sensors problem get fixed.....
saurabh1234 said:
use GOD's kernel and the audio and sensors problem get fixed.....
Click to expand...
Click to collapse
No, the kernel does not solve the problem of sound recording.
Update 19/09/16
ok people new update out, fairly minor changes here.
Changelog
Code:
Updated Kernel with some changes to help aid performance, enabled F2FS data mount support also.
Changed few minor things in rom - device identifies itself as a Galaxy S5 Mini currently as i try to sort out NFC.
Updated kernel included in recovery to allow F2FS formatting to work
performance seems to be noticeably improved but is still not perfect but i am still investigating
known problems
Code:
Flashlight does not work
Camera Autofocus can be a bit slow
Secure Lockscreen not working currently
Download Link: Mod edit : Link Removed
any bug reports welcome people.
--------------------------------------------------------------------------
ok folks, been keeping this one quite quiet but have been working on it for a bit alongside the cm13 port ive already posted about.
this rom is based on samsungs stock 6.0.1 for the J500F and has had no major changes except for stripping a few bloat apps.
the kernel on the other hand is completely different to stock and is based on my current DMPKern for the j500f but has been modified to allow it to boot on the FN model,
so you have all the features of my custom kernel aswell as 6.0 os
link below, i have tested this for a bit and it seems to be working ok including audio etc,
it does sometimes lag a little especially with graphics work as one of the major changes to the kernel is in relation to the drivers for graphics and display.
calls and messages seem to work fine,
other testers are always welcome though
Download link: Mod edit : Link Removed
DJ_Steve said:
ok folks, been keeping this one quite quiet but have been working on it for a bit alongside the cm13 port ive already posted about.
this rom is based on samsungs stock 6.0.1 for the J500F and has had no major changes except for stripping a few bloat apps.
the kernel on the other hand is completely different to stock and is based on my current DMPKern for the j500f but has been modified to allow it to boot on the FN model,
so you have all the features of my custom kernel aswell as 6.0 os
link below, i have tested this for a bit and it seems to be working ok including audio etc,
it does sometimes lag a little especially with graphics work as one of the major changes to the kernel is in relation to the drivers for graphics and display.
calls and messages seem to work fine,
other testers are always welcome though
Download link: http://downloads.dmpwap.xyz/J5/roms/J5FN-samstock-15-09-2016.zip
Click to expand...
Click to collapse
I'm not playing much heavy games on my phones. But can I watch YouTube with no problem? Couse I'm a bit addicted to it:silly:
paulo boë said:
I'm not playing much heavy games on my phones. But can I watch YouTube with no problem? Couse I'm a bit addicted to it:silly:
Click to expand...
Click to collapse
yep youtube is fine, just tried a 720p video and it worked fine, camera also works here too
DJ_Steve said:
yep youtube is fine, just tried a 720p video and it worked fine, camera also works here too
Click to expand...
Click to collapse
I'll test tomorrow. I'm going to sleep now
Installation failed with "updater process ended with error: 6"
chello83 said:
Installation failed with "updater process ended with error: 6"
Click to expand...
Click to collapse
That error Will be fixed soon i messed up a Line in the update script. Will be uploading a corrected one soon
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
new zip up which should fix the error flashing it, same link
This is so f*cking cooooooooollllllllll!!!!!!!!!!!!!!!!!!!!!!!!!
Glad you like it
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
Lol wtf
hail to dj_steve
H3XabyT3LV said:
Lol wtf
hail to dj_steve
Click to expand...
Click to collapse
Not sure how to take the first part of that
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
DJ_Steve said:
Not sure how to take the first part of that
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
Click to expand...
Click to collapse
nevermind but dude great job! now focus on cm13 for fn xd
Thank you!
Thank you sir!
Using the rom right now, quite usable for a Beta! for sure it needs optimisation and some fixes but everything is just working! thanks for bringing MM on our device.
For the moment main issue I have is freeze of system.ui during some seconds, & few lags sometimes
And please, guys, don't tell the devs what to do, they're not working for you! or at least , you can be polite!!
abaithad said:
Thank you sir!
Using the rom right now, quite usable for an alpha! for sure it needs optimisation and some fixes but everything is just working! thanks for bringing MM on our device
And please, guys, don't tell the devs what to do, they're not working for you! or at least , you can be polite!!
Click to expand...
Click to collapse
Its all good i dont think the previous poster was trying to be nasty . Any suggestions or bug reports are welcome
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
Great job man as always!
It seems that the camera flash is not working properly. I think that's all I've found so far. But rreally amazing work! Thank you for beeing awesome!
erik96joe said:
Great job man as always!
It seems that the camera flash is not working properly. I think that's all I've found so far. But rreally amazing work! Thank you for beeing awesome!
Click to expand...
Click to collapse
Hmm flash i shall investigate think i know the issue with that
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
Don't know if its for a reason. But there is no Super Su root apk....
paulo boë said:
Don't know if its for a reason. But there is no Super Su root apk....
Click to expand...
Click to collapse
Because its not rooted install supersu2.78 zip
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
DJ_Steve said:
Because its not rooted install supersu2.78 zip
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use
Click to expand...
Click to collapse
Can you give my a link?
paulo boë said:
Can you give my a link?
Click to expand...
Click to collapse
Search xda its here somewhere
Sent From my Galaxy J5(J500FN) which thinks its a Galaxy S5 Mini for galaxy gear use