Module hides safe volume warning. Tested and worked on many devices. It should work for every device with Android 4.2 and newer.
Download it in Xposed repo:
http://repo.xposed.info/module/com.pyler.nosafevolumewarning
Not working on Note 2 with 4.4.2 leak rom.
Sent from my GT-N7100 using Tapatalk
try new version! it should work for all now!
pyler said:
try new version! it should work for all now!
Click to expand...
Click to collapse
Hi! I'm using the latest version on ZTE Grand X In, but it has no effect, it doesn't work. Android 4.0.4 modded stock ROM, x86.
Works on my Samsung device with 4.2.2 and Nexus 7 with 4.4.2. You need ROM close to AOSP. ZTE probably did some changes here.
pyler said:
try new version! it should work for all now!
Click to expand...
Click to collapse
New version woking....with Note 4.4.2 Rom....
Good Job....
Sent from my GT-N7100 using Tapatalk
Doesn't work on Huawei G740 with 4.1.2, rooted stock ROM
Sent from Tapatalk 4.4
Yes, then No?
Note II, rooted stock 4.1.2. Interestingly, it worked… then it didn't. I tested it right after installing/activating it (just by playing a vid and cranking the volume up past the point the message normally appears) and there was no message. Satisfied, I forgot about it 'til the next day… at which point I started getting the message again.
I'm gonna uninstall the module tonight, reboot, reinstall, reboot twice, and see what's what, after which I'll probably update this post. I hope it works because that message is QUITE annoying.
EDIT
Did the above: uninstall, reboot, reinstall, activate, reboot twice, try it out and… it worked. But then the next day (today) I tried it out again AND… it still works. So don't know what happened that first time. I supposed it's not impossible for the same thing to happen again at some point, but it looks fine for now.
GuccizBud said:
Note II, rooted stock 4.1.2. Interestingly, it worked… then it didn't. I tested it right after installing/activating it (just by playing a vid and cranking the volume up past the point the message normally appears) and there was no message. Satisfied, I forgot about it 'til the next day… at which point I started getting the message again.
I'm gonna uninstall the module tonight, reboot, reinstall, reboot twice, and see what's what, after which I'll probably update this post. I hope it works because that message is QUITE annoying.
EDIT
Did the above: uninstall, reboot, reinstall, activate, reboot twice, try it out and… it worked. But then the next day (today) I tried it out again AND… it still works. So don't know what happened that first time. I supposed it's not impossible for the same thing to happen again at some point, but it looks fine for now.
Click to expand...
Click to collapse
*** UPDATE 2014 July 1 ***
Either two or three days after the above EDIT, which was when I had reinstalled the module and it was working, it stopped working again. In the end the only difference between this second time and the first time is the time it took to revert : 2–3 days this time, 1 day ( i.e. the very next day ) last time.
Here's something that's maybe interesting though. I knew from the last time that if I uninstalled, then reinstalled, it would begin working again, so I tried something else : simply deactivating then reactivating the module in Xposed installer, with reboots in between … and it worked.
I don't know if that last point tells Xposed-savvy devs and users anything useful, but in the meantime, and in the interest of minimizing the time (number of steps) to get it working again when it does die, I'll try seeing what the fewest number of reboots is to do that. Just now when it worked there were 3 reboots, which is too many to consider doing it that way if a permanent solution isn't found. I did this :
• deactivate module in Xposed
• reboot ①
• reactivate module in Xposed
• reboot ②
• reboot ③
I'll try eliminating ③ first because I expect it to be the least significant one, then see if it works if I skip ①, and finally ②, which I expect is the most significant/least expendable reboot. Damn good thing this phone reboots pretty fast.
So did it work?
Released v1.6. It should work on all devices with Android 4.2 and newer.
thank i need it
pyler said:
Module hides safe volume warning. Tested and worked on many devices. It should work for every device with Android 4.2 and newer.
Download it in Xposed repo:
http://repo.xposed.info/module/com.pyler.nosafevolumewarning
Click to expand...
Click to collapse
Good work
Can you add the compatibility ROMs please ?
Thanks :good:
Rom said:
Good work
Can you add the compatibility ROMs please ?
Thanks :good:
Click to expand...
Click to collapse
Should support any 4.2+ rom.
pyler said:
Should support any 4.2+ rom.
Click to expand...
Click to collapse
Ok thanks but any 4.2 ROM ? Cyanogen and others ?
Rom said:
Ok thanks but any 4.2 ROM ? Cyanogen and others ?
Click to expand...
Click to collapse
CyanogenMod has already option for it in Settings. No need any mods.
pyler said:
CyanogenMod has already option for it in Settings. No need any mods.
Click to expand...
Click to collapse
Yes but i have say it same an exemple... Because others customs and pre-rooted ROM not have this feature..
So you don't know exactly on what ROM you app work ?
Is there a version for 4.1?
Rom said:
Yes but i have say it same an exemple... Because others customs and pre-rooted ROM not have this feature..
So you don't know exactly on what ROM you app work ?
Click to expand...
Click to collapse
I wrote it. For all 4.2 and newer. I tested it on Nexus and Samsung with stock roms and all work. But of course I cant test it on every ROM on every device. So please stop asking about "supported roms" in this thread. Try it first.
4.1? No. AFAIK safe volume warning was introduced in 4.2.
pyler said:
I wrote it. For all 4.2 and newer. I tested it on Nexus and Samsung with stock roms and all work. But of course I cant test it on every ROM on every device. So please stop asking about "supported roms" in this thread. Try it first.
4.1? No. AFAIK safe volume warning was introduced in 4.2.
Click to expand...
Click to collapse
Ok ok.
Related
Steps:
Download Mokee.zip
Download Gapps (optional)
Place Candy5.zip on phones memory or SD card
Boot into recovery (USE MY TWRP (ONLY) in second post or CWM if it's been updated)
FULL wipe! (Dalvik Cache, Cache, System, Factory Data Reset)
Flash Mokee.zip
Boot into system
Flash Gapps
Reboot and Enjoi
Please give first boot a good few minutes.
This is Mokee OpenSource, expect the same issues as in my other roms!
DOWNLOADS
MOKEE_QUINCYATT
* Gapps
Or use 5.0.0 Gapps of choice
XDA:DevDB Information
Mokee Android 5.1, ROM for the AT&T Samsung Galaxy Note I717
Contributors
gimmeitorilltell
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MODEM UCMD3
Based On: Cyanogenmod, AOSP
Version Information
Status: Beta
Created 2015-03-20
Last Updated 2015-04-09
Reserved
USE_ONLY_THIS_UNOFFICIAL_TWRP!!!!!
TWRP 2.8.3.0
CHANGELOG
03/10/15
[*]Fixed charging while off!
[*]Added charge percentage while off!
[*]Broke MTP! Seems to be working now!
[*]Updated to our latest source!
[*]Added BLN controls
[*]Added Fast Charge!
5.1 already? Thanks!
Sent from my SGH-I777 using XDA Premium 4 mobile app
OP for this thread has a cut/paste with Candy5 rather than Mokee.
Superb
Been using this for the past 10 hrs, everything seems to be great. :good:
Looking forward for 5.1
Flashed this am and good so far...the setup wizard was a little wonky but I got thru it eventually. Seems a bit laggy so I will try and tweak goverenor and gpu. @gimmeitorilltell, do all of your LP builds have the same kernel setup?
Dannoid said:
OP for this thread has a cut/paste with Candy5 rather than Mokee.
Click to expand...
Click to collapse
Haha thank you, I didn't pay attention when I c&p it.
erad1 said:
Flashed this am and good so far...the setup wizard was a little wonky but I got thru it eventually. Seems a bit laggy so I will try and tweak goverenor and gpu. @gimmeitorilltell, do all of your LP builds have the same kernel setup?
Click to expand...
Click to collapse
Yeah I had some issues with the setup also and yes I'm using the same kernel for all my builds. Also with the next Mokee build I will remove some of the apps.
erad1 said:
Flashed this am and good so far...the setup wizard was a little wonky but I got thru it eventually. Seems a bit laggy so I will try and tweak goverenor and gpu. @gimmeitorilltell, do all of your LP builds have the same kernel setup?
Click to expand...
Click to collapse
I downloaded this app called Kernel Adiutor, you should check it out ?
Bug Update on this rom
Im getting random reboots 3 times a day and play store isnt updating, I have to stay in the play store for it to update. But other than that everything seems fine. !!! :good: Hope to see multirom support with all your rom builds in the feature https://github.com/Tasssadar/MultiROMMgr
TeamAndroid14 said:
Im getting random reboots 3 times a day and play store isnt updating, I have to stay in the play store for it to update. But other than that everything seems fine. !!! :good: Hope to see multirom support with all your rom builds in the feature https://github.com/Tasssadar/MultiROMMgr
Click to expand...
Click to collapse
I noticed these as well as well as fc with audiofx. However gyroscope was working on this ROM.
Sent from my SAMSUNG-SGH-I717
developweb said:
I noticed these as well as well as fc with audiofx. However gyroscope was working on this ROM.
Sent from my SAMSUNG-SGH-I717
Click to expand...
Click to collapse
Yeah same I actually had to delete the AudioFx and download Viper4Android.
Hi, I would like to know if this can be rooted. I installed a root checked and it says it is not rooted. Can someone help me out on this???
Thanks....
mikelodeon13 said:
Hi, I would like to know if this can be rooted. I installed a root checked and it says it is not rooted. Can someone help me out on this???
Thanks....
Click to expand...
Click to collapse
It is rooted. You need to enable developer settings and enable it. Go to "settings/about phone" tap the "Build number" 7 times. Go back one page to find & open dev settings & enable root!
Thanks
gimmeitorilltell said:
It is rooted. You need to enable developer settings and enable it. Go to "settings/about phone" tap the "Build number" 7 times. Go back one page to find & open dev settings & enable root!
Click to expand...
Click to collapse
Thanks a lot it worked.
NEW BUILD
mikelodeon13 said:
Thanks a lot it worked.
Click to expand...
Click to collapse
No prob but remember to use the thanks button please?
NEW BUILD MOKEE 5.1 fresh out the oven!!! Link is in the OP!!!! ENJOY!
Give this some time to flash as it takes a few minutes, it's not stuck!!!
gimmeitorilltell said:
No prob but remember to use the thanks button please?
NEW BUILD MOKEE 5.1 fresh out the oven!!! Link is in the OP!!!! ENJOY!
Give this some time to flash as it takes a few minutes, it's not stuck!!!
Click to expand...
Click to collapse
You're right, it does take a while!!! Pretty nice. Used CWM with Broken 5.1 gapps.
Sent from my SAMSUNG-SGH-I717 using XDA Free mobile app
gimmeitorilltell said:
No prob but remember to use the thanks button please?
NEW BUILD MOKEE 5.1 fresh out the oven!!! Link is in the OP!!!! ENJOY!
Give this some time to flash as it takes a few minutes, it's not stuck!!!
Click to expand...
Click to collapse
Woww, 5.1 already ? lol, Thanks brother , I wanna report some bugs to you.
Play store isnt updating in background, some of the apps force closes. Im not sure if its me, I'll probably try it again with a different 5.1 gapps.
Connecting to the computer is an issue, its probably known.
Baseband: I see the baseband number but wont be able to verify because im not in Toronto, Canada, im in London England for 1 week.
Wifi: working
Keyboard: Working (finally) , (Used to be an issue when it randomly closes in 5.0 builds ).
But other than that everything seems to be working fine and smooth.
Great build brother.
EOS Mokee
I will no longer be maintaining this rom and my last posted build is just that! If anyone would like to take over this thread please contact me? I wanted as many 5.0 roms available for this device as possible. Now I'll concentrate on building better roms that I will support, and some new roms for this device as well.
gimmeitorilltell said:
I will no longer be maintaining this rom and my last posted build is just that! If anyone would like to take over this thread please contact me? I wanted as many 5.0 roms available for this device as possible. Now I'll concentrate on building better roms that I will support, and some new roms for this device as well.
Click to expand...
Click to collapse
This bricked my microwave!!!!, eta on a fixed build?! :silly:
Props on keeping the device alive this long, I remember hitting the bump of trying to keep to many builds going and not being able to concentrate on stability, it's always best to cut off some of the work load.
JamieD81 said:
This bricked my microwave!!!!, eta on a fixed build?! :silly:
Props on keeping the device alive this long, I remember hitting the bump of trying to keep to many builds going and not being able to concentrate on stability, it's always best to cut off some of the work load.
Click to expand...
Click to collapse
I didn't know you had microwaves in Canada!!
Sent from my Nexus 6 using XDA Premium 4 mobile app
Deleted
Reserved
Reserved 2
The point of there being a thread is to gain suggestions, and improvements from the users.
Not for bug reports.
Its to further development ONLY
This rom seems awesome. Don't know if you already have done this but here's a little suggestion or a feature request. Lockscreen blur:
http://gerrit.aicp-rom.com/#/c/18133/
http://gerrit.aicp-rom.com/#/c/18130/
Do you think it would be possible to implement?
Arju007 said:
This rom seems awesome. Don't know if you already have done this but here's a little suggestion or a feature request. Lockscreen blur:
http://gerrit.aicp-rom.com/#/c/18133/
http://gerrit.aicp-rom.com/#/c/18130/
Do you think it would be possible to implement?
Click to expand...
Click to collapse
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
ZX64 said:
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
Click to expand...
Click to collapse
Awesome, thank you! I'm out of thanks today, will push the thanks button tomorrow
Arju007 said:
Awesome, thank you! I'm out of thanks today, will push the thanks button tomorrow
Click to expand...
Click to collapse
Well I appreciate the share. I've been looking for that and a fix for maxxaudio so it recognizes the source output correctly in cm13.
ZX64 said:
The Original UnityROM-4.
The point of this ROM is to build a smoother, more optimized version of CM, with as much COS flavor as possible.
Features:
CM13 pure source.
COS features (as many as possible)(Cortana, MaxxAudio, Snapdragon Browser, GalleryNext, Theme Chooser/Store, and TrueCaller)
Fully Odexed.
Full OTA.
UberTC compilation. (Thanks to @varund7726)
Signal hack (thanks to @Sultanxda)
OTA updating (thanks to @Sultanxda)
Revamped kernel (thanks to @Captain_Throwback & @varund7726)
AdAway 3.1.
Kernel Auditor.
OppoCam & plugins.
Minimal Gapps.
Increased WiFi scan interval (saves battery)
SELinux status set to permissive.
Note:
I am not very skilled. I just used a guide or two to get this building. And the help of quite a few others to bring the ROM where it is.
This is a Full OTA ROM. No gapps needed.
DO NOT REPORT BUGS.
This is based off of CM sources, which is not anywhere near "stable" yet.
If you have a fix, or constructive suggestion. Provide all details in a PM.
ROM Link: (4.12-V7) https://www.androidfilehost.com/?fid=24352994023706706
Source Link: https://github.com/LiquidSmokeX64/android
Kernel Source: https://github.com/LiquidSmokeX64/android_kernel_one plus_msm8974
Click to expand...
Click to collapse
Nice to go on . Wellcome back!
Sorry about the derp. I accidentally made calendar remove itself lol.
Will be fixed next release
ZX64 said:
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
Click to expand...
Click to collapse
Discovered I can't use that because it requires the Aicp_extras repo and I don't really support use of any non cm repos besides UBERTC toolchains of course
So, some time in the last two days somewhere between v4 - v7 my status bar stopped working with quick pulldown and notifications seem to not be appearing for background apps.
Edit: wiped system and reflashed, issue has been resolved
4.13 is up. Derp fixed, updated the firmwares. The assert check may fail. If so, follow the steps to installing Sultanxda's cm13 ROM. Twrp 2.8.7.0 doesn't write firmwares correctly, and 2.8.6.0 is needed. And is in the ROM.zip just in case.
4.13.1 posted. Few more fixes. LaunchAnyApp Mod integrated.
Gapps reworked. No more integrated Google search app. Mostly because it messes with the lock screen shortcuts.
SetupWizard might crash. But its nothing to worry about. I'll try to get that fixed next update
Edit.
Reuploaded an alternate 4.13.1. Now It's as close to an Unofficial CyanogenOS 13 as I can get it. With the normal UR4 stuff of course. Enjoy.
Also all Google Apps are intact as of now.
can i flash it with twrp 2.8.10 bro? using clean flash ?
rendiipratama said:
can i flash it with twrp 2.8.10 bro? using clean flash ?
Click to expand...
Click to collapse
wouldn't do that. Didn't install completely, system launched but no gapps availabe. Couldn't boot anymore in recovery. Had to install twrp 2.8.6.0 manually via laptop and fastboot. Rebooted into recovery (this time 2.8.6.0), installed the rom without errors, rebooted and google play services is just crashing permanently... Originally came from a fully working (ok two random reboots per day) from unity 4.10..... I really hate marshmallow, seems like no one can feature a working, stable and battery friendly rom. You update your rom, you get ****ed (seems like it will be my fourth clean install in marshmallow)...
solidsnew said:
wouldn't do that. Didn't install completely, system launched but no gapps availabe. Couldn't boot anymore in recovery. Had to install twrp 2.8.6.0 manually via laptop and fastboot. Rebooted into recovery (this time 2.8.6.0), installed the rom without errors, rebooted and google play services is just crashing permanently... Originally came from a fully working (ok two random reboots per day) from unity 4.10..... I really hate marshmallow, seems like no one can feature a working, stable and battery friendly rom. You update your rom, you get ****ed (seems like it will be my fourth clean install in marshmallow)...
Click to expand...
Click to collapse
so, i must bring twrp to 2.8.6.0, flash it via pc? ok, i'll do it. thx @solidsnew
rendiipratama said:
so, i must bring twrp to 2.8.6.0, flash it via pc? ok, i'll do it. thx @solidsnew
Click to expand...
Click to collapse
seems like that. But OP states it will install automatically... Just install twrp 2.8.6.0 via laptop and you should be safe.... And I do a clean install since I only get "setup assistant crashed" over and over and over.... I HATE IT!
solidsnew said:
seems like that. But OP states it will install automatically... Just install twrp 2.8.6.0 via laptop and you should be safe.... And I do a clean install since I only get "setup assistant crashed" over and over and over.... I HATE IT!
Click to expand...
Click to collapse
in xda share oneplus toolkit, and the toolkit when i running instal Costom recovery will instal twrp 2.8.6.0. too, can work with that software, i'm sorry my english so bad my bro
I state setup wizard crashes. It's because of the LaunchAnyApp gestures.
I contacted the creator for a fix. Calm down. It's nothing to worry about
Delete.
Congratulations man. Its great team to be in.
Device: G928C
Rom: CyanogenMod 13
Kernel: Mynogen
Congratulations ,well done job
Interesting , ?
Camera doesn't work.
Well done
Sent from my SM-N920T using XDA-Developers mobile app
lkiiii said:
Camera doesn't work.
Click to expand...
Click to collapse
What kernel did you flash with it?
Milly7 said:
What kernel did you flash with it?
Click to expand...
Click to collapse
Doesn't matter the camera just doesn't work yet
Sorry fellas. Just waiting for a friend who helps me with the building. Camera doesn't work but that is definitely on the list.
Thanks and sorry for the wait. Soon as I get the clear, I'll update OP.
Thank you so much, will report back as soon as done.
I'm happy I finally got to install, Nor audio calls neither Soft keys, text messages are working same as data, youtube, music, chrome, this a good beginning.
I installed the version 3 from the link given (S6 Edge +)
Thank you again.
Thank you so much for your Note 5 support
Updated OP guys.
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
rudeboy87 said:
hey I downloaded a cm rom from the sprint note 5 section and tried your kernel. I got about 2 to 3 reboots and then it stops. my data is also not working. can you help
Click to expand...
Click to collapse
Hello and thanks for trying.. So it eventually booted? Supesu can cause those kind of reboots while it sets up. . The cm was was made for Tmobile and international.. You could try to make sure apn is right and change your data connection. Like from 4g to 3g. Sometimes that triggers it. And what modem are you using?
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
rudeboy87 said:
not sure what modem I'm using. Can you point me to one that may fix the issue? also I downloaded the rom you mentioned in the op and it booted with no reboots with your kernel. Reboots happen when I use a cm rom from the sprint side
Click to expand...
Click to collapse
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
LiL_Assassin said:
Then it would probably be due to the sprint CyanogenMod. I can't tell you how stable they are as I have an SM-N920I.. But if you tried the other Cm. Do you get data?
Click to expand...
Click to collapse
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
rudeboy87 said:
no I didn't get data at all. tried to enable it in rom but it wont work. maybe its on my end
Click to expand...
Click to collapse
Try checking your apns and that they are correct. And changing.. If that doesn't work.. It might because of sprint device. Fingers crossed.
LiL_Assassin said:
Hello guys! After a few months I decided to look into building a CyanogenMod Kernel for our beloved Note 5.
It is very much a work in progress and any issues should be reported here, please make any backup efs back ups, and nandroids
Link to download cm13 by rainbow dash. Please download this first and then download this kernel... As that is what I am using as my daily driver and if you have random reboots there are ways to fix that. Just report what is making you reboot and I will help you as much as I can. It is still a very beta build!
http://forum.xda-developers.com/s6-edge-plus/orig-development/cyanogenmod-13-unofficial-t3384252
Camera doesn't work.
Some apps don't work unless you personally remove it's libs and stop them from generating. (eg chomp sms on message send)
Source code: https://drive.google.com/file/d/0B8Ps-jVB8IblU0xRWTZUdDlMZ3c/view?usp=docslist_api
Credits @Konsstantine34 @Rainbow_Dash @UpInTheAir (a huge mentor and alot of respect) @A Close friend. @RaymanFX for his first build of cm13 for our device.
[UPDATE!] Due to unforeseen things. I must upload it as a boot.img download it and flash it via twrp and make sure to be able to view Img. Update will soon follow with a proper zip. Please make a backup and report back, any issues. Camera still does not work! Report back with any other issues! Or reboots.
https://www.dropbox.com/sh/7f7979c3fiq4016/AAAPgzCwjArGBd67TV8b3wMHa?dl=0
Click to expand...
Click to collapse
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
CHE1 said:
How can I flash your boot file. When I click install twrp doesn't see the .IMG extension.
Click to expand...
Click to collapse
In install menu select install image(right side) then select img then tick boot and swipe to install. When installing zips select install zip back again
Or install an app called flashify and select that img as kernel and flash
Official Cyanogenmod 14.1 Motorola athene Released for Moto G4/G4 Plus.Find the below link for Download.
https://download.cyanogenmod.org/?device=athene
stkpxl said:
Yay! Guessing you need the latest soak test modem and bootloader to install though?
Click to expand...
Click to collapse
That's a negative. My understanding is the soak test is needed in the plus because of finger print scanner issues. I have the XT1625 and it runs great without the soak test. Flash the quark kernel too. Waaaaaay better benchmark results.
stkpxl said:
I just installed it. Definitely didn't need the soak test. VoLTE works too when I called my voicemail to check. No crash on the Gallery app either like I've seen reported. And the best part for me is that Republic Wireless works with it and the app works too! Usually they don't support custom ROMs but this time everything works.
Click to expand...
Click to collapse
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
I've just rooted my phone, I'm in 6.0.1, I just need to download and put this in SdCard, later Install w/o gapps and it will works?
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
mikemelbrooks said:
I flashed the ROM and wiped and then flashed gapps, gallery is crashing for me.
Click to expand...
Click to collapse
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Mexickano said:
Same here, issues with gallery, I couldnt install Gapps, I got error code 20.
Click to expand...
Click to collapse
Were you trying to install the arm64 gapps? I could only install the arm gapps.
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Running 12222016 as of this morning. Have been using it since it first hit the streets. Seems a little unstable. While it's running, it runs great. However, for no apparent reason it reboots my device. I can't seem to pinpoint the cause as it happens sporadically and randomly.
I noted that the blue light filter "sort of" works. It has to be manually activated. Tried the automatic route but it's hit or miss.
hooks024 said:
Glad to hear you're all set up. Try quark kernel when you get a chance. Makes sure you get 2.0,because the other ones caused a boot loop for me.
Click to expand...
Click to collapse
That would be because the "other ones" are for MM based ROM's and 2.0/2.2 are for Nougat.
mikemelbrooks said:
I updated to the last nightly build which seems to have fixed the gallery bug for me, but now the camera can't access the sdcard to save pictures or videos when the card is set as internal.
Click to expand...
Click to collapse
Fixed the camera by clearing the camera data and cache!
chrisjwild said:
Were you trying to install the arm64 gapps? I could only install the arm gapps.
Click to expand...
Click to collapse
Im a dumb, I was installing other gapps, now Im not getting any issue, only about video recording but I'll fix it flashing a boot.img.
Thanks to all.
I always install ROM boot it then go to browser and search Gapps it automatically finds the one I need then just download and reboot to recovery and install so I don't have any issues the Roms are all comparable for bothering devices but I think arm is different between devices if that helps anybody
:crying: Sad News Guys Cyanogen is shutting down all its services from 31st Dec 2016.
But
http://lineageos.org/
Hi,
I bought a Moto G4 for Christmas. I'll receive it tomorrow, and so I'm looking for a good custom rom. I had the Moto G 2014 LTE (thea) running CM14.1. I notice that the last CM build available for athene is the 20161225, and I'd like to know if it's stable. Does it have an option to make volume buttons control media volume instead of ringtone, for instance ?
Thank you, 'n have a nice day !
Yo is cm 14.1 gonna get xposed
I installed the CM 14.1 12/25 nightly on a XT1625 motoG4 non-plus. Upon reboot, the OS asked me to input my password. It was unable to decrypt my data.
I had a pattern PIN, so I looked up the proper numeric sequence and entered it, and the OS told me "my password was correct but the data was corrupt" and suggested I wipe my phone.
I tried this several times with different passwords, and even with completely incorrect passwords it said it was correct but the data corrupt. So I had to wipe my data. After wiping data, nougat 7.1 came up fine.
Note I have a SDcard set as adaptable storage. My guess (and it is only a guess) is this is what screwed me over.
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
slatteew said:
Has anyone been using this for a while? I know it's nightly, but just curious if it's mostly usable. Would like to get off MM and tired of waiting for Official Nougat
Click to expand...
Click to collapse
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
yakzockt said:
You can use the latest official version of CyanogenMod. So far I had neither bugs nor crashes. The last version is cm-14.1-20161225-NIGHTLY-athene.zip
Otherwise, you can also use the official soak test from Motorola. This is also based on Anroid 7.0
Click to expand...
Click to collapse
Thanks! I found the latest Nightly and also an updated LineageOS (replacement for Cyanogen since they've stopped) version, might try them both out. I was perusing the Soak Test and saw it doesn't work with XT1625 devices unfortunately. I have the XT1625 non-Amazon version with Republic Wireless. Saw someone posted earlier in this thread that Republic Wireless was working fine on CM 14.1 Nightly, so that gave me some incentive as well.
Let us Discuss:
DL links atm:
AOSPA.co Official Download Website
PA Official Mirror Link
Arter97 Mirror Link
Gapps (Optional)
Beans' Gapps
Open Gapps
Paranoid Android Google+
Overall still skeptical about this because of the developments before being left out.
Anyway, what are your thoughts?
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
seangeezy12 said:
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
Click to expand...
Click to collapse
Will you report here? if so, consider this a subscription!
Used PA a few times in the past and it has always been one of the smoothest and best running roms for me, so i'm very interested!
knevelsg-j said:
Will you report here? if so, consider this a subscription!
Used PA a few times in the past and it has always been one of the smoothest and best running roms for me, so i'm very interested!
Click to expand...
Click to collapse
Will do !!
seangeezy12 said:
i ran a version of this...i think it was the DEV version...i like it...ive always like PA. im gonnna flash this in a few and report....
Click to expand...
Click to collapse
The real problem about it is the updates... will it be supported continuously or just 1 month. Considering PA's track records I doubt they will be able to sustain it for long. But I still have my fingers crossed.. Can you please do me a favor and install the HDLR camera zip found in the themes and apps forum in n6p and check if it works? if it does I will be flashing PA right away.
Also @seangeezy122 please do check the kernel and grab a couple of screenies
Thx for the info & links, downloading
Just one question : are gapps included? or should I flash theme?
oussamalabbize said:
Thx for the info & links, downloading
Just one question : are gapps are included? or should I flash theme?
Click to expand...
Click to collapse
It is recommended to flash gapps :good:
phantom146 said:
It is recommended to flash gapps :good:
Click to expand...
Click to collapse
Ok, thx
Are links working mine keeps saying pending?
**ignore**
@chadouming cant wait till you get your hands on their source!
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
it is encrypted or not?
dwxvi said:
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
Click to expand...
Click to collapse
I used beans and it work fine.
It's not on the may updates yet though
dwxvi said:
I'm kinda sad. I've downloaded the rom twice now, and I've been clean flashing it, but my Nexus 6P boots up and then shortly freezes at the setup screen and reboots. It does this continuously. I'm using the latest BeansGapps, if that helps.
EDIT: I flashed just the ROM without Gapps and it works. Maybe my BeansGapps are corrupt and need to be re-downloaded. I'll give it a try.
EDIT 2: Okay, this ROM doesn't like BeansGapps. It restarted once, but it's chugging along the setup process just fine now.
Click to expand...
Click to collapse
No issues with BeansGapps, worked fine from the get go.
So far so good, no issues at least. Will play around for the rest of the day and see how real world usage goes.
galakanokis said:
No issues with BeansGapps, worked fine from the get go.
So far so good, no issues at least. Will play around for the rest of the day and see how real world usage goes.
Click to expand...
Click to collapse
did you use the full or mini gapps package
Flashed the rom with openGapps stock package, working fine for the moment. Looks promising but lacks extra features that other roms such as pure and RR have like hold power for flashlight and down right clear all button.
The MD5 hash for the rom file is CE696A1C396864B23F40A37CF9A4C5D6 if anyone is wondering.
troon95 said:
Flashed the rom with openGapps stock package, working fine for the moment. Looks promising but lacks extra features that other roms such as pure and RR have like hold power for flashlight and down right clear all button.
The MD5 hash for the rom file is CE696A1C396864B23F40A37CF9A4C5D6 if anyone is wondering.
Click to expand...
Click to collapse
Ever since MM PA isnt really about the features but more on the smooth side of the UI and a small handpicked own festures. Thats why before on MM I used some xposed modules to incorporate those small features I miss. Though this lack of features shouldn't be a bother to minimalists like me.
Which gapps beans or banks or open?
And which versions for vendor n2g470?
And where's the official page... Google+?
Flashed...magisk working with safety net