Please help.My micromax A116 not charging while swichted on.If i Swiched off than connect charger it charges perfactly .All usb function ie otg drive otg mouse working perfactly.Even I flashed it with stock rom,calibrate battery flash other rom .But still it is not charging while it is on .So every tome it discharged I have to switc it off than charge in same switch off mode.Even i give it to the mobile service center they told there is no fault in board neither in battery.
Same problem
vicky4india said:
Please help.My micromax A116 not charging while swichted on.If i Swiched off than connect charger it charges perfactly .All usb function ie otg drive otg mouse working perfactly.Even I flashed it with stock rom,calibrate battery flash other rom .But still it is not charging while it is on .So every tome it discharged I have to switc it off than charge in same switch off mode.Even i give it to the mobile service center they told there is no fault in board neither in battery.
Click to expand...
Click to collapse
Have you fix your phone. Please share if did. I also have the same problem with my phone. I think it is happen when i calibrating my battery.
Guilaz said:
Have you fix your phone. Please share if did. I also have the same problem with my phone. I think it is happen when i calibrating my battery.
Click to expand...
Click to collapse
no i am also waiting for help.second i wish to mention its happen when i flash doge rom and suggested karnel.:crying:
A software problem
vicky4india said:
no i am also waiting for help.second i wish to mention its happen when i flash doge rom and suggested karnel.:crying:
Click to expand...
Click to collapse
If the phone charges while switched off there is no hardware problem whatsoever. It's a bug. You should post about this bug in Doge ROM thread. If you want to get rid of the bug flash stock (via sp flash tool) and then other custom rom. If you want to use a custom kernel with a custom rom keep in mind to check that the base rom used is A116 stock.
I have also read that removing the battery for an hour or two and than putting it back in solved the problem.
The other problem can be the charger. Are you using the USB cable that came with your smartphone? Even if you are charging with the original cable do get a hold on another(from your friend owning a116) and check if the problem still persists.
Thanks anyway
Jayvijay Gohil said:
If the phone charges while switched off there is no hardware problem whatsoever. It's a bug. You should post about this bug in Doge ROM thread. If you want to get rid of the bug flash stock (via sp flash tool) and then other custom rom. If you want to use a custom kernel with a custom rom keep in mind to check that the base rom used is A116 stock.
I have also read that removing the battery for an hour or two and than putting it back in solved the problem.
The other problem can be the charger. Are you using the USB cable that came with your smartphone? Even if you are charging with the original cable do get a hold on another(from your friend owning a116) and check if the problem still persists.
Click to expand...
Click to collapse
I relly appreciate your comment sir. But ive allready tried to flash stock via sp tool but the problem is no driver found in my device. Were the same thought it is not about hardware problem therefore i wont to go to service center for this. Id like to solve this issue with my own searching and also asking here :laugh::laugh:
I think the problem is the built in driver of my phone is corrupted. When it connect to pc. It always say unknown device.
Guilaz said:
I relly appreciate your comment sir. But ive allready tried to flash stock via sp tool but the problem is no driver found in my device. Were the same thought it is not about hardware problem therefore i wont to go to service center for this. Id like to solve this issue with my own searching and also asking here :laugh::laugh:
I think the problem is the built in driver of my phone is corrupted. When it connect to pc. It always say unknown device.
Click to expand...
Click to collapse
i tried all stock rom of different version ,custom rom,flashing stock by formatting and flashing method by sp tool,changing karnel all possible,but finally no result still i can flash .and charge in off mode.but in on mode only otg function working no pc connection no charging.
its true that driver problem but how i can get that particular driver.and why flashing not resolving the problem any help please .thanks
vicky4india said:
its true that driver problem but how i can get that particular driver.and why flashing not resolving the problem any help please .thanks
Click to expand...
Click to collapse
Vicky i successfuly flash stock via spflashtool but i still having a problem about charging . Now weve noticed that sp flash tool is not sulotion
Ya so flash tool is not the solution. It should be meta mode flashing. But as on some forum described meta mode flashing via connecting the phone by holding volume up .I tried but found it is not meta mode flashing .so only a factory mode flashing can help.second I checked in boot loader test it showing charger connected but the power its getting from the charger shows 49 ma.that's the reason of slow charging while switched off.but when switched on I tried diagnostic tools no charger and USB connection detected soclear some bug in a script which not let USB connection and charging .
Still cross finger waiting for expert solution.
vicky4india said:
Ya so flash tool is not the solution. It should be meta mode flashing. But as on some forum described meta mode flashing via connecting the phone by holding volume up .I tried but found it is not meta mode flashing .so only a factory mode flashing can help.second I checked in boot loader test it showing charger connected but the power its getting from the charger shows 49 ma.that's the reason of slow charging while switched off.but when switched on I tried diagnostic tools no charger and USB connection detected soclear some bug in a script which not let USB connection and charging .
Still cross finger waiting for expert solution.
Click to expand...
Click to collapse
i google your problem and found a very strange solution( strange because it is illogical but don't know how it is working for some people you may try it )
http://forums.androidcentral.com/go...-charges-when-phone-off-dosent-when-help.html
Thanks I already googled and found that option. But that one is not working.
Sent from my Micromax A116 using xda app-developers app
I tried each and every option even updated latest kash kernel. Stock kernel. Doge rom stock rom. I also seen two new thread same problem but not solving please someone help
Stock rom with 4.2 orginal...
If the problem continues. Flash with sp tool and get to mmx care....
Sent from my Micromax A116 using XDA Free mobile app
I had the same problem
i had the same problem ,
just change your cable and make sure the front part of the cable i mean the one you insert in your phone looks like original micromax cable
this helped me and now man phone is charging fine
hope it works for you
Same problem here nothing seems to work
I have the same problem here with my Micromax A117 Canvas Magnus the mobile charges well when switched off but when its on it refuses to do so. It sends current in reverse lighting up the LED on the charger.
Every thing in the phone is stock.
I'm using the provided adapter and cable.
Guess its a problem with Micromax
Not charging phone while switched on
I am also facing the same problem, Not charging phone while switched on, please help!
Same problem
hi there
i am having a auxus nuclea n2 phone. this is also a mediatek phone. Same problem. while switched on. No charging. No usb. When switched off. Slow but perfect charging. I consulted auth. service centre and flashed default stock ROM provided by them via SP flash. But no result. Antivirus results also clean. Waiting to solve this BUG.!!
just flash the stock ROM then give to service center
they will solve the problem :laugh::laugh:
Micromax A116 switched off during factory reset due to low battery
Hi,
My micromax a116i swiched off during factory reset(manually) and it is death now, charging indicator showing nothing, even I have try to power on button, but still it is not working.
Please help.
Regards
Pravin
Resolved
Mobile uncle tool engineering mode solved my issue
Thanks to below post. (Solution at end)
S2 not charging when phone is switched on | Android Forums -androidforums.com/threads/s2-not-charging-when-phone-is-switched-on.561877
Related
UPDATE 2 : 29th Nov
ok lemme rephraze what i need
i am having a drain bug in my setup, be it stock or custom rom .
using latest safestrap and running stock ICS , black widow and eclipse Roms
all showing similar levels of battery drain.
cant use fastboot or anything that requires a PC to flash stuff as my phone wont connect to any PC.
just tell me how to fix this battery drain issue without using a PC
------------------------------------------------------------------------------------------
UPDATE as on Nov 29th
after reading a lot , i came to know that the guy from whom i bought this phone flashed a kexec XT910 CM10 build on it , the build couldnt work as the phone process was force closing ,
but i suppose despite my reactivating the stock the kexec build kernel is still functional on the phone thereby leading to battery loss in sleep as well as occasional freeze,
So i guess in this light someone can shed some light on the issue of how can i replace this evil cm10 kexec kernel with the stock ics Xt912 kernel WITHOUT THE USE OF A PC as i suspect flashing of that cm10 build isnt letting me connect to any PC in any mode with any cable.
CHK the attached pics for the condition the phone was in when i bought.
=====================================================
ORIGINAL QUERY​
got a XT912 Of ebay.
phone has safestrap , stock partition , and 4 others .
when i got it , it was on cm9 i guess or 10 with phone process force closing
iall i did was boot to stock Xt912 thru safestrap ( stock ics 4.0.4 was already there )
But the issue has been i have not been able to connect this phone to any PC with any cabae at all, wanted to clean it and flash the 4.0.4 XML via rsd lite , the phone charges alright via usb cable, but as soon as you plug it in the prompt says unrecognised device, changes all the options in storage settings as well.
but i could live without that,
the other and most annoying major issue is that the Kernel in stock has gone totally evil, its sucking up all the juice Gsam battery info shows 85% of battery was drained by it sitting idle in last 6 hrs
one more interesting thing is that the phone itself becomes frozen , the soft touch lights keep glowing and the phone screen goes black and unresponsive to everyrthing, i have hardset reset by power and vol down to reboot. wehat is this happeneing
its happening on stock ROM as well as eclipse rom that i just installed on another partition thru safestrap.
can anyone tell me
1.. how to get over usb connection unrecognized thingy ( tried every possible thing i could fine )
2.. how can i flash the stock ICS with stock kernel without connecting to usb, are there zip files available for that , dont wanna mess up whatever i already am having.
any help would be appreciated
lord dredd said:
got a XT912 Of ebay.
phone has safestrap , stock partition , and 4 others .
when i got it , it was on cm9 i guess or 10 with phone process force closing
iall i did was boot to stock Xt912 thru safestrap ( stock ics 4.0.4 was already there )
But the issue has been i have not been able to connect this phone to any PC with any cabae at all, wanted to clean it and flash the 4.0.4 XML via rsd lite , the phone charges alright via usb cable, but as soon as you plug it in the prompt says unrecognised device, changes all the options in storage settings as well.
but i could live without that,
the other and most annoying major issue is that the Kernel in stock has gone totally evil, its sucking up all the juice Gsam battery info shows 85% of battery was drained by it sitting idle in last 6 hrs
can anyone tell me
1.. how to get over usb connection unrecognized thingy ( tried every possible thing i could fine )
2.. how can i flash the stock ICS with stock kernel without connecting to usb, are there zip files available for that , dont wanna mess up whatever i already am having.
any help would be appreciated
Click to expand...
Click to collapse
are your drivers installed?
yes installed and reinstalled latest drivers many times.
currently installed MotorolaDeviceManager_2.3.4, i guess they r latest.
updated the safestrap
installed another ROM in eclipse 1.5 on the partition 2
but still battery drain is similar and got 2 phone freezes as well.
and still not able to connect the phone to PC in any possible way .
looks like some glitch in the kernel as Gsam battery monitor shopws kernel is using up a lot of battery.
nones having any idea ?
i am kinna stuck guyz
chip in with whatever you think is doable
regards
lord dredd said:
nones having any idea ?
i am kinna stuck guyz
chip in with whatever you think is doable
regards
Click to expand...
Click to collapse
try different cable or computer. then, if eclipse or stock "sees" your device, flash stock firmware using RSD lite
or, flash another kernel
also, there is another method flashing stock firmware, but I see now that the site is not working anymore...
http://www.eternityproject.eu/topic/53-eternityproject-fla****-rsd-alternative-for-flashing/
try yourself later
good luck
is it not possible to flash another kernel , i meran the stock kernel using cwm or safestrap ?
i guess till this phone accepts any cord or PC , thats the best bet
lord dredd said:
is it not possible to flash another kernel , i meran the stock kernel using cwm or safestrap ?
i guess till this phone accepts any cord or PC , thats the best bet
Click to expand...
Click to collapse
Unfortunately there is NO way to flash stock firmware, nor kernel without using an usb cable...
You can only flash radio with custom recovery (I've tried bootmenu manager)
For a better info about flashing kernel, see posts 525 and 526 form here:
http://forum.xda-developers.com/showthread.php?t=1964792&page=53
Have you tried another computer and cable?
Also I suppose your pc doesn't see the phone when is in fastboot mode...
Yes nothing in USB or fast boot mode.
Although phone does connect in sbf made but that again needs it to be in fast bout to flash the ROM.
Gonna give those links a try.
Is there any jig or something somewhere.
edit : well again this also requires connecting to PC , which isnt possible
is there no way to flash stock or just kernel only via recovery
Sent from the DAD of all S2s - The Epic Touch.
UPDATE as on Nov 29th
after reading a lot , i came to know that the guy from whom i bought this phone flashed a kexec XT910 CM10 build on it , the build couldnt work as the phone process was force closing ,
but i suppose despite my reactivating the stock the kexec build kernel is still functional on the phone thereby leading to battery loss in sleep as well as occasional freeze,
Can anyone now shed some light on the issue of how can i replace this evil cm10 kexec kernel ( if my assumption is correct ) with the stock ics Xt912 kernel WITHOUT THE USE OF A PC as i suspect flashing of that cm10 build isnt letting me connect to any PC in any mode with any cable.
Or may be just link me to any custom stock based ROM which has the stock kernel in it.
i can transfer the rom zip to my sd card thru other means and flash thru the safestrap recovery
lord dredd said:
UPDATE as on Nov 29th
after reading a lot , i came to know that the guy from whom i bought this phone flashed a kexec XT910 CM10 build on it , the build couldnt work as the phone process was force closing ,
but i suppose despite my reactivating the stock the kexec build kernel is still functional on the phone thereby leading to battery loss in sleep as well as occasional freeze,
Can anyone now shed some light on the issue of how can i replace this evil cm10 kexec kernel ( if my assumption is correct ) with the stock ics Xt912 kernel WITHOUT THE USE OF A PC as i suspect flashing of that cm10 build isnt letting me connect to any PC in any mode with any cable.
Or may be just link me to any custom stock based ROM which has the stock kernel in it.
i can transfer the rom zip to my sd card thru other means and flash thru the safestrap recovery
Click to expand...
Click to collapse
The kexec Kernel doesnot delete your stock kernel , it just bypasses it . Your best bet is to ask the CM10 dev on how to remove/uninstall the ROM & kernel. I guess HSD-Pilot/Hashcode will be able to help you out.
lord dredd said:
UPDATE as on Nov 29th
after reading a lot , i came to know that the guy from whom i bought this phone flashed a kexec XT910 CM10 build on it , the build couldnt work as the phone process was force closing ,
but i suppose despite my reactivating the stock the kexec build kernel is still functional on the phone thereby leading to battery loss in sleep as well as occasional freeze,
Can anyone now shed some light on the issue of how can i replace this evil cm10 kexec kernel ( if my assumption is correct ) with the stock ics Xt912 kernel WITHOUT THE USE OF A PC as i suspect flashing of that cm10 build isnt letting me connect to any PC in any mode with any cable.
Or may be just link me to any custom stock based ROM which has the stock kernel in it.
i can transfer the rom zip to my sd card thru other means and flash thru the safestrap recovery
Click to expand...
Click to collapse
The link below has a complete stock ROM zip that I had to use to restore a while back when I screwed things up trying to add Google Now to ICS. LOL
I used the 6.7.2
http://sbf.droid-developers.org/cdma_spyder/list.php
thanks mate , but these ROMs can be flashed only thru RSDlite in fastboot mode and for that you need your phone to be connected to a PC ,
and my issue is my phone doesnt get recognised by any PC at all
i need a kernel or a rom with a kernel that can be flashed via recovery
ok lemme rephraze what i need
i am having a drain bug in my setup, be it stock or custom rom .
using latest safestrap and running stock ICS , black widow and eclipse Roms
all showing similar levels of battery drain.
cant use fastboot or anything that requires a PC to flash stuff as my phone wont connect to any PC.
just tell me how to fix this battery drain issue without using a PC
help me plz !!!
Don't know on the fixing battery draing and I am out of suggestions.
Just a few things. And I read a lot of your problem.
When you say windows won't recognize it, are you talking about USB pop ups when you plug it in saying device not recognized?
Because the phone is fragged. That would seem normal.
I just double-checked mine.
In AP fastboot mode windows does not load the normal USB drivers. The only place it shows in windows is under ADB Device in Device Manager. No pop ups.
When in AP Fastboot, the phone recognizes when a USB cable is plugged in. AND when I fire up RSDLite, and I click show devices and it shows nothing. But it should still load.
I just wanted to make sure that you weren't relying on the normal pop-up you get when you normally plug your phone in. You are not going to get that when phone is in fastboot mode. Windows won't show any pop-ups. But it does show in Device Manager under ADB Devices. And the phone switches over to connected on the display.
I just wasn't clear if you had tried that from reading your posts.
Hope you get it resolved.
Hi,
lord dredd I have exactly the same problem, but i haven't applied custom ROM or other kernel. My Device is running on stock OS.
This problem began on sunday, 25th of November, and from that day i'm struggling to repair it.
What i have discovered through App "BetterBatteryStats" is that there are constantly active two kernel wakelocks: "usb" and "suspend_backoff". Through App "OS Monitor" i found that process "system" is constantly using 15-30% of CPU. Sometimes this process is calming down, but plugging USB cord to the phone results in waking it up again.
I think that this two are connected with each other.
The last thing i can now think about is that the USB port or motherboard in the device is corrupted.
I hope that this information will be helpfull in diagnosing what is causing this problem.
Sory, if my english is bad, but i'm not, a native english speaker.
85gallon said:
Don't know on the fixing battery draing and I am out of suggestions.
Just a few things. And I read a lot of your problem.
When you say windows won't recognize it, are you talking about USB pop ups when you plug it in saying device not recognized?
Because the phone is fragged. That would seem normal.
I just double-checked mine.
In AP fastboot mode windows does not load the normal USB drivers. The only place it shows in windows is under ADB Device in Device Manager. No pop ups.
When in AP Fastboot, the phone recognizes when a USB cable is plugged in. AND when I fire up RSDLite, and I click show devices and it shows nothing. But it should still load.
I just wanted to make sure that you weren't relying on the normal pop-up you get when you normally plug your phone in. You are not going to get that when phone is in fastboot mode. Windows won't show any pop-ups. But it does show in Device Manager under ADB Devices. And the phone switches over to connected on the display.
I just wasn't clear if you had tried that from reading your posts.
Hope you get it resolved.
Click to expand...
Click to collapse
Yes I have tried the fast bolt modes and tried flashing with rsd lite as well as tried adb commands too
But nothing actually happens.
The phone sits like that and in adb it says waiting for the device.
I have now lost all hope and will not use this phone.
Sent from the DAD of all S2s - The Epic Touch.
Send a PM to some devs with detailed info about your problem, one of them will help you
Try hashcode, whirleyes, frasertag.
Also you can check this forum:
http://www.droidrzr.com/index.php/index
And most important: DON"T LOSE HOPE
heblu said:
Send a PM to some devs with detailed info about your problem, one of them will help you
Try hashcode, whirleyes, frasertag.
Also you can check this forum:
http://www.droidrzr.com/index.php/index
And most important: DON"T LOSE HOPE
Click to expand...
Click to collapse
thanks a lot mate
lets hope this becomes phone again and doesnt remain like a damn paperweight
regards
guyz tell me
howabout if i downgrade my safestrap to 2
and flsah this
http://forum.xda-developers.com/showthread.php?t=1716392
i guess this one might help fix if this flashed a kernel as well ?
regards
PS : got a working link from droidrazr forumjs.
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
You can try connecting to your PC via Odin and try the unbrick method by some guy named qbking on youtube. Link below
https://www.youtube.com/watch?v=m8tg9AlfOQ8&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Joshua Mr PC Repair said:
I was Trying to load a rom onto my Note and when it went through it said failed , so when i rebooted the phone it would not power on at all , the battier was very low when i did it , so i plunged my phone in and it wont even accept usb power , did i destroy my note ?
HELP
Click to expand...
Click to collapse
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
captemo said:
quick tip, always have a good charge when flashing 70% or better. flashing for me can sometimes use a lot of juice, especially when you are low.
were you trying to charge battery through USB or wall? try wall or maybe different USB port.
if you get power, can you get download mode? hold volume down & power and plugin USB
if you have download mode, your good.
ROM was for your phone and carrier right? just had to ask, you wouldn't be first
Click to expand...
Click to collapse
it was for carrier rom i wanted to return it to stock , and yeah i hooked it to the wall still didnt get any power , but im gonna check out that QBking77's Video , Ill Let you guys know , Thanks
:fingers-crossed:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
rangercaptain said:
Don't use usb power. Use the wall charger and the factory charging cable. Give it four hours, then try again. You're not bricked.
Click to expand...
Click to collapse
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Good For You!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Glad you're not bricked! I was bricked a few months ago, yes the real hard brick paper weight dead no response brick, not what these other post about having bricked their phone. I downloaded and installed a Liquid smooth jelly rom, but the post linked to a s3 build.
As soon as my phone didnt turn I feared the worst. Confirmed and yes it was gone. I had to send it off to get J-tagged. It worked!
Cost me a pretty penny. Then the thread mod was like oops! I linked the wrong rom hope nobody installed and got brick, just fixed it.
Ain't that some ****!
Joshua Mr PC Repair said:
Fixed it , Now How do I Unroot and install the Bell Stock Rom , Please and thanks
Click to expand...
Click to collapse
Read up my friend. It is all in the general section Super Everything, The All in one stock thread, and finally here. You are not unrooting insomuch as just flashing stock. Once you flash stock, that overwrites/deletes twrp/cwm and supersu.
Yes, as ^^^^ mentioned, you don't have to be concerned about unrooting.
There are debloated and bloated versions of stock Canadian roms in the development section. Another source for stock/carrier roms is www.samfirmware.com but you have to flash those with a pc using Odin software.
hello,
my Xperia P's Usb port is now working it's charging but couldn't connect to any PC or OTG Media ....
as PC connection not working so i m unable to flash my phone in flashboot mode.
i tried to consult to service center guys they say as my device is rooted they can't help me fix this problem....
i don't want to loose my phone please help me.... every thing in my phone is brand new and original but as i use custom kernel & rom ...so they are not accepting my phone ....
is there any other way i can use to flash my device to stock ... so i can get it fixed .
i can turn on my phone but it shows no sim no wifi ...
please help...
thanking you
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
ChikeD said:
Have you checked that flash mode is not working?
Is it charging when connected to the PC, try another USB cable.
No wifi wuth and without SIM installed?
How this problem began, have you dropped your phone or installed some software?
Click to expand...
Click to collapse
yes i checked .. flash mode is not working not even fastboot mode ...
yes it's charging ...i tried 4-5 different cables ...i also checked cables with my brother's phone they were working fine...
it started a week before everything was working great i tried to connect my device i thought it would b new rom's problem so it will b fixed... so i try to flash other rom but accidentally i formatted system after wiping data and factory reset ... but that rom hangs as it says unable to mount system...
i try the older rom it flashed but in about phone there's baseband version is unknown, wifi was not turning on and i can't gain root access via terminal emulator or titanium backup or any other root app...
i thought to revert everything back via flashtool but my device couldn't be connected in flash mode... green light goes on n turned to red again and battery start to charge ...
sorry for wrong english ...
but thanks for your interest and reply ...
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
miteshlakhwani said:
hello,
yes i had used flashtool near about 40-60 times before on same pc on same phone on my brother still uses the same ...
Click to expand...
Click to collapse
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
ChikeD said:
@miteshlakhwani
Did flashtool worked on the same PC before, I mean to make sure it's not driver issue, or USB 3 portm and the phone is shut down with power + volume up untill you feel 3 vibrations.
Click to expand...
Click to collapse
i also try to get it diagnosed at local street repair shop as sony service center guys behaved really bad with me ... not even check my device they turn it on instead of sony logo it shows nemesis kernel logo so they say your device is rooted we can't accept it ...
i felt v.bad ...
local street repair guy told me to leave my device with hi for a day or 2 ... but i don't trust them so i couldn't do that...
he told me that port is ok it might b an ic chip which get's fungus or any kind of short circuit is happening there only ...
i m totally confused
thanks for ur reply
ChikeD said:
What do you see in flashtool log when trying to connect in fastboot mode?
Make sure the phone is off before you do.
Click to expand...
Click to collapse
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
miteshlakhwani said:
it load up the ftf file .. n then ask me to connect my phone in fastboot mode as i had done it earlier many times...
first power off my device... wait for a minute then ...
then press vol down key n connect it to pc..
green notification light goes on... and then turn in red and phone shows nemesis logo n then offline battery charging logo...
in my pc nothing happen it still ask for my device in flashmode...
Click to expand...
Click to collapse
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
ChikeD said:
Just open flashtool lwindow, no flash anything, and connect your device in fastboot mode.
Anything in the log?
It might be the USB connection, I tried to fastboot connecting to my charger, the led turn on blue for 5 seconds then go to charging.
Same with flash mode.
Click to expand...
Click to collapse
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
miteshlakhwani said:
no it doesn't shows any thing ...
yes the same thing happens when i try to connect my phone to my pc in flash mode ....
(sorry for late reply i m facing some problems with my internet connection as it's stormy here)
Click to expand...
Click to collapse
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
ChikeD said:
Looks like hardware problem to be, either the connecter itself or chip.
How much would it cost to replace it, or maybe can they check connectivity.
If you enter CWM and connect it to the PC is there any indication it's connected?
Click to expand...
Click to collapse
i also tried that too in CWm too there's no sign of any connection in pc ...
service center guy said that replacing port is not possible so they had to replace complete board ... n that will cost around 80% of cost of device....
but they won't do it as my device is rooted ...
This happened with my S3 just recently and they swore it wasn't the USB connector if it would charge. I called T-Mobile and got upset and told them I plug in an identical S3 and it shows immediately with mine it won't not even in download mode. They swapped it out for me.
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
dara007_168 said:
If possible just flash stock firmware via cwm. And send to service center
Correct me if I'm wrong
Click to expand...
Click to collapse
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
ChikeD said:
And how exactly are you going to put it on the device, with no wifi or ysb connection?
Unless by a chance bluetooth is working.
Click to expand...
Click to collapse
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
No SD card, and you can relock BL, but not without flashtool.
dara007_168 said:
Yeah If Bluetooth work.Xperia P has no sd card?(Seriously i don't know)
Correct me if I'm wrong
---------- Post added at 04:53 PM ---------- Previous post was at 04:47 PM ----------
I think even if your device back to stock rom the service center not going to fix it,Why?Because flash a custom kernel mean that u already unlocked the bootloader.If going back to stock rom fix your phone that ok but if not you can't relocked your bootloader that still the same
Correct me if I'm wrong
Click to expand...
Click to collapse
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
miteshlakhwani said:
thanks for your support but Bluetooth isn't working too ...
last night i downloaded disassembly guide of xperia P & as doubt by local repair man that it my b some type of clogging in port or in system board... i disassembled my phone step by step as directed in gude i took our board clean port & board thoroughly ... and put it back ... but that wont helped too ...
it feels completely helpless ...
i m having my phone in my hand ... it turns on ... n off only ..
my mistake was that i formatted the system from CWM ...if i didn't done that i can flash any of 2 roms in my sd card or can use my phone ....
thank you for all yours reply and time, it's really appreciable .... :good:
Click to expand...
Click to collapse
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
dara007_168 said:
Bro I think the only way to fix it is to replace the hold new system. But it's cost alot
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
yes i enquire about replacing board from sony service center they told it will cost approx 80% of cost of mobile ...
Ok, this is as much a heads up to other P780 users as a desperate shoutout for help... I don't think I've seen anybody else with this problem so far, so here goes.
I purchased a P780 in december 2013, loved every bit of it and it worked flawlessly until about 1 month 1/2 ago. The phone was still brand new, but all of a sudden, it decided it will not charge unless I shut it down.
Basically:
- Phone powered ON, no charge, and not recognized when plugged into a computer => nothing happens. The funny thing is if I use the USB OTG cable, it will actually see and read USB flash drives...
- Phone powered OFF, will charge although the screen won't show anything, only the red led will let you know that it is charging. Also, it won't charge past 88%, meaning when I turn it off and charge it, the maximum battery % is 88% even if I let it charge for 2 days...
The phone has been like that for more than a month now... I considered sending it back for repair or exchange, given it's still under warranty but I am afraid to do so, since I would have to send it back to china and the seller who I bought it from won't help.
Ok, so what do you guys suggest I do? Do you think it's hardware related or software related? I am not sure it is hardware since it will actually charge albeit when powered off, and it will see USB flashdrives when using the USB OTG cable...
PS: I am running multinlingual S125 (Chinese P780).
The easiest solution is: Do a factory reset, if not working; Flash another ROM. Still not working? Sent back to service center, probably is hardware issue then.
Well that was my first reaction, when I first noticed it about 1 month 1/2 ago: I directly factory reseted it, which did nothing. I then proceeded to reflash the ROM (Multinlingual S125, Chinese base), which also did nothing. By the way, flashing was a bit of an ordeal since the tel would not be recognized when plugged into a computer. What I did was press Power + Volume Up, after launching flashtool and clicking on download or firmware upgrade. Only then would the computer recognize that something is being plugged in and start the flashing process. May be that info could help other people...
I proceeded to changing base to ROW P780 (using satanduck's ROW S123) a few days ago, in a last desperate attempt that it would change something, but alas... Really though, sending the phone back to China for repair scares the living f**k out of me, I don't even know how to proceed or where to begin...
Same here, i have charging problem with my p780. It wont charge with powered on, and only able to charge when switch it off. Been doing resets and flashes many time since then but nothing can fix my charging issue. Asked several times in local p780 forum including kaskus, also give no solution. I:ve read many complain bout lenovo SC in my country, make me think twice to take my phone there.
Sent from my Lenovo P780 using xda app-developers app
Same here
I have same problem. It's nice to know that phone will be recognized in recovery mode... so I can flash it.. since I have managed to damage its rom, so it wont boot. All in hope to solve this no-charging problem..
Still have same problem, even worse..
I have checked, unforunatly, my PC doesn't register my phone as any device when it's in recovery mode. With that said, I can't flash new rom, or recovery. Now I'm stuck with rom that doesn't boot, TWRP recovery that is incompatible with this phone (so I can't flash another rom), USB connection that makes phone unrecognizible by PC so I can't flash rom/recovery with flashtool..
I have gone to official Lenovo service here in Serbia, but since I have KIT (for China market) version of phone, there is nothing they could do to help. Pretty lame..
dario.alispahic said:
I have checked, unforunatly, my PC doesn't register my phone as any device when it's in recovery mode. With that said, I can't flash new rom, or recovery. Now I'm stuck with rom that doesn't boot, TWRP recovery that is incompatible with this phone (so I can't flash another rom), USB connection that makes phone unrecognizible by PC so I can't flash rom/recovery with flashtool..
I have gone to official Lenovo service here in Serbia, but since I have KIT (for China market) version of phone, there is nothing they could do to help. Pretty lame..
Click to expand...
Click to collapse
Try reinstall drivers for phone. Or try use another PC with different OS (win7 or winxp). Before your phone was recognized on your PC? Did you have installed drivers for phone before?
lenovo P780 Life 07 said:
Try reinstall drivers for phone. Or try use another PC with different OS (win7 or winxp). Before your phone was recognized on your PC? Did you have installed drivers for phone before?
Click to expand...
Click to collapse
I have read almost all topics regarding p780, and have found this post:
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
That saved me... I have newer version of P780 that uses newer Preloader.img. That's why I couldn't flash anything. Now I still have that no charging while powered on problem, but at least I have 90% functional phone..
Leaked battery.
If anybody care to know why P780 has this problem. Driven by little madness I opened the device using mini screwdriver. Found lots off white crust on the right lower corner. I can conclude that mine has battery leaking problem which caused it loss 1/3 of its potential. A replacement need to be done by lenovo center.
Kevin Ismail said:
If anybody care to know why P780 has this problem. Driven by little madness I opened the device using mini screwdriver. Found lots off white crust on the right lower corner. I can conclude that mine has battery leaking problem which caused it loss 1/3 of its potential. A replacement need to be done by lenovo center.
Click to expand...
Click to collapse
Thanks for your info. I will check my phone in the morning. :thumbup:
Sent from my SMT TAB 704DC using XDA Free mobile app
Hello Guys !
I have Qmobile Z10 which is same as Micromax 5 e481 ,Wiko Fever & Blu Life One X
I have flashed Wiko Fever Stock Rom on my Qmob Z10 which was done through official wiko software and it worked flawlessly , then i decided after few days to go back to previous offical Qmob Z10 Rom , i found some several same links , but it was supposed to be flashed via sp flash tool cause its MTK 6753 device ... So i downloaded that and load scatter file and everything and i flashed it and it flashed 100% successfully but after it was completed i unplug the usb cable and try to on my device but nothing appears at all (Hard Bricked i guess) but still i get my device led light on when i plug usb cable with it and it is recognized by computer and sp flash tool and i can reflash it again , but im unable to find any solution that why official stock rom made it bricked
If any moderators or any one share their opinion or way of help that would be really appreciated
Charge the phone for a couple minutes then reflash the stock using spflash tools. After turn it on while charging and/or try while unplugged.
This happened to my blu when I restored to a previous backup using twrp 3.0
Sent from my BLU LIFE ONE X using XDA-Developers mobile app
I have same issue can anyone help me to recover my mobile qmobile Z10. I have flashed weko fever rom but it is not recognize my sims so i decided to revert back orignal stock rom but when i refleshed stock rom my cel phone got bricked and unable to switched on now. I have try everything to recover my cell phone but unable. Plz anyone help me please what can i do now to recover my bricked phone back to its original state.
m.haseebhaider said:
I have same issue can anyone help me to recover my mobile qmobile Z10. I have flashed weko fever rom but it is not recognize my sims so i decided to revert back orignal stock rom but when i refleshed stock rom my cel phone got bricked and unable to switched on now. I have try everything to recover my cell phone but unable. Plz anyone help me please what can i do now to recover my bricked phone back to its original state.
Click to expand...
Click to collapse
Can u flash with spflash?
Teblakuda4o4 said:
Can u flash with spflash?
Click to expand...
Click to collapse
Yes bro lot of time i re flashed using SP tool but on my cell phone only red light on when i connect USB cable and nothing else showing.
m.haseebhaider said:
Yes bro lot of time i re flashed using SP tool but on my cell phone only red light on when i connect USB cable and nothing else showing.
Click to expand...
Click to collapse
Try doing a manual format in the format tab of spflash, then Downloading the firmware to your phone. See if that works. If that doesn't work, try another similar phones firmware.
My Blu life one x did the same thing and I flashed it with the wiko fever firmware, then manually formatted and downloaded the Blu firmware to it and it finally worked.
Hope it works out for you.
PS- Never flash the bootloader