Ok i bought a note 2 that already has the stock 4.3 mj9 update. From what I have read you can root it but can't put custom recovery due to locked bootloader. But then I read about using strap and can run tw based roms. So I'm confused and don't want a bricked phone. Here is what I want if it's possible. I want to run Nublia rom the one that's basically a note 3. Can someone clarify if this is possible and work correctly. Also the steps involved. I don't need detail for detail if I can cause I can look up and do the steps needed. Like root install strap? Install rom? Or can't be done wait till an unlock is available if ever?
Sent from my SCH-I605 using XDA Premium 4 mobile app
kleigh774 said:
Ok i bought a note 2 that already has the stock 4.3 mj9 update. From what I have read you can root it but can't put custom recovery due to locked bootloader. But then I read about using strap and can run tw based roms. So I'm confused and don't want a bricked phone. Here is what I want if it's possible. I want to run Nublia rom the one that's basically a note 3. Can someone clarify if this is possible and work correctly. Also the steps involved. I don't need detail for detail if I can cause I can look up and do the steps needed. Like root install strap? Install rom? Or can't be done wait till an unlock is available if ever?
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm still on 4.1.2 with TWRP recovery.... but I've been following the threads on Safestrap.... so I hope I can help a little.
Other users are reporting that they're successfully using 4.3 Custom ROM's with Safestrap Beta for rooted 4.3 Sch-i605 with the locked bootloader.... This link to the thread on Safestrap Beta should help answer some questions for you. http://forum.xda-developers.com/showthread.php?p=51616723 .... People in the Safestrap Beta thread should be able to offer assistance with flashing Safestrap and a 4.3 Custom ROM after you get rooted. (From what I understand....at present, Safestrap only works with 4.3 TW ROM's with the stock 4.3 kernel... Also, they are still working out bugs.... so you'll have to flash over your stock ROM until they get where you can boot from ROM slots.... you will want to create a backup up of the stock ROM obviously before doing that).
With the N3bula ROM (or any TW ROM's on Safestrap).... people say a key thing is to make sure you choose to install the stock kernel when you install the ROM.
Here's a link to direct you to the Saferoot thread to help root your phone.... http://forum.xda-developers.com/showthread.php?p=49389228
I don't take any credit for any of this information and would encourage you to thank the original posters and developers for all their help and awesome work.
Good luck.
Sent from my SCH-I605 using XDA Premium 4 mobile app
kleigh774 said:
Ok i bought a note 2 that already has the stock 4.3 mj9 update. From what I have read you can root it but can't put custom recovery due to locked bootloader. But then I read about using strap and can run tw based roms. So I'm confused and don't want a bricked phone. Here is what I want if it's possible. I want to run Nublia rom the one that's basically a note 3. Can someone clarify if this is possible and work correctly. Also the steps involved. I don't need detail for detail if I can cause I can look up and do the steps needed. Like root install strap? Install rom? Or can't be done wait till an unlock is available if ever?
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep safe strap is the way to go.. root and then use safe strap..
Good choice on the ROM just playing..
But from what I read you need to do some modding of the ROM zip contents..
In N3bula we let you choose 2 kernels.. you can NOT flash a kernel with safe strap.. Soo you need to remove that option in the aroma script..
Then you should be good to flash..
I will be posting a NEW build most likely tomorrow and I will add a Safe Strap zip so it's up to you to hold off..
Also poke your head into the safe strap and make sure my steps are correct, since I do not run safe strap. .and also hit "Thanks" on @Beastmode profile bc he is the one that got safe strap up and running for you guys:thumbup:
Sent from my SCH-I605 using xda app-developers app
Thank yall for the help i have been waiting to run the rom for awhile anyway so waiting a little longer is no problem. I just wanted to ask cause the last thing i want is to go and brick the phone cause there are so many posts about 4.3 locked bootloader it gets a little confusing trying to catch up lol
Sent from my SCH-I605 using XDA Premium 4 mobile app
kleigh774 said:
Thank yall for the help i have been waiting to run the rom for awhile anyway so waiting a little longer is no problem. I just wanted to ask cause the last thing i want is to go and brick the phone cause there are so many posts about 4.3 locked bootloader it gets a little confusing trying to catch up lol
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No problem.. look for a safe strap download tomorrow or Saturday
Sent from my SCH-I605 using xda app-developers app
@kleigh774 - I'm glad to try to help. I've only had my Note 2 for a few months. So far, I've just stayed with 4.1.2 ROM's because I've been happy with how well they've been working for me. I've been contemplating trying out some 4.3 Roms and I'm gonna check out Trans Nebula Team's newest N3bula build this weekend . It's great that Safestrap is being developed for those on 4.3 locked stock and I hope you get to enjoy some custom Rom's soon. .
Sent from my SCH-I605 using XDA Premium 4 mobile app
Related
So I used to have a fully unlocked Dinc2 and I was able to pick ip this S4. Wow what a major difference. I stopped the auto update while in the store and obtained root. Now what do I need to do to keep root and not have the auto update ever happening again. Also I just put on cwm recovery nothing else. What needs to b done now? Am I able to flash any ROM/kernel here or are there restrictions? Thamks yall for the help. Looking forward to the great development that is gonna happen.
Sent from my SCH-I545 using xda app-developers app
FordNate said:
So I used to have a fully unlocked Dinc2 and I was able to pick ip this S4. Wow what a major difference. I stopped the auto update while in the store and obtained root. Now what do I need to do to keep root and not have the auto update ever happening again. Also I just put on cwm recovery nothing else. What needs to b done now? Am I able to flash any ROM/kernel here or are there restrictions? Thamks yall for the help. Looking forward to the great development that is gonna happen.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
get titanium backup and freeze/backup+uninstall SDM that will keep updates from happening. (only for stock rom, once you install a rom it won't be a problem all roms have SDM disabled by default)
you can now flash any touchwiz rom however unless your cwm is loki'd you can't flash aosp roms (such as cyanogen mod, MIUI, aokp...)
so basically if you are not lokied you can flash only roms on the android development board if you ARE lokied you can flash those AND the ones in the ORIGINAL android development board.
Sent from my SCH-I545 using xda app-developers app
FordNate said:
So I used to have a fully unlocked Dinc2 and I was able to pick ip this S4. Wow what a major difference. I stopped the auto update while in the store and obtained root. Now what do I need to do to keep root and not have the auto update ever happening again. Also I just put on cwm recovery nothing else. What needs to b done now? Am I able to flash any ROM/kernel here or are there restrictions? Thamks yall for the help. Looking forward to the great development that is gonna happen.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
My suggestion is to flash the hyperdrive rom and have fun!
Drake9897 said:
My suggestion is to flash the hyperdrive rom and have fun!
Click to expand...
Click to collapse
+1 for Hyperdrive!
Sent from my Hyperdriven Dev Edition Vzw SCH-I545 with KT kernel using Tapatalk 4
reinaldistic said:
get titanium backup and freeze/backup+uninstall SDM that will keep updates from happening. (only for stock rom, once you install a rom it won't be a problem all roms have SDM disabled by default)
you can now flash any touchwiz rom however unless your cwm is loki'd you can't flash aosp roms (such as cyanogen mod, MIUI, aokp...)
so basically if you are not lokied you can flash only roms on the android development board if you ARE lokied you can flash those AND the ones in the ORIGINAL android development board.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Sweet time to look up loki, but first freeze that app... I hate being a flashoholic sometimes
FordNate said:
Sweet time to look up loki, but first freeze that app... I hate being a flashoholic sometimes
Click to expand...
Click to collapse
if you look at cyanogenmod's thread it tells you how to do it in the requirements
Sent from my SCH-I545 using xda app-developers app
So I did something really really dumb and did the OTA update to 4.3 then tried to "downgrade" to 4.1.x using oden and now I cant use my device. Does anyone have the OTA update for 4.3 available for download that I can try to fix my phone with?!?
go to sammobile. com and download it there.
I posted it in the development forum, with the rest of the stock restore images...
same problem here cant downgrade i was in 4.3 and root with kingo and then install recovery with rom manager and the boot in to recovery with the message : software not authorized by verizon,please help
imnuts said:
I posted it in the development forum, with the rest of the stock restore images...
Click to expand...
Click to collapse
vladimirtm said:
same problem here cant downgrade i was in 4.3 and root with kingo and then install recovery with rom manager and the boot in to recovery with the message : software not authorized by verizon,please help
Click to expand...
Click to collapse
Downgrading isn't possible. Neither is loading custom recovery. You now have a locked bootloader.
Sent from my SCH-I605 using xda app-developers app
so how i can fixed? im bricked
vladimirtm said:
so how i can fixed? im bricked
Click to expand...
Click to collapse
Flash the 4.3 Odin file. Might need the pit file as well.
Sent from my SCH-I605 using xda app-developers app
where is it i cant found it
akellar said:
Flash the 4.3 Odin file. Might need the pit file as well.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
vladimirtm said:
where is it i cant found it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2040264
As an option, you can still go to stock 4.1.1
Sent from my SCH-I605 using XDA Premium 4 mobile app
nikhil.kdhand said:
As an option, you can still go to stock 4.1.1
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can not downgrade, and attempts to do so will potentially trip your KNOX counter. At the very least you'll end up soft-bricked and have to do a repair install....of 4.3.
nikhil.kdhand said:
As an option, you can still go to stock 4.1.1
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No you can't. As has been mentioned in just about every 4.3 thread multiple times.
Sent from my SCH-I605 using xda app-developers app
Meat & Potatoes:
I tried ODINing my GN2 back to stock 4.1.2 tonight - I rooted it a couple months ago. Did not install a custom ROM, just rooted (the process also replaced the Recovery).
Tried ODINing back to stock using the files and information found in this thread: http://forum.xda-developers.com/showthread.php?t=2024207
When I run ODIN, it simply fails. Tells me "0 succeeded / 1 failed". Phone still works, I just can't get anywhere in the rolling back to stock bit.
Longer Version:
I've had the phone since the end of January 2013. I rooted it for a couple of reasons, mostly to get rid of bloatware, but also for an app or two that needed root access. I've had zero problems with usability or stability of the device before or since the rooting.
I couldn't tell you which root process I used, but I know it came from an XDA thread, and it automatically replaced the recovery with something touch-based. I'm not sure of the name of the recovery. It did not replace the ROM - I've had less than desirable results from using non-stock ROMs in the past on a handful of other devices, so I wasn't about to risk it.
Since VZW is rolling out the 4.3 update and it looks like a good deal, I want to get my phone back to non-rooted, non-custom-recovery'd state so I can install the update. I'm also doing it because I'm hoping they get the phone up to 4.4 down the line so I can use HCE and GWallet.
Currently, I'm downloading (very slowly, thanks sammobile, for not hosting files on your own servers) the stock VZW 4.3 package from Sammobile.com in hopes I can do something with that and just go straight up from where I am, but I'm not holding my breath since the OTA fails due to the custom recovery.
Any thoughts on what I might try differently to get ODIN to work?
Guys I had the same issue. What I did to resolve my issue is:
1. Get the Verizon upgrade assistance installed on your PC . Here's one from scoobysnack (http://forum.xda-developers.com/showpost.php?p=47368638&postcount=7&nocache=1&z=2813086102250963)
2. Boot to download mode
3. plug in USB and wait for the update message on your PC
4. Update should take about 30-40 min depending on your connection speeds.
5. once updated, your phone should boot back to normal, but you will LOSE everything and have to start all over.
Hope this helps.
Blupine said:
Meat & Potatoes:
I tried ODINing my GN2 back to stock 4.1.2 tonight - I rooted it a couple months ago. Did not install a custom ROM, just rooted (the process also replaced the Recovery).
Tried ODINing back to stock using the files and information found in this thread: http://forum.xda-developers.com/showthread.php?t=2024207
When I run ODIN, it simply fails. Tells me "0 succeeded / 1 failed". Phone still works, I just can't get anywhere in the rolling back to stock bit.
Longer Version:
I've had the phone since the end of January 2013. I rooted it for a couple of reasons, mostly to get rid of bloatware, but also for an app or two that needed root access. I've had zero problems with usability or stability of the device before or since the rooting.
I couldn't tell you which root process I used, but I know it came from an XDA thread, and it automatically replaced the recovery with something touch-based. I'm not sure of the name of the recovery. It did not replace the ROM - I've had less than desirable results from using non-stock ROMs in the past on a handful of other devices, so I wasn't about to risk it.
Since VZW is rolling out the 4.3 update and it looks like a good deal, I want to get my phone back to non-rooted, non-custom-recovery'd state so I can install the update. I'm also doing it because I'm hoping they get the phone up to 4.4 down the line so I can use HCE and GWallet.
Currently, I'm downloading (very slowly, thanks sammobile, for not hosting files on your own servers) the stock VZW 4.3 package from Sammobile.com in hopes I can do something with that and just go straight up from where I am, but I'm not holding my breath since the OTA fails due to the custom recovery.
Any thoughts on what I might try differently to get ODIN to work?
Click to expand...
Click to collapse
akellar said:
No you can't. As has been mentioned in just about every 4.3 thread multiple times.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Guys...i am back to 4.1.2 rom without touching knox warranty...thanks anyways.
nikhil.kdhand said:
Guys...i am back to 4.1.2 rom without touching knox warranty...thanks anyways.
Click to expand...
Click to collapse
You installed the ota or the zip package? Not the same thing. You cannot downgrade from the ota with the updated bootloader.
Sent from my SCH-I605 using xda app-developers app
Note 2 root
akellar said:
You installed the ota or the zip package? Not the same thing. You cannot downgrade from the ota with the updated bootloader.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
So if I am understanding right I upgraded to 4.3 OTA does this mean I cannot gain root access. I have been trying to root with no luck any help would be great. I'm really hoping I am not stuck now that I updated.
jssjnkvch said:
So if I am understanding right I upgraded to 4.3 OTA does this mean I cannot gain root access. I have been trying to root with no luck any help would be great. I'm really hoping I am not stuck now that I updated.
Click to expand...
Click to collapse
You can get root. You cannot get custom recovery.
Sent from my SCH-I605 using xda app-developers app
root 4.3
akellar said:
You can get root. You cannot get custom recovery.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Could you kindly copy a link to instructions for getting root with 4.3. I have been looking everywhere and nothing seems to be working. Not sure if I am doing something wrong. If I need to unlock the bootloader I could use instructions for that as well. I have been hearing it is more difficult with knox.
---------- Post added at 02:50 AM ---------- Previous post was at 02:36 AM ----------
akellar said:
You can get root. You cannot get custom recovery.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Also what do you mean by I can't get custom recovery? Does that mean no clockwork mod or twrp?
jssjnkvch said:
Could you kindly copy a link to instructions for getting root with 4.3. I have been looking everywhere and nothing seems to be working. Not sure if I am doing something wrong. If I need to unlock the bootloader I could use instructions for that as well. I have been hearing it is more difficult with knox.
---------- Post added at 02:50 AM ---------- Previous post was at 02:36 AM ----------
Also what do you mean by I can't get custom recovery? Does that mean no clockwork mod or twrp?
Click to expand...
Click to collapse
Google kingo. It's the only root option I'm aware of. You cannot unlock the bootloader and probably never will able again. Yes this means no cwm or twrp.
Sent from my SCH-I605 using xda app-developers app
So i just got my s4 yesterday. I installed safe strap and put on the Hyperdrive rom. I want to try out the google 4.4 rom. So from my understand I just follow the video I saw on another thread to get goo manager and put loki on correct? I use that recovery to wipe and flash the rom? Then I can delete the rom slot i made for hyperdrive on safe strap correct?
jrobinsky said:
So i just got my s4 yesterday. I installed safe strap and put on the Hyperdrive rom. I want to try out the google 4.4 rom. So from my understand I just follow the video I saw on another thread to get goo manager and put loki on correct? I use that recovery to wipe and flash the rom? Then I can delete the rom slot i made for hyperdrive on safe strap correct?
Click to expand...
Click to collapse
Wrong if ur using safestrap then u can not run any 4.4.2 roms.
Sent from my Beastly powered S4 using Tapatalk
I pmd you I hope thats okay. I am running a VRUEMK2. There is not a way to run a diff recovery?
Unfortunately not at this time on anything later than MDK
Sent from my SCH-I545 using XDA Premium 4 mobile app
Thanks guys. Maybe someday soon.
jrobinsky said:
Thanks guys. Maybe someday soon.
Click to expand...
Click to collapse
Don't get your hopes up.. I've been stuck on MJ7 and there is absolutely nothing for it. I want stock 4.2.2 sooooo bad
Sent from my SCH-I545 using XDA Premium 4 mobile app
droidgenius said:
Don't get your hopes up.. I've been stuck on MJ7 and there is absolutely nothing for it. I want stock 4.2.2 sooooo bad
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There's a decent list of SafeStrap Roms but they're only Touchwiz. I know that's a bummer for some. Gigilie is porting over so many more almost daily too.
Stock 4.4.2 isn't that much different from 4.3 I can tell you that cuz I have a sprint one on that. I hear ya though on just wanting the latest and greatest.
Sent from my SCH-I545 using Tapatalk
This tutorial is for people with A2 Bootloader only. If you are already on official KK with A3 bootloader, don't use this since it will fail.
A lot of people are wondering how to go back to JB roms from Kitkat. So here's a little guide of how to do that without downgrading back to MJ5.
Assuming you are already on Kitkat rom with root and Safestrap installed.
Please download this togetsafestrap first.
DOWNLOAD ME FIRST
Extract the togetsafestrap folder somewhere you can access easily. ( Credit to Drakey for togetsafestrap method)
**** First backup all the data especially your phone internal storage since everything will be deleted. *****
1. Download the JB rom of your choice and copy it to external SD card.
Skip step 2 & 3 if you are not on SafeStrap 3.7.2
2. Uninstall the SafeStrap recovery.
3. Delete/Uninstall the SafeStrap 3.7.2 apk.
4. Install the SafeStrap 3.71 and install the recovery. (please make sure it says installed.)
5. Put your phone into download mode by either press power, restart, download mode if your rom has 4 ways reboot OR power the phone down, load into download mode by holding volume down+Power+Home buttons for few secs.
6. Connect to the pc. (Make sure all the drivers and everything is configured correctly.)
7. Open Odin from the extracted togetsafestrap folder earlier. Your phone should show up as connected.
8. Put AP and BL from togetsafestrap and press start.
9. Once everything is done successfully, the phone will reboot.
10. Now you should see the Safestrap recovery splash screen and click recovery.
11. Now make sure you wipe everything. (Dalvik cache, cache, data, system under Advance)
12. Install the JB rom of your choice from your external SD card
13. Once the rom is successfully flashed, just reboot it normally and you will be back to JellyBean rom with fully working Safestrap.
Click to expand...
Click to collapse
Let me know if you have any questions.
All credit to Hash and Drakey.
Thanks to Conekiller for those who have trouble installing 3.71. Please try out the method he did and report back if it works same for you.
Conekiller2 said:
For those of you having the issue with safestrap 3.71 not installing the recovery here is the way i was able to do it.
Reinstall the 3.72 recovery
boot into safestrap recovery
wipe rom slot
flash (install) desired jb rom via safestrap
wipe cache/dalvik
go back to main menu
reboot and select download
odin files from op
reboot
setup as usual
install safestrap 3.71
it will show newer recovery
hit uninstall recovery
hit install recovery
done
Click to expand...
Click to collapse
I'm going to stop this right now...
If you guys want to argue, take it to PM.
I will have a mod get involved if the hissy fits continue.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Not flaming, not a "Hissy fit". Just making it known...
With latest version of SafeStrap this thread is pointless. Using Odin is no longer necessary.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
joe3681 said:
Not flaming, not a "Hissy fit". Just making it known...
With latest version of SafeStrap this thread is pointless. Using Odin is no longer necessary.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So you're saying that I can use Odin to go from jellybean to KitKat and with the latest version of safestrap I can flash back to a jellybean Rom or restore a jellybean backup without the need of Odin?
Roloracer on XNote 7 Note3
roloracer said:
So you're saying that I can use Odin to go from jellybean to KitKat and with the latest version of safestrap I can flash back to a jellybean Rom or restore a jellybean backup without the need of Odin?
Roloracer on XNote 7 Note3
Click to expand...
Click to collapse
You would still need the ap and bl file from jb to go from kk down to jb. So yes Odin is still needed. The guy above you is clueless lol
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
majortaylor said:
You would still need the ap and bl file from jb to go from kk down to jb. So yes Odin is still needed. The guy above you is clueless lol
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks , I figured as much since we don't have an unlocked bootloader we can't just go back and forth just from recovery.
Roloracer on XNote 7 Note3
Thank you @mutantblack for your post. It's a great help. Now only if I could actually download the "notefire" rom, I could do this
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Woe... What did I miss graydiggy? Haha
Glad some people found this method useful even though it's pretty easy to do so.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Just people being people.
Anyways, OP, I suggest you change the title. This could confuse people to think you are talking about official KK.
Sent from my SM-N9005 using XDA Premium 4 mobile app
graydiggy said:
Just people being people.
Anyways, OP, I suggest you change the title. This could confuse people to think you are talking about official KK.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Done. Hope that title is clear enough.
If I do this and install a jb rom will I then be able to restore from my back up with out bricking and also will I need to use Odin to flash mods or will I be back like I never installed a KK rom
Sent from my SAMSUNG-SM-N900A using xda app-developers app
ryant100 said:
If I do this and install a jb rom will I then be able to restore from my back up with out bricking and also will I need to use Odin to flash mods or will I be back like I never installed a KK rom
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
You can only do mods , flash and restore backups of the same android version, if you're in jb with safestrap then you use it to do all of those, if you're in KitKat now with the update for safestrap you can do the same, but you need the comingfromjb.zip to upgrade to KitKat, and this method to go back to jb. You can use Odin for any mods as long is the same android base.
RoloRacer on ThunderKat 4.4 Nexus 10
Ok I am on knoxraid 4.4.2 rom now just wondering if I use this to go back to jb rom that I won't have to use the Odin to flash mods
Sent from my SAMSUNG-SM-N900A using xda app-developers app
ryant100 said:
Ok I am on knoxraid 4.4.2 rom now just wondering if I use this to go back to jb rom that I won't have to use the Odin to flash mods
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Well that depends on the mod, if is made in zip format then you use recovery in safestrap no matter what version of android you're using, I think only tar and pit files are flashed in Odin.
RoloRacer on ThunderKat 4.4 Nexus 10
Ya I know that basically what I'm asking Is if I use this to go back to jb will it be like I never installed a KK rom
Sent from my SAMSUNG-SM-N900A using xda app-developers app
ryant100 said:
Ya I know that basically what I'm asking Is if I use this to go back to jb will it be like I never installed a KK rom
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
That's right. You will be back to jb rom with SS but you won't be able to flash KK u less you use Odin again
Sent from my SAMSUNG-SM-N900A using Tapatalk
ryant100 said:
Ya I know that basically what I'm asking Is if I use this to go back to jb will it be like I never installed a KK rom
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Yes , the process is due to the fact that since we don't have an unlocked bootloader the different bootloader and files like modem and have to be done in Odin, that's why the two step process to go back and forth. But yes I just finally upgraded to kk, just setting up right now, to get safestrap added. I've had a bunch of previous devices and all got unlocked bootloaders so this was a learning process for myself too, but once you learn it, is easy going back and forth.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Ok cool thanks for the info and I agree about locked bootloader first phone that doesn't have a unlock for it so just wanna sure I know everything before I do it and since knoxraid thread is closed and probably won't be updated anytime soon think it's time to go back to jb and has anyone tried this yet?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Ok so I got up to step 11, wiped everything and then accidently rebooted. Now i cant use the steps to get into ss. what do I have to do? mj5 restore?
hipporun said:
Ok so I got up to step 11, wiped everything and then accidently rebooted. Now i cant use the steps to get into ss. what do I have to do? mj5 restore?
Click to expand...
Click to collapse
you mean you rebooted and the SS doesn't even show up?
If not, then just start back from putting in download mode and odin back again. You should get back into safestrap.
Hey guys,
so I had rooted my Note II quite a while back with CM 11 I believe, and all worked well except my GPS didn't work. After every possible fix I just said screw it and went months with no GPS. I finally got sick of it and decided to just start fresh and went back to stock 4.1. My idiot self though did the Verizon updates all the way to 4.3....
I've been reading around and rooting my phone now that it's on 4.3 seems pretty difficult - is there any for sure methods yet so I can root it and if I decide to, flash a ROM?
It's 4.3 currently and the kernel is: 3.0.31
Thanks guys
saferoot is easy and will work if you are running stock MJ9.
Sent from my SM-N900V using XDA Premium 4 mobile app
Reilly1812 said:
saferoot is easy and will work if you are running stock MJ9.
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I found "SafeStrap": http://forum.xda-developers.com/showthread.php?t=2704992
Is this what you're referring to, otherwise, mind pointing me in the direction of "SafeRoot"? Not able to find it.
I tried SafeStrap but after installing and running it on my phone, everything is disabled and it says "State: Not Rooted".
search for saferoot. probably show up in the gs 3 forums. works like a champ once you get past getting the drivers right.
Sent from my SM-N900V using XDA Premium 4 mobile app
Reilly1812 said:
search for saferoot. probably show up in the gs 3 forums. works like a champ once you get past getting the drivers right.
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No luck unfortunately
It started sending the files and then said:
Your kernel is patched!
This device is not supported.
Then it cleans phone up and ends.
If needed, here's the info on the phone i'm running:
Model: SCH-I605
Android Version: 4.3 (Un-rooted)
Kernel Version: 3.0.31: [email protected]#1
Build Number: JSS15J.I605VRUAND3
@Byrne3155,
Because you're on very latest build (VRUAND3), saferoot will not work.
Other users are reporting that they successfully used ODIN to restore their phone to the 4.3/MJ9 build....which saferoot does work for. (See this thread.... http://forum.xda-developers.com/showthread.php?t=2752360 ).
Sent from my SCH-I605 using XDA Premium 4 mobile app
1726
mattnmag said:
@Byrne3155,
Because you're on very latest build (VRUAND3), saferoot will not work.
Other users are reporting that they successfully used ODIN to restore their phone to the 4.3/MJ9 build....which saferoot does work for. (See this thread.... http://forum.xda-developers.com/showthread.php?t=2752360 ).
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm just hitting bad luck apparently. I utilized Odin and followed: Section 1b: How to return to stock 4.X Jelly Bean coming from any rom with Odin
It worked, I confirmed my build is now MJ9:
JSS15J.I605VRUEMJ9
So I downloaded the SafeStrap from this thread (http://forum.xda-developers.com/showthread.php?t=2693131), allowed Unknown source installs, installed it, opened it, and just like before everything is disabled:
State: Not Rooted
Safe system: Not Active
@Byrne3155,
Good job with restoring back to MJ9.
You are confusing safestrap and saferoot---they sound similar but are totally different. safeStrap won't help you gain root access because it's not used to root a phone....it is used to help someone load a custom Rom After gaining root.
You will need to use safeRoot to gain root access. Here's the link to saferoot-- http://forum.xda-developers.com/showthread.php?p=48392009
I would really encourage you to do more reading and really learn the differences between saferoot and safestrap before you do a lot more to your phone. I'd hate to hear you report back later that you ended up bricking your phone.
Good luck if you decide to continue with your rooting adventures .
Sent from my SCH-I605 using XDA Premium 4 mobile app
mattnmag said:
@Byrne3155,
Good job with restoring back to MJ9.
You are confusing safestrap and saferoot---they sound similar but are totally different. safeStrap won't help you gain root access because it's not used to root a phone....it is used to help someone load a custom Rom After gaining root.
You will need to use safeRoot to gain root access. Here's the link to saferoot-- http://forum.xda-developers.com/showthread.php?p=48392009
I would really encourage you to do more reading and really learn the differences between saferoot and safestrap before you do a lot more to your phone. I'd hate to hear you report back later that you ended up bricking your phone.
Good luck if you decide to continue with your rooting adventures .
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yikes, sorry about that I'm an idiot ha. I got the two mixed you're right.
I'm fairly comfortable with rooting and the whole process, but the VZW Note II definitely played tough since I made the error of using the OTA updates all the day zzz.
I'll work on this again later making sure I use correct tool this time (saferoot).
Thanks again