[Q] sound problem / driver backup - Android Q&A, Help & Troubleshooting

hello,
I have the following problem with an android tablet (ainol captain).
For the moment I am using a stock firmware (fw A) where almost everything works good except for the battery.
On another newer stock firmware (fw B) almost everything works good except for the sound when the headset is plugged in.
I tried installing Pimpmyrom in which you can install an 'enchancing' sound driver but it didnt help. The sound did get a bit better. I also tried viper4androidFX with the same 'a bit better' result.
I dont think this is a hardware problem since sound works fine one fw A.
Is it possible to backup the sound driver and/or settings from fw A and install these on fw B?
Any hint/advise on where to start looking? I dont have a lot experience on android but I am willing to try a lot
Thank you
bazzr

I did some more testing and found out that the sound problem on the newer firmware is only when I use external audio like headphones...
I off course tested this with different headphones..all the same problem.
Since in ,for example viper4androidFX, you can make different sound adjustments for external and normal audio I guess these settings are somewhere saved in a file. Any one an idea where I can find this file?
Or any other suggestion is welcome...

Related

Bluetooth Headset not found when scanning

hey all,
first time poster long time reader ... successfully flashed my xperia using a custom rom - but now that i did ... i am trying to scan to find my rocketfish BT headphones... but it cant find them... also tried various other bluetooth devices... any ideas? thanks all... tried looking for a direct answer here but didnt see anything ... sorry if this has been answered a million times!
What ROM are you using mate?
http://forum.xda-developers.com/showthread.php?t=913610
this is the rom - i really want to get my bluetooth working for my rocketfish headphones - do you have any suggestions on roms or any ideas how i can fix this... been driving me nutz.
First try d/l another program from Market to handle your're bluetooth astro bluetooth module or another such.
If not it may be a problem with your flash as I checked the thread and no one else seems to be having that problem. Try re-downloading it and flash again through xrec... full wipe, partition wipe, davlik and battery then flash.
k am trying that - thank you so much for the help! you have no idea - ill let you know how it goes!
no dice - reset everything in xrecovery - still cant pair any bluetooth devices to my phone ... hmm...?? another question... what is the update.zip in xrecovery?
Don't worry about update.zip mate... thats just another way to flash a ROM or an update to selected parts, thats up to the Devs whether they use that or not. =)
That leaves only the bluetooth app from Market or a full reboot.
It may be that you files for bluetooth got corrupted accidentally when you flashed it before... Either way try another ROM theres plenty of good ones out there... I'm a big fan of rdannar/x10 project and he's SuperArc or ASOP... or the trusty Cyanogen...
Just run a repair on PC Companion or SEUS then pick a new one..... remember BACKUP though either with Backup and Restore or MyPhoneExplorer... they're the two I prefer =)
Try the app first though. It should bypass the files
EDIT: And just be careful of the Beta or pre-releases like that ROM was... you get bugs like this, and unless you're into testing Just stick with solid versions
Good Luck mate... Let me know how it works out otherwise I'll dig some more =)

[Q] Why is ICS changing my ringtone?

Hi,
ICS runs fine on my S2 (I´m on LPF right now, very stable ROM), but one thing annoys me a lot: ICS keeps changing my standard ringtone and notification by itself... it somehow seems to be connected to connecting the phone via USB in MTP or storage mode. Other users have the same problem so it´s not a phone issue, but rather ISC. Had the sam problem with a custom rom (Clean Blank Rom) so i guess it´s a core ICS problem. Tied anything, from putting the ringtones to the injternal SD or system/media and tried converting the ringtones from Mp3 to OGG ... still it changes occasionally.
Any hints on how to get to the base of this problem and solve it?
Thanks,
Kusie
P.S.: always do a full wipe before flashing a new ROM, so this is no cache issue
Kusie said:
Hi,
ICS runs fine on my S2 (I´m on LPF right now, very stable ROM), but one thing annoys me a lot: ICS keeps changing my standard ringtone and notification by itself... it somehow seems to be connected to connecting the phone via USB in MTP or storage mode. Other users have the same problem so it´s not a phone issue, but rather ISC. Had the sam problem with a custom rom (Clean Blank Rom) so i guess it´s a core ICS problem. Tied anything, from putting the ringtones to the injternal SD or system/media and tried converting the ringtones from Mp3 to OGG ... still it changes occasionally.
Any hints on how to get to the base of this problem and solve it?
Thanks,
Kusie
P.S.: always do a full wipe before flashing a new ROM, so this is no cache issue
Click to expand...
Click to collapse
I was running on different ICS ROM version (all stock), but never had this issue.
ATM, I am on XWLPD and using mp3 files as standard ringtone and notification sound.
Maybe it is caused by a combination of different things, so that this issue does not affect all ICS users.
It_ler said:
Maybe it is caused by a combination of different things, so that this issue does not effect all ICS users.
Click to expand...
Click to collapse
Most probably, yes... maybe it´s connected to a certain app that is causing this problem... yesterday evening I moved my current custom ringtones and notifications to /system/media/audio and deleted all other ringtones/notifications/alarms from the internal and external SD cards just to check. Did a reboot, changed the rintone and notification to my custom ones and charged the phone over night ... this morning I unplugged it from loader and checked my audio settings and:
ringtone: unknown ringtone (dammit!)
notification: Moonbeam (bummer! not my selected custom notification)
This is driving me crazy.
I´m thinking about going to recovery and wipe cache and dalvik cache - as this is recommended often in the custom Rom section AFTER installing a new rom to avoid troubles - only question is: will this result in any data or app loss?
EDIT: Ok I think I found the culprit: i seems my volume sceduler "Volume Ace" caused the change of ringtone and notify every time it switched to a different audio profile. Deinstalled it and all seems fine....
Greets,
Kusie

Wifi error on Sony style v1.1... help.

Hi
I installed this great rom but cannot enable wifi. After few seconds of "enabling" it stops and says "error".
Someone suggested cleaning memory - not helped
Tried this :
http://forum.xda-developers.com/showthread.php?t=1556810
And
http://forum.xda-developers.com/showthread.php?t=1308285
Nothing changed.
Please help, i dont want to revert to stock ****ty firmware.
You could think of moving to something newer, like ArcMini Nxt, which will also run beautifully on the stock kernel.
SmG67 said:
You could think of moving to something newer, like ArcMini Nxt, which will also run beautifully on the stock kernel.
Click to expand...
Click to collapse
I like the look of sony style very much also i would like to have something that is close to the original. But i have a look on your proposal, maybe i will change my mind.
But so far topic stands - anyone have a solution ?
Maybe try this:
Originally Posted by Theshawty
Oh my god! I should really start googling more! I got my Wifi to work again! What I did was:
I opened up Root Explorer
I went into Data
I went into Misc
I went into Wifi
I deleted the conf file.
I rebooted my phone
Success!
Click to expand...
Click to collapse
SmG67 said:
Maybe try this:
Click to expand...
Click to collapse
Tried. I dont have conf file in that folder. Its empty.
floyyt said:
Tried. I dont have conf file in that folder. Its empty.
Click to expand...
Click to collapse
Try to do a fresh install of the ROM
(Make a backup in Recovery, Flash original firmware, Flash ROM, Check WiFi, do Advanced Restore in Recovery and select Data only)
SmG67 said:
Try to do a fresh install of the ROM
(Make a backup in Recovery, Flash original firmware, Flash ROM, Check WiFi, do Advanced Restore in Recovery and select Data only)
Click to expand...
Click to collapse
Nah, i moved to miniCM7pro, it has only one problem, not that serious, and have practically the same functionality. To many playing with sony style to make wifi useful. Thanks for the tip tho...
check your kernel, is only stock kernel
TeckpZi said:
check your kernel, is only stock kernel
Click to expand...
Click to collapse
I have stock kernel.
Wifi on custom ROMs
Hi
I'm at holidays, so I have spare time and i have a backup mobile, so, at last, I've decided migrating my stock to a newer ROM. I just wanted to be able to use multitouch for zooming images/maps/webs, whilst not loosing any functionality. If I can also use a VPN to connect to work via RDP, ald view streaming flash sites... well, that will be a plus. As my mobile version is pretty new i know I can NOT unlock bootloader, so i can't also change my kernel. No problem... there are some ROMs that will bring me my basic needs. I require Androd 2.2 or newer... can't use ICS ROMs (need to change kernel/bootloader, unadvised for my mimmi). Okay, let's see the alternatives:
I've cheked Xperian Blaze v2, SE_Style v1.1, MiniCM7Pro v21, and Andread 2.3.5 Pro final v3
I've had some problems with one and others, but they all had the same issue: Wifi connection was not working. I've tried to ask in the development threads, but i couldn't (not enough messages), so I had to investigate on my own. Not an android developer, just user.
The last ROM I've checked is the Andread. The problem with others was "error" on trying to turn WIFI on, or turning it on but failing on getting IP, disabling the wifi and enabling it again for restarting process. The problem with Andread was slightly different: it made it all fine (establish connection, authentication, get an IP...), but when you want to use network it doesn't work. Seems to be missing routes or something.
I must say I love these ROMs, all of them. Launcher is not a problem, i always install Nemus (love its dock, folders, and ability to resize widgets), although ARC's one is good enough (way better than mimmi's one, despite being sooo similar)
Ok, ok, my solution: I've made a backup of original system before tests, didn't I? ok, lets extract it and see... I've found than /system/lib/Modules/tiwlan_drv.ko was less than 1Mb in my Andread, but 8.7Mb in my original files' backup. Hummm now it isn't working... What would happen if I overwrite it with older one? Lets try it... copy original one (the one in my backup) to SDCard, then use RootExplorer for mounting /system R/W, copy and overwrite Andread's tiwlan.ko, change it's permissions to match original ones (644), and reboot.
Now I have wifi, and my andread is working fine. I still have to recalibrate battery and replace the DroidSansFallback.TTF with the MIUI's one (so I can read my father-in-law chinese messages), but happy enough.
Not sure if it can work with the other ROMs I've cheked before, or with any other mobile. As far as I've seen in this forum, you always talk about the 2.1.1.A.0.6 SE firmware or the newest 2.1.1.C.0.1. I had the 2.1.1.B.0.1 (yes, it's a B). Not sure if it's due I'm in Spain, or my mobile was bought to Yoigo and not Sony... I always assumed the differences will be so minimal it doesn't mind ^_^
I wish this could help someone.
XiaoMigue said:
Hi
I'm at holidays, so I have spare time and i have a backup mobile, so, at last, I've decided migrating my stock to a newer ROM. I just wanted to be able to use multitouch for zooming images/maps/webs, whilst not loosing any functionality. If I can also use a VPN to connect to work via RDP, ald view streaming flash sites... well, that will be a plus. As my mobile version is pretty new i know I can NOT unlock bootloader, so i can't also change my kernel. No problem... there are some ROMs that will bring me my basic needs. I require Androd 2.2 or newer... can't use ICS ROMs (need to change kernel/bootloader, unadvised for my mimmi). Okay, let's see the alternatives:
I've cheked Xperian Blaze v2, SE_Style v1.1, MiniCM7Pro v21, and Andread 2.3.5 Pro final v3
I've had some problems with one and others, but they all had the same issue: Wifi connection was not working. I've tried to ask in the development threads, but i couldn't (not enough messages), so I had to investigate on my own. Not an android developer, just user.
The last ROM I've checked is the Andread. The problem with others was "error" on trying to turn WIFI on, or turning it on but failing on getting IP, disabling the wifi and enabling it again for restarting process. The problem with Andread was slightly different: it made it all fine (establish connection, authentication, get an IP...), but when you want to use network it doesn't work. Seems to be missing routes or something.
I must say I love these ROMs, all of them. Launcher is not a problem, i always install Nemus (love its dock, folders, and ability to resize widgets), although ARC's one is good enough (way better than mimmi's one, despite being sooo similar)
Ok, ok, my solution: I've made a backup of original system before tests, didn't I? ok, lets extract it and see... I've found than /system/lib/Modules/tiwlan_drv.ko was less than 1Mb in my Andread, but 8.7Mb in my original files' backup. Hummm now it isn't working... What would happen if I overwrite it with older one? Lets try it... copy original one (the one in my backup) to SDCard, then use RootExplorer for mounting /system R/W, copy and overwrite Andread's tiwlan.ko, change it's permissions to match original ones (644), and reboot.
Now I have wifi, and my andread is working fine. I still have to recalibrate battery and replace the DroidSansFallback.TTF with the MIUI's one (so I can read my father-in-law chinese messages), but happy enough.
Not sure if it can work with the other ROMs I've cheked before, or with any other mobile. As far as I've seen in this forum, you always talk about the 2.1.1.A.0.6 SE firmware or the newest 2.1.1.C.0.1. I had the 2.1.1.B.0.1 (yes, it's a B). Not sure if it's due I'm in Spain, or my mobile was bought to Yoigo and not Sony... I always assumed the differences will be so minimal it doesn't mind ^_^
I wish this could help someone.
Click to expand...
Click to collapse
Works perfectly. Big thanks

Bluetooth calls/Google Now not working

Hello, I have problems with no audio and microphone activity when making calls or using Google Now/Assistant with a Bluetooth headset/car head unit.
The problem have persisted for some time now when making calls made via Bluetooth. At first it was limited to bad quality for recipients of my calls, and I blamed this on a new update to an unofficial Oreo ROM (Something PixelExperience).
However it has worsened, and now I cannot hear anything when making calls via Bluetooth, the microphone also seems to be cut off entirely, and the same is the case with Google Assistant.
Music and system audio seems to work just fine.
What I have tried without any luck so far:
A multitude of Oreo ROMS
Stock 26S chinese ROM (had to reinstall TWRP and everything)
Custom EUI 5.9 roms, based om 26S and 28S
A couple of different kernels
I am backup at running Resurrection Remix official Oreo atm.
I hope someone might have a clue at what to try.
If you need logs please let me know, however I am not an avid user of logcat/busybox(/others?) but should probably be able to use them og pointed in the right direction.
Lyngze said:
Hello, I have problems with no audio and microphone activity when making calls or using Google Now/Assistant with a Bluetooth headset/car head unit.
The problem have persisted for some time now when making calls made via Bluetooth. At first it was limited to bad quality for recipients of my calls, and I blamed this on a new update to an unofficial Oreo ROM (Something PixelExperience).
However it has worsened, and now I cannot hear anything when making calls via Bluetooth, the microphone also seems to be cut off entirely, and the same is the case with Google Assistant.
Music and system audio seems to work just fine.
What I have tried without any luck so far:
A multitude of Oreo ROMS
Stock 26S chinese ROM (had to reinstall TWRP and everything)
Custom EUI 5.9 roms, based om 26S and 28S
A couple of different kernels
I am backup at running Resurrection Remix official Oreo atm.
I hope someone might have a clue at what to try.
If you need logs please let me know, however I am not an avid user of logcat/busybox(/others?) but should probably be able to use them og pointed in the right direction.
Click to expand...
Click to collapse
Maybe the mic is broken. If you tried with so much ROMs that's definitely a hardware problem.
LameMonster82 said:
Maybe the mic is broken. If you tried with so much ROMs that's definitely a hardware problem.
Click to expand...
Click to collapse
Thank you for the answer, the microphone is not the problem. I have tested the bluetooth headset using another smartphone with no issues.
The issue also persists with my car head unit, it might be a faulty bluetooth unit, however it works just fine when transfering data and listening to music.
I only experience the problems when trying to use microphone or call using the bluetooth headset.
Lyngze said:
Thank you for the answer, the microphone is not the problem. I have tested the bluetooth headset using another smartphone with no issues.
The issue also persists with my car head unit, it might be a faulty bluetooth unit, however it works just fine when transfering data and listening to music.
I only experience the problems when trying to use microphone or call using the bluetooth headset.
Click to expand...
Click to collapse
I did the following:
Reset and begin from scratch....
-Install TWRP latest version if you have not.
-Make backup external of your data, media, etc.
-Wipe everything cach, system, dalvik, data, internal.
-Restart in recovery.
-Download a EUI 19s rom on PC and transfer to your TWRP map on your phone.
-Install trough TWRP the EUI Rom and let it boot.
-Make the minimalist settings, so the rom is installed on your phone.
-After that go to recovery, choose format your phone.
-Restart recovery.
-Transfer the modem firmware 26S, your choise Oreo rom, and Gapps arm 64, 8.1, nano to your phone.
( Advice: infrag AICP unofficial 20032018 version, bugless)
-install those together without reboot in between.
-After that Reboot system.
When making settings in the rom CHOOSE NEW PHONE, DO NOT DOWNLOAD YOUR SETTINGS TROUGH GOOGLE ACCOUNT and do not install other backups.
Then you will have a total clear phone.
Very much work but it helped me with camera and audio problems.
I hope it does for you too.
Thank you, I will try that when I have some time at the computer, I did All og the above except for installing 19S beforehand.
I have read about another who had similar problems to med, and Foxes them by replacing a systems file. Is there any way of optaining this file without flashing the rom and extracting it? Can I open the rom file directly to extract the file? (Filename was Bluetooth-***.so or something)
Edit: This is the post I al talking about: https://forum.xda-developers.com/le-max-2/help/issues-bt-16s-t3543635
Lyngze said:
Thank you, I will try that when I have some time at the computer, I did All og the above except for installing 19S beforehand.
I have read about another who had similar problems to med, and Foxes them by replacing a systems file. Is there any way of optaining this file without flashing the rom and extracting it? Can I open the rom file directly to extract the file? (Filename was Bluetooth-***.so or something)
Edit: This is the post I al talking about: https://forum.xda-developers.com/le-max-2/help/issues-bt-16s-t3543635
Click to expand...
Click to collapse
It is the Bluetooth file of 15S....That's a very long time ago.
I'm not sure with compatibility.
Very much so, however a similar approach might work with say 19S.
But I don't know how to get the .so file without flashing the rom and copying it from the system directory...
I have now tried installing both Chinese 15S and Indian 19S without any luck, I am still not able to use bluetooth for calling. No sound or microphone what so ever using the bluetooth headset.
Lyngze said:
I have now tried installing both Chinese 15S and Indian 19S without any luck, I am still not able to use bluetooth for calling. No sound or microphone what so ever using the bluetooth headset.
Click to expand...
Click to collapse
Does your bluetooth status says connected (no phone)
in the same post https://forum.xda-developers.com/le-max-2/help/issues-bt-16s-t3543635/page2 pn #12 there is bluetooth so file
try that... it works on every EUI version... to verify .. try EUI 16s (Indian ver) and check your bluetooth device
Thank you for pointing that out!
I have tried with a clean install of the entire 15S ROM without any help.
I tried the .so file with my Oreo system, and now I cannot event turn bluetooth on...
Regarding bluetooth status it just says "connected" followed by battery percentage.
I can turn phone audio on or off without problem, but when turned on there is simply no sound in calls...

[ROM] X96 Air Hybrid AOSP Custom Rom Android 9 [ATV]

this custom rom, i made it for my X96 Air box
- base on X96 stock rom
- latest ATV Google APPs [06-2020]
- hybrid home, easy switch between ATV home and Non ATV Home
- easy direct access ATV app from Non ATV Home
- LiveWallpaper enabled easy Access
- Upgraded Wifi driver from latest OTA update
- clean up by remove all unnecessary app from stock rom
- Home Switcher Support Home from
JesonKung
Launcher3
Xperia
ADW
Lollipop
lawnchair
- replace file explorer
- add setting on TV Launcher
- disable battery status display on launcher widget ( need clear data of launcher app)
- extra icon pack
- and Many other tweaks
- fix broken file management
- remove droidfile
Code:
latest update checksum
//
// File Checksum Integrity Verifier version 2.05.
//
674aa99ffc762f579c38af27e3e2ab6d bullghost-x96air-20210125-signed.zip
for anyone that came from previous version here is the step:
Code:
after flash the update, you just only need to clear /wipe the cache partition.
to install the icon pack, copy the from /vendor/preinstall folder to /sdcard folder
Rom
Download Rom
Hi. Thank you for sharing.
I have been running it for a few hours and I love all the additions of features and the Android TV look (I used Mi Box S before so I prefer this look)
I do have one problem though. On stock firmware, I was able to pass through the audio to my sound bar in kodi (this lets me listen to Dolby Atmos and other surround sound technologies). I tried everything on your rom to make it work but it doesn't seem to work at all.
What worked in stock firmware:
Droid settings - sound - switch it to manual - enable all the options and set DTS to 20%. Go to Kodi, go to Kodi audio settings and enable passthrough, then play a dolby Atmos or DTS file and my soundbar said "Dolby Atmos" or "DTS" whenever I played the respective file.
In your rom:
There are three settings apps. 1 is droid settings from stock firmware, 1 is aosp settings app from stock firmware and 1 is the new settings app with extra features.
I have tried changing the droid settings sound options like on stock firmware but that does not work. I have tried using the new settings apps sound options (tried manual, auto, always allow etc etc) and that does not work either. I'm unable to get passthrough audio.
I always get PCM, even in Atmos/Dolby Digital/DTS files. My sound bar supports all of these codecs, and the box can do passthrough audio as I have already tried it on the stock firmware.
It's possible that it's due to viper4android? But I have disabled the master switch in viper as well.
Sorry for the long post but I was trying to be as detailed as possible. Honestly, apart from this, I have zero issues with your rom. I wanted to use it as a daily driver but this sound output option is a big problem as I watch a lot of 4K movies with Atmos and DTS.
If anyone is considering this rom but don't care about the issue I'm having, go for it. There are no other issues in this rom and is easily a daily driver. Works very well and highly recommended from my end.
Nasty_z said:
Hi. Thank you for sharing.
I have been running it for a few hours and I love all the additions of features and the Android TV look (I used Mi Box S before so I prefer this look)
I do have one problem though. On stock firmware, I was able to pass through the audio to my sound bar in kodi (this lets me listen to Dolby Atmos and other surround sound technologies). I tried everything on your rom to make it work but it doesn't seem to work at all.
What worked in stock firmware:
Droid settings - sound - switch it to manual - enable all the options and set DTS to 20%. Go to Kodi, go to Kodi audio settings and enable passthrough, then play a dolby Atmos or DTS file and my soundbar said "Dolby Atmos" or "DTS" whenever I played the respective file.
In your rom:
There are three settings apps. 1 is droid settings from stock firmware, 1 is aosp settings app from stock firmware and 1 is the new settings app with extra features.
I have tried changing the droid settings sound options like on stock firmware but that does not work. I have tried using the new settings apps sound options (tried manual, auto, always allow etc etc) and that does not work either. I'm unable to get passthrough audio.
I always get PCM, even in Atmos/Dolby Digital/DTS files. My sound bar supports all of these codecs, and the box can do passthrough audio as I have already tried it on the stock firmware.
It's possible that it's due to viper4android? But I have disabled the master switch in viper as well.
Sorry for the long post but I was trying to be as detailed as possible. Honestly, apart from this, I have zero issues with your rom. I wanted to use it as a daily driver but this sound output option is a big problem as I watch a lot of 4K movies with Atmos and DTS.
If anyone is considering this rom but don't care about the issue I'm having, go for it. There are no other issues in this rom and is easily a daily driver. Works very well and highly recommended from my end.
Click to expand...
Click to collapse
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Code:
//
// File Checksum Integrity Verifier version 2.05.
//
c808b36f0fe6b4c68cc869c688d6dbe6 bullghost-x96air-20200630-signed.zip
bullghost said:
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Click to expand...
Click to collapse
I'm downloading this now and will report back.
Something to note: On slimbox ROM, this issue is not there. Slimbox ROM has proper audio passthrough. Maybe that helps in fixing the bug?
bullghost said:
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Click to expand...
Click to collapse
Hi. It works perfectly on the new version!
I tested Atmos, DTS and Dolby Digital. They all work without any issues. Thanks!
The X96 air TV box has four hardware versions P1, P2, V2/P3 and P4. I have P2 hardware, can I install this ROM on my box?
Is it possible to install TWRP recovery with this rom on x96 air?
hoskic said:
Is it possible to install TWRP recovery with this rom on x96 air?
Click to expand...
Click to collapse
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Nasty_z said:
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Click to expand...
Click to collapse
Thanks, worked smooth, I just made backup through TWRP, I guess i can do restore same way?
hoskic said:
Thanks, worked smooth, I just made backup through TWRP, I guess i can do restore same way?
Click to expand...
Click to collapse
Yes exactly. You can restore it the same way, boot into TWRP and use the restore option.
Tried this rom on my TranSpeed 8K Ultra HD S905X3 box but it doesn't get passed the bootup logo. Had it on that screen for more than 15 mins. Am i missing something?
Blaggah said:
Tried this rom on my TranSpeed 8K Ultra HD S905X3 box but it doesn't get passed the bootup logo. Had it on that screen for more than 15 mins. Am i missing something?
Click to expand...
Click to collapse
I believe this rom is specific to X96Air. I think the vendor is exclusive to this model and that's probably what's causing the issue on your box. I suppose you can try to flash slimbox over on the freaktab forums instead.
Thanks for this, I tried the slimbox rom already and it doesn't boot up all the way. The slimbox works better on my S905X2 box.
Hidden WiFI can not be found
Hidden WiFi does not work properly.
[Solved] Select advanced option,enable hidden wifi
【unsolved】The wifi signal is particularly unstable, as if it is a driver problem
Do we expecting some firmware update in the future or this is final version ? Download link seem to be dead had to find this software on other website
Zakariasz said:
Do we expecting some firmware update in the future or this is final version ? Download link seem to be dead had to find this software on other website
Click to expand...
Click to collapse
Download link is fine. I think OP did not enter the link properly as clicking it does not take you to a webpage.
https://sourceforge.net/projects/bullghostdroidtvos/files/release/
With this link and you should be able to download the ROM.
hello please someone told me how to flash this rom ? i get the x96air P3 last day and i want to change rom to watch netflix in HD ? should i instal TWRP first ? i know how to flash phone and instal twrp and rom ... but its my first time in this android box
Hi i just but a x96 air P4 i will try your rom when i receive this box....
Hello,
1. Is this 32 bit or 64 bit ROM?
2. How to enable navigation and status bar in android 9?
Thank you.
Nasty_z said:
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Click to expand...
Click to collapse
Hi, owning this box, we can install TWRP in recovery by flashing with AmlogicFlasherV1.0 and the TWRP.img which is in the archive HERE, beware it will be ROOT before.

Categories

Resources