I was browsing the xiaomi site and I found that it has a download for miui on the "HTC butterfly dna" but I don't know which phone it's for, though the picture of the device is obviously the Verizon DNA, so if anyone wants to try it i'll put the link for the official download and you guys can post the results.
http://en.miui.com/download-206.html
I tried it a few weeks ago, because I was curious. DO NOT FLASH IT.
The ROM works just fine, but it's meant for GSM-only on the Butterfly/DNA. It won't connect to the Verizon network at all, even after modifying the radio settings and doing the *#*#4636#*#* dialer trick to default to CDMA. After you flash it, with any other subsequent ROM you flash afterwards, the radio will still be broken. The only solution to fix it is re-flash the stock recovery and stock radio again.
It probably wouldn't be *too* much work to modify the ROM to make it Verizon-compatible, but I haven't had time to look into it much. All I know is it won't work as is.
---------- Post added at 07:22 PM ---------- Previous post was at 07:12 PM ----------
I should also point out that MIUI for HTC devices is currently based on Android 4.2, so app performance isn't as good as it could be.
Once MIUI is re-based to 4.4, it should be easier to fix the GSM-defaulting issue as well, due to the OS improvements on that front.
Sorry to bring up and old thread...but....would this work on the VZW DNA (unlocked/S-off) using ATT?
ThePunisher said:
Sorry to bring up and old thread...but....would this work on the VZW DNA (unlocked/S-off) using ATT?
Click to expand...
Click to collapse
It should. I've had no problems beforehand.
Sorry to bring up an old thread (deja vu?), but what is the chance we will see MIUI V6 ported to the DNA? I would do it myself but I don't know anything about porting at all. :\
simcardslot said:
It should. I've had no problems beforehand.
Sorry to bring up an old thread (deja vu?), but what is the chance we will see MIUI V6 ported to the DNA? I would do it myself but I don't know anything about porting at all. :\
Click to expand...
Click to collapse
I could do it. As long as we get a MIUI V6 ROM on a working CDMA base, (preferably the VZW HTC One) I could port it over to the DNA no problem.
shoes22 said:
I could do it. As long as we get a MIUI V6 ROM on a working CDMA base, (preferably the VZW HTC One) I could port it over to the DNA no problem.
Click to expand...
Click to collapse
What would it take to get it on a CDMA base, in terms of under the hood code?
shoes22 said:
I could do it. As long as we get a MIUI V6 ROM on a working CDMA base, (preferably the VZW HTC One) I could port it over to the DNA no problem.
Click to expand...
Click to collapse
could you compile/build one for GSM? A lot of us DNA users are using our devices on GSM carriers these days......
Here is a link to the latest MIUI for HTC One (m7)
http://en.miui.com/download-111.html
ThePunisher said:
could you compile/build one for GSM? A lot of us DNA users are using our devices on GSM carriers these days......
Here is a link to the latest MIUI for HTC One (m7)
http://en.miui.com/download-111.html
Click to expand...
Click to collapse
If you have GSM, there should already be a working port for you...
http://en.miui.com/download-206.html
(Haven't tested it personally, but feel free to take a look.)
shoes22 said:
If you have GSM, there should already be a working port for you...
http://en.miui.com/download-206.html
(Haven't tested it personally, but feel free to take a look.)
Click to expand...
Click to collapse
I would love MIUI also but be careful the butterfly is a different phone then ours
shoes22 said:
If you have GSM, there should already be a working port for you...
http://en.miui.com/download-206.html
(Haven't tested it personally, but feel free to take a look.)
Click to expand...
Click to collapse
v4.7.11 reboots when using media content like Gallery apps. I have tried different Gapps packages and playstore apps. all with eh same end result.
The previous version 4.7.4 boots just fine but gives a storage is full error every now and then when trying to install apps.
Sent from my HTC6435LVW using Tapatalk
ThePunisher said:
v4.7.11 hangs at the MIUI bootscreen. It does not matter if you flash the 18mb 4.7.11 update on top of 4.7.4 or flash the full 4.7.11 Rom, same result.
The previous version 4.7.4 boots just fine but gives a storage is full error every now and then when trying to install apps.
Sent from my HTC6435LVW using Tapatalk
Click to expand...
Click to collapse
v.4.7.11 is pretty buggy. After clean flash make wipe cache, dalvik and fix permission from recovery before first launch.
P.S. IMHO v.4.6.13 is the last(most) stable.
Related
I want to introduce to you some new stuff!
# STOCK to KEXEC #
This is a patch to boot any Stock-based rom via Kexec. The kernel was made by the STS-Dev-Team (Hashcode & Dhacker) and I just fixed some small things, nothing special.
It can be useful in example for GSM-Users who want to run .16 VZW Based Roms. Now you don't have to wipe your CID anymore. Just keep your stock EU kernel and be able to run the VZW Roms!
Note: This kernel is NOT modified! No OC or sth like that! I am currently working on a stock-mod kernel!
This will NOT work on normal stock rom! You MUST use a stock-based rom!
May not work for CHINESE Rom!
Instructions
Download the patch (Selection depends on your device/rom - CDMA or GSM based rom)
Reboot into recovery and flash it over your stock-based rom
Reboot
Enjoy
Note: BMM users, make sure you have KEXEC enabled in boot options!
Click to expand...
Click to collapse
# GSM/CDMA Patch #
THis patch is for stock-based roms!
Feature:
Patch a stock-based CDMA Rom to GSM
Patch a stock-based GSM Rom to CDMA
Instructions
Download the patch you need
Flash it over your stock-based rom
Reboot
Enjoy
Click to expand...
Click to collapse
Downloads
KLICK
Click to expand...
Click to collapse
NEWS
I am currently working on a direct port of JBX-Kernel for Stock roms - better saying it already works so far. But have to do some fixes and mods because battery seems not that good as it should.
SOURCE: https://github.com/dtrail/kernel_mapphone_kexec/tree/stock-mod
[Also in branch "test" you can find current progress]
Click to expand...
Click to collapse
KERNEL SOURCE
https://github.com/dtrail/kernel_mapphone_kexec/tree/stock-jb-kexec
CREDITS
STS-Dev-Team (Hashcode & Dhacker)
Devehmanish
alteredlikeness
Ravikirancg
artur0588 - for providing a fixed GSM Patch!
So I'm a gsm latam user. If I want to use a cdma rom, let's say Bionx, I need to flash rom, then patch for radio and finally kexec patch?
Sent from my XT910 using Tapatalk 2
Okay still trying to read up on all this awesome news. Just a few questions.
I'm going to flash catalyst ROM and I'm on CDMA .16 . I'm going to download the patch witch takes me from CDMA to GSM.. correct? Then install ROM as normal then flash the CDMA to GSM patch then reboot phone? Is that correct order? Or should I do diffrentley?
Sent from my DROID RAZR using Tapatalk 4 Beta
ddmclw said:
Okay still trying to read up on all this awesome news. Just a few questions.
I'm going to flash catalyst ROM and I'm on CDMA .16 . I'm going to download the patch witch takes me from CDMA to GSM.. correct? Then install ROM as normal then flash the CDMA to GSM patch then reboot phone? Is that correct order? Or should I do diffrentley?
Sent from my DROID RAZR using Tapatalk 4 Beta
Click to expand...
Click to collapse
I am also had a qustion sam with you, i am using china stock rom and already dele my CID, will it aviliable to patch to kexx?
Sent from my XT910 using Tapatalk 2
Please read the FULL post!
No need for CID wipe!
Yes, its correct like you said. Just see the downloads, the names should explain itself.
And also keep in mind that you may not be able to safe APN on CDMA to GSM patch (at least on catalyst) but maybe it works for you...
If someone has any idea to fix it, tell me. Or if someone wnats to help, I will send you something you can try around.
Ok I installed eclipse rom which is based on verizon .16 and I'm on latam .17 so far is workig ok,time for some heavy duty testing,thanks mate.
Sent from my DROID RAZR using xda premium
A big congratulations to d trail and everyone else involved this is great news indeed.
I'm sure allot of people will relate to this , being stuck on eu jb and NOT BEING ABLE to flash vrzn and China stock roms - until now
Thank you so much
Edit; just booted eclipse rom working flawlessly
Sent from my XT910 using xda app-developers app
dtrail1 said:
Please read the FULL post!
No need for CID wipe!
Yes, its correct like you said. Just see the downloads, the names should explain itself.
And also keep in mind that you may not be able to safe APN on CDMA to GSM patch (at least on catalyst) but maybe it works for you...
If someone has any idea to fix it, tell me. Or if someone wnats to help, I will send you something you can try around.
Click to expand...
Click to collapse
I did it long time ago, and you don't need libs. Full cdma to gsm patch made by me here http://d-h.st/2Bv. Working with any leak and official verizon rom.
By the way, kexec patch do not working with chinse rom.
artur0588 said:
I did it long time ago, and you don't need libs. Full cdma to gsm patch made by me here http://d-h.st/2Bv. Working with any leak and official verizon rom.
By the way, kexec patch do not working with chinse rom.
Click to expand...
Click to collapse
Hi Artur, may i ask which version of Chinese rom you use? 4.1.2-6.7.2_GC-404-430?
lzto1320 said:
hi artur, may i ask which version of chinese rom you use? 4.1.2-6.7.2_gc-404-430?
Click to expand...
Click to collapse
6.7.2_gc-384-spdu-801
Say true verizon JB ROMS also have not boot with CDMA kexec patch and GSM kexec patch. May be kexec kernel do not support init.d with symsearch.ko module?
Finally i boot my ARTMOD for DROID RAZR XT912 on my EMEA RAZR XT910 with stock EMEA kernel after removed init.d which load symsearch.ko module. It's a little strange that stock 16 VZW support symsearch.ko but kexec not.
artur0588 said:
6.7.2_gc-384-spdu-801
Click to expand...
Click to collapse
Chinese has released a final JB firmwares,fix some bugs more faster and stable, if drail's patch working, you can give a try, it's worth man.
Lzto1320 said:
Chinese has released a final JB firmwares,fix some bugs more faster and stable, if drail's patch working, you can give a try, it's worth man.
Click to expand...
Click to collapse
Chinese kernel is always different from all other kernels - have always been like that... if someone might drop me a source I will build it for kexec.
dtrail1 said:
Chinese kernel is always different from all other kernels - have always been like that... if someone might drop me a source I will build it for kexec.
Click to expand...
Click to collapse
thank you very much dtrail1,here is the firmware link, i'm not sure if it can be help.
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-404-430-release-keys-ChinaRetail-CN_chn.tar.gz
http://pan.baidu.com/share/link?shareid=452390&uk=1849135075
Lzto1320 said:
thank you very much dtrail1,here is the firmware link, i'm not sure if it can be help.
fastboot-p2b_spyder-umts_spyder-user-4.1.2-6.7.2_GC-404-430-release-keys-ChinaRetail-CN_chn.tar.gz
http://pan.baidu.com/share/link?shareid=452390&uk=1849135075
Click to expand...
Click to collapse
Not the firmware, the SOURCE for the KERNEL.
artur0588 said:
I did it long time ago, and you don't need libs. Full cdma to gsm patch made by me here http://d-h.st/2Bv. Working with any leak and official verizon rom.
By the way, kexec patch do not working with chinse rom.
Click to expand...
Click to collapse
thanks for the link, I'll try it.
But I tried it also without the libs and it started acting crazy for me.. I remember that my old GSM Patch (that one for ICS AOSP ROms from last year) worked w/o libs (partly)...
dtrail1 said:
thanks for the link, I'll try it.
But I tried it also without the libs and it started acting crazy for me.. I remember that my old GSM Patch (that one for ICS AOSP ROms from last year) worked w/o libs (partly)...
Click to expand...
Click to collapse
Now the GSM Patch will not need libs again, just modify build.prop is working good.artur0588 make it.
Lzto1320 said:
Now the GSM Patch will not need libs again, just modify build.prop is working good.artur0588 make it.
Click to expand...
Click to collapse
you tried it already? APN woprks?
dtrail1 said:
you tried it already? APN woprks?
Click to expand...
Click to collapse
yes, it has been a long time.....
Lzto1320 said:
yes, it has been a long time.....
Click to expand...
Click to collapse
You mean you didn't test it NOW?
Edit: btw, artur, you just posted my old GSM patch build.prop (see my name a hundred times in it)
dtrail1 said:
You mean you didn't test it NOW?
Click to expand...
Click to collapse
artur has given answer.
Take a deep read at http://www.xda-developers.com/android/from-the-bbq-omnirom/
Anyways,here's my build
Build1:
http://www.androidfilehost.com/?fid=23159073880936389
I don't have a device,but would like testers
If it works decently I will ask to have shooteru into the official devices
GPL Compliance:
https://github.com/Evervolv/android_kernel_htc_msm8660/tree/jellybean-4.3 with F2FS changes found in http://review.evervolv.com/#/q/status:open,n,z
Not Working:
Camera(doesn't work fully)
Camcorder
GPS(please test)
3D Playback and recording
Signal Stregth
helicopter88 said:
Take a deep read at http://www.xda-developers.com/android/from-the-bbq-omnirom/
Anyways,here's my build
http://www.androidfilehost.com/?fid=23159073880936375
I don't have a device,but would like testers
If it works decently I will ask to have shooteru into the official devices
GPL Compliance:
https://github.com/Evervolv/android_kernel_htc_msm8660/tree/jellybean-4.3
Click to expand...
Click to collapse
Hello,
can't wait to test this new rom but the download link seems to be wrong for me ... I've checked on you're androidfilehost account and download this from toady in replacement, is that good ? http://www.androidfilehost.com/?fid=23159073880936363
Lyok0ne said:
Hello,
can't wait to test this new rom but the download link seems to be wrong for me ... I've checked on you're androidfilehost account and download this from toady in replacement, is that good ? http://www.androidfilehost.com/?fid=23159073880936363
Click to expand...
Click to collapse
Yes,that file is right
That seems to be a 4.3 Evervolv build. Am I missing something?
The new link is http://www.androidfilehost.com/?fid=23159073880936389
Arbelzapf said:
That seems to be a 4.3 Evervolv build. Am I missing something?
Click to expand...
Click to collapse
I don't think so..omnirom of course is always android and the appearence is similar in every versions..but I think that is a different concept on a programmative side. Finally a real android open-source? read from the link in the first post to know better how does this project consists in (if you really downloaded en evervolv rom, try the link right above my post, it works)
helicopter88 said:
The new link is http://www.androidfilehost.com/?fid=23159073880936389
Click to expand...
Click to collapse
Domenico you are fantastic. Please never leave our evo 3D!!!! Thank's to you we can have the latest versions of wonderful projects like omnirom in a very short time after they are announced. Simply the best!
Well,my evo is gone,and I'm gonna buy a nexus 5(please google hurry up!)
Since hopefully working on the n5 will be boring and not fun as its on the evo I might port 4.4 or whatever comes next
gigsaw said:
I don't think so..omnirom of course is always android and the appearence is similar in every versions..but I think that is a different concept on a programmative side. Finally a real android open-source? read from the link in the first post to know better how does this project consists in (if you really downloaded en evervolv rom, try the link right above my post, it works)
Click to expand...
Click to collapse
Well the evervolv default wallpaper and the evervolv name all across "About phone" led me to that bold conclusion. I'll try the new link now
Arbelzapf said:
Well the evervolv default wallpaper and the evervolv name all across "About phone" led me to that bold conclusion. I'll try the new link now
Click to expand...
Click to collapse
Omnirom for now lacks most customization,it's still a big WIP,and I used evervolv device trees(with my edits,tho)
don't be surprised if it says ev all over the place
helicopter88 said:
Well,my evo is gone,and I'm gonna buy a nexus 5(please google hurry up!)
Since hopefully working on the n5 will be boring and not fun as its on the evo I might port 4.4 or whatever comes next
Click to expand...
Click to collapse
Yeah even me was interested in nexus 5, even if today didn't come out anything from google..but max in a couple of week will be out for sure, let's see :fingers-crossed: of course working on a device AOSP listed is easier (fully working rom, a recent kernel available, bootloaders factory unlocked without nonsense HTC restrictions)..but working on evo 3D gives more satisfaction LoL So now you are developing in a "blind way", I mean without a phisical device..and you roms boot!! I am impressed Good luck for the 4.4 developing , hope to see in future
Rom still isn't bugless,don't send me PMs with bugs,I already know what is broken
Anyways
Little(quite big tho) experiment
Take a read at http://www.linux.org/threads/flash-friendly-file-system-f2fs.4477/
This file system by default is used on motorola moto x and together with @namenlos we found that it delivers better performance also on our little evo.
As (I hope) most of you know,formatting to a different file system requires a set of utils,thus a different recovery and the loss of all of your data.
I didn't find any good reason to make all of you erase all your data,flash a different recovery and running manually format lines,so I came with a different flashing method..
It is more complex than usual and might not work fine(remember,no device,so no testing)
Download https://www.dropbox.com/s/utdclidhbi4yokp/first.zip and https://www.dropbox.com/s/dkj9n7jb8u1i2vp/second.zip and http://www.androidfilehost.com/?fid=23159073880937120 and place 'em on your SD card
tl:dr:
Flash first.zip,once it ends reboot to recovery,wait for it to reboot,boot again to recovery and flash f2fs.zip
Click to expand...
Click to collapse
Here's a little insight
First zip does the following things:
Make a backup of your /data(make sure you have 1.2 GB free on your SD)
Make a backup of your recovery
Flash a custom TWRP made to work with F2FS
And adds a custom openrecoveryscript to tell the special recovery to flash second.zip(ensure you have it in root of your sd)
Asks you to reboot to recovery(please do it)
Click to expand...
Click to collapse
Once you reboot,custom TWRP starts,reads the script that tells it to flash second.zip
Second zip does the following:
Format as F2FS /data and /cache
Restore your data
Restore your recovery
Reboot(you should then pull the battery and reboot to recovery)
Click to expand...
Click to collapse
From your recovery,flash "f2fs.zip" which is the rom itself,reboot and enjoy
NOTE:
Kernel is not evervolv,it's a hybrid between a old johnnyslt with tweaks,new EV and my various changes
https://github.com/helicopter88/android_kernel_htc_msm8660/tree/jellybean-4.3
Oh yes fantastic file system on the moto x huge gains in performance for a dual core processor, battery performance is unbelievable, 5 hours screen time and you'll still have power left over, loving mine
Sent on my Moto X
I am willing to test it but one thing prevents me from doing that (apart from a lack of free time). How do I get back to the standard FS? do I just restore the backup i would create in the recovery?
decemberhayes said:
I am willing to test it but one thing prevents me from doing that (apart from a lack of free time). How do I get back to the standard FS? do I just restore the backup i would create in the recovery?
Click to expand...
Click to collapse
It doesn't work,no need to try
in that case I am waiting for another build. I will be happy to test it
To go back to the old Rom you might have to restore the recovery first. Just go into fastboot usb mode and flash the official recovery. Then you can restore your backup comfortably in TWRP for sure. IIRC it should also work on the modified TWRP, at least when I tested it.
+1 for the ROM,
would love to see ION kernel and working Camera,
like in Dastin's CDMA Kernels.
milestone97 said:
[…]would love to see ION kernel and working Camera,
like in Dastin's CDMA Kernels.
Click to expand...
Click to collapse
What lead you to those false assumptions that there is a AOSP Kernel around with ION and camera working (for Sensation or Evo 3d)?
http://www.androidfilehost.com/?fid=23203820527943749
Special package here,it's a secret + secret changes package,it's not omni,but if it boots you'll have fun
Now I'm curious ;D
This Patch Is For 4.3 TW International Based Roms. It Will Not Work With 4.4 TW KitKat Roms!!
Works on:
[XXUEMK8] [XXUEMKF] [XXUEML1] [XXUEML6] [XXUEML9] [XXUENA4] International Based Roms
This is a Patch for TW 4.3 XXUE International Base Roms to work on 4.3 Verizon S4 with MDK firmware and custom recovery. There is a Minimum Patch which does not change the build.prop or contacts or dialer but some features of verizon will not work such as the ability to change from global mode to cdma/lte only mode and the signal icons will be international version not the verzion ones. Use this patch if the rom you are using is heavily themed. The Full Patch changers build.prop and flashes stock versions of the international dark dialer and contacts that will maintain more verizon functions along with using vzw signal icons and the ability to change from global mode and cdma/lte only mode. Use this patch to make the rom the most compatible with verizon. Both patches contain a modified version of the International dark themed SecMms.apk which works to receive both sms and mms and group messages. This app is required and cannot be changed so if the rom has a themed messaging app it will be replaced with mine. Sorry but thats the way it is.
THESE ARE NOT MY ROMS OR KERNALS I DONT HAVE ALL THE ANSWERS IF SOMETHING DOES NOT WORK I AM NOT RESPONSIBLE!
Instructions:
1: Download An International Rom [XXUEMK8] [XXUEMKF] [XXUEML1] [XXUEML6] [XXUEML9] [XXUENA4]
2: Download :
VZW_PATCH_FULL.zip
md5: 5965c22ff9472db3f4a1affe0d53cb4e
IMS_VZW_PATCH_FULL.zip (Use If You Get IMS Framework FC)
md5: f77a458873a285eac0236d0bfb89cc5b
VZW_PATCH_MINIMUM.zip
md5: 4d52a469594d21204a4d8b54ae38d590
SafeStrap Patches
VZW_PATCH_FULL_SS.zip
md5: bc5eb31498b4efe2a64bdad0181167e3
IMS_VZW_PATCH_FULL_SS.zip (Use If You Get IMS Framework FC)
md5: f77a458873a285eac0236d0bfb89cc5b
VZW_PATCH_MINIMUM_SS.zip
md5: 140b1bbe44b7be9ff5dfe6cec9239372
3: Install [XXUEMK8] [XXUEMKF] [XXUEML1] [XXUEML6] [XXUEML9] [XXUENA4] International Rom in recovery(Do Not reboot yet!)
4: Install VZW Patch Full Or Minimum
5: Reboot
6: Go through Setup
7: Reboot(Do Not Fix Root If it ask when rebooting)
8: Enjoy
9: If having issues try Installing KT-SGS4 Jellybean Kernel by ktoonsez (install after you install rom and before you reboot)
10: Download TW 4.3 KT-SGS4 Jellybean Kernel By ktoonsez (go there and thank him for letting me use it)
Should Have 4.3 Rom with Data and MMS working
And with this, you're able to keep the custom bootloader?
Velocifero said:
And with this, you're able to keep the custom bootloader?
Click to expand...
Click to collapse
Yes
Also, is there a root method for this after installing?
Velocifero said:
Also, is there a root method for this after installing?
Click to expand...
Click to collapse
Its rooted
You sir, are the man!! Thank you!!
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Works! Here's a screenshot. Only issue I see so far is when you reboot the phone, WIFI forgets any connected network.
Velocifero said:
Works! Here's a screenshot. Only issue I see so far is when you reboot the phone, WIFI forgets any connected network.
Click to expand...
Click to collapse
Can anyone confirm/deny the Samsung Apps app is included and working. I am on Old&Slows rom and I can't for the life of me get the dam thing to work.
Velocifero said:
Works! Here's a screenshot. Only issue I see so far is when you reboot the phone, WIFI forgets any connected network.
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?p=47262471
Curious if anyone has used this method to flash some of the custom ROMs. I'd love to see some of the international ROMs running on our device.
Sent from my SCH-I545 using Tapatalk
Seems great, except no WiFi. Anyone else having issues getting it to turn back on?
Other issues I've seen is sometimes it'll take 2-3 minutes to boot up. There could be an explanation for this that I'm not aware of. It's also froze on me while charging. Screen was still off but nothing I could do would unlock it but the red LED indicator light was responding to the charge plug still.
cvondra said:
Can anyone confirm/deny the Samsung Apps app is included and working. I am on Old&Slows rom and I can't for the life of me get the dam thing to work.
Click to expand...
Click to collapse
Samsung Apps did not come preinstalled on this ROM but after installing it from their website, it seems to be working fine.
Ironclad Lou said:
Try this:
http://forum.xda-developers.com/showthread.php?p=47262471
Curious if anyone has used this method to flash some of the custom ROMs. I'd love to see some of the international ROMs running on our device.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
This worked, thanks! Not having wi-fi or even intermittent wi-fi would have been a deal breaker.
---------- Post added at 04:17 PM ---------- Previous post was at 04:15 PM ----------
pbrauer said:
Seems great, except no WiFi. Anyone else having issues getting it to turn back on?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=47262471
Ironclad Lou said:
Try this:
http://forum.xda-developers.com/showthread.php?p=47262471
Curious if anyone has used this method to flash some of the custom ROMs. I'd love to see some of the international ROMs running on our device.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
That did the trick! Thanks, forgot all about that thread for fixing the problem on the SIII, so good to know that it works here too.
And still have root!
---------- Post added at 09:51 PM ---------- Previous post was at 09:30 PM ----------
Velocifero said:
Samsung Apps did not come preinstalled on this ROM but after installing it from their website, it seems to be working fine.
[/COLOR]
http://forum.xda-developers.com/showthread.php?p=47262471
Click to expand...
Click to collapse
Where did you find the Samsung Apps?
Phone froze again with the screen off. This time I was pressing the power button on and off, testing the lag of the lockscreen. One more time and I'm going back to Eclipse! Also, AdBlock doesn't work on Android 4.3 so I'm trying Adblock Plus in the meantime. https://adblockplus.org/en/android-install
*edit* Aaaand it froze again for the 3rd time. Back to Eclipse. I can't take this instability.
pbrauer said:
Where did you find the Samsung Apps?
Click to expand...
Click to collapse
Go to www.samsungapps.com on your phone, it's easier from there.
can we restore nandroid backup and restore it if we dont like this
chuckboy1129 said:
can we restore nandroid backup and restore it if we dont like this
Click to expand...
Click to collapse
Yea I've done it on my homeboy wife's s4.
Sent from my Beastly powered Hyperdrive S4 using Tapatalk 4
Dang Holla....is there any Rom you do not flash? You are a crack-flashing machine bro. But thanks for all the help you give in all these threads
Sent fom my Mobile Beast Device
So are you guys trying these other international ones?
Sent from my SCH-I545 using Tapatalk
ahoslc said:
So are you guys trying these other international ones?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
I'm running Phoenix Rom using this method, working pretty well.
Sent from my SCH-I545 using xda app-developers app
ThugosaurusRex said:
I'm running Phoenix Rom using this method, working pretty well.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
That's what I'm about to try.
Sent from my SCH-I545 using Tapatalk
By chance can you point me in the right direction to check some of these international roms out. Might want to give this a try also.
Sent from my SCH-I545 using xda app-developers app
Unoffical Candy5
This rom has been ported for gsm uers on ls990
Flashing Instructions:
Make a backup if you don't have one
Perform a FULL WIPE from another ROM
flash -candy5-RC.v0.9.0-DARK-UNOFFICIAL
Then flash candy5-gsm-patch
Flash whatever GAPPS you want I don't care
Gsm users got to settings/more/Cellular networks/Access Point Names and choose your apn and then reboot
Credits goes to the Candy Team this is just a port for gsm users
Download Links
candy5-rc-dark - http://d-h.st/QT9l
candy gsm patch - http://d-h.st/001
If you would like to donate,but by all means not necessary you can paypal or google wallet - [email protected]
Sorry of this post looks like crap I did from my mobile app
Nice!!!! Now "we" just need to get stock zv8 on gsm. Great job dude!!!!
::::::;;;;;;;;;;;;;
1619415 said:
Nice!!!! Now "we" just need to get stock zv8 on gsm. Great job dude!!!!
Click to expand...
Click to collapse
Working on that too
That would be quite stellar... However for the time being, thanks for this, need a new network...
Sent from my LGLS990 using XDA Free mobile app
Make sure you flash the patch too everyone
CDMA without gsm patch?
Will this fix work on all cm12 roms or just this rom? Also is there any way I can make it work on official cm12?
shivaagarwal1 said:
Will this fix work on all cm12 roms or just this rom? Also is there any way I can make it work on official cm12?
Click to expand...
Click to collapse
No this is based off d851 T-Mobile.
thznutz87 said:
CDMA without gsm patch?
Click to expand...
Click to collapse
No this is gms ROM the patch is really for just the driver files
So I've never dealt with this gsm & APN settings stuff before. I just dl a rom for my device, flash it & go. So does that mean that this is totally not for me & I can't flash, or can I flash it & it'll run on sprint like most other roms?
aheeejd said:
So I've never dealt with this gsm & APN settings stuff before. I just dl a rom for my device, flash it & go. So does that mean that this is totally not for me & I can't flash, or can I flash it & it'll run on sprint like most other roms?
Click to expand...
Click to collapse
This is for gsm users only
OK so Im just seeing this ... Is your DU ROM a gsm port too ? Is the gsm.prop the same as in the DU post or should I download and use the one in op ?
steeldonkey1 said:
OK so Im just seeing this ... Is your DU ROM a gsm port too ? Is the gsm.prop the same as in the DU post or should I download and use the one in op ?
Click to expand...
Click to collapse
Yes DU is a port too. I just wanted to give another option for people. But I'm not running this I'm running DU. If you try this you have to flash the patch for this as soon as I learn how to pack this crap in the system-new.dat we won't have all these zips
D-FUSE said:
Yes DU is a port too. I just wanted to give another option for people. But I'm not running this I'm running DU. If you try this you have to flash the patch for this as soon as I learn how to pack this crap in the system-new.dat we won't have all these zips
Click to expand...
Click to collapse
OK cool just wanted to make sure I wasn't missing anything lol
eh.. im still using zv4 from the very begining, and i always using gsm..
so, now i think, is it true that every custom rom that doesn't have "gsm port" on their title label aren't capable for using gsm??
and i must use a ported gsm of custom rom in my case??
i'm sorry, still a newcomer..
NFC
NFC is not working, also this is cyanogenmod 12 base.
wawa9292 said:
eh.. im still using zv4 from the very begining, and i always using gsm..
so, now i think, is it true that every custom rom that doesn't have "gsm port" on their title label aren't capable for using gsm??
and i must use a ported gsm of custom rom in my case??
i'm sorry, still a newcomer..
Click to expand...
Click to collapse
Yeah porting these roms makes it a lot easier on gsm users.
jannmedia said:
NFC is not working, also this is cyanogenmod 12 base.
Click to expand...
Click to collapse
Yes this is cm12 base and yes NFC doesn't work. Doesn't work on my DU. That is next on the list to fix
Good job
D-FUSE said:
Yes this is cm12 base and yes NFC doesn't work. Doesn't work on my DU. That is next on the list to fix
Click to expand...
Click to collapse
Its working good in GSM, nice job
Yes guys, it's here. I have ported Cyanogenmod 11 to our Desire 610. Just flash it normally through TWRP and you should be find. BTW, I ported it using slimkat. Thanks Zihan!
FLASH AT OWN RISK
BUG LIST:
Front+Rear Cameras not working
You tell me!
This rom needs testers so anyone please give it a shot and update that buglist please!!!
DOWNLOAD LINK BELOW: (ITS THROUGH MEGA)
https://mega.nz/#!lY9g1JYL!bjndT25FD-BiBgaDx5iyV_gwiUXQrKHCaBuDZvXfeYc
To download to phone storage, on your browser, go to settings, or 3 little dots and check desktop view. (transfer to sd or keep on internal but don't wipe internal mem before flashing)
If the rom at least works, I'll try building CM12.1, so test it people!
UPDATE: 11/8/15
Hey guys, just ported the rom again.
Hopefully bootloop is fixed. Its on mega again and I think it may work. I modified boot.img so it will probably work.
Please test!
LINK BELOW:
https://mega.nz/#!gQsjGBDT!KqWeNTO8hExnStEY7U5IHpdqqwnZhyZ67LmlnbOknsU
I'm getting bootlooped after installing it on my european a3ul. :/
Great work though, this phone is in dying need of dev support.
Bootloop
Okay, I'll look at the port and I'll probably re port it again with a different method
Thats nice guys, will flash this If u fix the bootloop.
But can we expect maybe cm12?
Best reagrds.
Next Weekend Maybe will fix bootloop
termiator said:
Thats nice guys, will flash this If u fix the bootloop.
But can we expect maybe cm12?
Best reagrds.
Click to expand...
Click to collapse
Hey guys,
I have school tomorrow. If I have extra time during these 5 days, I will look into the bootloop. But the updated rom will probably be released on the weekend, when I have the time to port it again.
And yes, you could expect CM 12.1 soon, as I probably will build from source, but right now I'm focusing on CM11. But CM 12.1 will be coming in about 2-3 months or less.
Magicstick5
What about the system, we want to wipe that right
Sent from my HTC Desire 610 using XDA Free mobile app
then the rom works for AT & T? Or have bootloop for all?
CM11 and if it works
Hi guys,
So, CM11 for the Desire 610 needs testers. I have not tested yet because for some schoolwork, I need a camera, and the camera is obviously not working, as I stated because the port rom had camera issues too AND ALSO MOBILE DATA ISSUES. The rom could work on the US and other regions versions of this phone too. So if it works for your phone, just post on this thread. And you could also test it to see for yourself.
I will probably test tommorow though
MGfusion said:
What about the system, we want to wipe that right
Sent from my HTC Desire 610 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, wipe system too. If you need more help, just google how to flash a rom highonandroid
Bootloop
Next weekend bootloop will be fixed
btw You can also try slimkat, its not very buggy, only speaker phone issues and camera, but just use a 3rd part camera app
I was getting text messaging issues, it the only reason I stoped using the slimkat Rom
Sent from my HTC Desire 610 using XDA Free mobile app
---------- Post added at 11:18 PM ---------- Previous post was at 11:17 PM ----------
Also this Rom does not work on us variant, i tested it and got the cm boot screen, and nothing else. It is good progress tho, I wouldn't even know where to start
Sent from my HTC Desire 610 using XDA Free mobile app
MGfusion said:
I was getting text messaging issues, it the only reason I stoped using the slimkat Rom
Sent from my HTC Desire 610 using XDA Free mobile app
---------- Post added at 11:18 PM ---------- Previous post was at 11:17 PM ----------
Also this Rom does not work on us variant, i tested it and got the cm boot screen, and nothing else. It is good progress tho, I wouldn't even know where to start
Sent from my HTC Desire 610 using XDA Free mobile app
Click to expand...
Click to collapse
I had a quick try of this last night. Turns out it has the same bootloop problems I had when I ported cm11 over slimkat a couple of months ago. When I tried, I fixed the bootloop OK but then kept getting system ui force close because of some problem with surface flinger. After some research I came to the conclusion that to successfully port other roms we first need a cm base built from source. Hopefully @magicstick5 can work some magic that I could not. In the meanwhile I will keep trying to build it from source(I've got it booting but not much working yet).
MiniBlu
MiniBlu said:
I had a quick try of this last night. Turns out it has the same bootloop problems I had when I ported cm11 over slimkat a couple of months ago. When I tried, I fixed the bootloop OK but then kept getting system ui force close because of some problem with surface flinger. After some research I came to the conclusion that to successfully port other roms we first need a cm base built from source. Hopefully @magicstick5 can work some magic that I could not. In the meanwhile I will keep trying to build it from source(I've got it booting but not much working yet).
MiniBlu[/QUOTE
I can try to port agilain next weekend. I read that you just need a already built tom for your phone which for us, is slimkat
Click to expand...
Click to collapse
Just wondering has anymore progress been made yet? Just curious cause I really want to use the cyanogenmod
Sent from my HTC Desire 610 using XDA Free mobile app
boot.img contains kernel and others files needed to startup our device, right? How about changing the boot.img from stock to the rom? Mb this will help fix the bootloop?
termiator said:
boot.img contains kernel and others files needed to startup our device, right? How about changing the boot.img from stock to the rom? Mb this will help fix the bootloop?
Click to expand...
Click to collapse
This rom is ported from slimrom which already contains stock kernel(boot.img).
Yea same, even the apps don't work, when I copy the apps from /priv-app and /app to a slimkat rom.
magicstick5 said:
MiniBlu said:
I had a quick try of this last night. Turns out it has the same bootloop problems I had when I ported cm11 over slimkat a couple of months ago. When I tried, I fixed the bootloop OK but then kept getting system ui force close because of some problem with surface flinger. After some research I came to the conclusion that to successfully port other roms we first need a cm base built from source. Hopefully @magicstick5 can work some magic that I could not. In the meanwhile I will keep trying to build it from source(I've got it booting but not much working yet).
MiniBlu[/QUOTE
I can try to port agilain next weekend. I read that you just need a already built tom for your phone which for us, is slimkat
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Stay tuned. Real cm11 built from source coming soon.
Darrennchan8 said:
Yea same, even the apps don't work, when I copy the apps from /priv-app and /app to a slimkat rom.
Click to expand...
Click to collapse
Ported againg
magicstick5 said:
MiniBlu said:
I had a quick try of this last night. Turns out it has the same bootloop problems I had when I ported cm11 over slimkat a couple of months ago. When I tried, I fixed the bootloop OK but then kept getting system ui force close because of some problem with surface flinger. After some research I came to the conclusion that to successfully port other roms we first need a cm base built from source. Hopefully @magicstick5 can work some magic that I could not. In the meanwhile I will keep trying to build it from source(I've got it booting but not much working yet).
MiniBlu[/QUOTE
I can try to port agilain next weekend. I read that you just need a already built tom for your phone which for us, is slimkat
Click to expand...
Click to collapse
Okay guys, I got some free time and ported again. It successfully booted! But....it's not usable As soon as it got into the home screen, the systemui started crashing preventing me from doing anything. I had to reboot and flash slim again. I'll try porting with a different method though. Stay tuned
Click to expand...
Click to collapse
Nevermind
Guys, theres an update on my first post for the rom. Try that one out. Just ported it again on Sunday