#I just found this app today. This app is developed by xda member anandbibek all credits due to him.
I tested this app on our galaxy y and it works fine.#
Notify Me! v2 is a lockscreen notification rendering app
derived from the previous project NotifyMe! by TpmKranz.
The XDA thread by original author on previous version can be found here : http://forum.xda-developers.com/showthread.php?t=2173226
This new version contains some bug fixes, improvements and new features as an addition on the original project.
Features present since version 1.9.1 of project
---------------------------------------------------------
• Display notification popup on lockscreen
• Turn on screen on notification.
• Custom screen timeout after screen light up.
• Interact with the popup via slider or button based interface.
• For more details, please visit previous thread.
Features added new in v2
---------------------------------------------------------
• Screen will not light up in pocket.
• Screen will light up if taken out of pocket within 10 sec of notification arrival.
• Proximity sensor check duration customization.
• Double tap slider to expand/shrink notification (4.1+)
• Lot of codes improved from loop based to event based. More battery friendly.
• Haptic feedback on slider and improved rendering code.
• Notifications open much faster and smoother with slider interface.
--More features planned for future updates.
Download from Play Store
https://play.google.com/store/apps/details?id=com.anandbibek.notifyme
* Main screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* App's settings
* And an actual notification
The source code is also freely available under GPL license as original project https://github.com/anandbibek/notify_me
Due to my limited knowledge on github, I could not keep previous commits from TpmKranz's Eclipse based project while moving to gradle and Android Studio build structure. Hence I started a new repo with TpmKranz version as base.
Original Thread: http://forum.xda-developers.com/showthread.php?t=2707698
Changelog :
---------------------------------------------------------
v 2.1.2
• Fix display light up problems
• Improve proximity sensor recognition
• Fix crashes on successive notification
v 2.1.1
• Fix memory usage of over 60MB. Should be under 20MB now.
• Disable aggressive and in call popup settings. Caused problems if turned on.
• Filtered out permanent and ongoing notifications. Should be better with blacklist mode.
• Disable icons in app chooser (temporary fix for crashes)
If you get too much notification popups, don't use blacklist mode. Or chose the culprit app, turn off "show popup" & "light up" options under its individual setting.
v 2.1.0
• Improved settings page
• Option to show all notifications. Individual apps can be configured for blacklisting by turning off all options or for specific preferences different from default config.
v 2.0.2
• Fix crashing while notification popup.
v 2.0.1
• Allow disabling proximity sensor check.
v 2.0.0 (build 200)
• Screen will not light up in pocket.
• Screen will light up if taken out of pocket within 10 sec of notification arrival.
• Proximity sensor check duration customization.
• Double tap slider to expand/shrink notification (4.1+)
• Lot of codes improved from loop based to event based. More battery friendly.
• Haptic feedback on slider and improved rendering code.
• Notifications open much faster and smoother with slider interface.
--More features planned for future updates.
#Screenshots in first post are not from galaxy y its from the original thread but this app works fine on our device#
Related
. . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
. . . . (current version 1.0 FINAL)
More control. More battery. More comfort.
Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2.
Lumos focuses on minimal CPU usage, maximum battery saving, low memory footprint while maintaining maximum backlight change smoothness and responsiveness. Lumos combines the best from all available auto-backlight solutions and adds many extras for your tweaking needs
Features:
- simple and clean installation and uninstalation
- extremely low CPU usage when working, 0.05-0.3% on polling
- NO battery and CPU overhead (drainage) unless you actively use your device's display
- low memory profile considering all the options
- simple and reliable configuration GUI with easy step-by-step calibration process
- many options that let you change every aspect of how your backlight works
- program exceptions to set different backlight for any application
- relative excaptions allow you to amplify/attenuate the automatic backlight for specific applications
- ability to force display ALWAYS ON for certain application
- integrated tool to detect all active application names, leave it running in the background and it will log all application names you use
- configuration failsafe. No matter what you do, Lumos won't crash, just tell you what is wrong and use defaults.
- supports vast majority of HTC branded devices since HTC Diamond
- many supported languages
See this thread for details and news and download:
http://forum.xda-developers.com/showthread.php?t=450318
Enjoy the light
Final Version
Lumos version 1.0 FINAL
has been officially released.
Most notable new features:
- stability/performance fixes
- Relative Exceptions (see FAQ)
- exceptions that prevent device sleep
- support for simple command-line services (see FAQ)
- support for QVGA / HVGA displays
- fixed issues and detection of defective light sensors that never report 0
- automated handling of built-in auto backlight related issues (may require restart after installation to apply fix)
- some ability to identify missing HTC drivers and offer a solution
Please note you can freely update over RC2 version and keep most of your settings but you will lose all per-app exceptions due to compatibility problems.
Also note that some new features may appear in English as they are not yet translated. Fixed translations may be released in the future if there is demand.
Download the new version in first post.
FAQ is in second post and is being updated if you have any questions about the new features.
Thanks!
For me, Lumos the #1 app that helps me to save battery. I use this curve in my HTC Herman:
(the image was taken with my previous ROM, 6.5)
Unfortunately, when I try to configure the exeptions, I get an error and the program quits
(ROM energy last build WM6.5.x)
Best regards
insauser you should be proud to be the first to discover this bug.. even before I did (had to borrow a WM device as I have none with light sensor)
The crash only occured if you tried to add an exception with empty window name, I found no more bugs so I uploaded a fixed version just now. Basically I made it so that you can't use the ADD button before you fill a window/class name.
This seems like a frankly awesome application, but I have to ask, is there any possibility that it could be made to work with other drivers than HTC?
If you want to take that as your little personal project I am willing to share the source code and give maximum support. I have no (modern) WM device for testing as I dropped the flag and moved into the green robot world
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wear Tally Counter is a fully customizable tally counter for Wear OS 2.0+.
Features
• Double and single tally counter
• Ongoing counts
• Multiple theme colors
• Ongoing Tally watch complication
• Quick Tally Tile
• Ongoing Tally Tile
• Vibrate on increase/decrease count
• Auto saves count
• Increase/decrease count with watch bezel or rotary input
• Multiple icons to choose from for customizing your counter
• Standalone app so need to install on phone
Download
https://play.google.com/store/apps/details?id=com.h3r3t1c.prowearcounter
Code:
v2.0
* Fixed ongoing double tally not having space between numbers when no icon is used
* Fixed various layouts not displaying correctly on smaller screens
* Improved displaying list items of ongoing tallies with no title
* Quick tally tile theme color can be set
v1.3
* Clicking tally complication now vibrates watch
* Fixed reduce tally not vibrating
* Fixed reported crash
* Reduced download size
v1.2
* Fixed Tile and Complication not syncing if they are the same ongoing tally
* Vibrations now works on Tile
v1.1.1
* Fixed watch complication icon not showing
v1.1
* Added link to support thread
* Added option to keep screen on when using tally
* Improved picking tally for tile
v1.0
* Initial Release
Starting tomorrow February 27th this app will free to download for a whole week!
Store listing updated! App is available for download on all watches running wear os 2.0+
App updated. Should see the latest version in the play store soon.
Code:
v1.1.1
* Fixed watch complication icon not showing
App has been updated! Should be able to download the latest version soon.
Code:
v1.2
* Fixed Tile and Complication not syncing if they are the same ongoing tally
* Vibrations now works on Tile
App has been updated. Should be able to download update soon from the Play Store.
Code:
v1.3
* Clicking tally complication now vibrates watch
* Fixed reduce tally not vibrating
* Fixed reported crash
* Reduced download size
App has been updated. Should be able to download update soon from the Play Store.
Code:
v2.0
* Fixed ongoing double tally not having space between numbers when no icon is used
* Fixed various layouts not displaying correctly on smaller screens
* Improved displaying list items of ongoing tallies with no title
* Quick tally tile theme color can be set
You need a notification light / LED for your Galaxy S22 Plus? With aodNotify you can easily add a notification light / LED directly to Samsung's Always On Display!
You can select different notification light styles and show the notification light around the camera cutout, screen edges or even simulate an notification LED dot in the statusbar of your Galaxy S22 Plus! As the notification light is integrated in Samsung's Always On Display it has minimal battery consumption and doesn't drain your battery like other apps which keep your phone awake!
If you don't need the Always On Display, the app can also activate the Always On Display (AOD) only on notifications or show the notification light / LED even without the Always On Display!
With the notification preview feature you can directly see if you have important notifications without waking your Galaxy S22 Plus!
MAIN FEATURES:
• Notification light / LED for Galaxy S22 Plus, Note 20, S20...
• Low energy notification preview (android 10+)
• Activate Always On Display (AOD) only on notifications
• Charging / Low battery light / LED
MORE FEATURES:
• Notification light styles (around camera, screen, LED dot)
• Custom app / contact colors
• ECO animations to save battery
• Interval mode (on/off) to save battery
• Night times to save battery
• Minimal battery consumption
BATTERY USAGE PER HOUR ~:
• LED - 3.0%
• LED & INTERVAL - 1.5%
• LED & ECO - 1.5%
• LED & ECO & INTERVAL - 1.0%
• NOTIFICATION PREVIEW - 0.5%
• ALWAYS ON DISPLAY - 0.5%
If there is no notification the app consumes almost 0% battery
DOWNLOAD:
NOTES:
• Samsung may block this app with future updates!
• Please check if the app is compatible before updating phone software or always on display!
• Altough we never experienced any screen burn in issues on our test devices, we recommend to not keep the notification light / LED active for a long time! Use at you own responsibility!
"Samsung Galaxy" is a protected trademark of "SAMSUNG ELECTRONICS"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The app should work fine on S22. Will test asap when i get my S22!
Jawomo said:
The app should work fine on S22. Will test asap when i get my S22!
Click to expand...
Click to collapse
I use this app a lot on my OnePlus Nord and I think I'll do the same on the S22+
What do you think of some gradient coloring feature ? Like we can chose 2 colors for some animations
Jawomo said:
The app should work fine on S22. Will test asap when i get my S22!
Click to expand...
Click to collapse
Greetings, thank you for the app great work!. A couple of observations:
* The "Camera edge-Fine tuning" section needs further alignment, if u change the "Offset position of Y" to : -2 that should solve it.
* Regarding setting up the app you need to mention that the app needs " the battery optimization" option to be changed to "Unrestricted" in order for it to not be killed and stop working.
* If you restart the device, the app doesn't work properly because AOD is turned off and you will have to turn it on manually again. I hope that can be solved soon.
I use this on all my devices..never had an issue. So I am saying thanks once again
Hello @Jawomo
Which topic should I use to talk about Power button remapper for my S22+?
Edge lighting does not work on the S22 plus.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Descendant is a customised Android ROM that focuses on enhancing UX and UI
over stock Android along useful features.
Downloads
Head to the download page.
Sources
Github
Same as any Treble ROM.
Do the necessary wipes preferably via stock recovery and flash the system image via fastboot or recovery (where possible).
No wipes are needed between updates from Descendant itself, unless specified.
Listing all the additions would be a huge wall of text, that you wouldn't even read.
So, head over the Telegram group or the website and feel free to lurk.
Preloaded applications
Google Apps are included.
Having a bug or not booting for whatever reason?
Look for "How to report bugs" on this post.
Bug reports without logs will be ignored.
@phhusson | @Letzen | @krule031 | @ezio84 | @linuxct
Everything runs good
It has ota updates?
Hi! Just only vanilla releases?
How to activate superuser!
selo28 said:
How to activate superuser!
Click to expand...
Click to collapse
you need su installed via recovery
rcavalcanti said:
Hi! Just only vanilla releases?
Click to expand...
Click to collapse
all releases have gapps included (look at the size). the file names are wrong. joing telegram group confirm what i say
Hi, I tried to install vndk lite, and got an error that the file is too big.
system.img?
Yes, I tried both files
Descendant_treble_arm64_bvS_vndklite-12.1-20220410-1926-RELEASE
Descendant_treble_arm64_bvS-12.1-20220410-1926-RELEASE
I tried to download the arm64 file, but an error appears that my speed is less than 1mbps, but my internet is 500 mbps. Also that I'm trying to cheat the download system and I can't download the rom.
diogocorotee said:
I tried to download the arm64 file, but an error appears that my speed is less than 1mbps, but my internet is 500 mbps. Also that I'm trying to cheat the download system and I can't download the rom.
Click to expand...
Click to collapse
Same issue. Can't help the Download speed unless you pay their patron. A VPN might improve the connection a little.
For the cheat thing, try to disable the any kind of adblock plugin, include 'clearURL'.
May update is rolling out.
Bug Fixes:
Solved an issue with quick unlock;
Solved an issue with lockscreen pin layout scramble;
Solved an issue with Ambient Light that wasn't correctly showing the style selection icon when in Light Theme;
Solved a graphical issue that was showing an arrow across Google dashboard tab in Settings;
Solved an issue with Airplane Mode that was preventing QS header to be correctly displayed;
Solved an issue that was preventing Notification Chips to correctly work;
Solved an issue that was preventing Status bar tuner to correctly hide volume icon;
Solved an issue with SafetyNet.
Fixed an issue that was preventing vndklite images to be remountable in RW
Improvements:
Improved weather icon transition between Always On Display/Ambient Mode to lockscreen;
Improved alarm widget positioning over lockscreen;
Improved user interface for clock theme selection which will now show real previews;
Improved user interface for Ambient Lights which will now show real previews;
Improved double tap to wake/sleep transition animation when in Always On Display.
Sorted all gesture related activity under Settings -> Gestures
Added full translation for Telugu language
New Features:
Added all available options to be assigned on both lockscreen buttons;
Added the ability to center clocks on lockscreen;
Added "Pulse to Wake" option for double tap to wake gesture under Settings -> Gestures;
Added Data Tile to quickly switch SIM data;
Added Caffeine Tile to keep the device awake;
Added Visual Feedback in Settings -> Accessibility, which allows visual feedback via flashlight blinking for notifications or calls
Added privacy dots option to be shown only for user app (whitelisting system) under Settings -> Privacy
Interface changes:
Lock/unlock Icon on lockscreen has been moved on top (except when an UDFP is enrolled)
Security patches level
May 2022
Updated to latest phh sources
Downloads at downloads.descendant.me
i can't get the latest download link ,Is there any other ways except the Official website?
This ROM is amazing, best PE on Xiaomi 11
This ROM is very stable and useful on my tablet.
However, the lock screen can't landscape orientation, so that is the only weak point.
I hope this will be improved in the next update.
Can you use Magisk with this? Superuser isn't really able to do much anymore without Magisk granting and Lsposed..
Descendant 12.1 June update is rolling out.
Bug Fixes:
Solved an issue with Weather tint on lockscreen
Solved an issue that was preventing some clock to be correctly updated on pulse and AOD events
Solved an issue that was preventing Heads-up to work after disabling Notification Chip
Solved an issue that was preventing Weather icon to be correctly resized according to the user selected display size
Solved an issue that was preventing pulse events to be correctly dismissed
Solved an issue that was causing crashes when "Privacy dots only for system apps" was enabled
Improvements:
Enhanced coherence in Gestures Magic text styles
New Features:
Added Weather widget;
Added Continuity Clock widget, a widget that will mirror lockscreen's clock style to offer seamless transitions from lockscreen to home screen;
Added Lockscreen Events (daily events from calendar), an extra line under date on lockscreen that will show upcoming events
Added a new clock style: Sony Aligned;
Added Descendant Sounds (with dynamic notification sounds) under Settings -> Sounds and Notification
Security patches level
June 2022
Downloads at downloads.descendant.me
When will the next version be uploaded?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
*Flashing Custom Roms or Custom Recovery will tripped knox
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
*/
Improvements over PixelExperience
Performance improvements from ProtonAOSP
Reduced log spam verbosity
Separate QS tiles for WiFi and Mobile data
Monet bootanimation
Aggressive Idle mode
Allow toggling screen off FOD for supported devices
Allow option to disable screenshot shutter sound
Switch for linked ring and media notification volumes
Allow to disable battery estimates in QS
Allow disabling unlocking ripple animation
Apply monet to fingerprint authentication ripple animation
Bluetooth battery icon in status bar
Status bar tuner and Full screen Display
In-call vibration customizations
Navbar layout inversion in 3 button gesture style
Android 12 style 4G/LTE icons
Add/remove QS with one click
Increased UI responsiveness
Optimized Night Light
Per app network restrictions
Annoying notifications
Three-fingers-swipe to screenshot
Allow to disable privacy indicators
Doubletap/longpress power to toggle torch
Double tap to sleep on lockscreen
Double tap to sleep on statusbar
Volume key music control
Themed icons for a lot of 3rd party apps
Extended Monet to more UI elements
Simple RGB color balance transform sliders
More font size in 5% steps from 80% to 130%
First-class implementation of Repainter app
A lot of optional Quick Setting tiles
Caffeine
Heads up
Sync
Adaptive Brightness
Ambient display
Always on display
USB tether
Live display
Under the hood optimizations
Device Specific Issues:
• Ui Rendering is using SkiaVK Probably will cause some issues
• VoLTE, VoWIFI, Samsung Proprietary Apps will never work.
• Encryption
Downloads
Download PixelOS Download
Magisk (Optional) Download
Note: GApps are included, don't flash separately.
Notes
• Encryption Builds Will Builded With Request
• SElinux is Enforcing
PixelOS Recovery is recommended if you want to stay encrypted, no custom recovery supports encryption on Android12, i.e. you won't be able to decrypt your data.
Join Our Telegram Group : Join Now
Join Exynos 9810 Group : Join Now
Buy Me Some Latte : Donate
Source Code
PixelOS Source : http://github.com/PixelOS-Pixelish
Device Tree and Vendor Tree : https://github.com/universal9810
Kernel Source Code here
ROM OS Version: Android 12.1
ROM Kernel: Linux 4.9.312
Stable Release Date: 15/05/2022
Latest Release Date: 15/05/2022
Reserved
Some screenshots would be nice!
Bluetooth call not work!
Hey! wearable does not work, writes that the phone was unauthorized changed, android auto does not work yet. I would be grateful if you could help me solve this problem. It's just the best and most optimized firmware I've seen since I bought the phone.
Thread closed at OP's request.