Hello... I break my device after playing with a rom and now the odin can't find my ace-i .. I have windows 8.1 and odin 3.7 .
I try to uninstall odin kies and samsung drivers and install it agen . I try use other cable and ... nothing . My device stop in kernel logo. Plizzzz help my
manos_mand said:
Hello... I break my device after playing with a rom and now the odin can't find my ace-i .. I have windows 8.1 and odin 3.7 .
I try to uninstall odin kies and samsung drivers and install it agen . I try use other cable and ... nothing . My device stop in kernel logo. Plizzzz help my
Click to expand...
Click to collapse
If any of your friend or relatives has a Windows XP or Windows 7, try doing this in that machine. It works well on XP.
Why not with win 8.1 .? It write "use device not recognised"..
There are something rom orr anyrhing to install from cwm to save my device.? Anything withnot odin??
manos_mand said:
Why not with win 8.1 .? It write "use device not recognised"..
There are something rom orr anyrhing to install from cwm to save my device.? Anything withnot odin??
Click to expand...
Click to collapse
Odin usually never works well with Windows 8 or 8.1. Well you can always install another custom rom for your device as long as you can access the CWM Recovery Mode. Odin is only used to flash back your Stock rom. Make sure the rom is for your device and not for another device as it could hard-brick your phone. Hope I Helped
are you using the Latest Version of Odin ?? .. if so, i encountered the same problem with my Ace-i under Windows 8.1 .. i recommend using Odin3 v1.84 .. i attached it below so you don't have to search it.
Download Stock ROM [i already provided Odin for you, so go out there and search it ]
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
Related
need help to unrrot and install original software to my galaxy pocket s5300
i dont have backup to my original software
can any one help me ?
any help plzzzzzz
TRY USING ODIN AND FLASH ORIGINAL ROM
I had face with bootloop and i used ODIN to flash original rom and i needed to root again
I'm not sure about this ,so you pls ask more information with senior members
plz reply
thanks
Same issue.!
70usmus said:
need help to unrrot and install original software to my galaxy pocket s5300
i dont have backup to my original software
can any one help me ?
Click to expand...
Click to collapse
PLS ANYONE HELP i cant even use ODIN because my USB driver is not working even i download any software's for the drivers.
boohyucks said:
PLS ANYONE HELP i cant even use ODIN because my USB driver is not working even i download any software's for the drivers.
Click to expand...
Click to collapse
Drivers: Samsung Drivers
Download firmware: tsar3000 or Samsung
Download Odin: 4shared
Preparation:
Download all the above mentioned tools then extract and install USB drivers and reboot your PC, After that extract Odin and Firmware package to known place on your PC to use it in the following steps.
How to flash:
- Run Odin Flasher and check only these options: Re.Partition, Auto Reboot, F.Reset Time.
- Click PDA button and select PDA_S5300xxxxx_REV04.tar.md5
- Click PHONE button and select MODEM_S5300xxxxx_REV04.tar.md5
- Click CSC button and select GT-S5300-MULTI-CSC-Oxxxxx.tar.md5
- Put the phone into Download Mode: Volume Down + Home + Power.
- Connect the phone to your PC using the Original USB cable.
- Check that Odin flasher detects your phone's Com port number then continue to next step.
- Click Start button and watch Odin program during the update process, But do not interrupt it.
- The phone will be rebooted by Odin after all is done, Now you can disconnect it from PC.
- After your phone is fully on it is better to do Full reset by this code: *2767*3855#.
- Wait the phone to restart and then you can set it up the way you like.
hi guys!
i have a problem ...
my friend has the GT 5830c, I installed a custom ROM and it worked perfectly!
But after 5 days of use. the phone crashed and restarting it did not load the system and is in the samsung logo screen!
go for recovery and follow the standard process to reinstall the OS. after reinstalled the system, it gave the same problem! to restart it gets stuck at the boot screen!
Another is that I can only access the download mode. after this try mode recovery, this mode recovery does not enable more!
I tried to flash the stock rom, but the system windows 7 does not recognize the device! already tested on four different PCs and it is not recognized!
already reinstalled windows driver several times and does not work. the computer does not even detect that something was connected to the same!
anyone have a light?
excuse my bad english!
thanks
First of all it is on wrong section.
Definitely, I can't understand your english.
All what I understand from this post is :
1) You installed a Custom ROM on your friend's GT-S5830C device.
2) It worked good until the phone "crashed" and it stuck on bootlogo.
3) After this , you went to CWM Recovery and flash a new Custom ROM again ( You deleted data , cache and dalvik cache ? ). If you install a Custom ROM on your current ROM of course there are high chances of bricking device.
4) So , now it stucked on the bootlogo and it didn't go even of CWM Recovery, right ?
5) Now , you could only access download mode. Sure you would do because the device was bricked.
6) You tried to flash stock ROM.
- Now : What version of ODIN you used ? What PDA , CSC , MODEM , or even pit you put on the ODIN Brackets ? Where did you download , or what TUT you followed to flash Stock ROM ?
- What drivers you installed on PC ( all of them ) ?
- You tried all Computer's USB Porters ?
Answer this questions and let me know what specified problem is it.
Regards,
Sniper Killer
If you are in download mode (not recovery) and different pc's don't recognize the device than probably you have a defected usb cable. Try another cable.
Download mode: Vol up + Vol down + Power.
If recognized as an Unknown device than in device manager remove the device, remove drivers, reboot pc, reinstall drivers, reboot and try plugin device in download mode.
:: Today is the first day of what's left of your life. ::
thanks !!
Sniper Killer said:
First of all it is on wrong section.
Definitely, I can't understand your english.
All what I understand from this post is :
1) You installed a Custom ROM on your friend's GT-S5830C device.
2) It worked good until the phone "crashed" and it stuck on bootlogo.
3) After this , you went to CWM Recovery and flash a new Custom ROM again ( You deleted data , cache and dalvik cache ? ). If you install a Custom ROM on your current ROM of course there are high chances of bricking device.
4) So , now it stucked on the bootlogo and it didn't go even of CWM Recovery, right ?
5) Now , you could only access download mode. Sure you would do because the device was bricked.
6) You tried to flash stock ROM.
- Now : What version of ODIN you used ? What PDA , CSC , MODEM , or even pit you put on the ODIN Brackets ? Where did you download , or what TUT you followed to flash Stock ROM ?
- What drivers you installed on PC ( all of them ) ?
- You tried all Computer's USB Porters ?
Answer this questions and let me know what specified problem is it.
Regards,
Sniper Killer
Click to expand...
Click to collapse
hi guys !
I followed this topic that I created myself when I still had a ACE 5830M !
http://www.androidpt.com/index.php?...ck-rom-galaxy-ace-s5830i-c-e-m-via-odin-root/
it always worked! But this device is not mine, more's the same model!
dont worry guy !
tested on another computer and it worked, i already used much this ACE 5830 before. coincided at 4 micros do not recognize the phone, but the fifth computer tested and recognized!
the custom ROM that gave the problem is exactly a one you are using!
thanks for the help!
admins can lock the topic!
ChelebiTech said:
If you are in download mode (not recovery) and different pc's don't recognize the device than probably you have a defected usb cable. Try another cable.
Download mode: Vol up + Vol down + Power.
If recognized as an Unknown device than in device manager remove the device, remove drivers, reboot pc, reinstall drivers, reboot and try plugin device in download mode.
:: Today is the first day of what's left of your life. ::
Click to expand...
Click to collapse
Thank you friend, have solved the case!
i have s duos s7562 phone....rooted...the problem is im stuck on boot animation....
i already reset my phone but nothing happen im still in bootanimation...
last thing i remember is i change the 'LCD density' in ROM toolbox lite..hehehe ...and when i reboot it...stuck on bootanimation...
im planing to repair it to samsung tech but i want to know if someone know the solution..
thnks.
NHOman14 said:
i have s duos s7562 phone....rooted...the problem is im stuck on boot animation....
i already reset my phone but nothing happen im still in bootanimation...
last thing i remember is i change the 'LCD density' in ROM toolbox lite..hehehe ...and when i reboot it...stuck on bootanimation...
im planing to repair it to samsung tech but i want to know if someone know the solution..
thnks.
Click to expand...
Click to collapse
You can flash the original firmware using odin search in xda or google
thnks but how??
sangalaxy said:
You can flash the original firmware using odin search in xda or google
Click to expand...
Click to collapse
can you tell me the exact ways to do that...
thnks.
NHOman14 said:
can you tell me the exact ways to do that...
thnks.
Click to expand...
Click to collapse
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
nice!...
sangalaxy said:
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
Click to expand...
Click to collapse
gonna try it...thnks a lot!!!...
not flashing recovery...
sangalaxy said:
download your firmware from Samsung-updates.com or sammobiles.com
download kies or Samsung mobil drivers and install close kies after install(confirm)
download odin and start it place the pda modem csc files according to your firmware if it is a single file place it in pda
switch off your phone then press vol down+hom+power button you will get a screen press vol up for downloading connect it to pc
odin will show the com port connected no start it will finish in 3 min
phone will restart now it is good that you wipe data and cache from recovery mod
also without flashing you can try aroma fm and try to edit the build.prop
check arom fm here http://forum.xda-developers.com/showthread.php?t=1646108
install it in cwm go to system and edit build.prop you will find a line with lcd density there change it to your correct density that will do
Click to expand...
Click to collapse
hi sir...is there video in doing that??..bcause i dont know what file should i use...
and another problem is: i cannot flash my recovery... so i cant do the two ways you give...
NHOman14 said:
hi sir...is there video in doing that??..bcause i dont know what file should i use...
and another problem is: i cannot flash my recovery... so i cant do the two ways you give...
Click to expand...
Click to collapse
-first download stock rom as per your region from here http://samsung-updates.com/device/?id=GT-S7562
-then download odin from here http://www.mediafire.com/?p83ya3h8smy19m6
-start odin place the stock rom on pda of odin (if it is single file)
-switch off your phone
-press voldown+home+power button to enter to download mode
-then press vol up to go to download
-connect your mobile to pc odin will show the port connected
-press start wait for finish and a pass in odin
P.S you need to install Samsung drivers inorder to recognize your device or simply install kies
- close kies before starting odin else it will not work properly
thnks
thnks your sir for helping me...i appreciate your help to me...
thnks.
gonna try it...
what if ?..
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
hi
sangalaxy said:
-first download stock rom as per your region from here http://samsung-updates.com/device/?id=GT-S7562
-then download odin from here http://www.mediafire.com/?p83ya3h8smy19m6
-start odin place the stock rom on pda of odin (if it is single file)
-switch off your phone
-press voldown+home+power button to enter to download mode
-then press vol up to go to download
-connect your mobile to pc odin will show the port connected
-press start wait for finish and a pass in odin
P.S you need to install Samsung drivers inorder to recognize your device or simply install kies
- close kies before starting odin else it will not work properly
Click to expand...
Click to collapse
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
NHOman14 said:
sir..what if i use the file:
Samsung-Updates.com-KERNEL-GT-S7562-XTE-S7562XXBMD2-1365752402.tar
can i use the same procedure you gave to me??
thnks.
Click to expand...
Click to collapse
yes you can use the same procedure place it in pda
Hi i have a s2 with 4.0.4 vk rom ( ics, custom ) i have installed kies and kies have installed all drivers, and i try it i take the usb and my pc see the phone and i have acces to my phone's files no problem with drivers,
i came to download mode ( because i use odin for update my rom ) but my pc say in download mode unknow device
shorty ; my pc see my phone in normal mode , but dont see in download mode hereby i cant flashing .tar files with odin because odin and computer doesnt see the device and say unknow device,
yes i am sure i have all drivers installed
a queston ; have download mode a different drivers? if yes pls give link
i hope you understand me, sorry for my bad english
Try to remove and wait for the automatic installation of the drivers from Windows Update (if you're using Windows Vista /7/8 ).
-Marco said:
Try to remove and wait for the automatic installation of the drivers from Windows Update (if you're using Windows Vista /7/8 ).
Click to expand...
Click to collapse
İ use xp i have try it in win 7 in win 8 in vista (( not work
I do not know, then. Odin recognizes almost ALWAYS devices
Try exiting kies before starting Odin and then plug the S2 it should recognize it by then
Sent from my GT-I9100 using xda app-developers app
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
manos_mand said:
Hello.
I cand find my s5830i in odin. I use the cable in download mobe but my pc have a messege to write . "Usb device not recognised" why my pc cant find my ace? I istall and unintsall kies smasung drivers and odin many, many times and I do all thins in win 7 ,8.1 and xp . I use for all this 2 computers. I have use odin again and I have not any problems before. Can anybody help me?
Click to expand...
Click to collapse
It's usually the drivers. Please reinstall them again and try to see if your device can recognize it. Also make sure the usb cable is a working one. Do post the results. Hope I Helped
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
xlSKYFiRElx said:
download latest samsung usb drivers, just search for it in google, in case you are using the latest version of Odin, i attached Odin3 v1.84 i've been using with my Ace-i since the latest version of Odin doesn't recognize my phone [silly really]
Just download a Stock ROM if you're device is bricked and do as follows
1. Run as Admin
2. locate .pit file [included in .zip file]
3. set proper files
MODEM = PHONE
CSC = CSC
PDA = PDA
4. Boot Ace-i to Odin / Download Mode [Vol Up + Vol Down + Power]
5. Press Volume Up
6. Flash
7. Wait patiently [it took seconds for me to flash Stock ROM]
8. Reboot Device
now you're good
Hit Thanks if i helped
Click to expand...
Click to collapse
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Are you sure you have the latest drivers?
mahithm said:
Are you sure you have the latest drivers?
Click to expand...
Click to collapse
For odin yes.
For samsung drivers not.
Can you give me a link.
manos_mand said:
For odin yes.
For samsung drivers not.
Can you give me a link.
Click to expand...
Click to collapse
You can download all the drivers from the useful guide by @brijeshep. Head to the "How to install Stock Firmware?" part of the guide to access all the necessary parts of the download. Here is the link,
Know your Device:Galaxy Ace GT-S5830i ~Root~Odin~CWM~ROM LIST
Do post the result. Hope I Helped
manos_mand said:
I have use odin again. I have experience with that. LoL
*I have allready test it with 3a cables
Click to expand...
Click to collapse
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Sk.vignesh said:
Here's the www.4shared.com/rar/YEW-Bh1S/Samsung_Galaxy_Ace_GT-5830_USB.htm?locale=en
Press Thanks If I Helped...
Click to expand...
Click to collapse
Thenx a lot ..
But if all this not work? What I can do?
manos_mand said:
Thenx a lot ..
But if all this not work? What I can do?
Click to expand...
Click to collapse
So did it work?
mahithm said:
So did it work?
Click to expand...
Click to collapse
No work
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Sk.vignesh said:
hi first uninstall kies and
try Samsung drivers package and then restart the pc ..
now download different version of odin and try ..it Will recognised ...
if error persists explain the type of error showing on the display ...
Click to expand...
Click to collapse
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Sadly you can't install stock rom from recovery
manos_mand said:
the error is "usb device not recognised"
i have install and uninstall many times kies and drivers.
Can i install stock rom from CWM or stock recovery?
anything other of odin?
Click to expand...
Click to collapse
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Hitesh2626 said:
Why to install many times kies, doesn't required
As i see that your device is not recognised by the drivers ,
So now download PDA net drivers (search it on google )
After downloading and installing
Just connect your device to your PC and wait for a min to detect ( you ll get to see in Task Bar right corner icon)
Then Open Odin and try the rest.
Click to expand...
Click to collapse
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
manos_mand said:
new messege for me from PdaNet
error...
"Please make sure your phone is attached to the computer and usb debugging is enabled on the phone"
I am sure ...
Click to expand...
Click to collapse
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i format my coputer and then i brick my device!
before fomat it work fine.... then not
i mast uninstall kien?
i mast have install only pda net and samsung drivers install?
Hitesh2626 said:
Before getting brick , your usb socket was working fine ?
Your PC was detecting your device ?
Better to give your device to service center .
Click to expand...
Click to collapse
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
manos_mand said:
i have somthing now!!!
i flash a kernel nad i can get in the fierst mobile rom.
but i can flash anything other. i i flash other rom it stop at samsung logo!
if i flash again this kernel i get in this fierts rom!
nothing new from debugging
Click to expand...
Click to collapse
Ok so you now your on Stock Rom , so just now get into recovery > flash CWM > and take Backup
Then reboot your phone, after again get into recovery mod (e3 red one ) and do wipe data/cache then Reboot your device , After doing all , then flash custom Rom which ever you wanted.