Hello, i have wrong fone Zte Blade Q ...I thought that it was sufficient to restore android .. but probably not .. PROBLEM:
Phone is switched on the ZTE logo,, followed by Android logo which lists Formatting / cache ... and here are stopped entire course, still loading but nothing happens and the phone will not turn off the key, I have to remove the battery ... Please experienced advice or someone who has had this problem and also how to solve the following .. THANK YOU! ..and I am from Slovakia, sorry for the translation.
kukoss said:
Hello, i have wrong fone Zte Blade Q ...I thought that it was sufficient to restore android .. but probably not .. PROBLEM:
Phone is switched on the ZTE logo,, followed by Android logo which lists Formatting / cache ... and here are stopped entire course, still loading but nothing happens and the phone will not turn off the key, I have to remove the battery ... Please experienced advice or someone who has had this problem and also how to solve the following .. THANK YOU! ..and I am from Slovakia, sorry for the translation.
Click to expand...
Click to collapse
Go here http://www.ztedevices.com/search.html?keyword=blade q and find the right carrier or region your phone is from and there are downloads and instructions on how to load the original software back to it.
reply
I tried it first as directed,,, there is the option to 1. install update / restore from SD card-which is not me at all because I did not even get to the desktop, 2. or via the android system recovery, also from sd card .... but can not seem to get into recovery through a combination of volume up + power, because there is always android logo appears, and below this written Formatting / cache .. still there fetching but nothing happens ... I guess it detonated the cache? I add video here as the phone message when certain manipulations
video
kukoss said:
I tried it first as directed,,, there is the option to 1. install update / restore from SD card-which is not me at all because I did not even get to the desktop, 2. or via the android system recovery, also from sd card .... but can not seem to get into recovery through a combination of volume up + power, because there is always android logo appears, and below this written Formatting / cache .. still there fetching but nothing happens ... I guess it detonated the cache? I add video here as the phone message when certain manipulations
Click to expand...
Click to collapse
i post video on youtube - ZTE Blade Q /wrong HW or SW ? , pls this write to search youtube ,,my nick on youtube Marek Gofald
Related
Hello XDA!
I have searched for hours, on english, russian, chinese and all kinds of websites for the stock firmware of the Tianji x720d.
The problem is, my mom used this phone for a while but she got another one and let me have it. I used "factory reset" and also wiped the SD card. It went into recovery and you can see the bar filling for 2-3 seconds with the android on the background, then it reboots and goes into a loop. ( Reboot > Android "wiping" mode for 2-3 sec > Reboot > and so on.. )
I've tried countless things but i can't get it into the normal rom anymore. only into the stock recovery. what should i do?
bump?
Same problem for me
xheroxkefx said:
Hello XDA!
I have searched for hours, on english, russian, chinese and all kinds of websites for the stock firmware of the Tianji x720d.
The problem is, my mom used this phone for a while but she got another one and let me have it. I used "factory reset" and also wiped the SD card. It went into recovery and you can see the bar filling for 2-3 seconds with the android on the background, then it reboots and goes into a loop. ( Reboot > Android "wiping" mode for 2-3 sec > Reboot > and so on.. )
I've tried countless things but i can't get it into the normal rom anymore. only into the stock recovery. what should i do?
Click to expand...
Click to collapse
Hi: i'm looking for a stock firmware Haipai x720d, please, if someone has it, share link. THX!!
Hello ,
I have a Polaroid on the back of the tablet is marked with the following model: MIDC407PR012.133
The tablet does not start school, when I turn it on is the background image with the logo and Polaroids remains locked so .
I tried to do everything possible to zero even those from the recovery mode reset wipe data / factory and wipe cache partition , but I have not gotten results.
I suppose now that the system is corrupt and so I wanted to reinstall the rom .
I found this site ...southerntelecom.com/ polaroidsupport / updates.html that offers a variety but none matches the pattern that I ...
I still wanted to try to install a new firmware but I can not because the tablet pc does not recognize me and I've tried all the driver updates ... I think it is due to blockage of the tablet.
I would like to ask a favor to those who have a table like mine, since the last road is to install a ROM via microSD ... there is someone that I would make a backup of your system (no DATA ) so I can try Via The recovery in the install everything from micro SD card with the procedure of restoring a backup ?
Even if you have a different model ..... before throwing it since I can not use it I would try with a backup from models MIDC407 ... thanks
I hope there is someone who can give me directions .
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
not bricked
alihassan1397 said:
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
Click to expand...
Click to collapse
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
amr elfiky said:
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
Click to expand...
Click to collapse
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
kasmotsadamori said:
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
Click to expand...
Click to collapse
what do you mean it says no command. ? can you please elaborate ?
Same problem to me, need help
http://ainotech.com/how-to-flash-lenovo-a5000-receive-root-custom-recovery/
It worked for me now my phone is working better then it was before , I think it will work for you too,
Before few weeks I was flashing a rom using TWRP recovery in my nokia x2 . But, mistakelly I flashed an unwanted zip (dynamic status bar for Nokia x2). After that , my mobile is not getting POWER ONN . i.e. when I press and hold power button , NOKIA name comes on screen as usual . But mobile was not switched on . I waited for about half hour ,but no success.
Then, I tried to flash my previously used rom again, but when I try to do that TWRP shows 'no md5 file found' then it stucked and restarts TWRP . I tried it many time , but happens again and again.
My brain was not working , so I wiped everything i.e. Delvik Cache,Data,Internal Storage,Cache,System and SD Card too. But problems remain unchanged.
Now TWRP shows no OS installed.
Please help me. It is very important for me. I will be very thankfull and helpfull to you.
Note: Please try to understand my mistake full language
Hey! So I just decided to try and get rid of that pesky encryption on the /data partition by doing a standard factory wipe in TWRP.
After a reboot the phone is now stuck on encryption in progress with the error:
Code:
Warning : Current version is not avaiable for user. Can't find matched cust for NT-code mcc/mnc[FFFFFF],subset[11]
I've checked in a couple of threads including This one but when I try to reboot into recovery it doesn't work. I've tried holding power and volume down when the phone is powered off but it just keeps rebooting to the encrypting screen.
I had Magisk-v6 and xposed installed on the phone before doing a factory wipe if that would affect.
Thanks in advance!
This happened to me, burn it
http://downloads.codefi.re/autoprime/LG/LG_G5/H850/H85010E/LG-H85010E-Flashable.COMPLETE.zip
But how am I supposed to do that?
Do I use external software or do I need TWRP for it?
Nevermind, I fixed it!
It appeared my main problem was getting into TWRP, now that I managed to get into TWRP the guide I provided in the main post worked like a charm!
Thanks either way for the answer.
How can i solve the problem. I have flashed a firmware and now the phone stats, but it will display ENCRYPTION and a button for restart phone. flashing no-verity-opt-encrypt.zip v 2.1 will not help. PLEAS help me !!
did you find the solution Losti2000? I am having the same problem My phone is an LG G5 tmobile H830.
Losti2000 said:
How can i solve the problem. I have flashed a firmware and now the phone stats, but it will display ENCRYPTION and a button for restart phone. flashing no-verity-opt-encrypt.zip v 2.1 will not help. PLEAS help me !!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=69986363&postcount=41