Hi all!
I have been given a Sumvision Cyclone Voyager-BT, I belive it is 10".
When I try to boot it up, it gets to the "ANDROID" splash screen, and just sits there till the battery goes flat!
I have tried everything to get into its Recovery mode, but nothing seems to work at all!
I have tried powering it on with various volume buttons held, and also holding Vol+ when sticking power cable in, but when I do that, all I get is an image of an android on its back with its stomach open with a red ! above it...
Can anyone help?
I just want to give it a full reset back to factory settings! haha
Cheers
Keith
try putting the password in to decrypt it
Related
Hello everyone.
Searching the forum I couldn't find a similar problem
I have installed the Rom Manager, and installed the CWM recovery Rom manager that is required. When I clicked the Backup Current ROM, that's when my problems started. Tablet reboots, turned on the screen as if it will boot and then shuts down. From that moment have I never managed to get further than the black screen.
I tried to connect tablet to the computer and enter the APX (press and hold, vol- and power button, or vol+ and power button or press and hold BACK and power button), but the computer does not recognize tablet at all. No birds, just nothing, screen just power up, and than shut down...
I even tried opening the tablet and removing the connector from the battery, but that didn't work too...
Has anyone had similar experiences and if anyone has an idea how to fix it?
Hi. I did http://forum.xda-developers.com/showthread.php?t=1586570 this to my phone and since then every time I turn it on the black screen with AP Fastboot flash failure appears and not the Motorola logo. Not that I turn off my phone that often, but it's frustrating. I have to pres Vol Up/Down + Power button and choose Normal boot everytime I want to turn on the phone. Please explain me how to unroot or I don't know, I have the phone for 5 days now. I want it to look like I've just opened the box
P.S. Already tried Factory reset, doesn't help, still the black screen when I press the power button to turn on.
P.S.2 My system version is 651.167.3370.XT910.AmericaMovil.en.01 if it matters.
Really? The link I posted is from this forum. Come on. I should be able to undo this flash I've made and really return to fabric settings.
Hi everyone.
I have Explay Surfer 8.02 Tab bought from russia. I don't really know what happened it just turned off itself and wont boot it stuck at the android logo, thats it. I tried pressing the little reset button at the back with paper clip. I also tried to go into recovery mode with holding vol+ and power button, but it only shows the little green dude without any menu. So basicaly i can't start it, i can't go into recovery mode. Suggestions ?
My brother fergot his password and therefore I need to factory reset the device using the recovery.
However, Volume up+ Power doesnt work for me, screen just goes black for a few seconds and it boots normally.
Anyone facing this issue too?
I have the Platinum 55d but...
I had trouble getting into recovery mode myself and this might help you.
Press and hold the power button and shortly thereafter press and hold the volume up button. Wait for the brand to load up and let go of the power button.
Wait for the android to show up. If it doesn't and the phone starts up normally, take out the battery and try again.
Once the android shows up hold the power button and tap the volume up button.
Same problem
I have the same problem
i start phone and try every way to get into recovery but cant get it on
did you find a fix?
me too! pls help!!
Thinking you can flash it with Sp-flashtool or http://www.mediafire.com/file/cgy6j622oq4lv7n/FACTORYDOWNLOAD_R2.9.9015.zip + driver
Offical firmware link etc. https://forum.xda-developers.com/android/help/archos-50c-platinum-archos-50cpl-twrp-2-t3594137
Btw sometimes it hard to boot into recovery so i use xposed to do that.
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset