Related
My Galaxy S3 connects to my car's Bluetooth and allows me to make and receive calls. However, notification sounds are not playing via Bluetooth. It seems that the phone is sending the sounds to bluetooth but the car system doesn't play them. The result is that I have no audible indication when I receive a message when my phone is connected to my car's Bluetooth system.
Similarly, if I try to use S-Voice it would seem that the phone is expecting sound input via bluetooth and not from the phone's built in microphone, which means it does not detect any sound. Audio output also does not play on the phone or via bluetooth.
Presumably my car's bluetooth does not support receiving such sounds - only supporting basic phone functions. I cannot find any configuration settings on the car system to enable it.
Is there any way of stopping my phone trying to send notification sounds to bluetooth and to just play these via the phone's speaker but still allowing the phone to be connected to bluetooth for making and receiving calls? Similarly can I force S-Voice to use the phone's microphone and speaker if it cannot be made to work with my car's bluetooth?
S Voice on AT&T Galaxy Note Bluetooth In Car
First off, I am having the same issue, I tried even holding down talk / voice command button on steering wheel, No luck. I have a 2012 Kia Optima GLI full Nav and Voice command options. I have my Note working nicely with Team Perfection ICS R2, S Voice is fully functional except:
When using S voice in car connected to car Bluetooth (pushing search button on bottom of phone face) it tries to accept audio input from car Mic over Bluetooth, but never receives input. Can't find any setting in S voice app to change input setting from car to phone mic. Not sure why the car mic doesn't work other than just not supported by the s voice app? Anyone out there know of a fix or work around?
s voice does not work over any bluetooth
I have tried this on multiple Bluetooth devices. It does't hear anything and it responds with a very feint. Robotic distorted voice. Music plays well on Bluetooth but I have had problems with phone calls.so maybe the problem is the Bluetooth stack rather than s-voice.
I am having the same problem with SGS3. When I was testing s-voice on SGS2 you could set s-voice to use SGS speaker and mic for voice commands and notifications. Now I can't find that toggle.
BT Devices , yes....Car BT, No
It works fine on my headsets. IT doesn't work in my car.
spanout has nailed the problem. It apparently does NOT use the mic in the phone when hooked to BT. The car is not designed to pass voice to the BT. The car BTs typically have their own voice control, and as such is handling the voice itself.
When you think about it, it makes sense. Less chance for outside noise if it takes the input from the mic on your BT device, as likely the phone will not be close to your mouth.
The only way we'll get it to work is to find a way to enable the mic on the phone when on BT. Probably would need help from the DEVs here on that.
im in the same boat!
the real kicker is SIRI can send her voice over the car speakers and utilize the car mic.
so logic says, its purely a BT setting on the software ice cream and s3.
any apps for that? or any dev's want to chime in?
im using a very simple bmw bluetooth (not idrive).
it cant stream music, so i dont know how the fak siri can send her voice over it.
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
georgedeaves said:
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
Click to expand...
Click to collapse
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Yakumo.unr said:
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Click to expand...
Click to collapse
so switching the s-voice and nav to MONO works with bluetooth, but the a2dp or whatever protocol it uses normally doesnt work.
however calls are done using a2dp, so wtf?
can someone make a quick app that just forces ONLY s-voice and NAV in to mono?
the apps out there make everything go mono or nothing at all...sucks for voice call quality
I needed to revive this thread as a search for my problem led me to it.
1) Is anyone able to play a video on the S3 (GT-I9300 4.1.2) and stream the sound from the video to the car while connected via Bluetooth?
I am not.
2) S3 notification sounds do not play via the car's speakers when receiving a text message or email etc.
I can make and receive calls just fine and even play music from the S3 via BT by selecting the phone from the list of devices on the car's screen.
Blutooth / Voice App Issue - SOLVED
First of all this does work on my 2009 Highlander, but it's a bit Kuldgy.
BT Mono allows my voice app to work, but by itself it's not a solution. You have to activate it manually before using S-Voice, Google Voice or AVX. It opens the connection and has to be activated each time or it can be set to reconnect automatically…. Killing my radio.
Download the free version (I can’t access the play store to give you the link) and see if it works manually. If it works for your test then the rest should work as well.
Install Tasker:
Create a task to keep the screen from locking when your state is Bluetooth connected to the car device.
Create a Task (you don’t need it in a profile)
- Set bluetooth on (in case it’s off)
- Load BT mono (with auto on enabled in the BT mono app)
- Wait ~400MS
- Load App AVX (or S-Voice, or whatever)
- Wait 9 seconds
- Kill BT mono
- Kill BT mono root (it wasn’t always killing BT mono)
I’ve been thinking about trying to simply reboot the BT (BT off then wait then BT on) rather than kill an app.
You can add the task to your home screen as a widget…. Still not safe to do while driving.
That’s where GMD Gestures comes in. You set a swipe command, I use 2 fingers down, to launch the task.
Seems to work pretty well. I can keep my eyes on the road and still use voice commends. You do need to hang up the phone when you’re done talking, but I had to do that with Siri.
I still wish there was a force mono on all connections app, but I still haven’t seen one. AVX just added the ability to force mono for speech, it’s worked for other people, but I’m still trying to figure out why it doesn’t work for me (he's had reports that the Note 2 doesn't like his solution, Kudos to him for trying to add this).
Hope this helps
****UPDATE****
BT Mono may work for me because I'm rooted. According to the app on the store (pro version) Apparently Samsung, in an effort to prevent call recording, blocks the ability to re-route the microphone.
Car: 2012 Toyota RAV4 w/o Nav. head unit
Running AOKP 4.1.2 11.20.2012
Pairing and auto connecting without issue. A2DP audio works fine and meta data transfers if using Google Player.
The problem is that the phone is muted whenever the BT is connected. Notifications for new text messages or alarms can not be heard either from the car's system or the phone unless listening to an A2DP stream and are going totally unnoticed. Turn by turn navigation on the phone is equally useless because of zero audio.
Is there anyway to make the nav directions and other notifications appear to the car as an incoming call and be heard thru the car's system?
I'm not sure if this is a car or phone issue, or both. Maybe the ROM? It works fine in my Dodge Ram, but it does not have A2DP. I would gladly give up A2DP music streaming if the car's system would mute it's music source and push the notifications thru.
I have to get this resolved somehow even if it means a new head unit or phone.
Make sense? Ideas?
First android phone I've had that has this issue.
I have my phone paired with my car's OEM bluetooth (confirmed by my car), but everytime I try and stream a song it still plays through my phone speaker instead of my car, even though my car shows it playing. I've used 5 other android phones with my car with zero issues. Any ideas?
With the sim card issue and now this, I'm thinking of returning this phone.
I have no problems whatsoever. What rom are you running? Details?
Sent from my Viper DNA
I'd say its a simple menu option on the phone. Mine is perfectly happy to play music and navigation instructions through the Bluetooth. Are you able to make/receive calls through Bluetooth?
Try something for me.
Open up the YouTube app and at the top there will be a blue button. Press it. This toggles sound through speakers/Bluetooth.
Sent from my HTC6435LVW using xda app-developers app
brian85 said:
First android phone I've had that has this issue.
I have my phone paired with my car's OEM bluetooth (confirmed by my car), but everytime I try and stream a song it still plays through my phone speaker instead of my car, even though my car shows it playing. I've used 5 other android phones with my car with zero issues. Any ideas?
With the sim card issue and now this, I'm thinking of returning this phone.
Click to expand...
Click to collapse
I have never had your problem however. Since i have and the DNA after i paired the phone with my car. While in the Bluetooth setting i had to click the radio option to connect it. It never would automatically connect till after i did that. Now it connects when i turn it on.
damagickid said:
I have never had your problem however. Since i have and the DNA after i paired the phone with my car. While in the Bluetooth setting i had to click the radio option to connect it. It never would automatically connect till after i did that. Now it connects when i turn it on.
Click to expand...
Click to collapse
My wife's DNA autoconnects ever since we originally paired hers to her car, and I don't remember having to enable anything beyond just the initial pairing.
Settings menu for connection
brian85 said:
First android phone I've had that has this issue.
I have my phone paired with my car's OEM bluetooth (confirmed by my car), but everytime I try and stream a song it still plays through my phone speaker instead of my car, even though my car shows it playing. I've used 5 other android phones with my car with zero issues. Any ideas?
With the sim card issue and now this, I'm thinking of returning this phone.
Click to expand...
Click to collapse
Only one of two things I can think of:
- You get into the car with another device connected with AVRCP capabilities, and it's taking priority over your car's media audio connection. Thus, you're left with the car connected to phone audio, and your bluetooth headphones/Jambox/etc. playing music. HOwever, you specifically mentioned the music was playing through your phone speaker, so the only other possibility is...
- Go into settings, Bluetooth, and click on the sliders/settings icon next to your car's connection name. Ensure both Media Audio and Phone Audio are checked.
Beyond that, I would try unpairing all your Bluetooth profiles and reconnecting them. BT has been pretty finnicky for me, across handsets and accessories.
Sense devices haven't worked well in my car. Other devices have seemed to work a little better. But my car is a 2005. So think it depends on the car software. You might try upgrading the firmware on your car's setup if all of the other options fail.
No BT music streaming here too
Fastlivin said:
Only one of two things I can think of:
- You get into the car with another device connected with AVRCP capabilities, and it's taking priority over your car's media audio connection. Thus, you're left with the car connected to phone audio, and your bluetooth headphones/Jambox/etc. playing music. HOwever, you specifically mentioned the music was playing through your phone speaker, so the only other possibility is...
- Go into settings, Bluetooth, and click on the sliders/settings icon next to your car's connection name. Ensure both Media Audio and Phone Audio are checked.
Beyond that, I would try unpairing all your Bluetooth profiles and reconnecting them. BT has been pretty finnicky for me, across handsets and accessories.
Click to expand...
Click to collapse
I also do not get why my dna won't stream through BT in my car or truck. I mostly listen to Pandora...I know there is a BT setting in the app and I have it enabled. I can receive/make calls fine but if I want to stream Pandora through the vehicles speakers, I have to plug in the 3.5 mm jack. In my BT settings on the dna, I only have Phone Audio, no option for Media Audio? In BT settings, under Advanced, there is FTP server (not checked) and Message access, which is checked and that's it? I have not tried another music source to try to stream, but I'll try that next. Update: just tried Slacker radio and it doesn't come through the vehicles speakers either
---------- Post added at 11:23 AM ---------- Previous post was at 10:52 AM ----------
Bigandrewgold said:
Try something for me.
Open up the YouTube app and at the top there will be a blue button. Press it. This toggles sound through speakers/Bluetooth.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
For me, I do not see any blue button at the top in my YouTube app?
---------- Post added at 11:36 AM ---------- Previous post was at 11:23 AM ----------
damagickid said:
I have never had your problem however. Since i have and the DNA after i paired the phone with my car. While in the Bluetooth setting i had to click the radio option to connect it. It never would automatically connect till after i did that. Now it connects when i turn it on.
Click to expand...
Click to collapse
Where exactly is this "radio option" you mentioned? I do not see any setting for that in Bluetooth on the DNA, maybe you have that option in your BT settings in your car? Can you actually stream Pandora in your vehicle through BT on your DNA (stock?)
pumah350 said:
For me, I do not see any blue button at the top in my YouTube app?
Click to expand...
Click to collapse
You have to be connected to a Bluetooth device. Its next to the sear h button.
Sent from my HTC6435LVW using xda app-developers app
My car, when pairing asks for a second step to enable Bluetooth audio... it may be a setting within the cars BT system...
Sent from my Transformer Prime TF201 using xda app-developers app
There is a Bluetooth audio streaming problem with the recent non-GPS Toyota head units. I have a 2012 4Runner, and I'm only able to get the Google Play Music app to stream for a few seconds. The phone thinks it's still working, but nothing is getting through to the stereo. There was a thread about this started over on Rootzwiki. I've been told that the stock HTC music app will work, but in don't keep any media on my phone. I've tried Audible, Play Music, and Dog Catcher. Bluetooth calls work just fine.
pumah350 said:
I also do not get why my dna won't stream through BT in my car or truck. I mostly listen to Pandora...I know there is a BT setting in the app and I have it enabled. I can receive/make calls fine but if I want to stream Pandora through the vehicles speakers, I have to plug in the 3.5 mm jack. In my BT settings on the dna, I only have Phone Audio, no option for Media Audio? In BT settings, under Advanced, there is FTP server (not checked) and Message access, which is checked and that's it? I have not tried another music source to try to stream, but I'll try that next. Update: just tried Slacker radio and it doesn't come through the vehicles speakers either
Click to expand...
Click to collapse
It isn't enough that your head unit is "Bluetooth enabled". There are many capabilities: phone, hands free, BT audio, etc. On many models, only phone capabilities are included. For BT Audio to be output, you need a head unit that is A2DP capable (above, I typed AVRCP, which is incorrect - AVRCP allows the BT device to control playback...the RC stands for remote control). A2DP is the profile the BT device (in this case your head unit) uses to tell the phone what capabilities it can handle. In this case, it's only telling the phone it has headset capabilities, and therefore will never output audio. Solution: get a new head unit, or just continue to use the 3.5MM jack, which has two benefits: it's ****ing free, and you can take advantage of the Beats Audio amp within the phone.
FYI, with stock Hyundai, Kia, Ford Sync head units, I've been able to output all audio: Google Music, Pandora, Slacker, DoggCatcher, along with all system sounds and notifications. I really don't think this is a phone problem, it's usually something going wacky at the car's end. See bluefoam's comment above about having to enable A2DP in the car's settings. Never seen this, but proof of the idiocy of head unit makers sometimes.
Hope that helps. This doesn't seem to be an issue with the OP, because he said he'd been able to play music over BT with other phones, so I'm intrigued to know if this is a problem with an unchecked box like I mentioned, or if there's something else going on.
Fastlivin said:
It isn't enough that your head unit is "Bluetooth enabled". There are many capabilities: phone, hands free, BT audio, etc. On many models, only phone capabilities are included. For BT Audio to be output, you need a head unit that is A2DP capable (above, I typed AVRCP, which is incorrect - AVRCP allows the BT device to control playback...the RC stands for remote control). A2DP is the profile the BT device (in this case your head unit) uses to tell the phone what capabilities it can handle. In this case, it's only telling the phone it has headset capabilities, and therefore will never output audio. Solution: get a new head unit, or just continue to use the 3.5MM jack, which has two benefits: it's ****ing free, and you can take advantage of the Beats Audio amp within the phone.
FYI, with stock Hyundai, Kia, Ford Sync head units, I've been able to output all audio: Google Music, Pandora, Slacker, DoggCatcher, along with all system sounds and notifications. I really don't think this is a phone problem, it's usually something going wacky at the car's end. See bluefoam's comment above about having to enable A2DP in the car's settings. Never seen this, but proof of the idiocy of head unit makers sometimes.
Hope that helps. This doesn't seem to be an issue with the OP, because he said he'd been able to play music over BT with other phones, so I'm intrigued to know if this is a problem with an unchecked box like I mentioned, or if there's something else going on.
Click to expand...
Click to collapse
Yes, very helpful, thanks. And yea, its really not a big deal to plug in the jack...my car and truck both came with audio jacks so at least there's that.
I just installed the new update to Google Maps 7.0.2 and I have a question: When I am in my car, I use the Bluetooth connection so I can receive phone calls through the car speakers. If I use Google Navigation but say, I am listening to the radio, I can't hear the Navigation voice directions, since Google Maps is sending the audio through Bluetooth, but the car system is tuned to Radio, not Bluetooth.
Is there any way to force the audio instructions in Google Navigation through the phone speaker only when the phone is connected via Bluetooth? Otherwise, if you use Bluetooth for calls, you are forced to have your car audio on Bluetooth streaming all the time if you want to hear navigation instructions. What if you want to listen to radio or CD and at the same time hear the navigation instructions?
By the way, Waze has this setting. It is called "Play sound to phone speaker", which overrides the BT connection, which is in fact what I would like to do in Google Navigation.
Thanks!
mcuellar said:
I just installed the new update to Google Maps 7.0.2 and I have a question: When I am in my car, I use the Bluetooth connection so I can receive phone calls through the car speakers. If I use Google Navigation but say, I am listening to the radio, I can't hear the Navigation voice directions, since Google Maps is sending the audio through Bluetooth, but the car system is tuned to Radio, not Bluetooth.
Is there any way to force the audio instructions in Google Navigation through the phone speaker only when the phone is connected via Bluetooth? Otherwise, if you use Bluetooth for calls, you are forced to have your car audio on Bluetooth streaming all the time if you want to hear navigation instructions. What if you want to listen to radio or CD and at the same time hear the navigation instructions?
By the way, Waze has this setting. It is called "Play sound to phone speaker", which overrides the BT connection, which is in fact what I would like to do in Google Navigation.
Thanks!
Click to expand...
Click to collapse
It sounds like it might be an issue with your radio. I'll test mine and see what it does and let you know.
So I have a Ford Edge with a bluetooth receiver where I can play music, as well as some headphones, and I'm having intermittent issues when using this type of playback. The issue doesn't occur with my partner's Note 5, does anybody have any issues with stereo bluetooth? I'm close to writing to LG about it so they can log with (possibly) other reports for the same issue.
groovdafied said:
So I have a Ford Edge with a bluetooth receiver where I can play music, as well as some headphones, and I'm having intermittent issues when using this type of playback. The issue doesn't occur with my partner's Note 5, does anybody have any issues with stereo bluetooth? I'm close to writing to LG about it so they can log with (possibly) other reports for the same issue.
Click to expand...
Click to collapse
Just today i had issues with mine, i have one the parrot devices on my car and it picks up my iphone right away but i tried for about 2 minutes to play music from my v10 and it wouldn't connect to it, someones it connect right away its very off and on. I didn't try to unpair it and re-pair it though.
Am I reading that right, are both BT devices trying to connect at the same time? If so I had sorta the same problem in my Audi. I sometimes had to toggle Bluetooth on and off to get it to reconnect. But what I did was go into the Bluetooth settings for each device and specifically select the profile I want to use for that device. So for Audi MMI, which handles the phone calls, I selected the profile "Call Audio" only. Then for my headphones I selected the "Media Audio" profile only. I just figured that if two BT devices are fighting for the same profile only one is going to win it. And it seemed like it was a toss up which one got the call or media profile first.
turbophreak said:
Am I reading that right, are both BT devices trying to connect at the same time? If so I had sorta the same problem in my Audi. I sometimes had to toggle Bluetooth on and off to get it to reconnect. But what I did was go into the Bluetooth settings for each device and specifically select the profile I want to use for that device. So for Audi MMI, which handles the phone calls, I selected the profile "Call Audio" only. Then for my headphones I selected the "Media Audio" profile only. I just figured that if two BT devices are fighting for the same profile only one is going to win it. And it seemed like it was a toss up which one got the call or media profile first.
Click to expand...
Click to collapse
No, you are not . However, allow me to clarify that the devices I mentioned are having issues on their own when using the V10. One incident is with my car's stereo, if I'm lucky, the audio will hold or it will decide to be a douche and start getting choppy with 1 second gaps.
Also, I'm noticing with the WiFi that my signal is horrible, but my partner's Note5 is perfect and super quick. I really really like this phone, but these issues are a bit annoying.
I have problems with my car stereo too. When I get in the car, it will connect automatically and start playing like normal but only for a minute or two. Then bluetooth will disconnect. So, I turn bluetooth off and on and, it will stay connected after that.
I also have a bose bluetooth speaker which doesnt have any problems.
I just found this thread after posting to the rom thread I am using...
I am having a minor annoyance with Bluetooth and media streaming.
When the phone auto pairs to my cars stereo head unit (Kenwood KDC-BT762HD), system sounds/calls etc come through the car fine, but not Media like music, videos etc.
Phones says it is paired to Media and the head unit does show the song info and I can control the app via hardware buttons on the unit, the phone acts as if it is playing, but no sound is heard. I have to turn bluetooth off then on or re-pair and then it works fine. I thought it was just the music app I use, but its any apps that play media like music or videos, including Pandora and Youtube.
I have 4 varying bluetooth headphones and they auto- reconnect to the phone just fine with no issues.
Anyone else having a an issue like this with any of their car stereos? My G3 never did this.
Known issue
speedingcheetah said:
I just found this thread after posting to the rom thread I am using...
I am having a minor annoyance with Bluetooth and media streaming.
When the phone auto pairs to my cars stereo head unit (Kenwood KDC-BT762HD), system sounds/calls etc come through the car fine, but not Media like music, videos etc.
Phones says it is paired to Media and the head unit does show the song info and I can control the app via hardware buttons on the unit, the phone acts as if it is playing, but no sound is heard. I have to turn bluetooth off then on or re-pair and then it works fine. I thought it was just the music app I use, but its any apps that play media like music or videos, including Pandora and Youtube.
I have 4 varying bluetooth headphones and they auto- reconnect to the phone just fine with no issues.
Anyone else having a an issue like this with any of their car stereos? My G3 never did this.
Click to expand...
Click to collapse
This is a fairly known issue to specific cars.
check here http://forums.androidcentral.com/lg-v10/664713-lg-v10-bluetooth-audio-not-working-2.html
Also, I have a gmc canyon 2015. I have the same issue. I stopped using my car's bluetooth , I now only use aux cable. Amazing in 2016 and I still have to use aux cable. I am looking to moving to one plus 3 because of this issue. marshmallow also brought gps bugs on top of the bluetooth one.
jmichaels1982 said:
This is a fairly known issue to specific cars.
check here http://forums.androidcentral.com/lg-v10/664713-lg-v10-bluetooth-audio-not-working-2.html
Also, I have a gmc canyon 2015. I have the same issue. I stopped using my car's bluetooth , I now only use aux cable. Amazing in 2016 and I still have to use aux cable. I am looking to moving to one plus 3 because of this issue. marshmallow also brought gps bugs on top of the bluetooth one.
Click to expand...
Click to collapse
I don't think its a MM issue or a vehicle specific issue (and i have an aftermarket stereo head unit) I have not had this issue with any of my other MM (or LP)devices I have tried with the radio. I have a spare LG G3 and a Moto X Pure that is running MM that is running MM and many of the mods and same apps I use on my G3 and now V10, again, no BT issues.
I am not having any disconnect or not pairing issues at all....just the odd thing that the media sounds don't work unless i disconnect/then connect the phone to the head unit when I get back into the car and power up and it auto pairs.
My folks have a much more serious issue with their 2015 Ford Escape and Ford Sync and their Samsung S4's they both have. Phone pairs and works fine once, but then the mic acts like its muted, no one can hear u, even if u un-pair the phone from the car, the phone itslef no longer outputs sound at all. You have to reboot the phone in order to get it to work again. It did it when the phones were on Android L and still after the MM update. Web search finds many folks with same issues in regards to that issue. (which is not the issue i am having at all, infact, their phones work fine on my car).
I found a work around for my issue. Since i simply just needed to disconnect and reconnect the BT to my car's head unit, found a widget that does just that. A2DP Connect2. Car auto pairs, i tap widget once, disconnects, wait a few sec, tap again, connects, my media streaming now works fine.
Still a annoyance, but much better than having to navigate menus and such.
BT issues fixed with update to 20j.
I can confirm that the annoying Bluetooth media stream issue in 20e, where you had to re-connect the phone or no media stream....is fixed in 20j. Auto connect works perfectly every time now on my Kenwood head unit.