Related
i am from galaxy mini forum so get a galaxy s2 but how to know if it is S2 or S2 GT-i9100 o and what the diffirence?? and can you gays pleas link me to a tut aboug instaling costome recovery, which ODIN to use and so on .... last thing which is the best stable rom to use .....thanks in advance
1) Check the sticker on the phone chassis under the battery.
2) Differences between SGS2 variants ? Wikipedia.
3) Just about everything you need to know to get you started is in the Stickies.
4) There's no such thing as the "best stable rom to use". There are a heap of custom roms for the SGS2, it's an individual preference thing. And because no two people use their phone the same way or have it setup the same, and because component-wise no two phones come out of the factory exactly the same, your experience with a particular rom will most likely vary from mine.
The best thing to do is to get your phone rooted, preferably with CWM installed. This will enable you to backup, restore & flash roms/kernels in a matter of minutes. You can than try a bunch of roms for yourself. If you find you don't like a rom you try, it's easy to go back to your previous setup easily by restoring a backup; recommended regularly/before you flash anything to your phone.
ok so by flashing cwm and then a costom rom the divise will root by it self and do i have to flash a stock ics rom to install a costom ics rom??????
Lackchoo,
Flash one of Chainfire's kernels. His instructions are very clear. That will give you root and CWM, and possibly also a yellow triangle at startup which you shouldn't worry about at all.
You don't need to flash a stock ICS ROM to flash a custom ROM. After rooted, in CWM, just install the downloaded ZIP ROM file of the custom ROM. You will keep root and triangle will go away.
Ditto what the above person said about ROM's. However, you can try Cyanogen (Do a 'stable' release, not a 'nightly'), its the most 'popular' ROM in terms of numbers. One can't and shouldn't say which one is best. But for a newbie, I think Cyanogen is a good place to start. Perhaps it will give you the least issues and the most 'oohs!' for your initial newbie effort
I don't have the links with me from the smart phone, but just search 'chainfire kernel root galaxy s2' and 'cyanogen galaxy s2' and you should find the relevant thread. Read it slowly and repeatedly! I know I had to
Sent from my GT-I9100 using Tapatalk 2
Hello everyone,
Sorry if this is the wrong area, but it felt right at first look. I have a International Galaxy S3, rooted, but still didn`t change the ROM... Since o rooted it to use some apps, I've noticed i couldn't install new updates anymore, so I started looking out for a new ROM.
I got interested in Omega ROM, like this post:
http://forum.xda-developers.com/showthread.php?t=1720628
My software is still 4.1.2, can I install a 4.2.2 version of Omega, do I need to take some step before?? Besides, is it stable, since it`s not out yet for galaxy s3?? If I install, can I go back to 4.1.2 smoothly??
I'm asking that because I had a Galaxy S1 and had to install a bootloader before changing the room version. Now I'm a little confused...
Thanks for your help
pauloeavf said:
Hello everyone,
Sorry if this is the wrong area, but it felt right at first look. I have a International Galaxy S3, rooted, but still didn`t change the ROM... Since o rooted it to use some apps, I've noticed i couldn't install new updates anymore, so I started looking out for a new ROM.
I got interested in Omega ROM, like this post:
http://forum.xda-developers.com/showthread.php?t=1720628
My software is still 4.1.2, can I install a 4.2.2 version of Omega, do I need to take some step before?? Besides, is it stable, since it`s not out yet for galaxy s3?? If I install, can I go back to 4.1.2 smoothly??
I'm asking that because I had a Galaxy S1 and had to install a bootloader before changing the room version. Now I'm a little confused...
Thanks for your help
Click to expand...
Click to collapse
As long as you have an I9300/T you can install any rom, just make sure you do a nandroid before and some wipes as instructed in the thread. The instructions on how to flash e.g. Omega will be in the thread for sure. In addition you have to make sure, at the moment at least, to have the right kernel (e.g. Siyah will not work with the newer 4.2.1/4.2.2 roms).
read the basics first
Hi all,
A few newbie queries, if anyone will indulge me please?
I've just got an S3 international verison, having had various Nexus's and HTCs in the past, which I've rooted & used custom roms on. I got this s3, rooted it, then started looking for roms, but i'm a bit lost. It's tricky when you're new to a model of phone and have to re-learn the root nuances.
One of the apps I need is ARLibertator (for pionieer's appradio) which doesn't play nice with any ASOP roms, so I presume I'm going to be stuck with stock.
So far, I've rooted, but haven't updated from mb5>mg4. I've backed up the factory state with a clockwork mod backup and i've done a dump of the EFS using K tool.
Can I update from mb5 > mg4 without any issue using KIES, or do I need to be careful about the change it makes to the EFS?
Also, if i decide not to bother trying to use ARLiberator, am I good to try Cyanogen or similar now, or have I missed any steps or done the wrong thing?
There are stock based custom roms .
Kies will remove root .
Thanks - when you say 'remove' - perfectly safe to re-root the same way again after the update?
Also, what terminology would I need to search for for Roms based on stock - something like this: http://forum.xda-developers.com/showthread.php?t=1797334
Thanks for the help - really appreciate it.
james03 said:
Thanks - when you say 'remove' - perfectly safe to re-root the same way again after the update?
Yes just reroot .
http://forum.xda-developers.com/forumdisplay.php?f=1566
Mostly Samsung based roms but not all of them
Click to expand...
Click to collapse
Yep as jje linked "android development" is mainly samsung based roms where as aosp are mainly in "original android development" as they're original, not reworks if existing work.
There are some aosp roms in "android development" as they are unofficial cm builds for example.
Samsung rom threads usually have the samsung build number in the thread title, eg XXEMG4
Sent from my GT-I9300 using Tapatalk 4
There are a lot of people joining xda on daily basis, and there are a lot of repetitive questions being asked which fill up Development threads. Point them here. Feel free to ask or answer questions. Idea of this thread is to get users to help other users with their problems/questions. Please do not spoon feed, but rather point in the direction where that user can find an answer and educate himself
I don't actually have the GS3 unfortunately, but in order to make XDA a better place, I thought I'd open up a help thread for those who need it. I won't be able to give S3 specific help, but I can help in terms of general questions. Hopefully some of the experienced S3 help out on this thread, because it'd make everything easier. Thanks!
First thing first. I strongly advise you to read THIS thread before posting ANYTHING on XDA.
Then, have a quick look at the names of threads in post no2, you might find what you need right away.
For ROM issues please do mention in your post about:
ROM name
ROM version and base
kernel version and its settings
any mods applied on top of it
flashing "style" aka dirty or clean
something like this
...and be sure you have asked before on the ROM thread unless you have less than 10 posts on XDA
Third. Even if you do get your question answered, please, do come back and read threads in post no2 (coming later as soon as we start getting the guides) to educate yourself. You'll be surprised how much time and frustration it will save you in the future.
ASK ANY QUESTION HERE,adb, drivers, superCID etc...... You will either get an answer or will get pointed in the right direction.
No abuse towards noobs tolerated here! No question is stupid in this thread.
***I feel that a little OT is healthy to the success of this type of thread. The people here who help the most will develop a comradery therefore OT is allowed within reason. Common sense will be applied ***
HALL OF FAME
People who contributed most to this thread and helped countless number of people with their problems/questions. In no particular order.
Currently none. Hopefully soon.
Big thanks to Undercover and Xanthrax for this thread model
Reserved
Good job!
Stuck
Hey guys, i'm sort of a noob on these forums so any help would be great!
I've had previous experience with rooting because of my S2, no problems at all. I got my s3 about a month ago and I've been trying to figure out how to root it. It's a GT-I9300T ( Australian model ). It has a lot of Vodafone bloatware, however it's unlocked as i'm using an Optus sim card. I've also read that there aren't many differences between the international model and the T model, so any international ROM should work fine. It's running 4.3. I've read about how KNOX is built into 4.3 and makes rooting difficult by blocking the installation of custom Roms and disabling superSu. I'm not sure if i have Knox though, because i don't have a KNOX app installed; there are no KNOX related apps installed on my phone ( according to the all section of my applications manager ) and it says nothing about the KNOX counter in download mode. Is KNOX still present on my phone, and will i be able to install customs roms?
Also, what would be the best method of rooting? I have tried the saferoot method by Mrw0lf on YouTube, which is made not to trigger Knox. I've read about CF root and other methods involving Odin, have not tried any yet because i'm scared of bricking my phone. Any help or link would be helpful. Also, if something goes wrong; would i be able to flash a stock 4.3 ROM onto my phone using Odin? I'm downloading it now from sammobile and i was wondering if flashing anything through Odin would cause problems.
Lastly, is there a way to backup my EFs before rooting? I can't find them through the default file explorer and the folder is empty in 3rd party ones. I can't seem to find them when i go through my phone on my computer, i just want a backup before i try to root.
Anyway, vital phone info:
Model: GT-I9300T
Version: 4.3
Sorry for the long post, but any help would be cool. Also, i'm not that good with all the technical things behind rooting such as CSCs, basebands and such, so any simple explanation would be nice
Thank you! :fingers-crossed:
Good morning
Dont worry about knox
There no knox for S3 now matter what variant
Now secondly.
U can flash everything from i9300 on your i9300t however its advisable that when u flash roms that u maintain or re-flash afterwards the appropriate modem
As the only difference between models is the band frequency
To root it ... For myself the easyest way is ...
Grab philz recovery
Flash it with Odin
Afterward boot into recovery
Go to advanced and choose re-root system
Then just boot the ROM go to market and download supersu you're good to go
About backup efs there's a loooooot of apps to do so u just need the pick the one who's flavour suit u best
Take care
If u have doubts just pm me
Enviado do meu GT-I9300 através de Tapatalk
---------- Post added at 11:23 AM ---------- Previous post was at 11:23 AM ----------
PS: u can only backup your efs after u root your device
Enviado do meu GT-I9300 através de Tapatalk
SnowPluralism said:
Good morning
Dont worry about knox
There no knox for S3 now matter what variant
Now secondly.
U can flash everything from i9300 on your i9300t however its advisable that when u flash roms that u maintain or re-flash afterwards the appropriate modem
As the only difference between models is the band frequency
To root it ... For myself the easyest way is ...
Grab philz recovery
Flash it with Odin
Afterward boot into recovery
Go to advanced and choose re-root system
Then just boot the ROM go to market and download supersu you're good to go
About backup efs there's a loooooot of apps to do so u just need the pick the one who's flavour suit u best
Take care
If u have doubts just pm me
Enviado do meu GT-I9300 através de Tapatalk
---------- Post added at 11:23 AM ---------- Previous post was at 11:23 AM ----------
PS: u can only backup your efs after u root your device
Enviado do meu GT-I9300 através de Tapatalk
Click to expand...
Click to collapse
Thanks for the reply!
I just rooted my phone using Cf auto root. I forgot the warranty was expired so why not It ended up working, now running CyanogenMod 11 nightly About the modem, the reception seems the same. The signal i got before I rooted wasn't that great, haha. But i'll probably flash the modem anyway, just in case. I found a thread with most of the modems for the s3 here:
http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-modem-radio-collection-t1740061
All the modems are for jellybean, however the ROM i'm on ( CyanogenMod 11 ) is on kitkat. Can i flash any of those modems? For the T model, they say there's no regional or carrier specific one, even though i checked my modem on sammobile and it's not listed in the thread. The latest one is for 4.1.2, i'm on 4.4.2. Should i flash it? Also, can you flash it in CWM, or does it have to be through Odin?
Edit: Seeing as you're a fellow S3 user, have you experienced any lag or freezing with your phone? It happened quite a lot pre root, but i just thought it was due to the bloatware. And Touchwiz, haha. But it's happening with CyanogenMod 11 as well. I know that it's a nightly and that bugs are to be expected however i have an S2 running CyanogenMod 11 as well, and there's nowhere near as much lag. Any ideas? I reset the phone and re installed the ROM twice, mainly because i forgot to flash Gapps XD Any ideas? Should i do a full factory reset, free up some space? I know that there's 2gb left on both the phone and my SD card.
Anyway, thanks for all of your help so far!
DoctahG23 said:
Thanks for the reply!
I just rooted my phone using Cf auto root. I forgot the warranty was expired so why not It ended up working, now running CyanogenMod 11 nightly About the modem, the reception seems the same. The signal i got before I rooted wasn't that great, haha. But i'll probably flash the modem anyway, just in case. I found a thread with most of the modems for the s3 here:
http://forum.xda-developers.com/galaxy-s3/general/ref-galaxy-s3-modem-radio-collection-t1740061
All the modems are for jellybean, however the ROM i'm on ( CyanogenMod 11 ) is on kitkat. Can i flash any of those modems? For the T model, they say there's no regional or carrier specific one, even though i checked my modem on sammobile and it's not listed in the thread. The latest one is for 4.1.2, i'm on 4.4.2. Should i flash it? Also, can you flash it in CWM, or does it have to be through Odin?
Edit: Seeing as you're a fellow S3 user, have you experienced any lag or freezing with your phone? It happened quite a lot pre root, but i just thought it was due to the bloatware. And Touchwiz, haha. But it's happening with CyanogenMod 11 as well. I know that it's a nightly and that bugs are to be expected however i have an S2 running CyanogenMod 11 as well, and there's nowhere near as much lag. Any ideas? I reset the phone and re installed the ROM twice, mainly because i forgot to flash Gapps XD Any ideas? Should i do a full factory reset, free up some space? I know that there's 2gb left on both the phone and my SD card.
Anyway, thanks for all of your help so far!
Click to expand...
Click to collapse
If u flashed cm u have retained same modem so no need to update modem
Just leave it be.
About lag no my phone runs just good no matter what aosp or recent stock rom
Check your kernel config or go for a custom one a and set him up to what suits u best.
I use agni kernel on cm alongside with a optimised profile
And even with a UV of CPU and GPU my phone runs real smooth and saves juice
Enviado do meu GT-I9300 através de Tapatalk
ive got experience with flashing custom roms and know how to do it but im quite paranoid which is why i have this question. Im currently running foxhound 2.4 on S# GT-i9300 with siyah kernel and i want to flash slimkat 4.4.2 build 3. i was just wondering if siyah kernel will get in the way of the flashing. Will i need to flash stock kernel then flash slimkat/gapps or does slimkat have install its own kernel in which case i guess i should just flash normally.
Device: galaxy s3 i9300
ROM name: Foxhound
ROM version and base: 2.4
Build number: jzo54k.i9300xxemb5
kernel version and its settings: 3.0.31-siyah-1.8.9+
Khanster97 said:
ive got experience with flashing custom roms and know how to do it but im quite paranoid which is why i have this question. Im currently running foxhound 2.4 on S# GT-i9300 with siyah kernel and i want to flash slimkat 4.4.2 build 3. i was just wondering if siyah kernel will get in the way of the flashing. Will i need to flash stock kernel then flash slimkat/gapps or does slimkat have install its own kernel in which case i guess i should just flash normally.
Device: galaxy s3 i9300
ROM name: Foxhound
ROM version and base: 2.4
Build number: jzo54k.i9300xxemb5
kernel version and its settings: 3.0.31-siyah-1.8.9+
Click to expand...
Click to collapse
I think you should probably full wipe before flashing another rom. Then you should be good to go to flash slimkat and gapps.
Sent from my Nexus 4 using Tapatalk
and youll need to change kernel.
Syah Eol on 4.1.2
Enviado do meu GT-I9300 através de Tapatalk
SD Issues ? backwards "u"
My Wife is on her 2nd SD card with the same issues. I copy all of her pics and some videos from her move them to the Sd card. When going into my files it says there is 500+gbs on it! The file path extsdcard/Android has 467 gbs and 471 folders. Then there is a data folder but the D in data is a backwards u then ata. This folder says it is 467gbs with all folders named with crazy looking characters. I did try and search forums but could not find where to post and didn't want to get yelled at by the "Geniuses" on here for posting in the wrong place or not searching well enough. So if u could please get me to the right place it would be much appreciated. All the files are pics and vids of kids and thankfully we have auto backup in with google otherwise it seems we would lose all photos and vids. Thanks. Please see attached pics for reference
S3 4.0.4 stock rom
I had installed android 4.3 on s3 but then I installed 4.0.4 after that I had no gsm connectivity see the block sign between battery and wifi. I have gsm connectivity on 4.3 but not on 4.0.4. A guy told me that it has something to do with the bootloader. I wish to install 4.0.4 stock ICS BTU rom if there's a way do tell me. Thanks in anticipation!
i am using GlamourS4 5.0 rom and googy max2 kernel
the first problem i have is when i pressed the emergency call button on the lockscreen,
it did show anything such as the keyboard and the signal will stop a few seconds and come back.
second, i found the nfc not working anymore in my phone.
the nfc and s beam tag are greyed when i try to turn them on.
can anyone can solve my problems?
Anyone for my weird Network problem...?
I recently rooted my S3 via the CF Root method. Flashed CWM Recovery 6.0.4.4 via Odin.
That's it.
And now this weird problem-
My network is lost anytime! And the phone even doesn't say "Not registered on network" or something like that!
My phone was working properly and suddenly a friend of mine messaged me that he tried calling me but it said that my phone was switched off! I also noticed that at time even the data connection was not working. NO! It's not that it didn't show it isn't connected to the network or the data is disabled! The signal in the status bar was of 4 bars as it is and there was this symbol of 3G beside it. I tried calling my friend but the call got cancelled! I redialed, I didn't hear anything and then again the vibration saying the call was cancelled! I called up on my S3 through my landline number which also said that it was switched off -but not immediately. Whenever someone called me, they didn't hear anything for a long time of a minute or two and THEN it said that my mobile was switched off. I tried selecting my network operator manually, it said 'Registered on Network' but still I couldn't receive or make calls or use my internet data. But I could always send or receive SMSs!! It means it was connected to my network. The only solution was to reboot the phone after which it worked fine for a few hours. FOR FEW HOURS ONLY!
Now it happens at least 2-3 times per day and it has been important for me to check whether the data connection actually working and I'm able to access the internet or not because that's the only way to find whether someone can call me or not!
How do I fix this? I'm having my exams now and I don't have time to setup my phone again by changing ROMs!
Please tell me a way to fix this without changing my ROM!
I'm on Android 4.3 Stock ROM.
Unable to download Add on on Triangle Away V 3.26 even i do have Internet
Does anyone experience this message on Triangle Away V 3.26. "A fatal error occured while downloading the package. Please make sure you have a connection to the internet and try again later." ("I do have Internet Connection")
Google search question
Hello everyone.
I have noticed a strange behaviour of Google search after flashing SlimKat 3.9 and 3.10. Settings for search applications and contacts on the phone are gone. Is it a new update from Google or a bug? Fresh install didn't help. Screenshot attached.
Device: Galaxy S3 GT-I9300
ROM name: SlimKat
ROM version and base: 3.10 weekly
Kernel: Boeffla-Kernel Omni 2.2-rc1
Google search version: 3.3.11.1069658.arm
galaxy s3 specification
Hi im buying a galaxy s3 from a site that im pretty sure is reliable but before i buy i want to know if what he wrote is correct
the Module is :I9300
he says that the Gpu is: Mali-400MP
and i saw in some forums that its supposed to be Mali-400MP4?
can you please tell me which one is suppose to be in Galaxy s3
Thank you
isragal said:
can you please tell me which one is suppose to be in Galaxy s3
Click to expand...
Click to collapse
Gpu for I9300 is ARM Mali 400 MP, as far as I know.
abubakarsohail said:
I had installed android 4.3 on s3 but then I installed 4.0.4 after that I had no gsm connectivity see the block sign between battery and wifi. I have gsm connectivity on 4.3 but not on 4.0.4. A guy told me that it has something to do with the bootloader. I wish to install 4.0.4 stock ICS BTU rom if there's a way do tell me. Thanks in anticipation!
Click to expand...
Click to collapse
Could be to do with the EFS partition. 4.3 uses a different version and apparently problems can occur when trying to revert to an earlier version. As far as I have read elsewhere, the problem can be verified by checking the IMEI number in settings - if it is all zeros it has been corrupted and will cause what you describe. I'm afraid I don't have a solution but hopefully this info might help you move a bit closer to one.
Another SlimKat question. According to battery stats, it seems that my wi-fi is always on. I've used 3g only since last charge and wi-fi is off in settings. Can it be helped somehow? Screenshot attached.
Device: Galaxy S3 GT-I9300
ROM name: SlimKat
ROM version and base: 3.10 weekly
Kernel: Boeffla-Kernel Omni 2.2-rc1
I Have the SM G925Z Version of the galaxy s6 Edge [Japan SoftBank]
I See many Roms that say "Works with many g925 Versions !" but the Japanese Z Version is never listed anywhere.
only the F T U V P etc etc versions.
If I use TWRP 2.8.6.0 to backup my current Rom, can I try these other Roms and safely return to my Stock Rom
if cell or wifi service stop working? If I try 5.1.1 Roms, I can not return to 5.0.2 roms?
Can I use TWRP to install a 5.1.1 rom that I download, even while my current Rom is 5.0.2 ?
or can I only install Roms using Odin Flash tool ?
My ZTE Warp phone was able to install Roms from downloaded Zip files with TWRP.
But I am not 100 % sure about the process.
RecIV said:
I Have the SM G925Z Version of the galaxy s6 Edge [Japan SoftBank]
I See many Roms that say "Works with many g925 Versions !" but the Japanese Z Version is never listed anywhere.
only the F T U V P etc etc versions.
If I use TWRP 2.8.6.0 to backup my current Rom, can I try these other Roms and safely return to my Stock Rom
if cell or wifi service stop working? If I try 5.1.1 Roms, I can not return to 5.0.2 roms?
Can I use TWRP to install a 5.1.1 rom that I download, even while my current Rom is 5.0.2 ?
or can I only install Roms using Odin Flash tool ?
My ZTE Warp phone was able to install Roms from downloaded Zip files with TWRP.
But I am not 100 % sure about the process.
Click to expand...
Click to collapse
First the s6 edge is a different style of device. To install 5.1.1 roms on the device you have to be on 5.1.1. Same with 5.0.2. Yes you can try any rom from the s6 and the s6 edge rom so long as you flash a special kernal for your device that makes the rom work on your device. If cellular data does not work, revert to your nandroid backup of your origonal os and flash another rom and you'll be good if that one works. Just repeat if the roms dont work or if you get tired of it then just stick with your stock rom which should be your nandroid backup.
Sent from my SM-G925P using Tapatalk
Thank you. I can understand this, except for the kernal part, please explain.
How can I backup my current Kernal so that I can return to my Stock Rom backup.?
will a TWRP Nandroid backup do that automatically ?
how do I install the correct Kernal? with TWRP ?
for example, from the ROM installation , it says
[5]Install Zip from storage
[6]Flash The Capsule ROM
[7]Flash arter97 kernel
[8]Flash SuperSU
[9]Reboot
Im assuming 5 means, copy the rom to the phone, 6 means use TWRP to install,
so flash the kernal after the rom ? with Twrp ?
how can I backup my kernal first? so that I can return to my 5.0.2.
and last question, you said I need to be on 5.1.1 to try 5.1.1 roms.
the Japan SM g925Z is a 5.0.2 rom atm, they never updated to 5.1.
most of the roms I see are 5.1.1
Does that mean there is no way to upgrade to 5.1.1 while on 5.0.2 ?
or does that mean, if I flash a new TWRP and 5.1.1 Rom, I can just never return to 5.1.1 ?
Does TWRP Mean Kernel ?
maybe that is what I am missing.
I already have a working TWRP.
some roms do not mention flashing kernels in the installation, some do,
does that mean it does not matter? or does that mean that the installation guide is terrible and people are going to brick ---- if they dont know about it ?
Im not exactly sure the difference between kernel and Rom.
To answer your first question, the nandroid backup you do in twrp backs it up because it is a required portion of your rom. Which also answers your second question as yes.
The answer to your third question is you have to find a flashable zip of a custom kernal for your device. You can also try restoring your boot from the nandroid which contains the kernal and if that one doesnt work flash the custom kernal zip.
Next i need a link to the rom your trying to flash to check it out.
The only way to install 5.1.1 roms is to be on that android version. The reason is that android uses an sdk platform and 5.0.2 uses sdk 21 and 5.1.1 uses sdk 22 so those are incompatable with each other.
No way to update that device to 5.1.1 unless it is released for that device or unless the hardware sources are released for aosp roms which may be a while where samsung has not released them yet due to the new Exynos processor that they recently created.
No twrp is your recovery but it backs up your kernal with the backup.
Those roms are for specific device varients and will work without installing a kernal because the kernal that it needs is for the devices they are meant for.
The others that say install kernals are ones that didnt have the kernal put in the rom zip.
Sent from my SM-G925P using Tapatalk
---------- Post added at 02:47 AM ---------- Previous post was at 02:45 AM ----------
Either that or they didnt modify the kernals in the rom zip to the specifacations that they wanted so they fixed it and posted the kernal.
Sent from my SM-G925P using Tapatalk
thank you, that does explain alot.
I am not sure which Rom I should try. None of them actually say sm g95z.
Which roms would you recommend I try first?
I am not sure any will work, they all appear to be 5.1.1 only.
which means my 5.0.2 system can not test any of them.
or more specifically, if I upgrade to 5.1.1, and they fail to connect to wifi or cellular, then I can not return to 5.0.2 I guess.
Do you know of any that are 5.0.2 ?
those should be safe to try I guess.
I just want to get rid of the 500 retarded A-- Samsung apps that auto update.
I dont need Sfinder X_x, I dont need quick connect, I REALLY dont want virus protection from samsung clogging up my performance.
I have read about build.prop tweaks and updates, but the sm g925Z version did not get 5.1.1 updates, so those fixes do not work.
I do have Root access already, but with TWRP 2.8.6.0 (Because its said that it doesnt trip knox).
but I can not un-install these fkn bloatware apps, even with root access.
This appears to be a 5.0.2 Galaxy S6 Edge Rom.
http://forum.xda-developers.com/gal...edge-g925fxxu1aocv-v1-0-deodex-aroma-t3102974
but it says G925FXX, my phone is G925ZZ
I should be able to test it, and return to my g925ZZ TWRP backup pretty easily right ? since it is 5.0.2 ?
Just to confirm for other people.
I tested the VNRom 5.0.2 for G920F
it ran like S--T.
I used TWRP backup to go back to Stock 5.0.2 just fine.
no problems.
RecIV said:
thank you, that does explain alot.
I am not sure which Rom I should try. None of them actually say sm g95z.
Which roms would you recommend I try first?
I am not sure any will work, they all appear to be 5.1.1 only.
which means my 5.0.2 system can not test any of them.
or more specifically, if I upgrade to 5.1.1, and they fail to connect to wifi or cellular, then I can not return to 5.0.2 I guess.
Do you know of any that are 5.0.2 ?
those should be safe to try I guess.
I just want to get rid of the 500 retarded A-- Samsung apps that auto update.
I dont need Sfinder X_x, I dont need quick connect, I REALLY dont want virus protection from samsung clogging up my performance.
I have read about build.prop tweaks and updates, but the sm g925Z version did not get 5.1.1 updates, so those fixes do not work.
I do have Root access already, but with TWRP 2.8.6.0 (Because its said that it doesnt trip knox).
but I can not un-install these fkn bloatware apps, even with root access.
Click to expand...
Click to collapse
How did you the root access for the sm-g925z?
I too have the same device and searching for the root access.
Please reply which twrp you used and SU file?
Please post link to the files well..
Oh yeah if you have the link to download the stock rom 5.0.2 for the device post it as well.
It will be great help.
Thanks..
I searched alot.
I did not find and roms that will work.
I did not find stock rom also.
Did backup my stock rom with twrp. I posted the links recently i think.
Custom rom
RecIV said:
I searched alot.
I did not find and roms that will work.
I did not find stock rom also.
Did backup my stock rom with twrp. I posted the links recently i think.
Click to expand...
Click to collapse
Hello, Have you found any compatible rom?