[Q] Custom Rom Revolutionary S5 V3 Camera and Phone problem - Galaxy S III Q&A, Help & Troubleshooting

Hello,
I just installed Custom Rom Revolutionary S5 V3 on my Galaxy S3 (I already did full wipe), the custom rom looks pretty good but there are some problem about view in Phone and Camera application as showed in the attached picture. Does anyone have the same problem? Is there a fix?
Thank you.

kronozboy said:
Hello,
I just installed Custom Rom Revolutionary S5 V3 on my Galaxy S3 (I already did full wipe), the custom rom looks pretty good but there are some problem about view in Phone and Camera application as showed in the attached picture. Does anyone have the same problem? Is there a fix?
Thank you.
Click to expand...
Click to collapse
Wrong DPI installed in the aroma installer. You should've chosed the samsung stock DPI which is i think 290 DPI ? Im not sure.

xKarlo said:
Wrong DPI installed in the aroma installer. You should've chosed the samsung stock DPI which is i think 290 DPI ? Im not sure.
Click to expand...
Click to collapse
Thank you very much

Related

Omega v5.2 ROM (default version) vs stock firmware

Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
NocNoc9595 said:
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
Click to expand...
Click to collapse
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
JJEgan said:
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
Click to expand...
Click to collapse
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
NocNoc9595 said:
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26636429&postcount=166
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
Have you done ANY research in the main thread? I don't think so, as all of this is covered there, including instructions (theres even a video to walk you through it). Don't be lazy.
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
A full wipe is the recommend, because then you have a clean installation and you beware of strange failures.
An instruction how you should flash Omega ROM is in the development thread (4th post) --> Installation Guide
I don't know if your phone is rootet yet, if so skip the first step and start with booting in CWM recovery.
Had used Omega on my SGS II, now using Omega on SGS III since 3.0. Works great for me, no errors whatsoever.
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
n70shan said:
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
Click to expand...
Click to collapse
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
saldawop said:
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
Click to expand...
Click to collapse
You have to install it with CWM:
1. Reboot to Recovery (CWM-Menu)
2. Select the zip-File
3. Enjoy
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Shug69 said:
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
Click to expand...
Click to collapse
i am running omega 5.2 and i assure you i dont have the problems you mentioned... did you do a full wipe install or you just flashed it without factory reset?
irishbogman said:
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Click to expand...
Click to collapse
As per all Omega no wipe necessary . Wipe only if you hit problems .
jje

[Q] Pardus hd 4.1.2 S4 Edition FINAL

Hi. I have installed Pardus HD version 4.1.2 S4 Edition FINAL. After finishing the installation, I have then installed Deluxe Settings through Play Store and have made some tweaking using it. Is that all that I need to be able to fully "enjoy" the greatness of the ROM?
If so, am I able to flashed another theme to this ROM as I am not a fan of the white S4 theme that has been included with the ROM?
Really hope to have an answer to this. I'm merely a noob and needs confirmation before I accidently brick my phone.
Thank you in advance!
wani08 said:
Hi. I have installed Pardus HD version 4.1.2 S4 Edition FINAL. After finishing the installation, I have then installed Deluxe Settings through Play Store and have made some tweaking using it. Is that all that I need to be able to fully "enjoy" the greatness of the ROM?
If so, am I able to flashed another theme to this ROM as I am not a fan of the white S4 theme that has been included with the ROM?
Really hope to have an answer to this. I'm merely a noob and needs confirmation before I accidently brick my phone.
Thank you in advance!
Click to expand...
Click to collapse
You should be able to flash themes, it's not highly recommended to flash theme on an existing theme, but I do it all the time and I've never had a problem. The worst that could happen is the you get a bootloop, just reinstall the rom and that's it
Danny044 said:
You should be able to flash themes, it's not highly recommended to flash theme on an existing theme, but I do it all the time and I've never had a problem. The worst that could happen is the you get a bootloop, just reinstall the rom and that's it
Click to expand...
Click to collapse
Hi Danny. If I were to change the theme, I should get the theme that is compatible with the JKay Deluxe Settings that I have right? Its that all?
If I were to get bootloop, will I be able to easily go to Recovery mode?
Thanks in advance.
wani08 said:
Hi Danny. If I were to change the theme, I should get the theme that is compatible with the JKay Deluxe Settings that I have right? Its that all?
If I were to get bootloop, will I be able to easily go to Recovery mode?
Thanks in advance.
Click to expand...
Click to collapse
To fully use the customization that jkay provide you should flash jkay compatible themes like this one, this is my favourite... http://forum.xda-developers.com/showthread.php?t=2165980.
Yeah, just hold volume up, menu and turn off key at the same time, and it will reboot in to recovery

[Q] insufficient storage Space Solution Please

I had a problem with my grand quattro.
It saying insufficient storage for updating the Facebook app.
But i have almost 2.1Gb space in my phone.
This is my first update after rooting my phone .
And Please help me in improving my phone's performance .
Am new to this rooting thing and the rom
Ransmith said:
I had a problem with my grand quattro.
It saying insufficient storage for updating the Facebook app.
But i have almost 2.1Gb space in my phone.
This is my first update after rooting my phone .
And Please help me in improving my phone's performance .
Am new to this rooting thing and the rom
Click to expand...
Click to collapse
Well that's wierd... Try restarting your phone and install again...
And to improve your phone's performance, you can install Triprex's Kernel http://forum.xda-developers.com/showthread.php?t=2654038 .You can also try Custom Roms(I would recommend TransWin s5 v2 Rom).. But to install all these, you need to have Clockworkmod installed in your phone... Refer this link to install ClockworkMod on your phone http://forum.xda-developers.com/showthread.php?t=2669806
Note that Clockworkmod is very essential to install all these roms and kernels.. For more info, you can browse through various threads and also pm me
Shrukul said:
Well that's wierd... Try restarting your phone and install again...
And to improve your phone's performance, you can install Triprex's Kernel http://forum.xda-developers.com/showthread.php?t=2654038 .You can also try Custom Roms(I would recommend TransWin s5 v2 Rom).. But to install all these, you need to have Clockworkmod installed in your phone... Refer this link to install ClockworkMod on your phone http://forum.xda-developers.com/showthread.php?t=2669806
Note that Clockworkmod is very essential to install all these roms and kernels.. For more info, you can browse through various threads and also pm me
Click to expand...
Click to collapse
Thank you replying.
I already have clockworkmod on my phone.
Does this kernel version change my phone's android version look?
Ransmith said:
Thank you replying.
I already have clockworkmod on my phone.
Does this kernel version change my phone's android version look?
Click to expand...
Click to collapse
kernel act as interface b/w software and hardware so it does not have any connection to visiual change. so no kernel version will not change your phone's android version look
Ransmith said:
Thank you replying.
I already have clockworkmod on my phone.
Does this kernel version change my phone's android version look?
Click to expand...
Click to collapse
'change my phone's android version look' -> By that you mean 4.1.2 changing to 4.2.2 in your settings something like dat??
If thats what you meant, then NO it does not change.. but the kernel version in your settings does change....
Anyway, were u succesfull in installing facebook app??
Shrukul said:
'change my phone's android version look' -> By that you mean 4.1.2 changing to 4.2.2 in your settings something like dat??
If thats what you meant, then NO it does not change.. but the kernel version in your settings does change....
Anyway, were u succesfull in installing facebook app??
Click to expand...
Click to collapse
NO..Not yet .
Now am trying to remove the Clockworkmod recovery.and to get the official recovery thing.
solved
Ransmith said:
I had a problem with my grand quattro.
It saying insufficient storage for updating the Facebook app.
But i have almost 2.1Gb space in my phone.
This is my first update after rooting my phone .
And Please help me in improving my phone's performance .
Am new to this rooting thing and the rom
Click to expand...
Click to collapse
go here to fix ur problem : http://forum.xda-developers.com/showthread.php?t=2694877
don t forgot to thank me :highfive:
hit thanks button :good:

[fixed] Does anyone know how to fix camera prolem in s5 sensation rom v4.2?(GT-I9300)

Yesterday I flashed S5 Sensation ROM on my s3. First I installed version 4.0 and i didn´t chose the s5 themed one on aroma installer. After the installation, I installed version 4.2, everything works fine except for the camera. please could someone give me the solution to this bug? (There is a screenshot in attachments.) Thanks for replying.
flynn1411 said:
Yesterday I flashed S5 Sensation ROM on my s3. First I installed version 4.0 and i didn´t chose the s5 themed one on aroma installer. After the installation, I installed version 4.2, everything works fine except for the camera. please could someone give me the solution to this bug? (There is a screenshot in attachments.) Thanks for replying.
Click to expand...
Click to collapse
Don't flash a custom kernel before using the camera.
Exactly. On custom kernels, you must always open the camera first with the stock kernel. Then flash the custom kernel, the camera will keep working.
But remember after a factory reset the camera will fail again so you will need to flash stock kernel again.
In this case, you don't need to erase anything. Just flash the stock kernel and the camera will work, then flash the custom kernel again.
dabyd64 said:
Exactly. On custom kernels, you must always open the camera first with the stock kernel. Then flash the custom kernel, the camera will keep working.
But remember after a factory reset the camera will fail again so you will need to flash stock kernel again.
In this case, you don't need to erase anything. Just flash the stock kernel and the camera will work, then flash the custom kernel again.
Click to expand...
Click to collapse
Well, I did it this morning, and the stock camera still worked. When I flashed the custom one, only the frontal camera worked; but the back camera did not. So I´m still with camera bugs.
Try flashing the stock kernel, then doing a factory reset.
dabyd64 said:
Try flashing the stock kernel, then doing a factory reset.
Click to expand...
Click to collapse
Thanks for that solution, I will try to do it. i will notify you if it did not worked.
[FIXED] Best Way to fix camera failed problem in s5 sensation rom for galaxy s3
1. First way you should factory reset your phone
2. Install S5 sensation rom again,
3. Then when you saw the setup like " Select what apps you want to remove "
4. On that setup select [ REMOVE CAMERA]
5. Continue the steps till the end
6. When your boots as S5 sensation rom
7. You'll see no camera app
8. Download [ GOOGLE CAMERA ] or any other camera from google play!
PLEASE DON'T INSTALL S5 SENSATION ROM FOR ANY OTHER DEVICE.
ITS ONLY FOR S3
Camera Fix For Sensation rom SIII
Hello,
First you have installed your rom after you can go to your twrp/cwm then go to the installed this zip is attached to the post. After installed you can check your camera.
Cybermar said:
Hello,
First you have installed your rom after you can go to your twrp/cwm then go to the installed this zip is attached to the post. After installed you can check your camera.
Click to expand...
Click to collapse
Hi... There is not anymore replay from your last... From one year a go.... So i hope you read mine...
I have the problem whit camera failure only when start a video call.... Im whit latest nightly cm13 official and latest gapps also... My phone is a s3 i9300 int. Whit twrp 3.0.2.
So i would just be sure if the zip file you posted, is for my problem too and if work for a cyanogenmod ROM... Thank's in advance e sorry for basically english.
flynn1411 said:
Yesterday I flashed S5 Sensation ROM on my s3. First I installed version 4.0 and i didn´t chose the s5 themed one on aroma installer. After the installation, I installed version 4.2, everything works fine except for the camera. please could someone give me the solution to this bug? (There is a screenshot in attachments.) Thanks for replying.
Click to expand...
Click to collapse
Try "justarchi camera" camera fix , hope it will work :good:
Hi... There is not anymore replay from your last... From one year a go.... So i hope you read mine...
I have the problem whit camera failure only when start a video call.... Im whit latest nightly cm13 official and latest gapps also... My phone is a s3 i9300 int. Whit twrp 3.0.2.
So i would just be sure if the zip file you posted, is for my problem too and if work for a cyanogenmod ROM... Thank's in advance e sorry for basically english
Zuritonic said:
Hi... There is not anymore replay from your last... From one year a go.... So i hope you read mine...
I have the problem whit camera failure only when start a video call.... Im whit latest nightly cm13 official and latest gapps also... My phone is a s3 i9300 int. Whit twrp 3.0.2.
So i would just be sure if the zip file you posted, is for my problem too and if work for a cyanogenmod ROM... Thank's in advance e sorry for basically english.
Click to expand...
Click to collapse
Hello Dear,
Which software are you using for Video call ...
Cybermar said:
Hello Dear,
Which software are you using for Video call ...
Click to expand...
Click to collapse
This help me to find your problem and i will fix it soon as possible. ...for you...

[ROM] Princess Ozma(4.4.2 kitkat),for the Galaxy Note II

support E250X, GT-N7105
today, I am so glad to share ozma update.
to tell the truth, I had updatated already. but I only shared in korea forum(V4).
but, some user want to share.
this is version5
what is different? what is unique?
I am not familiar with english. so, I just write very briefly
1. autocall recording
2. control data connection dialog
3. 7 style systemUI
4. 4 sytle launcher (almost widget resizable)
5. 2 style dialer
7. 4 style volume boost
8. Aroma Installer
9. Including Camera Driver
11. beautiful wallpaper
12. reduce ram usage, up speed
13. music visualizer in systemui
14. more and more.
How To Install
1. Back up
2. Flashing Install File (Aroma Installer including E250X, GT-N7105)
3. Follow Installer Direction
4. for Wifi. Install Agani(N7105), Wizard Kernel(E250X)
5. Done
* E250L mode => use device choice step (number 3)
Thank you
ROM DOWNLOAD
1. Mega
Useful MOD update 12.15. 2015
4. dmb (zip flashing)
. dmb is tv mod, but It is possible only where the country support
. ported from note4
DOWNLOAD
6. Skt,Ktf,Skt Incall Change for korean
. only for korea operator(skt,lgt,ktf) user. pls international users do not use it
. you can use stock Incall instead of default Incall. If you want restore, again flash.
. if you have some problem(ARS), use this.
[DOWNLOAD]
Thank you
나의 Nexus 5X 의 Tapatalk에서 보냄
oH cool a new rom to try.. thanks
R0B3RTF1SH3R said:
oH cool a new rom to try.. thanks
Click to expand...
Click to collapse
thanks for trying. I hope your result.
Thanks for new rom! Good work.
charlykwon said:
Thanks for new rom! Good work.
Click to expand...
Click to collapse
Hi, what is "DMB" ?
Loffeboy said:
Hi, what is "DMB" ?
Click to expand...
Click to collapse
Hi. Dmb is tv.
Some device support tv instead of radio
Thank u
Video call
Hi mate, i can not get the video call to work, any tip ?
Loffeboy said:
Hi mate, i can not get the video call to work, any tip ?
Click to expand...
Click to collapse
hi. mate.
1 just tell me your stock rom link.
or send me stock rom via email. [email protected]
I will check some files. and I will give you some patch via pm.
and
2 you can try like this.
replace all system/csc files via stock rom.
video call related inside csc.
feature.xml , other.xml, customer.xml ,sales.dat...contents.db..
thank you.
Stock rom
rasido said:
hi. mate.
1 just tell me your stock rom link.
or send me stock rom via email. [email protected]
I will check some files. and I will give you some patch via pm.
and
2 you can try like this.
replace all system/csc files via stock rom.
video call related inside csc.
feature.xml , other.xml, customer.xml ,sales.dat...contents.db..
thank you.
Click to expand...
Click to collapse
Hi, is stock rom the rom that came with the phone when it was new ? The last stock rom for my gt-i9505 is
android v.5.0.1 LL, it was KK from the beginning.
Loffeboy said:
Hi, is stock rom the rom that came with the phone when it was new ? The last stock rom for my gt-i9505 is
android v.5.0.1 LL, it was KK from the beginning.
Click to expand...
Click to collapse
sorry. I don't understand what you say exactly.
stock rom means samsung latest 4.4.2 kitkat rom released in your country.
GT-N7105's files depends on their country, carrier.
though GT-N7105 rom name is same, a few files different.
anyway your phone is i9505 gallaxy s4?
thanks
rasido said:
sorry. I don't understand what you say exactly.
stock rom means samsung latest 4.4.2 kitkat rom released in your country.
GT-N7105's files depends on their country, carrier.
though GT-N7105 rom name is same, a few files different.
anyway your phone is i9505 gallaxy s4?
thanks
Click to expand...
Click to collapse
Yes, it is an i9505 galaxy s4, i bought it with android V.5.0.1 and that was an upgrade from KK 4.4.x i think...
I live in Sweden and has Telia as my carrier, but i do not know if it is an international version or an Nordic version.
Hi I think thats international version. You better ask galaxy s4 form. Nice day.
---------- Post added at 09:25 AM ---------- Previous post was at 08:56 AM ----------
Hi friend. Is there any compatible kernel for this rom, except widzard kernel? My model is e250s..
charlykwon said:
Hi I think thats international version. You better ask galaxy s4 form. Nice day.
---------- Post added at 09:25 AM ---------- Previous post was at 08:56 AM ----------
Hi friend. Is there any compatible kernel for this rom, except widzard kernel? My model is e250s..
Click to expand...
Click to collapse
No. Only widzard kernel. And maybe stock kernal also ok
Hi Dev,
Thank you for cooking us a new ROM to check out and hopefully enjoy.
I have an N7105 and I'm interested in testing this ROM. Is this the correct order of installation:
1. Install ROM
2. Install N7105 Addon
3. Install Modem + CSC from my service provider.
For example for me; I will Install the Telstra Modem + CSC files available in the Modem Thread here in this subsection.
4. Install latest AGni (Stock) Kernal.
I will most likely wait until the ROM is finished... For example like you suggested. Removing S-Finder and QConnect, that would be great.
Or if you can please make an AROMA Setup where we can choose for example:
- The Addons for which device we're using.
- 240 DPI or 320 DPI (this would be a great edition, but you have to fix phone, calculator, and a lot of samsung stock apps to 320dpi). Maybe make a note that says 240 DPI mode comes installed with Xposed Framework and App Settings to fix all necessary applications.
- Clean Dark Themed Framework + System UI (Black, White, Grey, and Red) vs Samsung Framework & System UI.
- No Mods vs Project Skynet Mod installed + terminal emulator
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
:good::good::good:
Of course you don't have to do any of this, but just a few requests :angel:
Thank you again for your hard work. I and I'm sure many others, truly appreciate devs (such as yourself, and others) who are keeping this device alive for us.
Blackfyre said:
Hi Dev,
Thank you for cooking us a new ROM to check out and hopefully enjoy.
I have an N7105 and I'm interested in testing this ROM. Is this the correct order of installation:
1. Install ROM
2. Install N7105 Addon
3. Install Modem + CSC from my service provider.
For example for me; I will Install the Telstra Modem + CSC files available in the Modem Thread here in this subsection.
4. Install latest AGni (Stock) Kernal.
I will most likely wait until the ROM is finished... For example like you suggested. Removing S-Finder and QConnect, that would be great.
Or if you can please make an AROMA Setup where we can choose for example:
- The Addons for which device we're using.
- 240 DPI or 320 DPI (this would be a great edition, but you have to fix phone, calculator, and a lot of samsung stock apps to 320dpi). Maybe make a note that says 240 DPI mode comes installed with Xposed Framework and App Settings to fix all necessary applications.
- Clean Dark Themed Framework + System UI (Black, White, Grey, and Red) vs Samsung Framework & System UI.
- No Mods vs Project Skynet Mod installed + terminal emulator
http://forum.xda-developers.com/android/software-hacking/android-l-booster-1-soon-t3030796
:good::good::good:
Of course you don't have to do any of this, but just a few requests :angel:
Thank you again for your hard work. I and I'm sure many others, truly appreciate devs (such as yourself, and others) who are keeping this device alive for us.
Click to expand...
Click to collapse
sincerely thank you for the Qualitative feedback
your install process is useful for N7105 users.
If you use your csc, only problem is airmessage(circle instant message).
we append some feature text to use airmessage in csc(others.xml or feature.xml)
I will add this text in OP
4.4.4 based rom has some problems.
bluetooth/video call/volte etc.
so I used 4.4.2 kitkat. I am very curious about N7105 video call
Is it work?
I will consider your comments
yes. It will takes a lot of time to make 240dpi mod.
later, If I have some time, I will try.
more system ui will be added in this week.(aroma..OK I accept)
have a nice day. good mate
Hi friend. First thanks for make nice rom for note 2. I already use ur rom since first you posting. Really smooth and no any lag..only battery time not so much good. I tried wadzard2.4, 2.6v.. 2.4v little bit ok than 2.6v. I didnt install any app..so whats good improve battery life?
charlykwon said:
Hi friend. First thanks for make nice rom for note 2. I already use ur rom since first you posting. Really smooth and no any lag..only battery time not so much good. I tried wadzard2.4, 2.6v.. 2.4v little bit ok than 2.6v. I didnt install any app..so whats good improve battery life?
Click to expand...
Click to collapse
I used widzard 2.4 version.
1.
find (system/app) but if remove qconnect, systemui is not pretty. so I will upload different systemui removed quick,sfinder)
2.
if don't use carrier related wifi service, also you can remove some apks. libs but It is not easy.
later, I will post, or support remove script.
3.
now cpu maxcore is 1600Mz. you can downsize 1600->1200Mz. it is useful. speed?(almost same. but battery time is good)
thank you.
Thanks for quick reply..i will adjust cpu clock...thank again.

Categories

Resources