Related
Has anyone come across a cigarette lighter mount for the GSM TP2 that will also charge the device? It has to be for the GSM version as the CDMA ones have their usb port mounted slightly to the left of center where the GSM versions are mounted.
I found two different ones so far. One is a universal one made by Arkon and seems to be less sturdy than it should be. It has a pass-through 12v port to plug in a charger to it. It only concerns me that the way it is made, it seems to not be sturdy enough based on the reviews.
The other one is made by iGrip and is pretty nice. It is made for the TP2, but it has no power option at all. If this would have a charging port on it, it would be perfect.
Anyone else seen any other options?
here in the netherlands you can buy them and they support paypal if im correct
http://www.mytrendyphone.nl/shop/htc-touch-pro2-54906c1.html
shatred said:
here in the netherlands you can buy them and they support paypal if im correct
http://www.mytrendyphone.nl/shop/htc-touch-pro2-54906c1.html
Click to expand...
Click to collapse
Sorry, but I didn't see any mount for the Rhodium on the linked page. Thanks anyway.
cajunflavoredbob said:
.
Anyone else seen any other options?
Click to expand...
Click to collapse
I use this: http://www.bracketron.com/products/universal-usb-power-dock
I got it from Radio Shack with a 1 year warranty just in case. I did have it break on me but that's because I wasn't using it right. I was within the 30 day return period so i returned it an got a new one. If you do get it make sure you press the red button when adjusting the angle. I would still recommend ti since it has everything I was looking for. I doubt you'll be able to have the keyboard open, but why would you need it open while driving?
howhi50 said:
I use this: http://www.bracketron.com/products/universal-usb-power-dock
I got it from Radio Shack with a 1 year warranty just in case. I did have it break on me but that's because I wasn't using it right. I was within the 30 day return period so i returned it an got a new one. If you do get it make sure you press the red button when adjusting the angle. I would still recommend ti since it has everything I was looking for. I doubt you'll be able to have the keyboard open, but why would you need it open while driving?
Click to expand...
Click to collapse
I'm still searching for something similar. I like that one, I'm just worried about having the charging cable hanging out of it. The plug only needs to be a standard USB plug. I would imagine there would be another phone or device that would require something of this sort. Also, I don't need the keyboard open while using this.
cajunflavoredbob said:
I'm still searching for something similar. I like that one, I'm just worried about having the charging cable hanging out of it. The plug only needs to be a standard USB plug. I would imagine there would be another phone or device that would require something of this sort. Also, I don't need the keyboard open while using this.
Click to expand...
Click to collapse
Yea that's what I initially wanted when I set out my search but ended up settling for this. My apologizes on accusing you of wanting to use the keyboard while driving. After re-reading your op I didn't see that mentioned like I thought I did before. For charging my phone I use one of these pretty good quality and it comes with a micro usb adapter which i liked since a lot of newer phones are using this. Best wishes on your search!!
howhi50 said:
Yea that's what I initially wanted when I set out my search but ended up settling for this. My apologizes on accusing you of wanting to use the keyboard while driving. After re-reading your op I didn't see that mentioned like I thought I did before. For charging my phone I use one of these pretty good quality and it comes with a micro usb adapter which i liked since a lot of newer phones are using this. Best wishes on your search!!
Click to expand...
Click to collapse
Hmmmm..... That combined with the universal mount you posted might actually work nicely. I was concerned about my current HTC car charger as it has a rather long cord. This would likely eliminate that mess. I'll give it a shot. Thanks.
Anyone know where I could find a short miniUSB to USB cable. Something like 2" or so would be fine. This might be able to complete the homebrew mount I'm working on.
Short USB Cable
Amazon.com has a 1ft cable (can't post links yet) and 3 ft cables, although I haven't seen any 2ft cables. If you need 2ft you could pick up a gender changer (also available on amazon) and link two 1ft cables together.
kastg1 said:
Amazon.com has a 1ft cable (can't post links yet) and 3 ft cables, although I haven't seen any 2ft cables. If you need 2ft you could pick up a gender changer (also available on amazon) and link two 1ft cables together.
Click to expand...
Click to collapse
That's a 2" (inch) cable I am looking for. Thanks anyway, though. I'm hoping I won't have to make one. Making USB cables is not fun.
Thread for hardware mods
POSTING INTERNAL tf101 pictures
like 3g dongle ? internal sd cards? ssd?
removing the battery for 2 HDD 500go?
finding sd cards hubs? usb to sata cables?
? there is a place in the tablet for a 3g dongle?
there are 2 screws under the upper rubbers and the dock open easy
there is a lot of spaces avaible
My MIFI might actually fit in there, all I would need to do is supply it power somehow.
I'm no hardware engineer though, but if thats possible it would save you from the driver issues with a 3g dongle.
I wonder if it would be possible to check which pins from the adapter connect to USB - so we can make DIY USB adapter for those without a dock.
hmm adding an hdd would be very interesting, sata won't be very hard, powersupply will be.
Sent from my O2x with CM7
This is what I was looking for, looking to do some mods to the dock.
Thanks Markolino72.
Internally mount and wire a 32gb memory stick to the USB port so you get a 32gb hard drive added whenever you dock It might even have enough room for a portable USB hub so you don't lose use of the external usb port?
does anybody think it will be easy to make a DIY dock fix for those with battery draining issues like me?
It seems like it would be relatively easy - just make a switch to either connect or disconnect the cords coming from the docking point.
Or even better, maybe if you put the correct microcontroller in there you can have it switch the pins to floating, if it senses that there is no tablet connected (not sure about the details though)...
ydnality said:
does anybody think it will be easy to make a DIY dock fix for those with battery draining issues like me?
It seems like it would be relatively easy - just make a switch to either connect or disconnect the cords coming from the docking point.
Or even better, maybe if you put the correct microcontroller in there you can have it switch the pins to floating, if it senses that there is no tablet connected (not sure about the details though)...
Click to expand...
Click to collapse
Have you seen the post in the General forum (2nd page now I think)? Posted by Asus_USA themselves, if you prove the 6 steps that your dock has the issue you can get a new one! I really do hope that I can get mine exchanged, waiting on a reply from my local service center..
Regards.
In regards to the hardware mods, that really looks amazing. Would love to put in my mifi there as well, attach it via USB to charge = your own 3g model Maybe a little modding you could get the mifi to power on only when the dock is connected (remove the battery of the mifi?) so that when it powers on it'll power on the mifi as well. Only a few thoughts.
Maybe a little modding you could get the mifi to power on only when the dock is connected (remove the battery of the mifi?) so that when it powers on it'll power on the mifi as well.
Click to expand...
Click to collapse
it's a good thought but the mifi I have (novatel 2200) wont work without the battery, for some reason if the battery is bad or removed you cannot run usb, it must be the way they have the power run through the battery or charging. Not sure if all are like this or not.
andrewklau said:
Have you seen the post in the General forum (2nd page now I think)? Posted by Asus_USA themselves, if you prove the 6 steps that your dock has the issue you can get a new one! I really do hope that I can get mine exchanged, waiting on a reply from my local service center..
Click to expand...
Click to collapse
I talked to the Asus service rep about it. They currently won't give you a new one since they have a hardware upgrade to fix it. If you wanted a new one you needed to do before they solved the problem. I'm waiting on the upgrade part to be delivered for for mine. Should in a few days.
A switch should theoretically work. The guy at the service center said the replace something that goes into the hinge of the dock. Looking at the teardown pics, you can see a wire goes into each side of the hinge, so I think they replace the wires and maybe make a new connection somewhere on the dock.
Surprising how much wasted space there seems to be in the dock -- it's nowhere near as tightly packaged as the tablet itself. Looks like Asus can optimize the size or fit some more features in future versions, if they want...
Let me see if I am thinking correctly...Your saying using something like mifi installed via USB wires (will it be always on?) then connect via WiFi on your transformer? So basically your putting the mifi in a case that can never be opened without a screwdriver? I guess one would always have access for your other devices as well as long as the TF is in the vicinity.
P.S. I think I think this is a good idea, not decided though. I like to think of it in a real world application.
there is another post with a guy putting in an SSD, but it bulges at the keyboard. A 32g SD card would be nice.
Sent from my Transformer TF101 using XDA Premium App
typci said:
I talked to the Asus service rep about it. They currently won't give you a new one since they have a hardware upgrade to fix it. If you wanted a new one you needed to do before they solved the problem. I'm waiting on the upgrade part to be delivered for for mine. Should in a few days.
A switch should theoretically work. The guy at the service center said the replace something that goes into the hinge of the dock. Looking at the teardown pics, you can see a wire goes into each side of the hinge, so I think they replace the wires and maybe make a new connection somewhere on the dock.
Click to expand...
Click to collapse
You are getting the replacement part? bought mine on the US, but live in chile... would really like to somehow get the part that needs to be replaced and do it myself
tanguita said:
You are getting the replacement part? bought mine on the US, but live in chile... would really like to somehow get the part that needs to be replaced and do it myself
Click to expand...
Click to collapse
There's very little chance they'll give anybody the part, and nothing in the previous person's post suggested they're doing so for him.
Talk to Asus Chile and get it serviced by them:
http://www.asuschile.cl/
http://latin.asus.com/Static_WebPage/Service_center_chile/
knoxploration said:
There's very little chance they'll give anybody the part, and nothing in the previous person's post suggested they're doing so for him.
Talk to Asus Chile and get it serviced by them:
http://www.asuschile.cl/
http://latin.asus.com/Static_WebPage/Service_center_chile/
Click to expand...
Click to collapse
Well I ended up calling them. I would have to ship the dock to "someone" in the US, have them ship it to the repair center, fix it, ship it back and then ask that "someone" to ship it back to me... sooo, I'm basically screwed... I ended up with a nice 150US paperweight (not even considering the horrible light bleed on the transformer).
tanguita said:
Well I ended up calling them. I would have to ship the dock to "someone" in the US, have them ship it to the repair center, fix it, ship it back and then ask that "someone" to ship it back to me... sooo, I'm basically screwed... I ended up with a nice 150US paperweight (not even considering the horrible light bleed on the transformer).
Click to expand...
Click to collapse
Yeah, actually, I hadn't realized that but it does say it clearly on the product warranty page:
"Brazil and South American countries don’t support global service"
http://support.asus.com/warranty.aspx?SLanguage=en&p=20&s=16&m=Eee Pad Transformer TF101
took mine apart also and there is quite a bit of room.
i plan on putting a 128gb usb flash drive inside the dock and soldering onto the usb connections once i get all the bits in.
Any bigger pictures? Are the screws under the rubber feet?
just two screws under the rubber feet near the hinge then it just pulls apart from the top
had to take mine apart as the spring/clip mechanism for the sd card wouldnt lock the card in.
now the card is stuck in with no nails haha a simple fix.
This is good news. I hacked a Crystal HD decoder card (pcie), USB wifi dongle, a logitech nano receiver, and a 4 port micro usb hub (from a touch screen setup) into a Dell mini 9 and there was absolutely no room compared to this.
They even have covers for the USB ports, so if you remove a header and solder wires up you just have to hot glue / epoxy that cover from the back and you are money. Looks clean and stock.
I have an old 64 GB thumbdrive that might find a new home. Maybe a 1.8" usb HDD would fit in there with the battery, without the battery who knows.
Just wondering has anyone tried/thought about the feasibility of modding a Palm Pre touchstone charger for use in an atrix? would it be extremely difficult to do so?
thantos said:
Just wondering has anyone tried/thought about the feasibility of modding a Palm Pre touchstone charger for use in an atrix? would it be extremely difficult to do so?
Click to expand...
Click to collapse
As per post on engadget it's not so complicated
thantos said:
Just wondering has anyone tried/thought about the feasibility of modding a Palm Pre touchstone charger for use in an atrix? would it be extremely difficult to do so?
Click to expand...
Click to collapse
xboxexpert posted a tutorial for this on a nook color here . Looks easy enough and the same method should apply.
Hmmm.. interesting.. only wished someone would have tried previously to know if it'd fit inside the battery cover...
After looking at the iFixIt teardown for the Atrix I'm not thinking this would be a straight forward process.
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/2
Boards aren't my strong point but it looks as though the +/- may be under the usb connector housing.
mtnecho said:
After looking at the iFixIt teardown for the Atrix I'm not thinking this would be a straight forward process.
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/2
Boards aren't my strong point but it looks as though the +/- may be under the usb connector housing.
Click to expand...
Click to collapse
Need a better shot, but it looks like you can still hit the resistor between the two ground posts. Going to need some thin wire though.
I am curious to know if anyone will attempt this.
vmiku914 said:
I am curious to know if anyone will attempt this.
Click to expand...
Click to collapse
Don't think I'm going to sacrifice my Atrix to the hardware mod gods. Enjoying it too much and not terribly interested in dropping the money to replace it if it doesn't work out.
I don't know if I will be doing the mod, but these are some of the tips I would follow if i decided to. If I do it I'll post pictures..
1st:
Be sure to use the Palm Pixi's back cover with the smaller circuit board - this one.
Click to expand...
Click to collapse
2nd:
You might wanna consider buying this case since its thicker and you can dig a little bit if the circuit doesn't fit the standard battery door.
Click to expand...
Click to collapse
3rd:
In many phones the metal that keeps the memory card in place is the ground (-).
Click to expand...
Click to collapse
4th:
I'm sure there's an easy (+) pin you can solder to - so far i haven't found one, but many people cut a usb plug to fit inside the usb female socket and route the cables somehow (Watch the first video below). You have to remove the cut usb in order to use it with computer, also its quite ugly. The best, but very hard way is to solder the (+) wire directly to where the usb socket is soldered to the phone's circuit board .This I'll leave to a jewelry craftsman, I know, with lots of experience. MAKE SHURE YOU KNOW WHICH PIN IS THE POSITIVE!!! For polarity of the palm pixi's circuit boat refer to the first picture.
Click to expand...
Click to collapse
I know its a bit difficult, but... that's the way it is.
Useful links:
Galaxy S Mod.
First HD2 Mod.
Same mod but with extended battery (Not good looking)
You have probably seen this.
A lot of people forget to do this.
YOU ARE WELCOME!!!
I bought some of the pixi components and will try this out without the requirement of soldering.. I've been thinking.. is there any way to use the leads from the battery as the connection point as opposed to soldering directly to the port? Or is there a voltage regulator that I'd have to go through first...
First, you should try if it's really charging Atrix (batt's percentage going up), because it needs more current than standart phone.
But i'm thinking of modyfing my own, but with less invasive method
I wouldn't take apart my atrix again. I may have killed my first one getting my screen out. Those ribbon cables are a pain, and well, you might not need to remove the flex cables (the black flat ones), but if you do, you are most times pulling up the temp sensor too, and that thing never goes back!!
Just make sure you are good at what you do
Why not solder the the inductive piece to a chunk of mini usb cable first ? Completely non invasive and you'll be able to prove it works before you solder to the phone.
That was what I was considering. Unfortunate that the variances for the attrix are so tight.
mobileweasel said:
Why not solder the the inductive piece to a chunk of mini usb cable first ? Completely non invasive and you'll be able to prove it works before you solder to the phone.
Click to expand...
Click to collapse
If you're going to do that, you may as well just buy one that's already made.
I meant to do that as proof of concept. If it charger, take it apart and hide it under the battery cover.
Does anyone tried the Palm inductive charger with Atrix? Does it really work?
I just got mine in - will try it soon.
Let me ask you guys this...
1) Whats the point of all this?
Really? What is the point? The cool form factor? Bragging rights? It seems like
a big inconvenience for me, especially when you will need to take your charger somewhere.
Anyways, seems like a lot of work for just the convenience of not plugging in a mini usb cable.
Anyways, good luck and I hope you guys have fun
Perhaps you are right about it.
But whats the point in buying a lapdock or media dock when you can just get a laptop? What's the point in rooting or unlocking your phone? You could easily just leave it stock and most of the functions will work just fine.
Call it a hobby or challenge or a convenience or whatever. I made this thread merely asking for technical help. Not snide commentary that is counter productive.
picked up a laptop dock without charger. What are the charger specs/ replacement? Is there a compatible generic charger available.
?
You can use one similar to the IPhone USB/AC adapter. Been using it at work and no problems. Basically any Micro USB/AC charger will work. But stay away from the AT&T adapter. I bought it and when my phone is plugged into that adapter, the touch screen is sketchy, ie acts flaky and buzzes around my head and stuff.
dratsablive said:
You can use one similar to the IPhone USB/AC adapter. Been using it at work and no problems. Basically any Micro USB/AC charger will work. But stay away from the AT&T adapter. I bought it and when my phone is plugged into that adapter, the touch screen is sketchy, ie acts flaky and buzzes around my head and stuff.
Click to expand...
Click to collapse
for the laptop dock? I think its more of a power brick adapter design, right?
You are right, didn't correctly read the original post. Ignore my suggestion.
Here you are.
I know radio shack has versatile AC transformers with interchangeable heads. Ask and they can probably assist you. Good luck,
-omni
(In case that turned out unreadable)
thanks. Motorola said they are sending me a replacement.
Can you share some info...
A.VOID said:
thanks. Motorola said they are sending me a replacement.
Click to expand...
Click to collapse
Hey can you tell me what number you called and how much they are charging for one? I have the same thing bought the dock but missing the power cord and Im having trouble finding one. Thanks..:good:
Nevermind
Nevermind . i went to the Motorola web site used their chat and they are sending me a free adapter as a one time courtesy. Thanks for the info.:good:
After a good long while my X2's microSD port stopped working. So now I can't charge it, or connect it to my computer. I took it to a Verizon Wireless store and they confirmed that the port looks fine, but doesn't work. They had me a replacement shipped. I have the one they just sent me working fine, but I have to return my old one. The old one with the messed up port has Eclipse v2.3 on it, and I don't know how to get it back to a stock ROM without being able to connect it to my computer. It says in the shipping paperwork that they can charge me the full retail price for several reasons, including "software alterations." I can get to the stock bootloader of course, but bootstrap requires me to be plugged in to the AC charger. Any help would be appreciated. Thanks guys.
When you say doesn't work... do you mean absolutely zilch or will it charge?
Nothing
tallyforeman said:
When you say doesn't work... do you mean absolutely zilch or will it charge?
Click to expand...
Click to collapse
I mean absolutely zilch!
Have you tried wiggling the USB plug on your cable when it's connected? Sometimes, it might be really loose. I'm assuming you and Verizon tried, especially if you took it to Verizon and they confirmed it wasn't working.
I'm also assuming you've tried different cables just in case? I do know that if you don't use a cable that was made specifically for the X2, it might not have enough power to charge. I have noticed that with my RAZR (and my X2 before that), using USB cables and chargers that were NOT specific to the RAZR/X2 worked fine for a while and then they wouldn't work or worked sporadically. I would have to wiggle the cable to make it "register" but one slight movement would then cause the phone to say it was disconnected from the charger.
But, if I used the car charger or charging cable that came with my RAZR/X2, it worked fine.
I know some people have also tried bending in the outside part of the USB port more towards the inside so that it results in a tighter fit for the USB connector on your cable and that has worked. But, you definitely want to be careful if you're returning it.
Otherwise, it's probably something on the actual circuit board inside where the port has broken away from the logic board and is no longer registering to the phone when something is connected. At that point, I think you're done.
Thanks for the Ideas
iBolski said:
Have you tried wiggling the USB plug on your cable when it's connected? Sometimes, it might be really loose. I'm assuming you and Verizon tried, especially if you took it to Verizon and they confirmed it wasn't working.
I'm also assuming you've tried different cables just in case? I do know that if you don't use a cable that was made specifically for the X2, it might not have enough power to charge. I have noticed that with my RAZR (and my X2 before that), using USB cables and chargers that were NOT specific to the RAZR/X2 worked fine for a while and then they wouldn't work or worked sporadically. I would have to wiggle the cable to make it "register" but one slight movement would then cause the phone to say it was disconnected from the charger.
But, if I used the car charger or charging cable that came with my RAZR/X2, it worked fine.
I know some people have also tried bending in the outside part of the USB port more towards the inside so that it results in a tighter fit for the USB connector on your cable and that has worked. But, you definitely want to be careful if you're returning it.
Otherwise, it's probably something on the actual circuit board inside where the port has broken away from the logic board and is no longer registering to the phone when something is connected. At that point, I think you're done.
Click to expand...
Click to collapse
Thanks for the ideas, but I already tried all of those with no luck. There was about two days where I could still charge it with some manipulation of the connection, but no more.
What about a different battery, tried a ifferent one?? If the battery is shot, that can create a headache in its own world.
Battery's Good
tallyforeman said:
What about a different battery, tried a ifferent one?? If the battery is shot, that can create a headache in its own world.
Click to expand...
Click to collapse
Nope, the battery is fine. It's working well in replacement phone.