Hey guys, today I dropped my HOX+ (International), not for the first time, but this time the glass shattered.
Ofcourse I don't want to spend buckets for some professionals, I will try to do it on my own.
Only the glass broke, touch is still fine. Only thing I noticed are 2 little holes in the glass where
the colors seem a little bit orange. Now my questions are:
1.Is it possible to only swap the digitizer (glass) or is it too hard glued together with the LCD panel?
2.Are the orange spots (you can barely see them) a problem or the LCD panel or will they
be fixed with a new digitizer?
3.Which HOX models have the same screen as the X+, I heard the international HOX has the same,
is that true?
4.Are the LEDs of the HOX+ menu buttons red or is it just the digitizer? White buttons would look great, too.
5.Do I really need replacementkits for like 60 euro with tools and all that stuff or can I do it with my own tools
at home? My father is not a professional but he already fixed all kinds of electronic things, I got his help.
6.If replacing only the digitizer is possible should I do it or would u recommend to replace the whole screen,
that would also prevent dust in the screen.
7.In many videos they didn't shut down the phone so they could test whether it worked, is that recommended or can I break smth?
That's all I had to ask, tell me which mistakes you did or some tips etc.
Hope I get some fast responses, so I know which things to order, thanks in advance
Tazmaniiac said:
Hey guys, today I dropped my HOX+ (International), not for the first time, but this time the glass shattered.
Ofcourse I don't want to spend buckets for some professionals, I will try to do it on my own.
Only the glass broke, touch is still fine. Only thing I noticed are 2 little holes in the glass where
the colors seem a little bit orange. Now my questions are:
1.Is it possible to only swap the digitizer (glass) or is it too hard glued together with the LCD panel?
2.Are the orange spots (you can barely see them) a problem or the LCD panel or will they
be fixed with a new digitizer?
3.Which HOX models have the same screen as the X+, I heard the international HOX has the same,
is that true?
4.Are the LEDs of the HOX+ menu buttons red or is it just the digitizer? White buttons would look great, too.
5.Do I really need replacementkits for like 60 euro with tools and all that stuff or can I do it with my own tools
at home? My father is not a professional but he already fixed all kinds of electronic things, I got his help.
6.If replacing only the digitizer is possible should I do it or would u recommend to replace the whole screen,
that would also prevent dust in the screen.
7.In many videos they didn't shut down the phone so they could test whether it worked, is that recommended or can I break smth?
That's all I had to ask, tell me which mistakes you did or some tips etc.
Hope I get some fast responses, so I know which things to order, thanks in advance
Click to expand...
Click to collapse
first of all sorry for the screen.
1 . you can't change the glass only because its one part at all. like the glass,touch panel and the LCD are the same piece its too hard to separate them unless you have a IR Oven. so try the whole screen replacement. the international HOX screen is ok but the capacitive buttons will be white not red.
ps:don't try to open the chase with your own unless you know what you are doing . cuz i opened mine for like 20 times and every time i was breaking something in it. Mostly the power switch flex is real easy to be broken. good luck with that.
ps2: im suggesting you to buy the original spare of the hox+ screen and replace with that. you can do it with the box one but I'm not very sure the screen voltages are the same or compatible totally..
peace :angel:
So I am back again:
I took a new One X Plus Screen and built it in the phone..
I can turn it on, my PC detects the device, menu buttons are glowing. Now 4 problems:
-LCD is not working (digitizer works fine, I tested it with swipe to wake)
-vibrator thing is not working
-speakers not working
-menu button LEDs are glowing, but u can't see the buttons itself glow, only the LEDs are glowing
I am pretty sure that everything is plugged in how it should be done, any ideas?
Don't have a phone right now so fast help would be appreciated, thanks in advance.
Edit:
-vibrator thing is actually working, it was just blocked by something
-Menu buttons can't glow because there is something between LEDs and the screen, gonna fix that later
-speakers can't work because they are in the housing, sry for that mistake
Now the only problem left is the lcd, i am going to check again whether the lcd cable
is connected or not. If you have any ideas for other reasons why the lcd could not wok
please tell me.
Another question: under the menu buttons of my old screen were 3 transparent plastic pieces,
at first I thought it were the leds, but they are actually nothing electrical, just plastic pieces
glued on the screen. What are they for, do I have to keep them?
Related
Hello,
yesterday I installed some new games on my p4350 and let a friend play with it,
unfortunally he pushed to hard with the stylus and the screen got damaged . the screen is still working but it got a dent.
now I wanna replace the screen myself, anybody can give me instructions how to do this?
Also i wanna know if the soft layer on the top(not the screen protector) and the lcd, is one thing.
http://mikechannon.net/PDF Manuals/HTC Herald Sevice Manual.pdf
download and read that ,it will show you how to disassemble the herald and take the screen out
Replacing digitiser on Herald as opposed to Hermes
Scuse me for butting in but I have both just bought a Herald with a broken screen AND have done a few screen replacements on Wizards, Blue Angels and Hermeses.
On this Herald I had just assumed that you could basically follow the video on YouTube which shows how to replace a screen on a Hermes? I see that the PDF file is quite complicated and is designed to show you how to take off every tiny part if it has failed. The screen replacement is far easier that this, right?
Secondly, I see that you can buy the screen separately from the 'protector' which is I assume the bit with the hole in on your unit? I have to say, I had never seen these replaced separately before: Is this something special to the Herald or can you replace this digitizer separately from the screen on other units as well? If so, how on earth do you get it off the screen please? And is there a reliable way of getting one back on? (There is no reference to this in the pdf manual but the digitizers are suddenly being sold on ebay for about five bucks)
So the question is whether this is still as difficult on the Herald as threads on the Hermes suggest?
I've opened my Herald, and to reach the screen you have to disassemble the whole thing.
It's not that difficult (albeit while following the service manual, since there are a lot of tricky areas like removing the Keyboard), you just need to have patience and not rush it.
Any way to set up device after flash with no touch screen.
The digitizer or screen is not functioning, before i take it all apart as shown anybody no of a way to bypass the touchscreen setup.
before trying to change the digitizer...
(and i know this is crazy but worked for me after replacing the cable going from the screen to the board)
install a screen protector and try again!
I had the same problem after opening my Herald, and right now the screen only works if i have a screen protector on. If not then nothing happens
digitizer replacement is actually very easy.
Jeffreyr1 said:
Hello,
yesterday I installed some new games on my p4350 and let a friend play with it,
unfortunally he pushed to hard with the stylus and the screen got damaged . the screen is still working but it got a dent.
now I wanna replace the screen myself, anybody can give me instructions how to do this?
Also i wanna know if the soft layer on the top(not the screen protector) and the lcd, is one thing.
Click to expand...
Click to collapse
As I have now posted on a different thread, the digitizer replacement is actually very easy. You just slip a razor blade under the tabs and lever it off after removing that yellow tape on the back.
moullas said:
I've opened my Herald, and to reach the screen you have to disassemble the whole thing.
It's not that difficult (albeit while following the service manual, since there are a lot of tricky areas like removing the Keyboard), you just need to have patience and not rush it.
Click to expand...
Click to collapse
I agree. It was not difficult at all. I took apart and put together the phone a few times after just to develop a feel for it.
We have a tendency to get nervous about it but if you relax it becomes easier.
I have a a extra digitizer that I never used. If anyone wants it, pm me.
Good Day folks, here is the long and short of it.
Galaxy s 2 fell and the screen broke
I bought a new screen
Replaced the screen BUT two big problems occured.
1. The screen appears to have less colours than my original screen
2. NONE OF THE SOFT KEYS WORK, HOME, MENU AND BACK DO NOT WORK.
Number 2. is the big problem. Does anyone have any idea how these buttons work?
Even when I press the buttons directly with my fingers with the buttons off they still do not work.
Im baffled. Please help.
I also have attached pictures of the button area
It happened to me, I removed the screen, I replaced from beginning and it worked...
Hi Collado, do the white things behind the buttons have any electronic functionality or are those just things to make it stick?
To all future readers. I found out what the problem was. Basically,
The home, back and menu keys are all connected to a single ribbon. It appears there is a tiny piece, connected via the back key. That was torn while i was ripping off the the screen and digitizer.
See the picture attached
How much did you pay for your replacement screen and where did you get it. My digitizer is broken due to a drop. My front glass is perfect but the digitizer is completey shot. How difficult was this project?
Hi Johnboy
I cant remember the price of the digitizer offhand but make a check on ebay.. that is where i got it.
Difficulty is high as you need the minature tool set to do this effectively and a gentle touch.
However, it still appears as though the screen I bought has less colours.
Sorry to jump in and unintended hijack
I also dropped my S2 and cracked the screen, and after checking around dropped it in to the Geek Squad at CPW. Who duly replaced the screen and digitizer for £80. Only problem is the screen seems less bright and if moved off the central viewing angle the screen dims, as if it wasa standard lcd and not the orginal AMOLED screen. Does anyone know if they make lesser screens or was it fitted badly.
Any advice greatly appreciated.
DM.
I would go back with it and complain.If you dont get satisfaction then do an impression of the guy that goes into the pizza shop in "rise of the foot-soldier" film.
Sent from my GT-I9100 using xda premium
Hi there,
my girlfriend smashed her Galaxy S3 sometimes. Now it's done, the glass is broken in the upper left corner. The screen worked fine. A few days later she dropped it and dropped it again... i think she needs some wooden sticks to make a bushfire to call her friends. After some drops the screen stopped working fine. The screen turns black and if i push the upper left side a bit, the screen apears... very purple. I watched some tutorials about replacing the glass'. So i opend the galaxy s3 checked the ribboncables and after reasembling the screen won't start anymore. The softkeys doesn't apears. The phone is booting and make sounds. That means, power is there but no power for the display. I only want to now if the display is okay or not, to buy a new glass. But now i have these power problem. Somebody know how i can fix it? Or do i need a new display with digitizer? It's not cheap... a glass is much ceaper .
Zebra1234 said:
Hi there,
my girlfriend smashed her Galaxy S3 sometimes. Now it's done, the glass is broken in the upper left corner. The screen worked fine. A few days later she dropped it and dropped it again... i think she needs some wooden sticks to make a bushfire to call her friends. After some drops the screen stopped working fine. The screen turns black and if i push the upper left side a bit, the screen apears... very purple. I watched some tutorials about replacing the glass'. So i opend the galaxy s3 checked the ribboncables and after reasembling the screen won't start anymore. The softkeys doesn't apears. The phone is booting and make sounds. That means, power is there but no power for the display. I only want to now if the display is okay or not, to buy a new glass. But now i have these power problem. Somebody know how i can fix it? Or do i need a new display with digitizer? It's not cheap... a glass is much ceaper .
Click to expand...
Click to collapse
Multiple posts on the subject including a you tube video on replacing .You need to search them and decide .
Accessories may have more information .
jje
Not sure how that happened...
Thanks in advance for looking.
Ordered a screen replacement for my wife's busted S3 screen. Got it, followed directions....got the area around the headphone jack a little too warm, but continued and finished removing the screen. Once I had the screen off, I thought it would be a good idea to power it up to make sure everything was working, especially the top left corner of the screen that was closest to the over heated spot.
To my skeptical surprise everything was cool. Took a picture, looked at some higher res pictures....just to make sure everything seemed normal, to which it did. Powered down, removed the battery and the SIM card and continued on.
I cleaned the screen with alcohol as the directions stated, put everything back together..and NOTHING. The thing is bricked. Any ideas how? I wasn't doing anything remotely related/close to the ROM. The only difficulty I had with any part of this (aside from the aforementioned over heating) was with the two ribbon buttons at the bottom, which got slightly tangled in the tape.
Before I attempt to 'unbrick' this does anyone have any other ideas? Battery is good, phone has been plugged/unplugged while attempting to power up....I didn't take anything else apart so I can't think of anything else that would have goofed up this phone.
If your LCD was broken a new bit of glass wouldn't fix it. It's almost impossible to change just the glass without damaging the digitizer. Most alcohol will destroy an LCD so cleaning it with that is a terrible idea. If you plug your phone into a computer see if it connects, that will at least tell you that the phone is still working, just broken display.
DrFredPhD said:
If your LCD was broken a new bit of glass wouldn't fix it. It's almost impossible to change just the glass without damaging the digitizer. Most alcohol will destroy an LCD so cleaning it with that is a terrible idea. If you plug your phone into a computer see if it connects, that will at least tell you that the phone is still working, just broken display.
Click to expand...
Click to collapse
Awesome. Per the instructions: "clean screen with Isopropyl alcohol to remove any excess glue"
Plugged in or otherwise, I get no LEDs, vibrations....nothing. Wondering if a jtag would even be worth it?
So my girlfriend dropped her s3 the other night , the screen stays off ( does not light up ) but the touch sensors still work, we can answer calls on it by knowing the approximate location of the answer button, any thoughts on what the issue is ? I would prefer to repair this at home rather than make her pay money through a shop, thanks in advance
Darknod66 said:
So my girlfriend dropped her s3 the other night , the screen stays off ( does not light up ) but the touch sensors still work, we can answer calls on it by knowing the approximate location of the answer button, any thoughts on what the issue is ? I would prefer to repair this at home rather than make her pay money through a shop, thanks in advance
Click to expand...
Click to collapse
It is easy to replace broken GLASS.
but i think you will need to replace screen.
If you purchase assembly of glass, digitizer and screen it will be very easy to replace by yourself.
quaker1985 said:
It is easy to replace broken GLASS.
but i think you will need to replace screen.
If you purchase assembly of glass, digitizer and screen it will be very easy to replace by yourself.
Click to expand...
Click to collapse
The glass isnt broken, perfectly clean with no scratches cracks or nicks , it just wont light up;
i had the same problem once, had to be sent to samsung (or wherever) by the shop where i bought it
buying a display and metal frame (obviously you can't buy them seperatly) plus glass would have cost almost the same
i wanted to find out whether the screen still works and it's a problem with my motherboard or vice versa so i unscrewed all bolts to access where the screen is plugged in on the motherboard but i didn't have another s3 to do the same and check it :silly:
still don't know how amoled displays work so it might be possible that whatever's responsible for backlighting the display broke
w0rinal said:
i had the same problem once, had to be sent to samsung (or wherever) by the shop where i bought it
buying a display and metal frame (obviously you can't buy them seperatly) plus glass would have cost almost the same
i wanted to find out whether the screen still works and it's a problem with my motherboard or vice versa so i unscrewed all bolts to access where the screen is plugged in on the motherboard but i didn't have another s3 to do the same and check it :silly:
still don't know how amoled displays work so it might be possible that whatever's responsible for backlighting the display broke
Click to expand...
Click to collapse
My thought was that the backlight broke or maybe the entire display system is disconnected , I might just have to take it apart for an exploratory operation,
before it went completely black there was a purple stain which grew until two thirds of my display were purple, the lower part where it started was black.
then i managed to open this samsung hardware debugging menu where you can check for dead pixels by letting your display light up in red, green and blue. there i found out that only blue and green pixels very working correctly in the upper third. the next day every purple pixel was dead.
so 2 months after this little stain appeared my whole display was in the same state as your girlfriend's seem to be now.
so i don't think this plug (it sits in place pretty tight) got loose and that's why it doesn't work anymore.
and my sister had exactly your problem. she dropped her s2 and it immediately went black
she hat to sent it in as well ...
good luck
if you find out what's the problem and want to share it, i am curious about it as well
If possible, check for loose connectors first.
I don't know about replacing the screen. The sheer amount of LOCA makes it a messy job.
Probably the display is dead. You'd need to replace the screen+glass.
There is no back light on an oled screen.
Sent from my GT-I9300 using Tapatalk
Hello, one of my Android phone (not present on xda) got its LCD damaged apparently. Strange cause i don't remember hearting it ever, and it's supposed to have last gorilla glass.. Anyways, there are like very tiny vertical invisible lines which makes text & everything looks pixelated.
This still let you use the phone, just can't read small text. But after ~20' with screen on (any use) one side + other parts of it while really get fuc*** up more & more. Turning screen off & then on just after will make issue go.. Until next ~20' use.
If i push a little hard on a specific place, then lines will comes and go, once again after on/off. Sometimes they'll stay for a while, listing "ghosting" (or maybe it's not that word?). Any ways to "repair" this without disassembly?
goja said:
Hello, one of my Android phone (not present on xda) got its LCD damaged apparently. Strange cause i don't remember hearting it ever, and it's supposed to have last gorilla glass.. Anyways, there are like very tiny vertical invisible lines which makes text & everything looks pixelated.
This still let you use the phone, just can't read small text. But after ~20' with screen on (any use) one side + other parts of it while really get fuc*** up more & more. Turning screen off & then on just after will make issue go.. Until next ~20' use.
If i push a little hard on a specific place, then lines will comes and go, once again after on/off. Sometimes they'll stay for a while, listing "ghosting" (or maybe it's not that word?). Any ways to "repair" this without disassembly?
Click to expand...
Click to collapse
Not likely without dis-assembly.
Nothing to be done about that without replacing the LCD. Gorilla glass has nothing to do with the LCD, for future reference. The Gorilla glass is only for the top glass.
I know that of course.. What i meant is : how could the LCD be damaged this way if 1/ i'm cautious 2/ it has gorilla glass.
Could this be a bad LCD that started dying only after days of being ON? I'm planning on getting same phone but i'm worried..
goja said:
I know that of course.. What i meant is : how could the LCD be damaged this way if 1/ i'm cautious 2/ it has gorilla glass.
Could this be a bad LCD that started dying only after days of being ON? I'm planning on getting same phone but i'm worried..
Click to expand...
Click to collapse
Just depends on the phone. Nowadays many of the phones are so focused on being slim with tiny bezels that it doesn't take much to break the LCD. I've known people that broke their phone just from being in the front pocket. Never dropped or hit anything, etc. I own a little repair shop and have seen it more than once and have read about others online with similar issues. And sometimes parts just go bad. Just like any other tech based thing.
I see.. Ayways, as said i can still use it, things will just get bad after a moment, i'll just turn off/on and all's gone.
Will it goes on like this forever? I mean, unless accident happens, it won't get worse? Better either i guess..?