PhilZ Touch 6 RecoveryCWM Advanced Edition 6.x
Main thread + features + install instructions + dev support
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Downloads:
6.30.2
Philz v6.30.2 - 6.0.4.8 [2nd-init]
Philz v6.30.2 - 6.0.4.8
6.40.0
Philz v6.40.0 - 6.0.4.8 [2nd-init]
Philz v6.40.0 - 6.0.4.8
Bugs:
-No mount internal sdcard
Source:
Polloos - Philz Recovery
Reserved
Links down temporary
Wysłane z mojego LG-P760 przy użyciu Tapatalka
sebx_g1 said:
Links down temporary
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Click to expand...
Click to collapse
Links work fine for me :/
Link's not working for me either...
Can you share your device source? I can help you to fix the problem
Send from my Pager using xda-developers app
viktorfk said:
Link's not working for me either...
Click to expand...
Click to collapse
I think it is Mega site problem, temporary but how long?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Great
Polloos that's great. Thanks
A lot of new features, that I miss in classic CWM
I have only one question, is possible to make any apk which will reboot phone to your 2-init recovery ? Like has artas, but with his apk it doesn't work anymore :/
sebx_g1 said:
I think it is Mega site problem, temporary but how long?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Click to expand...
Click to collapse
Other link to Philz:
http://data.hu/get/7661540/Philz_v6.30.2_-_v6.0.4.8.zip
TEST MODE / SDK-NX V.1 [AOSP] BY NASHEICH / LG OPTIMUS L9 P760 / TAPATALK PRO
JulianJenner said:
Other link to Philz:
http://data.hu/get/7661540/Philz_v6.30.2_-_v6.0.4.8.zip
TEST MODE / SDK-NX V.1 [AOSP] BY NASHEICH / LG OPTIMUS L9 P760 / TAPATALK PRO
Click to expand...
Click to collapse
For me MEGA links works fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But when I try to download to my phone then displays temporary wrong message...
TEST MODE MOKEE 2014.03.30. by Nasheich LG OPTIMUS L9 P760 TAPATALK PRO 4.4.12
---------- Post added at 09:43 AM ---------- Previous post was at 09:39 AM ----------
wlado93 said:
For me MEGA links works fine
Click to expand...
Click to collapse
TEST MODE MOKEE 2014.03.30. by Nasheich LG OPTIMUS L9 P760 TAPATALK PRO 4.4.12
Link for 2nd init recovery works,but for normal it doesnt
ali.filth said:
Can you share your device source? I can help you to fix the problem
Send from my Pager using xda-developers app
Click to expand...
Click to collapse
I dont have device tree, i'm using @dhiru1602's device tree.
This is the extra.fstab:
Code:
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/block/platform/omap/omap_hsmmc.1/by-name/boot /boot emmc defaults defaults
/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery /recovery emmc defaults defaults
/dev/block/platform/omap/omap_hsmmc.1/by-name/system /system ext4 ro,barrier=1 wait
/dev/block/platform/omap/omap_hsmmc.1/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered wait,check
/dev/block/platform/omap/omap_hsmmc.1/by-name/userdata /data ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc wait,check,encryptable=/dev/block/platform/msm_sdcc.1/by-name/metadata
/dev/block/platform/omap/omap_hsmmc.1/by-name/persist /persist ext4 nosuid,nodev,barrier=1,data=ordered,nodelalloc wait
/devices/platform/omap/omap_hsmmc.0/mmc_host /storage/sdcard0 vfat defaults voldmanaged=sdcard:auto
/dev/block/platform/omap/omap_hsmmc.0/by-num/p1 /external_sd vfat defaults recoveryonly
wlado93 said:
Polloos that's great. Thanks
A lot of new features, that I miss in classic CWM
I have only one question, is possible to make any apk which will reboot phone to your 2-init recovery ? Like has artas, but with his apk it doesn't work anymore :/
Click to expand...
Click to collapse
Not works his apk? :/
I don't tried it, but in other recoveries works fine. It's possible create a app for install TWRP, CWM & PhilZ for locked and lock bl and reboot to recovery but i dont have experience programing apps
JulianJenner said:
Other link to Philz:
http://data.hu/get/7661540/Philz_v6.30.2_-_v6.0.4.8.zip
TEST MODE / SDK-NX V.1 [AOSP] BY NASHEICH / LG OPTIMUS L9 P760 / TAPATALK PRO
Click to expand...
Click to collapse
Thanks a lot!
This Philz Recovery work brightness?
Polloos said:
I dont have device tree, i'm using @dhiru1602's device tree.
This is the extra.fstab:
Code:
# Android fstab file.
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
/dev/block/platform/omap/omap_hsmmc.1/by-name/boot /boot emmc defaults defaults
/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery /recovery emmc defaults defaults
/dev/block/platform/omap/omap_hsmmc.1/by-name/system /system ext4 ro,barrier=1 wait
/dev/block/platform/omap/omap_hsmmc.1/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered wait,check
/dev/block/platform/omap/omap_hsmmc.1/by-name/userdata /data ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc wait,check,encryptable=/dev/block/platform/msm_sdcc.1/by-name/metadata
/dev/block/platform/omap/omap_hsmmc.1/by-name/persist /persist ext4 nosuid,nodev,barrier=1,data=ordered,nodelalloc wait
/devices/platform/omap/omap_hsmmc.0/mmc_host /storage/sdcard0 vfat defaults voldmanaged=sdcard:auto
/dev/block/platform/omap/omap_hsmmc.0/by-num/p1 /external_sd vfat defaults recoveryonly
Not works his apk? :/
I don't tried it, but in other recoveries works fine. It's possible create a app for install TWRP, CWM & PhilZ for locked and lock bl and reboot to recovery but i dont have experience programing apps
Thanks a lot!
This Philz Recovery work brightness?
Click to expand...
Click to collapse
ok..will try..and i need you or some one to try it..
EDIT : LINK DOWNLOAD BUILD 1 : http://d-h.st/ne4
install via your old cwm recovery and please give me result as soon as possible
thanks
ali.filth said:
ok..will try..and i need you or some one to try it..
EDIT : LINK DOWNLOAD BUILD 1 : http://d-h.st/ne4
install via your old cwm recovery and please give me result as soon as possible
thanks
Click to expand...
Click to collapse
I tried this, but /storage/sdcard0 is /external_sd :S
Polloos said:
I tried this, but /storage/sdcard0 is /external_sd :S
Click to expand...
Click to collapse
yes, I made it so..
can you tell me you "sdcard0" is internal or external (micro sd) ? if wrong I will change it
ali.filth said:
yes, I made it so..
can you tell me you "sdcard0" is internal or external (micro sd) ? if wrong I will change it
Click to expand...
Click to collapse
"sdcard0" is internal, external is SD
Trouble
Polloos said:
"sdcard0" is internal, external is SD
Click to expand...
Click to collapse
I flash Ali's Philz Reco. "Philz Touch (Ali) 6"
Unfortunately all is external...!!!
If I choose storage/sdcard0 then it go to external SD card.
And if I choose /external_sd then it go to external SD card again.
Large errors may arise from this! This is not good ...
Polloos said:
"sdcard0" is internal, external is SD
Click to expand...
Click to collapse
so, it's correct?
JulianJenner said:
I flash Ali's Philz Reco. "Philz Touch (Ali) 6"
Unfortunately all is external...!!!
If I choose storage/sdcard0 then it go to external SD card.
And if I choose /external_sd then it go to external SD card again.
Large errors may arise from this! This is not good ...
Click to expand...
Click to collapse
hi bro..this is first build and i don't have this device also..i'm just help @pollos and you all to get this recovery work on your device..i can fix that as soon as possible
Ok. I don't want to disturb you... I just tell the fact , I'm proud of you, that you made a Recovery for us! Peace ya! And Metal Forever!
TEST MODE / STOCK V20O WITH AMNIK KERNEL / LG OPTIMUS LGP760 / TAPATALK PRO 4.5.0
Related
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Preface:
Read through this post. Don't rush into flashing. Be sure you understand the process before you start
This is a custom kernel developed for Android Jellybean
Do NOT try this kernel on other Android versions - you are totally unsupported
This kernel introduces custom mtd partitioning with larger /system partition to hold the extra JB calories. If you are moving from another custom kernel to this one, you MUST first format /system /data and /cache via the embedded CWM recovery
Features:
Forked from nAa-ics-04 (all ICS features are already in there)
Built with linaro-4.7.1 toolchain
CWM-Based Recovery 5.5.0.4
Custom mtd partitioning scheme suitable for JB
Modular recovery flashing support (more on that to come...)
Tracing support for JB
pmem: bring up2date with CAF 2.6.38
genlock/kgsl fixes
Triple buffering support for msm framebuffer
Much more RAM for improved multitasking experience (shakira: 186MB, robyn/mimmi: 187MB)
FAQ:
If you have any issues, please read the FAQ thread first: http://forum.xda-developers.com/showthread.php?p=30297163
Requirements:
Unlocked bootloader --> http://forum.xda-developers.com/showthread.php?t=1254225
MiniCM10 or any JB, source-based ROM (install this kernel first, format /system, /data and /cache, then install the JB ROM)
Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://forum.xda-developers.com/showthread.php?t=920746
Install:
Backup
Unlock your bootloader as described here: http://forum.xda-developers.com/showpost.php?p=17384177&postcount=3 or here: http://forum.xda-developers.com/showthread.php?t=1254225
Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
Flash the kernel via Flashtool
Reboot and you should see the kernel boot animation
[*] (First time only) Get into recovery and format /system /cache and /data manually
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Uninstall:
Flash back to stock using SEUS.
OR
[*] Format /system /data and /cache via CWM and THEN flash another kernel via Flashtool
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel-jb
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
Changelog:
### nAa-jb-02
* Ramdisk changes
* Increase vm_max_readahead to 1024Kb
### nAa-jb-01
* Forked from nAa-ics-04
* Tracing support for JB
* pmem: bring up2date with CAF 2.6.38
* genlock/kgsl fixes
* Triple buffering support for msm framebuffer
* Much more RAM
* Custom mtd partitioning for JB
MTD partitioning for Jellybean:
localhost / # cat /proc/mtd
dev: size erasesize name
mtd0: 10500000 00020000 "system"
mtd1: 00500000 00020000 "cache"
mtd2: 0bfc0000 00020000 "userdata"
mtd3: 00a00000 00020000 "recovery"
localhost / # df -h
...
/dev/block/mtdblock0 261.0M 238.1M 22.9M 91% /system
/dev/block/mtdblock2 191.8M 86.5M 105.3M 45% /data
/dev/block/mtdblock1 5.0M 780.0K 4.2M 15% /cache
...
YYYEEEAAAHAHHHH !!!!
SANKYUUU !!
Going to test ASAP
nobodyAtall said:
MTD partitioning for Jellybean:
localhost / # cat /proc/mtd
dev: size erasesize name
mtd0: 10500000 00020000 "system"
mtd1: 00500000 00020000 "cache"
mtd2: 0bfc0000 00020000 "userdata"
mtd3: 00a00000 00020000 "recovery"
localhost / # df -h
...
/dev/block/mtdblock0 261.0M 238.1M 22.9M 91% /system
/dev/block/mtdblock2 191.8M 86.5M 105.3M 45% /data
/dev/block/mtdblock1 5.0M 780.0K 4.2M 15% /cache
...
Click to expand...
Click to collapse
How to use mtd partiton???
Sent from my U20i using xda premium
I tried to move on, to use another phone, but nAa keeps surprising us with impossible ROMs so i´ll stay with my mimmi as long as nAa continue to make it´s magic. Congrats, you´re the best dev.
Does this kernel suports linux swap partition ?
useful links :
[DEV] miniCM10 debug only thread (shakira, robyn and mimmi)
$find other useful link in miniCM7/9 miniFAQs $
Perfomance :
recomended settings :
perf related :
CPU: keep default, but enable UnderVolting (and set on boot if you don't OverClock) (settings>performance>CPU)
RAM : to optimize RAM usage, use KSM, zram (18%, default) and allow purging of assets (settings>performance>memory managment)
I/O : keep NOOP, this is the default and the best for flash memory
other :
in settings>developer options
enable USB debugging,
debug notification,
set all animations to 0.5 (electron beam CRT animation will happen no more)
enable "kill with back button"
________________
for whose who feel the system slow and laggy, just try the SWAP (SDcard class6+ recommended)
SWAP, there is two "kind" of swap : using a partition on the SDcard, or using a swap file
both are good, but some SDcard/phones react better with the one or the other
let us start with the partition way : it is more complicated than the file method, but as some advantages
pros: once it is set up, no need to care about it anymore, the SDcard can be mounted to PC easily without latency
cons: a little complicated to set up, and once it's done, it is as complicated to revert as to set up; to change swap size, you need to repeat the process (formating and partitioning SDcard)
needs a clean install of miniCM10:
flash JB kernel
in CWM, go to mount&storage :
then, format /system, /data and /cache (so that kernel can use the new partitions size) any data on phone memory will be lost
set up your swap:
==> go to /advanced/Partition SD Card
if you don't want to use a2sd, then choose the minimal size for ext, and the size you want for SWAP
it will FORMAT your SDcard ! any data on SDcard will be LOST
and install the rom
swap partition should work
what doesn't work is the swap info menu
to revert : format SDcard in phone settings : it will FORMAT your SDcard ! any data on SDcard will be LOST
____________________
now, the swap file way : it is really simpler than the swap partition, works great but has some drawbacks
pros: easy to set up, easy to revert, and the size can be choosen at wish at anytime (in settings>performance>memory>Swap settings)
cons: high latency when mounting SDcard to pc, it can take forever (really quicker to use CWM mount and storage capability to use the SD on the PC, than using android way)
you must perform a clean install of miniCM10 (by formating /system, /data and /cache) any data on phone memory will be lost
install the rom zip, the gapps, and boot up your phone
set it up
once your rom is ready to use,
go to settings>performance>memory>Swap settings
choose "enabled"
choose the size
allow system to get SU permissions
wait for the pop up "swap enabled"
enjoy, it is simple and can be disabled on wish
to see if you swap works, open terminal, and type the following :
Code:
free
I can`t in to recovery, I try reflash the kernel but nothing happened, and yes I press back bottom, any help, with nAa-13 work the recovery...
The "Reboot into recovery" option isn't working (from within recovery or jellybean), always have to do it manually w/ multiple back button presses.
herbesi01 said:
I can`t in to recovery, I try reflash the kernel but nothing happened, and yes I press back bottom, any help, with nAa-13 work the recovery...
Click to expand...
Click to collapse
The same issue. After formating on nAn-13 kernel /system, /data and /cache and flash the kernel i cant get into CWM on nAn-jb-01 kernel. Any ideas what seems to be a problem?
Mitchio said:
The "Reboot into recovery" option isn't working (from within recovery or jellybean), always have to do it manually w/ multiple back button presses.
Click to expand...
Click to collapse
Works here. You have to press home after a little bit and it will reboot fine rather than being stuck on rebooting
X10man
Sent from my U20i using xda premium
x10man said:
Works here. You have to press home after a little bit and it will reboot fine rather than being stuck on rebooting
X10man
Sent from my U20i using xda premium
Click to expand...
Click to collapse
It reboots fine, when I select reboot into recovery (either from within cwm or within the os) it just boots as normal and goes into the os; as opposed to booting straight into recovery.
Very good kernel!
Now my cpu can run also at 787mhz without problem! (with naa-ics-04 mi limit was 748mhz).
Inviato dal mio U20i con Tapatalk 2
noob question here, how do you format /system /data and /cache manually in CMW ??
---edit
found it in mount & storage n.n
SleepingTurtle_I said:
noob question here, how do you format /system /data and /cache manually in CMW ??
---edit
found it in mount & storage n.n
Click to expand...
Click to collapse
In CWM recovery go to mounts or something that like name and go into that menu and you will see these options.
Sent from my U20i using xda premium
This doesn't work for me
I can't get back to recovery
@all the complains about stuck restart.
IF YOU ARE STUCK:
Install U20_nAa-ics-04_2.6.29.6-nAa-ics-04.zip flashing the same way.
wipe /cache /data /system via CWM then follow the instructions from nobodyAtall
IF YOU ARE NOT STUCK:
wipe /cache /data /system via CWM then follow the instructions from nobodyAtall
@naa
Could you implement the 200mb ram fix on the cm7 or cm9 kernels or would there be side effects?
Sent from my U20i using xda app-developers app
ales47 said:
@naa
Could you implement the 200mb ram fix on the cm7 or cm9 kernels or would there be side effects?
Sent from my U20i using xda app-developers app
Click to expand...
Click to collapse
No, this is only for JB. Other android versions will probably have issues.
Sent from my Galaxy Nexus using Tapatalk 2
Please knowledgeable people help me in getting at the root smartphone. I have tried every possible way. It was the ADB can not access, so this installation method will not work. Looking for a digital computer, but it is not under our device.
Click to expand...
Click to collapse
I and SergioPoverony from 4pda . ru build fully worked CWM 6.0.2.1 for Alcatel 993D!
Unpack CWM 6.0.1.2_final_install.zip to root folder and start "install-recovery-windows.bat"
Download:View attachment 1509133
For restore original recovery download: View attachment recovery_orig.zip
Afer install any root.zip for CWM! GoodLuck!
Original post on Russian forum: 4pda.ru
beeline09 said:
Please knowledgeable people help me in getting at the root smartphone. I have tried every possible way. It was the ADB can not access, so this installation method will not work. Looking for a digital computer, but it is not under our device.
Click to expand...
Click to collapse
I've got great news for you !
I have successfully rooted the device with this tool: http://forum.xda-developers.com/attachment.php?attachmentid=1343515&d=1348245161
Just follow the instructions, that the program says!
Credits goes to: Bin4ry
Original thread can be found here: http://forum.xda-developers.com/showthread.php?t=1886460
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root, flash player, cwm recovery.
qltsar said:
I've got great news for you !
I have successfully rooted the device with this tool: http://forum.xda-developers.com/attachment.php?attachmentid=1343515&d=1348245161
Just follow the instructions, that the program says!
Credits goes to: Bin4ry
Original thread can be found here: http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
To root, I need to install some drives in Pc.
There is flash player, and cwm recovery, for this smartphone.
Thanks for the answers
lmt399 said:
To root, I need to install some drives in Pc.
There is flash player, and cwm recovery, for this smartphone.
Thanks for the answers
Click to expand...
Click to collapse
There is no any customized CWM yet, you can download flashplayer manually from the internet, just try to google it .
The drivers included at the phone's flasher tool, in the One Touch Upgrade Q, or you can install Android Manager. Both of them have the necessary drivers.
qltsar said:
There is no any customized CWM yet, you can download flashplayer manually from the internet, just try to google it .
The drivers included at the phone's flasher tool, in the One Touch Upgrade Q, or you can install Android Manager. Both of them have the necessary drivers.
Click to expand...
Click to collapse
Ok thanks for the reply.
I bought one, should arrive tomorrow.
Keep the thread alive.
CWM recovery PLEASE...
qltsar said:
I've got great news for you !
I have successfully rooted the device with this tool: http://forum.xda-developers.com/attachment.php?attachmentid=1343515&d=1348245161
Just follow the instructions, that the program says!
Credits goes to: Bin4ry
Original thread can be found here: http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
Phone rooted successfully.
Any news about, CWM recovery or costum room.
qltsar said:
I've got great news for you !
I have successfully rooted the device with this tool: http://forum.xda-developers.com/attachment.php?attachmentid=1343515&d=1348245161
Just follow the instructions, that the program says!
Credits goes to: Bin4ry
Original thread can be found here: http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
Thank you used this on my OT-997D and i have root acces thanks
CWM recovery?
Klaasv00k said:
Thank you used this on my OT-997D and i have root acces thanks
Click to expand...
Click to collapse
Who could receive CWM recovery on Alcatel One Touch 993d -997? I ask to help with it .
72angel86 said:
Who could receive CWM recovery on Alcatel One Touch 993d -997? I ask to help with it .
Click to expand...
Click to collapse
I've tried to make it, but it seems to be there are some problems...I can get a rootshell, but the display can't work.
The OT-997 is another fail for me. I cannot make the communication between SP Flashtool and the device. It seems that the scatter file is incorrect, but i don't know how to correct it. If there is someone who has a little experience with ZTE V970 please help me with this, because that model has the same MTK chipset.
qltsar said:
I've tried to make it, but it seems to be there are some problems...I can get a rootshell, but the display can't work.
The OT-997 is another fail for me. I cannot make the communication between SP Flashtool and the device. It seems that the scatter file is incorrect, but i don't know how to correct it. If there is someone who has a little experience with ZTE V970 please help me with this, because that model has the same MTK chipset.
Click to expand...
Click to collapse
I do not know much about cmw recovery but used it on other phones to flash a custom ROM
I have used the method described here to see if I could root my phone
it worked and now I can install AdFree to block advertising
I do not have advertising on my phone now
because the OT-997D is a brand new phone release date 10/10/2012
I do not think there is already a custom ROM for the phone
for CWM Recovery
try http://builder.clockworkmod.com/
you need to dump your stock recovery.img
magikstar said:
for CWM Recovery
try http://builder.clockworkmod.com/
you need to dump your stock recovery.img
Click to expand...
Click to collapse
Do you think, i didn't tried that solution? The recovery-s that i built, couldn't show anything on the screen. It seemes that the device has a specalized framebuffer to initialize the display. I've also tried to port a CWM from a 7227A device, but I was facing the same problems.
CWM
qltsar said:
Do you think, i didn't tried that solution? The recovery-s that i built, couldn't show anything on the screen. It seemes that the device has a specalized framebuffer to initialize the display. I've also tried to port a CWM from a 7227A device, but I was facing the same problems.
Click to expand...
Click to collapse
Sorry for my english, translate through Google. I am a Russian-speaking. Here is a partition table for the Alcatel OT-993D:
Code:
/dev/block/mmcblk0p1 qcsblhd_cfgdata.mbn
/dev/block/mmcblk0p2 qcsbl.mbn
/dev/block/mmcblk0p3 /FAT vfat AMSS.MBN AMSSHD.MBN
/dev/block/mmcblk0p5 OEMSBL.MBN
/dev/block/mmcblk0p6 /APPSBL emmc EMMCBOOT.MBN
/dev/block/mmcblk0p7
/dev/block/mmcblk0p8 /boot emmc boot.img
/dev/block/mmcblk0p9
/dev/block/mmcblk0p10
/dev/block/mmcblk0p11
/dev/block/mmcblk0p12 info about imei, FW version, boot & recovery version
/dev/block/mmcblk0p13 /system ext4 system
/dev/block/mmcblk0p14 /data ext4 data
/dev/block/mmcblk0p15 /custpack ext4 custom
/dev/block/mmcblk0p16 /cache ext4 cache
/dev/block/mmcblk0p17 /recovery emmc recovery.img
/dev/block/mmcblk0p18 /misc emmc misc
/dev/block/mmcblk0p19 /secro emmc secro
/dev/block/mmcblk0p20
/dev/block/mmcblk0p21 /emmc vfat userdata
/dev/block/mmcblk1p1 /dev/block/mmcblk1p2 /sdcard vfat ???????
Managed by busybox dd command to copy the recovery partition. Then I do not know what to do. I hope I helped somewhat. Really want CWM to our phone. Let's get together sometime and try to port CWM for this circuit?
Auto-capitalization (Messages)
Anyone else experiencing the auto-capitalization problem whenever you type in messages. Did you find any solution to this?
What?
spaces27 said:
Anyone else experiencing the auto-capitalization problem whenever you type in messages. Did you find any solution to this?
Click to expand...
Click to collapse
I do not understand. Can you explain to another?
beeline09 said:
I do not understand. Can you explain to another?
Click to expand...
Click to collapse
Hello beeline09.
Can I get the battery mod that put you in the Russian forum.
http://4pda.ru/forum/index.php?showtopic=371270&st=1600
post#1619
Thank you very much
Yes
lmt399 said:
Hello beeline09.
Can I get the battery mod that put you in the Russian forum.
post#1619
Thank you very much
Click to expand...
Click to collapse
Yes, of course! Proceed as indicated in the instructions and you will have a battery
Upload your battery mod file - systemui.apk
beeline09 said:
Yes, of course! Proceed as indicated in the instructions and you will have a battery
Click to expand...
Click to collapse
yes, but what I needed was your battery mod file - systemui.apk.
Upload to this thread.
thank you :fingers-crossed:
CWM really working on Alctatel OT-993D
qltsar said:
Do you think, i didn't tried that solution? The recovery-s that i built, couldn't show anything on the screen. It seemes that the device has a specalized framebuffer to initialize the display. I've also tried to port a CWM from a 7227A device, but I was facing the same problems.
Click to expand...
Click to collapse
We already have a working CWM. Link: on russian site 4 pda ru
beeline09 said:
We already have a working CWM. Link: on russian site 4 pda ru
Click to expand...
Click to collapse
Good job.
After days of looking for a solution to the problem of every 2011 device I've finally managed to do it!
Many of you wanna enable ART functionnality in 4.4.2 because the device start "flying" with such a pill. So I've managed to modify the Int2Ext v2 script to run it lagless and conserving initial performance.
Prerequesites:
1. You have to make an EXT partition (I've got an EXT4 1 GB partition)
2. Flash the script BEFORE the first boot (like any other package such as gapps).
3. (Optionnal) Reboot once, and enable ART in developement menu.
4. Enjoy!
What it does exactly?
1. Increase the readahead cache for your sd to 4096 kb
2. Transfers /data/app & /data/app-private to the ext partition of the SD
3. Everything that a CronMod-INT2EXT script does
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All credits goes to the creator of the original script. Ive simply deleted a line inside
You're welcome for testing.:good:
Small FAQ & corrected verision to avoid signal loss:
nos1609 said:
1. Tested in couple with Vanir/Carbon - unstable under ART, Dalvik recommanded
Tested on PAC working like a charm on both ART & Dalvik
2. To avoid reboots / FCs try flashing ART compatible gapps
3. About the "internal memory waste" Guys, please check the description of what the script is doing and what folders are moved onto EXT-partition. If everything would so simle as that, even ART mode couldn't overcome the laggynes and the lack of performance after moving everything to sdcard. The script is moving ONLY APKs to the EXT-partition. Dalvik, libs etc remains on the 470 Mb NAND to conserve initial performance. But enen that amount of free space is not enough to run ART experience at it full potential. because of very large dalvik-cache size.
4. EXT partition. Just google, XDA contains tons of manuals and tools to create one. If you'd like to simply try ART 512 MB one will be enough, you'll reach the internal NAND limitation. If you want using it in normal mode you can make the partition as large as you like.
5. Concerning the loss of signal, I think there are some lack of time for the device itself to get the new location of the files, so try this new package.
Click to expand...
Click to collapse
vipinpvarghese said:
Those who have issue with signal loss after flash this script there is a way out... Just install Link2sd after flashing the script... Open Link2sd, give super user permissions and Link2sd will automatically create scripts and ask you to reboot.... thats is..... you should be able to get signals after reboot.... You can even uninstall Link2Sd after rebooting....
For me it is working in Mike's latest build, PA final build and Pac man latest build....
Click to expand...
Click to collapse
UPDATE: Working fix for signal loss
If i update the nightly rom. Am i need to re-flash the zip? This worked with Dalvik too right?
WaterMelon90 said:
If i update the nightly rom. Am i need to re-flash the zip? This worked with Dalvik too right?
Click to expand...
Click to collapse
Yes you need to reflash & sure it works with Dalvik
Hello, I really wanted to try this, and partitioned my SD card. Now, i am not able to see the created 1GB ext4 partition. I created that partition with MINITool Partition Wizard. For restoring it, I tried using GParted also but of no use. Out of 7.4 GB, only 6.4 is accessible. Kindly help. And one more thing. Dark Kernel is not even recognizing the SD Card.
@nos1609 , I had tried it in C-rom. I flashed it after the installation of C-rom then reboot. However, it can't boot into system. Anyone faced this problem? I had wait for the boot around 15-20 minutes but it stuck.
Can I:
1) Install rom, reboot into system.
2) Reboot into recovery and flash the zip then reboot.??
WaterMelon90 said:
@nos1609 , I had tried it in C-rom. I flashed it after the installation of C-rom then reboot. However, it can't boot into system. Anyone faced this problem? I had wait for the boot around 15-20 minutes but it stuck.
Can I:
1) Install rom, reboot into system.
2) Reboot into recovery and flash the zip then reboot.??
Click to expand...
Click to collapse
for me, it's also the only way to boot. nevertheless, i have no signal i tried the 2.1 version but no more success...
work on mike legacy xperia rom?
Yes it's working like a charm
Wysłane z mojego MT11i przy użyciu Tapatalka
atomrat said:
Yes it's working like a charm
Wysłane z mojego MT11i przy użyciu Tapatalka
Click to expand...
Click to collapse
i'm really surprise because i build my rom from mike's sources and i've no succesd with this mod. if it's really ok for the memory use is ok, i've no signal..., so the phone is unusable
It's not working on AOSB, XUK, and C-ROM.. i tried it in the first boot after install new rom and i got a bootloop,, 30 minutes and still at boot animation..
anyone know how to make it works? really wanted to use it in 4.4 rom.. is it because the kernel? because i using the kernel provide in the rom.
sorry for the noob question.
Install rom.boot the rom then reboot to recovery and install script for me always works
Wysłane z mojego MT11i przy użyciu Tapatalka
nos1609 said:
After days of looking for a solution to the problem of every 2011 device I've finally managed to do it!
Many of you wanna enable ART functionnality in 4.4.2 because the device start "flying" with such a pill. So I've managed to modify the Int2Ext v2 script to run it lagless and conserving initial performance.
Prerequesites:
1. You have to make an EXT partition (I've got an EXT4 1 GB partition)
2. Flash the script BEFORE the first boot (like any other package such as gapps).
3. (Optionnal) Reboot once, and enable ART in developement menu.
4. Enjoy!
What it does exactly?
1. Increase the readahead cache for your sd to 4096 kb
2. Transfers /data/app & /data/app-private to the ext partition of the SD
3. Everything that a CronMod-INT2EXT script does
Screenshots
All credits goes to the creator of the original script. Ive simply deleted a line inside
You're welcome for testing.:good:
Small FAQ & corrected verision to avoid signal lossriginally Posted by nos1609 View Post
1. Tested in couple with Vanir/Carbon - unstable under ART, Dalvik recommanded
Tested on PAC working like a charm on both ART & Dalvik
2. To avoid reboots / FCs try flashing ART compatible gapps
3. About the "internal memory waste" Guys, please check the description of what the script is doing and what folders are moved onto EXT-partition. If everything would so simle as that, even ART mode couldn't overcome the laggynes and the lack of performance after moving everything to sdcard. The script is moving ONLY APKs to the EXT-partition. Dalvik, libs etc remains on the 470 Mb NAND to conserve initial performance. But enen that amount of free space is not enough to run ART experience at it full potential. because of very large dalvik-cache size.
4. EXT partition. Just google, XDA contains tons of manuals and tools to create one. If you'd like to simply try ART 512 MB one will be enough, you'll reach the internal NAND limitation. If you want using it in normal mode you can make the partition as large as you like.
5. Concerning the loss of signal, I think there are some lack of time for the device itself to get the new location of the files, so try this new package.
Click to expand...
Click to collapse
With new package signal is still lost :crying:[error selecting network while search]
atomrat said:
Install rom.boot the rom then reboot to recovery and install script for me always works
Wysłane z mojego MT11i przy użyciu Tapatalka
Click to expand...
Click to collapse
what rom did u use? kitkat or jb?
Kitkat legacy xperia
Wysłane z mojego MT11i przy użyciu Tapatalka
atomrat said:
Kitkat legacy xperia
Wysłane z mojego MT11i przy użyciu Tapatalka
Click to expand...
Click to collapse
did u ever try to another rom like kitkat pac, carbon, or anything except LX?
because i always got bootloop..
No i only use LX
Wysłane z mojego MT11i przy użyciu Tapatalka
Signal loss even in PAC build
any fix?
"format /sd-ext"
the last step in CronMod INT2EXT says we need to format sd-ext, do we need to do the same here also?????
make both the partitions as primary
badboy4a2 said:
Hello, I really wanted to try this, and partitioned my SD card. Now, i am not able to see the created 1GB ext4 partition. I created that partition with MINITool Partition Wizard. For restoring it, I tried using GParted also but of no use. Out of 7.4 GB, only 6.4 is accessible. Kindly help. And one more thing. Dark Kernel is not even recognizing the SD Card.
Click to expand...
Click to collapse
just make sure u make both the partitions as primary while creating the partitions, i know u must have figured it out in 2 months
Will it work on KitKat Resurrection ROM ? Don't want to loose signal after flash it :/
Envoyé de mon MT11i en utilisant Tapatalk
Hi all,
I am proud to present benchmark competition between ext4 (The White G2) and f2fs (The black G2) file systems on LGG2 with D80230d ESA.
f2fs (The black G2)
I was formatting 3 partitions as below to f2fs.
/cache
/data
/system
I was using 4 benchmark apps ( CF-Bench,RL Bench,Androbench,AnTuTu) to test performance.
CF-Bench
CF-Bench is an overall benchmark by Chainfire which measure everything except graphics.
RL Bench
RL Bench is an SQLite benchmark, it only tests database read/writes with various SQL commands in various amounts.
Androbench
Androbench is supposedly an all-around I/O benchmark.
AnTuTu
No need for an introduction, it's probably the most popular benchmark these days.
[LGG2-Benchmark] File System Performance: F2FS vs EXT4
How to convert ext4 to f2fs file system and install LG Stock ROMs with dorimanx kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks @Androguide.fr for inspiration
Thanks @blastagator for TWRP .It's a great tool.
Thanks @_that @dorimanx for Tip restore f2fs /system partition
Supporting me , please sharing my VDO :laugh:
ขอบคุณครับ
wow, f2fs is pure sh*t on your benchmark. The f2fs g2(on the right) is lagging like crazy. You have to press the home button several times for it to respond lol. Dont care what the numbers say, in the video it is barely usable
thanks for the benchmark
Try OptimusG3 VS LP speed test.
See how OptimusG3 kicks a$$
And no not benchmarks, they dont show sh*t. Real life opening, closing apps, multitasking, browsing etc.
Sent from my LG-D802
migueldbr said:
wow, f2fs is pure sh*t on your benchmark. The f2fs g2(on the right) is lagging like crazy. You have to press the home button several times for it to respond lol. Dont care what the numbers say, in the video it is barely usable
thanks for the benchmark
Click to expand...
Click to collapse
Haha . The black G2 that use f2fs has a 9H+ hardness screen protector.
Sent from my iPad using Tapatalk
White g2 has better lcd???
somboons said:
Haha . The black G2 that use f2fs has a 9H+ hardness screen protector.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Lol didn't notice that xD. In that case f2fs seems good. Never tried it personally, but seems like a good improvement. And you might want to replace that 9h protector, I have one and the screen works just like it wasn't even there=p
Change your protector man. It drives me crazy!! Jaja
Enviado desde mi LG-D802 mediante Tapatalk
so f2fs relies on kernerl or rom? cant rember LOL.
and somboons was it me or on first test, it says 4 cores then mhz/ white says 1995 then on black says 2545.?
isnt the black one overclocked?
so i heard from dorimanx that it was still on test phase f2fs, would you recommend to change format? ive used f2fs before on s2 but i really didnt see a difference.
raptorddd said:
so f2fs relies on kernerl or rom? cant rember LOL.
and somboons was it me or on first test, it says 4 cores then mhz/ white says 1995 then on black says 2545.?
isnt the black one overclocked?
so i heard from dorimanx that it was still on test phase f2fs, would you recommend to change format? ive used f2fs before on s2 but i really didnt see a difference.
Click to expand...
Click to collapse
Clock speed of both is same .Using same profile from dorimanx kernel.
You can look at post 4 from twrp @blastagator's thread for format f2fs file system .
Sent from my LG-D802 using Tapatalk
somboons said:
Clock speed of both is same .Using same profile from dorimanx kernel.
You can look at post 4 from twrp @blastagator's thread for format f2fs file system .
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Yes ive read but theres no f2fs on stock based roms , is it ? or only cm, aosp.
raptorddd said:
Yes ive read but theres no f2fs on stock based roms , is it ? or only cm, aosp.
Click to expand...
Click to collapse
It can use with other roms. However, your kernel MUST support f2fs partitions which for stock rom you can use dorimanx kernel.It's working well.
somboons said:
It can use with other roms. However, your kernel MUST support f2fs partitions which for stock rom you can use dorimanx kernel.It's working well.
Click to expand...
Click to collapse
Well i tried with icex rom. and it gave me an error during aroma installation at the beinning, then i changed back to ext4, yeah am using dorimanx. it was along time since i used f2fs, must i install rom first? cause i did clean installation including sd card. change file systems and then copied rom and got error? di i di something wrong?
raptorddd said:
Well i tried with icex rom. and it gave me an error during aroma installation at the beinning, then i changed back to ext4, yeah am using dorimanx. it was along time since i used f2fs, must i install rom first? cause i did clean installation including sd card. change file systems and then copied rom and got error? di i di something wrong?
Click to expand...
Click to collapse
/data , /cache were f2f2 ? please install icex rom on ext4 + install dorimanx kernel before then backup with twrp after that change /system to f2fs the rename your backup
ex. system.ext4.win to system.f2fs.win (change ext4 to f2fs) all system files after that restore it again.
or
You can edit updater-script replace ext4 to f2fs then format /data , /cache , /system to f2fs after that flash ROM> dorimanx kernel
somboons said:
/data , /cache were f2f2 ? please install icex rom on ext4 + install dorimanx kernel before then backup with twrp after that change /system to f2fs the rename your backup
ex. system.ext4.win to system.f2fs.win (change ext4 to f2fs) all system files after that restore it again.
or
You can edit updater-script replace ext4 to f2fs then format /data , /cache , /system to f2fs after that flash ROM> dorimanx kernel
Click to expand...
Click to collapse
well i dont know what i did wrong.LOL i reformatted to ext4 in twrp. check and it said ext4, installed rom. then installed dorimanx kernel, then i did a back up. i selected all. or what do i need to select.? then change data/cache/system to f2fs. then copied back up before that i renamed all ext4 to f2fs. including .md5. so theres system.ext4/cache.ex4/and data.ext4. i did restore, but then i got stuck on boot. the led light didnt even turned of just logo ..
then i tried other method.
IceX_ROM_v4\META-INF\com\google\android\updater-script
open it with wordpad then changed
set_progress(0.02);
ui_print(" Mounting system...");
unmount("/system");
mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
mount{{{{("ext4 changed to f2fs",}}}} "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
but on aroma it didnt do a thing , in a second it said installation suscesfull.
?
raptorddd said:
well i dont know what i did wrong.LOL i reformatted to ext4 in twrp. check and it said ext4, installed rom. then installed dorimanx kernel, then i did a back up. i selected all. or what do i need to select.? then change data/cache/system to f2fs. then copied back up before that i renamed all ext4 to f2fs. including .md5. so theres system.ext4/cache.ex4/and data.ext4. i did restore, but then i got stuck on boot. the led light didnt even turned of just logo ..
then i tried other method.
IceX_ROM_v4\META-INF\com\google\android\updater-script
open it with wordpad then changed
set_progress(0.02);
ui_print(" Mounting system...");
unmount("/system");
mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
mount{{{{("ext4 changed to f2fs",}}}} "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
but on aroma it didnt do a thing , in a second it said installation suscesfull.
?
Click to expand...
Click to collapse
ok thanks i got it working. what it seems like a boot loop wasnt, i jut let it there and it took more time then usual to start building the dalvik. thanks
ive formatted all 3 systems but data didnt changed to f2fs.
[Benchmark] Performance: F2FS vs EXT4 | How to Convert ext4 to f2fs and Insta...
raptorddd said:
ok thanks i got it working. what it seems like a boot loop wasnt, i jut let it there and it took more time then usual to start building the dalvik. thanks
ive formatted all 3 systems but data didnt changed to f2fs.
Click to expand...
Click to collapse
checking code /data in updater script too.make sure it use f2fs instrad of ext4.
Sent from my iPad using Tapatalk
somboons said:
checking code /data in updater script too.make sure it use f2fs instrad of ext4.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
i fixed it, by back up then change file system, then change data to data.f2fs.win
funny thing the updater only has one ext4 in all updater -script. for system. there are no more ext4 in there.
metteduch said:
Try OptimusG3 VS LP speed test.
See how OptimusG3 kicks a$$
And no not benchmarks, they dont show sh*t. Real life opening, closing apps, multitasking, browsing etc.
Sent from my LG-D802
Click to expand...
Click to collapse
\OoO/
OptimusRs said:
\OoO/
Click to expand...
Click to collapse
Hi
Can u port marshmallow from g3 ????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP_3.0.3 for Samsung Galaxy SM-J510FN J5(2016)
Unofficial
Description:
TWRP_3.0.3 :
Based on TWRP for seed -twrp-3.0.3-0-seed 21.8M 2017-01-02 12:09:51
-Added item in the Backup section ->Modem
-Added Mount-firmware
-Added Mount-persist
OTG -Works good,you can install or Restore from external flash drive
-Theme TWRP-Works good theme-twrp-materialised-dark-light-play
Screenshot -Volume -and Power buttons save in externall SD
What should I back up in TWRP?
Bugs:
- PC mounting MTP (but adb should work,Windows 10 cant install MTP driver)
How to install:
Code:
1. Install device usb drivers and Odin
In Phone Developer options - On OEM unlock
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin as an administrator, connect the device to a usb port,
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
Screenshots:
NEW!!!
TWRP 3.1.0-0 for Samsung Galaxy SM-J510 J5(2016)Old versions:
Description:
TWRP_3.0.2-1 :
-Added item in the Backup section -> System Image
-Added item in the section Install Image -> System Image
TWRP_3.0.2
Fix : No error with third-party reboot,Reboot recovery
Fix :Removed cursor from the screen
Fix :Added in Wipe menu "Android secure''
Fix :OTG -Works good,you can install or Restore from external flash drive
Bugs:
- PC mounting MTP (but adb should work,Windows 10 cant install MTP driver)
View attachment TWRP_3.0.2_J510FN.tar
View attachment TWRP_3.0.2-1_J510FN.tar
Bro , check this:
https://forum.xda-developers.com/galaxy-j5/development/recovery-twrp-3-0-2-samsung-galaxy-t3406889
wolty said:
Bro , check this:
https://forum.xda-developers.com/galaxy-j5/development/recovery-twrp-3-0-2-samsung-galaxy-t3406889
Click to expand...
Click to collapse
Bro ,i I know this with bugs .For my J510FN this TWRP 3.0.2 J510Н -Reboot recovery dont work,cursor in screen,wipe without Android secure.etc
I have repaired these bugs.
Or for you all works ?
https://forum.xda-developers.com/showpost.php?p=69188548&postcount=34
https://forum.xda-developers.com/showpost.php?p=67988962&postcount=14
https://forum.xda-developers.com/showpost.php?p=68115566&postcount=17
https://forum.xda-developers.com/showpost.php?p=68345605&postcount=23
lemlis said:
Bro ,i I know this with bugs .For my J510FN this TWRP 3.0.2 J510Н -Reboot recovery dont work,cursor in screen,wipe without Android secure.etc
I have repaired these bugs.
Or for you all works ?
https://forum.xda-developers.com/showpost.php?p=69188548&postcount=34
https://forum.xda-developers.com/showpost.php?p=67988962&postcount=14
https://forum.xda-developers.com/showpost.php?p=68115566&postcount=17
https://forum.xda-developers.com/showpost.php?p=68345605&postcount=23
Click to expand...
Click to collapse
Recovery is not seandroidenforce
echo -n "SEANDROIDENFORCE" >> recovery.img
?
You change /dev/block/platform/7824900.sdhci/by-name/boot
To
/dev/block/platform/soc.0/7824900.sdhci/by-name/boot
Nice ?
In the other recovery when you rebooted from the recovery while the device is charging. The device enters the charging mode and not the system
The only problem is MTP
When I enter the backup option. Red letters appear saying that could not find something related to the firmware and the efs
Demicro said:
When I enter the backup option. Red letters appear saying
Click to expand...
Click to collapse
Hey bro!For me all works great,you're doing something wrong.There are no red letters.
Only MTP .
lemlis said:
Hey bro!For me all works great,you're doing something wrong.There are no red letters.
Only MTP .
Click to expand...
Click to collapse
In restore
This is normal or I should worry☺
Demicro said:
In restore
This is normal or I should worry
Click to expand...
Click to collapse
"EFS1 and EFS2" your backup was made with old TWRP .
New TWRP dont have partition EFS1 EFS2. Have partition EFS
Make backup with new TWRP- then restore will be without mistakes
TWRP_3.0.2-1 :
-Added item in the Backup section -> System Image
-Added item in the section Install Image -> System Image
I can not fix MTP
There is a problem with this TWRP, after flashing, my computer does not detect anymore my device (odin yes) so I cant open device files from computer...
Sent from my SM-J510FN using XDA Labs
---------- Post added at 11:26 PM ---------- Previous post was at 11:19 PM ----------
lemlis said:
"EFS1 and EFS2" your backup was made with old TWRP .
New TWRP dont have partition EFS1 EFS2. Have partition EFS
Make backup with new TWRP- then restore will be without mistakes
TWRP_3.0.2-1 :
-Added item in the Backup section -> System Image
-Added item in the section Install Image -> System Image
I can not fix MTP
Click to expand...
Click to collapse
With this TWRP my laptop does not detect my device, so I can't transfer files throught usb cable' I use a sd adapter... How to solve this?
Sent from my SM-J510FN using XDA Labs
TheWalkingSans said:
There is a problem with this TWRP, after flashing, my computer does not detect anymore my device (odin yes) so I cant open device files from computer...
Sent from my SM-J510FN using XDA Labs
---------- Post added at 11:26 PM ---------- Previous post was at 11:19 PM ----------
With this TWRP my laptop does not detect my device, so I can't transfer files throught usb cable' I use a sd adapter... How to solve this?
Click to expand...
Click to collapse
It is a known problem, which for now has not been resolved.
Mtp issues in recovery
The phone does not enter the recovery if it is connected to the charger. That is, when a reboot is made from the terminal
Reboot recovery
?
Charge mode
Demicro said:
The phone does not enter the recovery , when a reboot is made from the terminal
Click to expand...
Click to collapse
TWRP_3.0.3
It may be this version will work correctly from the terminal
In this TWRP_3.0.3 from TWRP Terminal reboot recovery comand works good
error unmounting \'/cache\' (no such device)
trying to format a partition to f2fs
to restore to ext4 I have to do it manually because if I try to farmat to ext4 the error appear
mke2fs -t ext4 /dev/block/bootdevice/by-name/cache
your mke2fs.conf file does not define the f2fs filesystem type
formating with mkfs.f2fs === succefull but twrp can't mount f2fs partition
Demicro said:
trying to format a partition to f2fs
to restore to ext4 I have to do it manually because if I try to farmat to ext4 the error appear
mke2fs -t ext4 /dev/block/bootdevice/by-name/cache
your mke2fs.conf file does not define the f2fs filesystem type
Click to expand...
Click to collapse
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#TODO: Add 'check' as fs_mgr_flags with data partition.
# Currently we dont have e2fsck compiled. So fs check would failed.
lemlis said:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#TODO: Add 'check' as fs_mgr_flags with data partition.
# Currently we dont have e2fsck compiled. So fs check would failed.
Click to expand...
Click to collapse
I can not restore the backup because twrp can not mount f2fs
I added f2Fs to the kernel for the future
flag in the anykernel zip
f2fs=true or false
and I will cheery pick f2fs(linux 3.18) from the official twrp source code for J7
Demicro said:
I can not restore the backup because twrp can not mount f2fs
Click to expand...
Click to collapse
Maybe dann need to make TWRP from your new version kernel with added f2Fs to the kernel for the future ?
Sorry,my english is very bad.I do not quite understand what I have to do?
New Recoverys with Aroma support for J5 2016
Here
New Thread Here:
TWRP 3.1.0-0 for Samsung Galaxy SM-J510 J5(2016)
Thread closed on OP's request.
Regards
Vatsal,
Forum Moderator.