Hello,
I have been trying to root my Micromax A111 aka canvas doodle 1 not doodle 2.
I've reasearched on this and the common methods to root framaroot and vroot both havent worked out for me.
I run build no : V01_1030614 firmware.
when i use framaroot it simply crahesh every time i click on gandalf exploit and in case of vroot i download the chienese software but when i connect the phone to the system it says that USB Debuging is off on my phone even though i've turned on usb debugging.
Any help on this matter ?
Think it depends on which version of Framaroot you are trying on what firmware is on the device. For the USB Debugging connection to the PC, this is most likely from driver issues. Check your Device Manager to see if there is a yellow exclamation mark next to the device name. As far as rooting goes, I would suggest Kingo Root.
http://www.firedrive.com/file/506D8AB5C3B714C9
Install, open as admin, and follow the instructions. It might even be able to download and install the drivers for you (it does that for some devices, but am not familiar with Micromax stuff) If not, you might check out installing PDANet as it has drivers for about everything.
Thank you seems my phones stock rom was the problem is there any way to update the android version from4.1.2 to 4.4 ?
So were you able to root then or ...?
And Micromax is trying to get 4.4 ready. Release date unknown.
http://micromaxcanvas5.in/micromax-android-4-4-kitkat-update-schedule-for-april-may-2014.html
Bro...try root master app...it worked for me..
I was having same problm with framaroot and v root....
But root master worked for me
Sent from my S280 using XDA Premium 4 mobile app
Related
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
ashwanid said:
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
Click to expand...
Click to collapse
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Please try installing Towelroot on your device and using it to obtain root. It will root many Kitkat devices.... uses a few different exploits to achieve root access.
There is a LifeHacker thread on it here: http://bit.ly/1qAobRl
I tried baudi root to root my device. The Chinese superuser is installed but there is no root access. And that superuser apk made my tablet sluggish. Can u tell how to remove the superuser.apk. my tab isn't rooted.
And towel root and many other apps doesn't work.
Thanks
And I want to tell that first I installed kingroot and my tab was rooted. But game killer was not working then I unrooted . then again tried with baudi root but It made my tab sluggish.
Please help to remove that superuser
Download the latest kingroot.
uttam27 said:
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Click to expand...
Click to collapse
I could get into fastboot mode through adb command "reboot bootloader". However, fastboot screen is blank with only "Fastboot=>" mentioned at bottom left of screen. In bootloader mode device is recognized as "mtk6582_phone". I don't have the phone ROM file that could have been used to create custom CWM recovery and without root I cannot backup the phone ROM. One-click root methods fail. Any ideas?
Try to root with kingroot it rooted this device.
Download the latest version of this app.
ashwanid said:
Try to root with kingroot it rooted this device.
Download the latest version of this app.
Click to expand...
Click to collapse
I am little skeptical about using methods that are not well-known. You mentioned you faced some issues after this..?
I tried Kingo but it failed
I said to use kingroot and not Kingo root. Download it here kingroot.net
So here's the long awaited root!!!
Just use the following root tool. I just Used it myself
Its called root genius
Download it here
htt p :// downloa d1766 . mediafire .com /9g59 3gbw8bjg/j17ivc iz1x808wo/RootGen ius_v2.3.0.zip
Just backspace the spaces in the link and copy it to the address bar of your browser then press enter to download the file.
This is because i couldn't post a link
I am sure this works fine
it worked fine for me
Connect the Tablet to your pc and click on root
That's it
Congratulations! You have rooted your tablet...
Hope this Helps
Regards
Adarsh Mathai
Just use iroot (also known as vroot) Easy steps starts here:
1. DOWNLOAD iroot /vroot
2.Use ur usb cable and connect ur phone to pc
3. Put ur phone in usb debugging mode available in developer option
4. IF u dont have developer option then go to setting->about phone and continously click build number till you get notified.
5. And open vroot and let it detect ur phone. It will ask permission so give permission from ur tablet. It will download and install some drivers.
6. U can see there is a option to root ur phone go ahead and click it
7. Ur tablet may restart so don't. Pannic
Volla rooted ur iball
Hi I have been trying to root my Android device.
Maximus Max-909
Android 4.0.4
Software I tried:
Farmaroot
Towelroot ( Doesn't support my device )
KingRoot
Root Genius
mt6589_rooting_pkg
Cydia Impactor (Can't find Driver software Err Msg: Write:No space left)
Root_with_Restore_by_Bin4ry_v36 (Method 3, 5)
Note: I Checked with Root Checker if Root worked
I did a factory data reset after I tried each Method
About the driver software:
The driver software is working. I am sure of this because I am a beginner at developing
Android application and I have been running my Soft from eclipse using USB Debugging on my phone.
I also used SnapPea which works fine for connecting my Android to my Computer.
But in the Device Manager it shows my device "YunOS Phone" insted of "Android Phone" (using Windows 8.1 Laptop)
My Driver name is YunOS ACB Interface.
I have been trying this for Almost a week.
I really need some Expert help on this. Can anyone please point to the right direction.
have you tried with Vroot it seems good ?
if you succeed you have to change chinese supersu ( google search )
It worked
jean.michel.78 said:
have you tried with Vroot it seems good ?
if you succeed you have to change chinese supersu ( google search )
Click to expand...
Click to collapse
Hi, Thanks :good: for your suggestion. VRoot installed a SuperUser ( Kinguser ), Its English. But when I checked with Root checker it still shows No Root Access. I repeated the whole process. I think I missed a step ( VRoot shows my phone is rooted ).
Can you please tell me what should be my next step.
@Firefly244
Try Towelroot. Press the Lambda (greek letter) to download it.
https://towelroot.com/
Doesn't work
christi9503 said:
@Firefly244
Try Towelroot. Press the Lambda (greek letter) to download it.
Click to expand...
Click to collapse
Towelroot doesn't support my device. Sorry I should have mentioned it before. Thanks anyway.
dont try several tools if you have succeeded with vroot you can damage your device
you can check by typing "su" in a terminal emulator
after you have only to switch chinese supersu by chainfire supersu
http://forum.xda-developers.com/showthread.php?t=2532818
after you can test get titanium backup who ask to be root
and you can suppress applications you dont want be carefull anyway
Rooting your Huawei Honor Holly
Things that you need:
1) USB Cable
2) Drivers installed
3) USB Debugging enabled
4) IROOT Android PC Software
Download IROOT PC Software (Google can find you the link)
Connect your phone with USB debugging enabled and run IROOT software and follow the on screen instructions to get your phone rooted.
Once everything is complete download the latest version of SuperSU (Chainfire) from google play store and install as usual.
Finally uninstall all the chinese softwares that were installed through IROOT.
That's it your Huawei Honor Holly (HOL-U19) is rooted.
Method 2: Install the attached apk and have root.
I am in noway responsible for bricking your device, I am not a developer just found this method on google and it works and all credit goes to the original poster.
root failed
Bro..I have done that what u have said...but rather than root my phone it installed 3apps..and it shows root failed in PC app
a.jameelrahman said:
Bro..I have done that what u have said...but rather than root my phone it installed 3apps..and it shows root failed in PC app
Click to expand...
Click to collapse
Which method did you use apk or pc method
PC Method works fine
i tried both pc as well as apk method...
Kindly explain how to root through using PC method...I explain the process which resulted in failed...firstly I connect the mobile with debugging option enabled...then I open the IRoot,which I already installed the latest one in my PC....it shows hold u19 is connected..then I click the root button...after a while my mobile reboot and the PC app I.e.,Iroot shows root failed....even I use apk method it also shows root failed.usepc app.....
a.jameelrahman said:
Kindly explain how to root through using PC method...I explain the process which resulted in failed...firstly I connect the mobile with debugging option enabled...then I open the IRoot,which I already installed the latest one in my PC....it shows hold u19 is connected..then I click the root button...after a while my mobile reboot and the PC app I.e.,Iroot shows root failed....even I use apk method it also shows root failed.usepc app.....
Click to expand...
Click to collapse
Install Rootchecker from Google Play to check if the phone is rooted. Were there any chinese softwares installed through IRoot
i tried
Using root checker basic apk,I check....but it shows No root permission.....and while rooting using Iroot PC method 2Chinese software installed
Good
use this..
http://forum.xda-developers.com/chef-central/android/root-honor-holly-hol-u19-pc-t3110745
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Finally got it rooted with KingRoot
Just noticed that the build.prop has the ro.build.id-LMY47V
That's the 5.1.1 for the 2013 Nexus 7
OldMansGhost said:
Finally got it rooted with KingRoot
Click to expand...
Click to collapse
Hi I would to know how you rooted the Coolpad Rogue 3320A. I was looking at Kingo root and KingRoot and they dont give good instructions.
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.
The version of Windows KingRoot I had success with was KingRootSetup_v3.1.0.1125_105002.exe downloaded from kingroot.net
There's a setting in the developer options to allow the bootloader to be unlocked. I've not tried to fastboot to work yet.
"Vanilla" ROM or at least vanilla dialer/phone apps?
I'm interested in some kind of vanilla dialer/phone/telecom app set (5.1.1 based) or a full ROM that's AOSP so that I can toss out T-Mo's "Wi-Fi Calling" and use the built-in Android SIP client with its normal configuration screens.
If anyone has accomplished the same with this device or any other T-Mo 5.1 based device, please let me know. I'd really like to be able to configure the system dialer to connect to my SIP PBX directly rather than use a half dozen hacks to give me half-working VoIP calling of my own.
(Note: If there's a T-Mo 4.4 based image out there, that would suffice, as I can at least make VoIP apps intercept dial requests, which T-Mo Wi-Fi Calling prevents on 5.1. This device shipped with 5.1, but it might be possible that a similar model's ROM image might work on this as well.)
/system image
anyone with a rooted 3320a that might be able to provide me with a stock(or rooted stock) image of /system? i managed to softbrick my device after rooting and i forgot to do a dd of the system partition before mucking around in it
thanks in advance
Root Genius Might Work
venuspcs said:
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Click to expand...
Click to collapse
My Arise don't have a custom recovery either. This kind of disappoints me, as this phone is a good phone for the price.
However, I thought I'd share with you guys that Root Genius may also work to root the Rogue as it does root my Arise. (I don't own a Rogue, so I can't confirm this.) It's always better to have more than one way to root your phone safely right?
Kingroot
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.[/Q UOTE] I opens kingroot in my browser and used it for translation
Click to expand...
Click to collapse
hi guys,i av rooted coolpad 3320a with kingroot windows version but when i try to unlock with sigma box it says root the phone first. Anyone with a solution pliz help. Thanks in advance
KingRoot (Android version) worked for me
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
myoshinaga said:
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
So what is the final verdict?
Click to expand...
Click to collapse
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
got it working with kingo root, but only after kingroot said it worked. otherwise kingo root kept freezing. havent been able to get supersu installed but kingo root works just fine
I was able to root the coolpad rouge without a computer. I'm going to create an account and upload the tut. -cyphermil
myoshinaga said:
So what is the final verdict?
Click to expand...
Click to collapse
You CAN root this with the Kingroot apk.
I'm new and can't post links so to make the links below work just abbrev the http and add a colon.
As soon as I can post links I will fix them.
PROOF:
Hypertexttransferprotocol//imgur.com/a/SXmMc
Here's what I did:
1) download latest kingroot Hypertexttransferprotocol//androidmtk.com/download-kingroot-application
2) enable USB debugging in developer options
3) enable OEM boot loader unlock in developer options
6) enable unsigned APKs
7) install kingroot apk
8) run kingroot
9)?
10) PROFIT
Will update with better details later. Sorry for mistakes and formatting I'm on my rooted coolpad rouge.
Kotetsukun said:
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
Click to expand...
Click to collapse
Busybox is safe to install. Will post screenshots when I am able to include links
Never mind. I am happily satisfied anyways. Thank you.
Coolpad Rouge 3320A
So im am writing this post via on my mac...
So i want to root my phone but when i tried to install king root i got to 90 percent then the app closes its self and disables my wifi unless i reboot my phone.
im just need to root my phone for to install xposed framework and installer
~Ninja, Aug/13/16
how to root micromax canvas juice 3 model Q392 lolipop 5.1 cpu mt6580 plz expert help me
Try to root with
1. Kingo Root ( Kingoroot Android )
2. Kingo Root for windows ( Kingo Root Windows )
1. Procedure :
1.) Download and install Kingo root apk from the link provided.
2.) Simply click on "one click root"
3.) Rooting will start and If rooted successfully then device will restart.
IF this not works for you then follow the next.
2.Procedure :
1.)Download Kingo root for windows from link provided.
2.)Install on PC.
3.)Start the application
4.)Connect your device with USB and click on "ROOT" on pc.
5.)It will start rooting your device.
6.)Rooting will take few minutes.
7.)IF rooted successfully device will restart.
Done!!
IF first one not works then try second one.
Second one mostly works.
Ask if stuck in any problem.
And Give " Thanks "if this works for you.
Good luck!